Material issuing for an operation

Dear Gurus
Can we issue material for a particular operation in a production order ?
Regards
Sandip Sarkar

Hi
As our forum members told, assign the particular component to the particular operation.
so when ever you issue the component for the production order.
(you cannot issue the component for every operation. normally GI will take place for as per the production order) .
so when we do the confirmation operation wise, the operatio consume the component which assign to the operation.
this what happened in the sap.

Similar Messages

  • HT5228 I am running OS 10.5.8 on an iMac. There is no security update issued for this operating system - it only covers 10.6. Is my comuter vulnerable? Do I need to do anything?

    I am running OS 10.5.8 on an iMac. There is no security update issued for this operating system - it only covers 10.6. Is my comuter vulnerable? Do I need to do anything?

    I'm still not clear why Apple only issued security updates for 10.6 and later. I assume they think we should all update our operating systems or maybe they are just focusing on the majority of users?
    Apple has had a long standing policy of only supporting the current and previous operating system releases.  Whether they decide to make an exception for even older releases is anyone's guess.
    You can send them feedback to express your opinion.
    Or does the new Trojan not affect older OS? I'd like to know , if anyone has information.
    As far as is known, it does affect older unsupported releases.  Disabling Java in your web browser is the current preventive approach (and that is a community derived approach)

  • Excess material issue for subcontract should not be add in GR

    Hi,
      I have one problem,   we have one Finish materia   X   for making one    X we use three raw material  A,,B & C to make one X 1 qty of each A,B,C required  so while we make the GR for one X  we issue One A and B  but as C is having std. packing of 5  so we want to issue the 5 qty of C to vendor,  now    when we make the GR   for X  with MB01,  first we ahve to give the Qty. of X material  so we ahve given  1  as the PO is for 1 qty  X , then we ahve to give the qty. of raw materials for A,B,C   here sytem first automatically taking qty. 1 for A  one for B  and 5 for C  but we want that as only one C is required to make one X  so sytem should take only one C qty  and remaining 4 qty. of C should be with vendor  stock  that we wil adjusct in next PO for X materail  and challna should be close properly,
        How we can handle this.
      regards,
        zafar

    Hi,
            I want to transfer the material with ref. to purchase order only, so that all the material which are present in that PO should automatically conme in the MB1B for transfer of material,
            Is there any other way such that while making GR the qty. will come as per BOM only for consumptio.
      regards,
       zafar

  • Different exchange rate on each material issued for order

    Hi all,
    I have strange situation like this. Controlling area currency is USD and object/company code currency is THB. When i do Good Issue for production order, system use different exchange rate for each material although all of these material are posted on the same posting date for good issue.
    Example :
    I do Good issue material A and material B for production order 100000 at posting date 01.03.2008. When i look into cost analysis and look for USD currency, i found that exchange rate for material A is 30 THB/USD and exchange rate for material B is 25 THB/USD. FYI i use exchange rate type m. How can this happen?? How can each material have different exchange rate although its transaction at the same posting date??
    I'm waiting your advice.. Maximum point will be given.
    Best regard,
    Yudha

    I think its a bit misleading...The requirement is to post an Invoice with a base taxable amount of  Exchange Rate A and a tax amount of Exchange Rate B. The Base Currency is JPY and the System Currency is SGD. So the Report S_ALR_87012357 should see the amount in SGD there. The Issue is caused by the different exchange rate on the tax amount submitted by the Vendor Invoice.
    Example: Vendor Invoice Amount: 926,413.00 JPY, then we created PO to Invoice with Base Currency JPYalso amounted 926,413.00 JPY. However, in the Vendor Invoice Amount, the Tax Chargeable is 923.00 SGD (based on their exchange rate 65.66 JPY per SGD). But our Exchange Rate (System Rate) is 63.49 JPY per SGD. How can we reflect the Tax Amount as 65.66 JPY but still the correct SGD amount is based on the Vendor Original Invoice Exchange Rate 65.66 and not the System Exchange Rate, 63.49 in the same Invoice Creation (MIRO)?

  • Scheduling issue for splitted operations in process order

    Hello All,
    I am facing problem after scheduling splitted operation in process order. The scenario is as follows.
    In process order there are 5 operations. 10, 20, 30, 40 and 50. Out of the above operations 30 is splitted and two different resources are assigned to it. Control key assigned to splitted operation (30) is also scheduling relevant. Now the flow of operations will be as below.
    1. Operation 10
    2. Operation 20
    3. Operation 30 - Operations is splitted (Resource used is A), qty to be produced - 10 kg.
    a. Operation 32 - Quantity of operation 32 is changed to 5 kg. Resource used is B.
    b. Operation 34 - Quantity of operation 34 is changed to 5 kg. Resource used is C.
    4. Operation 40
    5. Operation 50
    Relationship exists between opearion 10-20, 20-30, 40-50 and between 30,32, 34 with 40. But there is no relationship exists between splitted operations 32 and 34 with any of the previous operations for eg. 10 & 20.
    Issue is after scheduling all operations relationship remains maintained between operations 32, 34, 40 & 50. As operation 30 is splitted to two different operations equally total time for scheduling gets reduced but after scheduling of all operations all previous operations before operations 30 does not get resceduled? Scheduling type maintained for order is Backward Scheduling.
    Please check this and guide me how all operations before operation 30 can be rescheduled as per changed timing of operations 32 and 34.
    Best Regards.
    Edited by: Avinash Mohite on Mar 19, 2010 12:43 PM
    Edited by: Avinash Mohite on Mar 19, 2010 3:14 PM

    Hi,
    I hope u r doing in this way:
    In the capacity header screen enter individual capacity as 2. then click on Got( on top of same screen) and go to individual capacites. Enter the names of two individual capacities, for example 1 and 2. These are the names of two work centres where u r splitting ur operation.
    Double Click on operation 0030 and go to tab 'splitting' . Tick on ' required splitting' and enter maximum no. of splits as 2.Then go to capacity requirements assignment tab. enter the individual capacity as 1 and 2 and enter the splitted quanitites.Save and reschedule .
    Check and revert.
    Regards.

  • Material issue for subcontracting PO

    while issuing the material for subcontracting PO with TCode MB1B mov type 541 when i am giving more quantity then the subcontracting PO it is posted how it is possible. Please help...
    For an instance i am giving quantity 10 in Subcontracting PO and giving 12 quantity in MB1B, its posted...

    Hi,
    Yes , With MB1B if your sending materials to Subcontractor you can send more qty then then PO qty system will allow you , there is no controle.If you want to send as per po qty then use ME2O transaction.

  • MB1B - Bulk material issue for sub-con PO

    Hi All,
    For a subcon PO, the user has by mistake done a transfer of a bulk material using MB1B. The vendor has used this material as well. Now when i receive the material from the vendor, this bulk material is not consumed by this PO with a 543 mvt, which is normal.
    But the issue is, this item is now shown as lying with sub-contractor, & there is no way i can post a 543. I can post a 542 & reverse the issue, but then how do i treat this stock?
    Hope my question is clear, await inputs.
    Regards,
    Vivek

    Hi Vivek,
    Thanks for your explanation.
    Still I have doubts. Are you speaking of bulk material in terms of BOM?
    I haven't got experience with them BUT SAP help definetly says that bulk material is not 'withdrawn specially for the order' and 'a bulk material item is only for information'.
    http://help.sap.com/saphelp_46c/helpdata/en/b1/c043f4439a11d189410000e829fbbd/frameset.htm
    Considering this, we cannot expect consumption by mvt 543 of bulk material when GR against subcon-PO takes place.
    It's only my opinion so please think about this yourself as well.
    BR
    Csaba
    Re: Items with Bulk Indiactor in subcontracted assembly.
    http://www.sapfans.com/forums/viewtopic.php?f=9&t=289342&p=869693&hilit=bulkmaterialconsumption#p869693
    http://www.sapfans.com/forums/viewtopic.php?f=6&t=310542&p=938766&hilit=bulk+material#p938766

  • Material issues for equipment from already issued materials for FL(Func Loc

    Hi,
    At my client place, the working nature is 24x7. Store is closed by 3:00PM and no material is issued after that. So, Departments get issued materials for the Functional location at once and distribute(consump) materials for Equipments as per requirement under that Funcitonal location. Our client wants that when material is consumped for equipments it should be issued from functional location issued materials.
    E. g. : For the funtional location "SSSL-1000-DG" 50,000 litre oil has been issued. Now, for lubrication of Equipments under this Functional location, Oil should be issued(debited) from this functional location. suppose, 1000 litre has been consumped for "ABC" Equipmnets. So, balance Oil of Functional location will be 40,000 litre.
    Please help me.
    Dinesh.

    Hi Dinesh,
    Generally material/consumption booking is done thorugh warehouse only.
    Once you issue the material from warehouse against F.L. cost center it will get updated with that F.L only.
    If you want that material to be booked against equipment then you need to issue against equipment only.
    You can create another store at maintenance side. Or just take the material from store and on next day book against required equipment.
    Sundar

  • Rerendering issue for download operation

    I have the following requirement
    1. User clicks on a commandButton(Implemented using h:commandButton)
    2. User is presented with Save Dialog box to save an xml in the desired location.
    This works fine as expected in IE and Firefox.
    But I'm facing following issues:
    1. After this operation when i click any button to open a modal panel, it is not opening(Problem only in IE7 not Firefox)
    2. Also I want to display a success message after download operation. Due to page rendering it is not displayed.(Problem both in IE7 and Firefox)
    3. I have attached a status processing image with the h:commandButton but I think the h:commandButton does not have oncomplete
    event so even after Save Dialog Box is closed the status processing image is not closing (Problem both in IE7 and Firefox)
    Note:
    1) I tried using a4j:commandButton instead of h:commandButton, but the Save Dialog box was not displayed.
    2)I'm using tomcat 6.0.14 and richfaces 3.2.1
    3)The xhtml is actually embedded within frames. If i try accessing the xhtml directly without frames then the modal opening issue is not reproduced.
    Code:
    ManagedBean:
    FacesContext ctx = FacesContext.getCurrentInstance();
    if (!ctx.getResponseComplete()) {
        try{       
         String strMIME = "application/xml";
         HttpServletResponse response = (HttpServletResponse) ctx.getExternalContext().getResponse();
         response.setContentType( strMIME );
         response.setHeader( "Content-Disposition", "attachment;filename=\"" + "TestDAta.xml" + "\"" );
         ServletOutputStream out = response.getOutputStream();
         out.write("<xmlfile></xmlfile>".getBytes());
         out.flush();
         out.close();
         ctx.responseComplete();
        }catch(Exception e){  
         System.err.println("Finish read end of file...");  
    }xhtml:
    <h:form id="details">
         <h:panelGrid columns="1" >
              <h:commandButton  value="Open Save Dialog" action="#{saveDialog.openSaveDialog}" onclick="javascript: Richfaces.showModalPanel('downloadModalPanel',{left:'auto', top:'auto',height:'50px',width:'130px'});" oncomplete="javascript: Richfaces.hideModalPanel('downloadModalPanel');" />
         </h:panelGrid>
         <h:panelGrid columns="1">
              <a4j:commandButton  value="Open Modal" reRender="moviesModal" limitToList="true" onclick="Richfaces.showModalPanel('moviesPanel',{left:'auto', top:'auto',height:'100px',width:'100px'});" />
         </h:panelGrid>
    </h:form>Edited by: Leela.C on Apr 20, 2009 5:04 AM

    I think ctx.responseComplete() causes HTTP response for a request to complete
    without rendering the component tree.
    Note: Without ctx.responseComplete() I'm getting following exception on the page
    SEVERE: Error Rendering View[index.xhtml]
    java.lang.IllegalStateException: Servlet response already use stream, Writer not possible
         at org.ajax4jsf.webapp.FilterServletResponseWrapper.getWriter(FilterServletResponseWrapper.java:226)
         at com.sun.facelets.FaceletViewHandler.createResponseWriter(FaceletViewHandler.java:399)
         at com.sun.facelets.FaceletViewHandler.renderView(FaceletViewHandler.java:556)
         at org.ajax4jsf.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
         at org.ajax4jsf.application.AjaxViewHandler.renderView(AjaxViewHandler.java:189)
         at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:110)
         at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:100)
         at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:139)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.ajax4jsf.webapp.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:154)
         at org.ajax4jsf.webapp.BaseFilter.handleRequest(BaseFilter.java:260)
         at org.ajax4jsf.webapp.BaseFilter.processUploadsAndHandleRequest(BaseFilter.java:366)
         at org.ajax4jsf.webapp.BaseFilter.doFilter(BaseFilter.java:493)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:584)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
         at java.lang.Thread.run(Thread.java:595)

  • Raw material issue for inspection from inspection lot

    Hello friends,
    My sample size is fixed i.e.75 gm for all  raw material quality testing. I have defined sampling procedure with sampling type "fixed sample". I want that this amount should be decreased from total lot quantity when i am posting it to unrestricted use. i.e. for 10 kg inspection lot quantity, 9.925 kg quantity should be posted .Now, system propose whole quantity for stock transfer from quality to unrestricted after usage decision.
    Waiting for reply!
    Thanks in advance!!

    Dear Kiran
    1)  System doesnot take decimal in samples. if your basic unit is KG and you procure 10kg material system will consider sample amount as 1 kg. it will not take 0.075kg as the sample.
    2) Other option is make the procurement in GMs but that  will be difficult for purchaser to handle
    3) or esle make use of this exit and do the posting based on that
    QEVA0009 - UD: Predefinition of quantity to be posted to sample stock 
    This will help
    Regards
    Gajesh

  • Material issued for Production order

    Hello Friends,
    Is there a report in SAP that gives the quantity of material with drawn for  a production order.
    Eg: When run by a part number ...report should give the production order number and the quantity withdrawn.
    COOIS when ran by component number gives the lit of all components in the production order.

    Hi,
    As for standard transactions:
    You can use report COOIS that was mentioned by you - within the report you can filter the part number. MB51 is also goods for reporting, but you have to filter for PrdOrd no. within the report...
    Or you can customize those transactions putting the necessary selection fields or write an own query.
    Regards,
    Csaba

  • Material Issue for both MTO & MTS

    Dear Guru's
    I have to do REM Backflush for a MTO scenario.
    The corresponding raw material are available in stock which was not purchased over a period of  time.
    When I try to do post with correction the system is not allowing me to do the posting, the system is giving error as sales order item is not available.
    Can anyone help me consumming the raw material available in the stock .
    Is there any settings to be done to consume the material which is available in the stock for bothe MTO & MTS.
    Kindly do the needful.
    Helping hands will be appreciated with good points.
    Thanks & Regards,
    Arul.

    Hi Arul
    Please check the below in your DEV server.
    If you put the Individual/coll indicator to 2 in MRP 4 view in material master the raw materials can be taken from unrestricted use stock while back flushing.
    Or
    IN MB1B you can use mvmt type 412E to convert unrestricted use stock to sales order stock.
    SO u can do the backflushing after the conversion.
    Cheers
    JOJI

  • GI for every Operations, not for whole production order

    Hi,
    I have assigned the components into operation and would like to do goods issue for every operations.
    But MIGO or MB1A only do goods issue for whole production order, there is no selection fields for operation no.
    How can I only do the good issue for production order by operations?
    thank you very much.
    Best Regards,
    John H

    Hi,
    You can do goods issue for each operation using backflushing while confirming each operation.
    In CA02 that is in routing go to component allocation select the components which you want to issue for certain operation and select new assignment. In new assignment select the operation.
    In the same manner select the components which you want to issue and assignment it to operation.
    Hope it will help you.
    Regards,
    Alok Tiwari

  • Report for Material Issued against Service Orders But not Billed.

    Hi Experts,
    For CRM Service Orders Based on the Reservation number generated in CRM we will make the Goods issue document in ECC.
    My Question In CRM Do we have any standard report to see Material issued against CRM Service orders but not billed. i.e. Work in progress.
    Thanks in Advance,
    Abhinesh

    Hi Vivek,
    What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
    You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
    (Sorrowully I don't know which logical database would be good for you)
    BR
    Csaba

  • Standard report for - Daily Store Material Issue

    Hi All,
    Can any one let me know which standard report gives me the details for "DAILY STORES MATERIAL ISSUE" in Oracle Inventory.
    Thanks
    Sunil

    You can try the "Transaction Register" report and narrow it by transaction type and subinventory.
    Hope this helps,
    Sandeep Gandhi

Maybe you are looking for