Material replication issue from R3 to CRM

I am trying to do an initial of R3 materials to CRM. Product Hierarchies are migrated to CRM without any issues. when I am trying to select a single material and perform down load to CRM it says "Assignment of product control inconsistent for country GB".
I tried different ways of maintainign product tax classifications at crm, img > spro > crm > basic functions > taxes > basic settings > tax types and tax groups > assign tax groups to ecc tax classifcations (product).
still I see the error when I go to SMW01.
any help is appreciated.

Hello Sadhy,
Check table   CRMC_TAX_MAP for correctness of records.
And also check below customizing paths:
In ECC,
SPRO >IMG >Sales and Distribution (SD)   >Basic Functions >
Taxes   > Define Tax Determination Rules
SPRO >IMG >Sales and Distribution (SD)   >Basic Functions >
Taxes   >Define Tax Relevancy of Master Records
In CRM customizing,
SPRO   IMG >
CRM->Basic Functions->Taxes->Basic Settings->Tax Types and Tax Groups->
Assign Tax Groups to SAP ECC Tax Classifications (Product).
Make sure that ECC and CRM customizing are in-sync.
Also, run txn:CRM_TAXCUST_VALIDATE in CRM       to check for the correctness of tax customizing data.
Hope this helps!
Best Regards,
Shanthala Kudva,

Similar Messages

Material Replication problem from SAP ECC to CRM 2007

I am trying to load material data from SAP to CRM. Materials are in general coming across however i have a lot of errors visible in smw01 with the following entries:
@0A@     BDoc validation error     PRODUCT_MAT     mBDoc Validate     06/04/2010     14:20:05     QAS100     R3AI_MATERIAL     MW_RFC_USER     DF6FDBE147AC2EF1B467002264F6091A
On closer examination i can see that the specific issue relates to teh following:
A key was used twice for multirow set type CRMM_PR_TAX
    Message no. COM_PRODUCT512
I can see on closer examination of the individual entries why the issue is occuring when i show the Bdoc message extra data I can see that there are multiple entries for CRMM_PR_TAX
CLI PRODUCT_GUID                     TAX TAX TAX_ TAX_GROUP            TAX_TARIFF_CODE T C VALID_FROM          VALID_TO            UPNAME       H LOGSYS
400 00000000000000000000000000000000 IE      MWST NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
I also note that the PRODUCT_GUID is blank 00000000000000000000000000000000 whic shouldn't be the case.
It's just not clear to me what i need to do to resolve the issue
Any help would be greatly appreciated
Regards
Eddie

I am trying to load material data from SAP to CRM. Materials are in general coming across however i have a lot of errors visible in smw01 with the following entries:
@0A@     BDoc validation error     PRODUCT_MAT     mBDoc Validate     06/04/2010     14:20:05     QAS100     R3AI_MATERIAL     MW_RFC_USER     DF6FDBE147AC2EF1B467002264F6091A
On closer examination i can see that the specific issue relates to teh following:
A key was used twice for multirow set type CRMM_PR_TAX
    Message no. COM_PRODUCT512
I can see on closer examination of the individual entries why the issue is occuring when i show the Bdoc message extra data I can see that there are multiple entries for CRMM_PR_TAX
CLI PRODUCT_GUID                     TAX TAX TAX_ TAX_GROUP            TAX_TARIFF_CODE T C VALID_FROM          VALID_TO            UPNAME       H LOGSYS
400 00000000000000000000000000000000 IE      MWST NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
400 00000000000000000000000000000000 US      UTXJ NONE                                      06/04/2010 13:20:05 12/31/9999 23:59:59 MW_RFC_USER    QAS100
I also note that the PRODUCT_GUID is blank 00000000000000000000000000000000 whic shouldn't be the case.
It's just not clear to me what i need to do to resolve the issue
Any help would be greatly appreciated
Regards
Eddie

Downloading Material Master data from ECC to CRM

Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

Hi Rghunandan,
To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
First download the customizing objects using R3AS
DNL_CUST_PROD0 u2013 Material number conversions
DNL_CUST_PROD1 u2013 Product : Categories
DNL_CUST_PROD3 u2013 Material : R/3 sales status
DNL_CUST_SPROD u2013 Sales product item
DNL_PLANT - Plant
To download products foll the steps below
1.Defining Product ID Settings -COMCPRFORMAT
Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
The material master length is R/3 is defined in transaction code OMSL and is set to 18. (also check note no. 545824)
2.Make sure that CRM item categories and R/3 item categories are the same.
In CRM, item categories and item category groups are seen via
Customer Relationship Management  Transactions  Basic Settings
3.Selecting specific objects for replication : R3AC1
Use adapter object MATERIAL
Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
4.Replicate Materials : R3AS
mention the adaptor object Material and execute
Regards
Itty

Optimization of raw material while issuing from the stores

Dear Techies,
I need a small information regarding,Optimization of raw materials of "arc shape "while issuing from the stores it self.
I will explain this with an example.
Say we require a flange ring.This flange ring can be manufactured using three -120 deg segments.
while calling the raw material below the flange rings material ,we have to give raw material dimensions of " 1X120 deg segment".System will accordingly multiply for the requirement of 3-segments.
In this situation is there any possibilty to " Club" the raw material to minimize the scrap,ie., we can accomdate another segment just below the other segment.With this type of arrangement I can optimize raw material required.
Is there any possibility in SAP that I can address this situation.
Thanks In advance,
With best regards,
Kiran.

Hello,
according to my knowlege it is not possible in SAP.
you have to create interface with Softwares like PRO-E sheet metal.
Regards
AM

Sales Order replication issue from SAP CRM (7.0) to ECC

Hi,
I have issue in replicating the sales order from CRM to ECC below are the issue details ...
Issue:
Sales Order is created in CRM and Mbdoc is generated with status:001 (Yellow state),Order is not replicated to ECC system.
I am trying to Replicate the sales Order1.Created Trnascation type: ZLS1 in CRM
2.Number range assigned as Internal in CRM and External number range in ECC
3.Item categories has been defined in Both the system.
4.SMOEAC settings are completed successfully.
5.Maintained table:SMOFPARSFAin both systems.
Checked Couple of things:
1.No items found in SMQ1 (Out bound queue ) in CRM
2.Checked in SMQS,none of the entries found.
Please let me know if i missed any of the settings to replicate the sales OrderPlease help us on this regards ASAP
Thnaks.
CRM Consultant.

>
Robert Kunstelj wrote:
> Check in status shema of that order that it doesn't block distribution to R3.
>
> Also check that you don't have any fillters set in R3AC1.
>
> And also tell me, do you see in SMW01 CSA mbdoc for that orders? If yes, are they in red state and when you select one and click on button Show bdoc message extended data, do you get structure or not?
>
> Regards.
Hello Robert,
Here is the answers for the questions raised...
1. I checked status schema ,understand distribution status is " To be distributed " in the sales order in CRM
2.In R3ac1 ,standard document "SALESDOCUMENT " doesn't have the any filter setttings related to my transaction type.
3.Mbdoc (Notification ) is generated in SMW01 with status " 001 " (Yello state),failed to reprocess the Bdocs.I coudn't able to find the Outbound queue in CRM for the corresponding order in CRM.
4.I can see the Bdoc structure in the extended data in SMW01.
Thanks.
Sathya.

Equipment Replication Error from ECC to CRM

Hi,
We are trying to replicate the Equipments form ECC 5.0 to CRM 2007 facing some error in CRM like inbound queue is not generated and our queue generated with status SYSFAIL error massage is u201CBAPISTRUCTURE_NAME_UNDEFINIEDu201D. I checked in ECC out queue status is STOP. We are done the Material Master and Customer Master Data Replication form ECC to CRM successfully. Activated the Equipment related objectives and done the Initial Load we are facing the problem for Equipment.
Please advise me
Thanks in advance.

Hi,
In the SAP Help of Equipment Replication from SAP ECC to SAP CRM following are prerequisites:
Integration
The initial download of data is triggered in SAP CRM and is executed by middleware. Uploads and delta downloads take place automatically when data is changed in SAP CRM and SAP ERP respectively.
To use this function you require the following releases, or higher:
■SAP CRM 7.0 (with active middleware)
■SAP enhancement package 4 for SAP ERP 6.0
You can have a look at the full help link @
http://help.sap.com/saphelp_crm70/helpdata/en/46/cc79505ec61525e10000000a114a6b/frameset.htm
Can you check the Bdoc Messages and mention the Error and the Status of the Queues of the Equipment Adapter Object EQUIPMENT.
Hope this will help.
Thanks,
Samantak.

Debugging Middleware/BDOC when the material data transfered from R3 to CRM

Hi,
I am updating the status of Product in CRM using BADI - PRODUCT_CUSTOMER2 (R3_TO_CRM_MATERIAL). This happend when the status is updated in ECC (MM02).
Now the problem is, I want to debug this BADI, when the material is updated in MM02.
Could you please help me, how can I debug this BADI.
Thanks,
Sandeep

Hello Sandeep,
Please check below general steps to debug the delta download of ECC material.
in R/3
Set a break point in the function module CRS_MATERIAL_COLLECT_DATA (BTE Implementation)
Create/Change the material in R/3 by using transaction MM01 or MM02 and press save button.
Now you can debug the function module CRS_MATERIAL_COLLECT_DATA
in CRM (inbound queue)
Deregister the inbound queue R3AD_MATRIA* in transaction SMQR
Go to the transaction SMQ2 select the inbound queue and debug the queue
Set a break point on the mapping function module: COM_MAP_BAPIMTCS_TO_PROD_MAT
for validation debugging Set a break point on the validation function module: COM_PRODUCT_MAT_VALIDATE
I am sorry that I do not know where BADI PRODUCT_CUSTOMER2 is called.
Hope the baove information could be helpful.
Best regards,
Maggie

Customer master data replication probelm from ECC to CRM system.?

Hi..Gurus,
Intial downloading was done for master data and transaction data..but after 10 days.. some changes in ECC system will not replicate to CRM system..delta down loading working or not how i can check ? or i have again do the intial downloading for customer_main..plz help me..?
Truly,
San Rao.

Hi,
make sure that the Middleware is activated in R/3 table TBE11 for
application component BC-MID as below:
Application ID Active Text
BC-MID X Middleware
Also, in R/3 table TBE31 make sure the following even has been activated
00001321 BC-MID PI_BP_CUSTOMER_BTE_1321
In R/3 table CRMRFCPAR make sure that the delta load has not been
deactivated for the object Customer_Main....
If this is ok check filter on the object Customer_Main in trx. R3AC1 in
CRM to make sure they havent filtered out the relevent BP's
If you have a BP expample use CRM trx. CRMM_BUPA_MAP to gather the BP
from R/3 into CRM...this will either lead to a sysfail in CRM SMQ2 or
A short dump in ST22 if there are any errors...
Also, after using trx. "CRMM_BUPA_MAP" check in SMw01 for Bupa_Main
bdocs...if there are errors they will norally be on the validation of
the BP in CRM and the bdocs will have errors...
Regards, Gerhard

Why do we need to define RFC destination and user for material replication

Dear Experts,
why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
regards,
Ranjan

Hello,
As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
You can refer to note 720819.
Regards,
Ricardo

Replication of Material Changes from ECC to CRM

Hi All,
I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
Please can any one help me.

Hi
Do you get any sysfail in the inboud queue (and / or a dump in st22)?
Do you get any errored bodcs?
If yes which error message ID and Number?
Best regards
Christophe

Material replication from R/3 to SRM - Issue with Material group

Hello All,
                  I am working on BADI PRODUCT_CUSTOMER2 and method MAP_R3_TO_CRM_MATERIALMaterial replication part from R/3 to SRM.
I am using a Ztable to map r/3 material group to SRM material group(Product category).
For example Material M1 with material group 100 is transferred to SRM. Material group(Product category) 100 exist in SRM, but I am changing the material group to 200 in the product_customer2 badi. its working fine.
In another scenario, Material with material M1 with material group 300. Material group(product category) 300 does not exist in SRM,
I am changing the material group to 200 in the bdoc, in the product_customer2 badi. It is not working. The LUW is failing in SMQ2 transaction with the error "Error in Mapping (Details: transaction SMW01)". The BDOC is failing with error "Category for material group 300 does not exist"
I tried to deactivate the badi PRODUCT_CUSTOMER2, even then the FM MAP_BAPIMTCS_AND_PROCESS is validating the material group from R/3.
I tried to change the material group 300 to the existing material group 200 at initial stage in debugging in function module MAP_BAPIMTCS_AND_PROCESS but still the bdoc is failing with error "No storage form defined for product type 01 / logical system".
I am doing my testing using the following steps.
1. change the material descriptioni in MM02 in R/3.
2. An item is displayed in the queue in SMQ2 in SRM.
3. I have debugged the LUW and analyzed my badi by setting breakpoint at method MAP_R3_TO_CRM_MATERIAL, its changing the material group in the bdoc properly.
   that didnt work.
   also i tried to change the material group in the function module MAP_BAPIMTCS_AND_PROCESS before the badi is called.
4. I am checking the BDOc status using tcode SMW01 and checking the material using tcode COMMPR01.
can someone tell me how I can change the R/3 material group to SRM material group at the time of mapping in SRM?
Thanks
Sathish PM

Hi find below for the product cat
Steps to create the product category in SRM:
1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
3) Do a test and check if the product category is available for procurement in SC.
Regards,
Satish

REplication of Material Master from ECC to CRM - NO_STRUCT_DEFINITION Error

HI CRM Experts,
I am trying to replicate master data for material from ECC to CRM. I have done the required customizing downloads. Done with downloading of DNL_CUST_PROD0 and DNL_CUST_PROD1. I have got the Material types in CRM with categories R3PRODSTYP, R3PRODHIER & R3MATCLASS. There is no filter setting in R3AC1 for MATERIAL. Now when I am trying to do initial down load for Material through R3AS and monitoring in R3AM1, the status shows running with Block = 0. Having checked in SMQ1, am getting error as System Fail with error Exception Condition with "NO_STRUCT_DEFINITION" raised.
I have checked with the Product structure in ECC and compared with R3PRODHIER in CRM. They are same.
Kindly let me know what am I missing out.
Regards,
Ravindra Valy

Hi,
I had applied the not earlier itself.
Lateron I realized that the note I had applied at CRM end. I have to apply at ECC end aswell.
After applying at ECC end, the problem is resolved.
Thanks
Ravindra Valy

Issue with Replication of Bank Account Numbers from ECC to CRM.

Hi,
I am trying to transfer business partners from ECC to CRM, I see errors in SMW01, stating that Bank Key is not valid for US, I have then performed the Initial load for DNL_CUST_BNKA to tranfer Bank Master Data, but again getting error but this time on BANK ACCOUNT NUMBER. How do I transfer the BANK ACCOUNT NUMBER of Business Partners from ECC to CRM. Before starting the initial load for BUPA_MAIN do I need to run any other Initial load to move the BANK ACCOUNT NUMBERS to CRM?
I have already moved Bank Master data using DNL_CUST_BNKA, but can't able to replicate BANK ACCOUNT NUMBERS, can someone please provide me some steps which I need to perform to tranfer BANK ACCOUNT NUMBER.
Now when I ran the initial load for BUPA_MAIN , all Business partners which do not have BANK ACCOUNT NUMBERS are replicated successfully but the one which have Bank Details did not got transferred and gave errors for BANK ACCOUNT NUMBER, Please provide some suggestions.
Thanks.
Jennifer

Willie,
Thanks for the reply:
Error: BANK ACCOUNT NUMBER ******8547 is not valid
Support pack level:
SAP_ABA 701 0003
SAP_BASIS 701 0003
BBPCRM 700 0002
Thanks.
Jennifer

Issues in employee replication from ECC to CRM through ALE/IDOC

Hi,
We are replicating the employees from ECC to CRM through ALE/IDOC.
Some times for some employees, the Idoc status in CRM is 52(Application document not fully posted) in CRM (WE02 tcode)
If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
What I need to do now to avoid this.
Pl suggest
Regards
BABU.

Hi Babu, I'm having the same error when I replicate my employes. I have define BPCCOD in spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers, but this configuration does not resolve my problem.
Could you resolve this problem?.
Pls. let me know...
Regards,
George

Material replication from ECC to SRM

Dear SRM 7.0 Experts,
We are implementimg SRM 7.0 and we are trying to execute the Initial Load of materials into SRM 7 from ECC. We have completed all the Middleware settings and all the customising required for material replication. Whe we run the initial load (tcode R3AS) and select the first object DNL_CUST_BASIS3, it runs but the status remains "Running" in R3AM1. There is no errors in SMQ1as the entry runs and completes and therefore disappears. There is no errors recorded in SMW0 or SLG1 either. What could be the problem?
I checked in SMQ1 & SMQ2 as well, but there is no entries here for the object DNL_CUST_BASIS3. what we can do to resolve the issue ?
Regds,
Cb

Have you checked the outbound queue in backend R/3 system ?
Have you defined the additional user in CRMCONSUM table apart from the CRM user?
Verify and, if necessary, change or insert entries in tables CRMCONSUM and CRMRFCPAR as
described in SAP Note 430980. See also SAP Note 720819.
Hope this helps you.
Regards
Abhijeet

Material replication issue from R3 to CRM

Similar Messages

Maybe you are looking for