Merge workbench request and solman request

I have created a workbench request outside solman, now a solman request is created for that workbench object. how to merge the old request with solman request?
thanks

Hi sudeer,
you can do this by logging into Development system and open the solman TR through Se09 and right click - you will have many options wherin u can select Include Object / merge request and then provide the TR task number created outside solman. Now your solman TR will have the object assigned under it and can be moved to QA and Production through solman.
Hope it solves your problem.
Reward points for helpful solution.
Regards,
Imran

Similar Messages

  • Difference between customizing request and workbench request?

    Hi ,
    What is the difference between customizing request and workbench request?
    please reply.........

    HI,
    <b>Workbench Requests</b>
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    <b>Customizing requests</b>
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    pl reward if it helps.
    Thanks
    Sadhu Kishore

  • Customizing request and Workbench request

    Can some one clarify me the difference elaborately
    Thanks
    Krishna

    Hi Krishna
    Changes to cross-client Customizing objects and to Repository objects are recorded in Workbench requests
    In workbench request .... it can be programs(repository objects) and cross client data (ie not specific to one client).
    Changes to client-specific Customizing objects are recorded in Customizing requests.
    Customer customized data designed for a specific client is transported to another client using customizing request. Most of the cases these requests are something like changing values in tables (that too client specific).
    Hope it helps
    regards
    Srinivas

  • Difference between workbench request and customizing request in transport

    Hi Experts,
    I am new to SAP BI7 work. i am having basic doubt in Transort request creations
    ususally we create  the requests to transport the objects from Development  system to further systems.
    can anyone please clarify me,  what is the main defference between the Workbench request and Customizing request.
    Thanks and Regards
    Mrudula

    Hi ,
           The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
    1)WorkBench Request & 2) Customizing Request.
    Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
    Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
    Refer this links http://www.allinterview.com/showanswers/57910.html
    customising and workbench request
    Difference between Customizing request and Workbench request
    and many more threads available on this.
    Regards,
    Rahul.

  • Advantages and disadvantages of merging transport requests

    Can anyone tell me the various advantages and disadvantages of merging transport requests?
    Moderator message: potential interview question, always search for available information before asking.
    locked by: Thomas Zloch on Sep 14, 2010 12:44 PM

    Please search for available information on SCN.
    Regards
    Abhii

  • What is the workbench request and customizing request.

    can anybody explain what is workbench request and  what is customizing request.

    <b>Workbench Requests</b>
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    <b>Customizing requests</b>
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

  • How to merge several customizing requests into a workbench request?

    Dear experts:
      could you tell me How to merge several customizing requests into a workbench request in t-code:SE03?
    thanks
    Edited by: feng Qiu on Nov 4, 2008 3:24 AM

    Hi,
    Refer this:
    Re: Customizing Request's contents - Transfer them to a new request
    http://help.sap.com/saphelp_nw2004s/helpdata/EN/d4/34196a249711d3b29e0000e817ab98/content.htm
    I believe you need to do this from SE09/SE10.

  • Diff between cusztmizing and workbench request

    could u please let me know what is diff between workbench and custmizing req ?
    Regards

    Hello,
    customizing req vs workbench request
    Check this info.
    Workbench Requests
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    Customizing requests
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    Hope this resolves your query.
    Reward all the helpful answers.
    Regards,
    Jorge Diogo

  • Diff between customizing request and workbench request

    hai everybody...
    i want to know the  difference between customizing and workbench request.
    and tell me what is customizing request?
    and also what is workbench request?
    thanks ...
    velu.......

    Hi,
    Workbench Requests
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    Customizing requests
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    Hope this info helps.
    Regards,
    Kumar.

  • What is the difference between workbench request and customizing request

    hi gurus
    can anyone suggest me
    what is the difference between
    workbench request and
    customizing request
    abaper ll work on which request
    thank you
    regards
    kals.

    A quick  search in the forum would have taken you to this answer
    Workbench Requests
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    Customizing requests
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

  • Reg- Package and Workbench  request

    hi
    While creating Workbench request system is not asking Package, insted of that it is asking transport request. earlier we used to save in Packages. where i ahve to settings?
    regards
    raejdnra

    Hi Rajendra Prasad,
    It will ask for the package name only for the first name. If you are trying to change it, it will only ask for a transport request and not a package name.
    Regards
    Aneesh.

  • Customizing request & Workbench request

    Dear all,
                    What is the differance between Customizing Request & workbench request?

    Hi,
    Workbench Requests
    When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
    Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
    Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
    Workbench requests record changes made to ABAP Workbench objects.
    There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
    The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
    Customizing requests
    Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
    Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
    Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
    Changes to Customizing settings are recorded in Customizing requests.
    When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
    The client settings determine whether
    o changes to the Customizing settings are possible
    o the changes are recorded
    When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the R/3 System.
    Regards,
    Satish

  • Find workbench request for existing report

    Hi
    Someone created an Report for me in order to develop some new functionalities.i have to transport it now in the test system but i do not know how i can find the workbench request for it or how i can save it in another workbench request.
    thanks

    Hi Seba ,
    You can find the workbench request for the report by displaying the report and following this path in the menubar.
    Utilities > version > version management.
    If you want to add this request into another request goto SE01 and there you will find the icon for adding the objects for your request.
    Regards,
    Anuj

  • Workbench request released

    Hi,
    I accidentally released a workbench request for Asset Accounting in R/3.  I have tried numorously to delete the request even in R/3.  I now have an error when I try to change a query.  Is there any way that a request can be deleted/changed after it is released?
    Regards,
    Adri

    Hi Adri,
    I'm not sure how can we back the changes from the target system. (it depends on version management and high complex issues)
    And I sugget you to release a corrective request for the previous released request.
    To capture, follow the process as you did before.
    Create a new request in SE09.
    To this request, assign the package associated to your query in BEx transport in Transport Connection (RSA1)
    Hope this Helps! Assign pts if its useful!
    Regards
    GSK

  • Prompt for transportable Workbench request

    Hi experts,
    I want to create a web service, and let my asp.net program call it.
    I input se37 in ECD, and input zzz_yyyy_xxxx as function module, then click "create" button.
    In the next step, I need input "Function group", but I have not , so I need crate one.
    In the "Create Function Group" dialog, I input "Function group" and "short texst", and click "save" button.  It takes me to "Create Object Directory Entry", I  input "Package" ,then press "Save"button again.
    Now it takes me to "Prompt for transportable Workbench request" dialog. Now I need input "Request" and "short description".
    I'm confused.  What do I input as  "Request"?
    Thanks.

    I am guessing you are quite new to this? It is asking you to create a transport package which can be sent to quality or production systems later on. If you do not want to do this you can click local object and it stays in development server. Otherwise you click the page icon and then type a description of the work/program you are creating. Save it and it will generate a transport package for you.

Maybe you are looking for

  • HT4009 How do I get my money back if an app was incorrectly purchased multiple times and I was inaccurately billed??

    My daughter bought an app and it charged my account as though I purchased 20 times which should not even be possible. I need help to be reimbursed! thanks

  • Error: 130200 upon updating Acrobat 9.0 Pro

    Hi all, Acrobat 9.0 Pro keeps telling me that there is an update available. When trying to install the update there is an error message appearing: (translated from german): screenshot see below "Update Error An error has occured. Please try again to

  • Image attachments sent to me by another are being downsized

    I'm a freelance designer, and one of my clients sends me all work via e-mail. The last few days, when she sends me images (that she received from another client) they are downsized to a point where I can't even use them. Is there a setting somewhere

  • Using internet connect menu extra in script

    Inspired by this post I was wondering if there was a similiar possibility for the internet connect menu extra. Something like: tell application "System Events" to tell the front menu bar of process "SystemUIServer" set menu_extras to value of attribu

  • Cost center BLOCK

    If you wanted to block a cost center from future use, do you need to clear out the current year to date activity first or can you simply block the cost center and retain all information in that cost center YGB