Message headers generated by cfmail

I was using a CF8 script as an email client to send mail
through the smtp.comcast.net server. Everything was working fine
until Comcast switched email from port 25 to port 587, now my email
is not getting sent. All my settings in the CF Administrator appear
to be correct, i.e. I am able to verify connection to the Comcast
server. Email does get out through port 587 when sent by the MS
Outlook and MS Outlook Express clients. I would like to take a look
at the headers that are prepared by CF8. Is there anyway to see
them?

Hi,
You have write UDF for this.
Please see the below code .
java.util.Map map = container.getTransformationParameters();
String MesID = (String)map.get(StreamTransformationConstants.MESSAGE_ID);
return MesID;
Hope this helps to you.
Regards,
P.Rajesh

Similar Messages

Error messages while generating reports

I am using CR XI SP4 and i get the following message when generating reports:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt:
Unknown Database Connector Error---- Error code:-2147482942 Error code name:failed
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException (Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.t.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.w.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
In the RAS log file i see:
ErrorLog 2009 7 21 17:45:16.188 732 3648 (\servers\ras\dtsagent\cdtsagent.cpp:3113): CDTSagent::doOneRequest reqId=250: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:13209 ErrorCode:706 ErrorMsg:"Unknown Database Connector Error
Error in File D:\Temp\{67475350-F4E8-466A-B1E9-414965812A20}.rpt: Unknown Database Connector Error"
Any assistance would be appreciated
Thanks

hi,
You are able to login in to application, Means your authentication is working.
Open RPD in online mode and try to view data.
Check your connection pool setting in General tab.
Check you have selected appropriate Data Source Name, Call Interface.
Thanks,
Sainath Baludu.

How to get the message ID generated by the PI system during message mapping

Hi All,
I have a file to file scenario, where during the mapping, I want to map and send the Message ID generated by PI.
Can anyone please help me with this?
Kind regards,
Joe

Hi,
You have write UDF for this.
Please see the below code .
java.util.Map map = container.getTransformationParameters();
String MesID = (String)map.get(StreamTransformationConstants.MESSAGE_ID);
return MesID;
Hope this helps to you.
Regards,
P.Rajesh

Outbound Messages not generating on Published

I tried publishing a PO Confirmation and a Save + Send a Scheduling Agreement Confirmation from the Supplier view. However no outbound xml messages were generated.
I have been reading posts of activating the Badis but in another proejct that we recently implemented, we did not have to implement any Bad for RON or ROC.
Is there any other config or scheduling or queue setup required on the SNC side to trigger these messages?
Nothing shows up on sxmb_moni
K

Hi,
Activate validation check SCONF_PUBLISH_DIRECT for validation profile=SCN3.
Path:SPRO>Supply Network Collaboration>Basic setting --> Validation >Own settings>Maintain setting for validation profile
Enter validation profile=SCN3,validation check=SCONF_PUBLISH_DIRECT and save the settings.
Now try to publish schedule agreement confirmation.
Regards,
Nikhil

Error messages when generating

Hi, I am getting error messages when generating Webhelp that
I haven't gotten before. When i go into the output files after
getting these messages, I notice there are hardly any of the java
script files in there. The messages I get are
"Template Active Script Error: (null) [Line: 13] (null)
Template Error: can not resolve macro: RegisterResolvers
Fatal Error: Cannot run macro: RegisterResolvers in
compilation script.
Template Error: can not resolve macro: WH_HOME_HTM
Template Error: can not resolve macro: SF_HOMEPAGE_HTM
Template Error: can not resolve macro: WH_CSH_HTM
Template Error: can not resolve macro: WH_CSH2_HTM"
What do these mean and how can I fix them? Thanks,
Becky

Becky
This is usually caused by an incorrect install.
Peter Grainge explains this in detail.
Click
here to go to Peter's web site for the resolution.
Hope it helps,
Brian

How does one show full message headers in Mail 8.1? The previous 'complete header' option has been replaced with a time consuming 'custom' choice.

How does one show full message headers in Mail 8.1?
he previous 'complete header' option has been replaced with a time consuming 'custom' choice.

Customize your toolbar in Mail and add the All Headers button:

Displaying full message headers

I'm trying to debug a BlackBerry-specific email issue and I need to be able to display full message headers in a BlackBerry to be able to do. My searching around the net has only dug up two or three folks saying it's not possible. Is this true? If not, how do I do it? I've been through every option screen I can find.

starman7 wrote:
Any way to see in Convergence?Right click email to get context menu => Other... => "Display Full Headers".
Regards,
Shane.

Email Message Headers

Hi,
I'm trying to track bounced emails using a custom header when I send them.
When I try to retrieve the bounced messages using POP3 I am unable to access the header information, even though I can see it in the message properties in Outlook.
Does anyone know a way to retrieve all the message headers in an email, or how to access the message properties as seen in Outlook?
Thanks,
Kevin.

If the server is working the way it is supposed to (and if I remember my RFC's correctly) the original message, including the headers, are in the body of the bounced message. The bounce message is a completely new message that was constructed with parts of the originals headers but does not have all the information. You'll have to write some kind of regular expression to pull the content out.

Outlook 2010 RTM - Hide Message Headers

Good Day,
I pulled down Office 2010 RTM from TechNet last night, uninstalled the beta version, installed RTM. One thing that I'm noticing with Outlook is that, unlike the beta, I'm unable to hide message headers within the preview pane. If I go to the
view tab on the ribbon, then click View Settings | Other Settings ... then put a check in the "Hide header information" box, click OK | OK ... the change doesn't stick, headers are still visible. Anyone else experiencing this? Any known
workaround?
Regards.

Hi gabe,
I hope that when you say, “We are tracking that change to remove it for a later update...” you’re saying that what will
be removed is the lack of a hide header feature and not the removal of the hide header interface. It’s just a bad an ill conceive feature to remove in the first place.
After spending several days of trying to find a solution or workaround I deleted my Outlook 2010 and purchased OL2007 just for this feature.
Unfortunately OL2006 caused problems with Office 2010 so I returned for a refund and repurchased OL2010. This resulted in a week of trouble shooting, a waste of my time as well as the time of techsupport personnel at Dell and the retail store where I purchased
the Dell, and the Microsoft Office online store. The whole process also used up 600 of my cell phone rover minutes.
I’m not disclosing the above for sympathy but just to let Microsoft know what the consequences are to a bad idea to drop the hide header
feature. It should be optional as it always has.
Regards,
Panos333

Building hash based on IMAP message headers to maintain uniqueness

This is more of a general java question than Javamail but since it has relevance to IMAP, i thought of posting it here. Basically, I discovered it hard way that the IMAP server that I am working with (MS Exchange) isn't returning unique UID for the same message (for the same UIDVALIDITY on the folder). Under certain condition it simply purges the old message, creates a new message with a new UID (for example when read status on a message is changed, rather than changing the flag status, it purges the existing one and creates a new one with a new UID). I don't want to fight with Microsoft over this as all my previous attempts at pointing their errors have gone in vein.
Given this, I want to build a hash out of all the message headers and probably the internal date. This i know will guarantee uniquness in majority of the cases. The question is how do I do that. Is doing an MD5 on all the headers the best way to go about it? Will i run into a hash collision type situation with this?

Thanks bill. What's apparently happening in our exchange envrionment is that we have let's say a client A that deposits the message in Exchange store over MAPI. That client can create new message or change flags on existing, change priority and do all kinds of the stuff. When that client does whatever it does over MAPI, exchange somehow decides to flush the old message and create a new message even though the change was merely an update. I've confirmed with client A that they aren't doing anything unusual, its just that Exchange decides to do it their way. They actually are not violating the IMAP protocol either coz all they are doing is flushing the old message and creating a new one. My outlook client connected over IMAP handles this just fine in that as an end-user you don't see a delete followed by an add and hence i am assuming they must use something along the lines that I am planning on doing.
Totally agree that not using UID is going to be expensive but they haven't left me with any choice.

Message Mapping-Generating Headers and corresponding Line items in 1 file

Hi,
I am working on JDBC to File scenario.
There is a staging table in SQL Server. XI polls the table every 20 secs and picks up all the data with flag = 0. After fetching the records it sets the flag to 1 so that the same data do not get fetched the next time.
The record have one Bill No and there can be more than 1 line items associated with that bill no.
The target structure is as follows:
Record 1
 Bill No 0...unbounded
 Line item 1
 Line items 0...unbounded
Now the requirement is to generate a file with header and all the corresponding line items below it. That is one file can have many headers but all the line items should succeed its corresponding header.
I have written a UDF to generate the same.
For Bill No.:
Bill No -> RemoveContext -> Sort - > UDF -> SplitBy Value -> CollapseContext
UDF just removes the duplicate Bill No and generates the list.
Now the issue is if Bill No as per source is 8,4,1,3 then the ones getting generated in the target str is in the same order as it is in source that is 8,4,1,3. But I want this in the sorted order ie. 1,3,4,8. Althoug I have used Sort func, its not getting generated.
Please help.

chk this:
BillNo-removeContext--sort--splitByValue(valuechange)---collapse Context---Record
BillNo-removeContext--sort--splitByValue(valuechange)---collapse Context---splitbyvalue(each Value)---BillNo(Target)
BillNo-removeContext---------------------------
 -------------------------- SortByKey----------FormatByExample(2nd argument mapping below)---UDF2---Line Item
BillSerailNo(set its context to Row)--UDF1---removeContext--
BillNo-removeContext--sort--splitByValue(valuechange)----2nd argument mapping of "formatbyexample"
BillNo-removeContext---
 --------SortByKey----FormatByExample(2nd argument)---UDF2--splitbyvalue(each value)-Bill Serial No
BillSerailNo(set its context to Row)----UDF1---removeContext-----
BillNo-removeContext--sort--splitByValue(valuechange)----2nd argument mapping of "formatByExample"
udf1: Input will be var1
Execution type: all values of a context
String a="";
for(int i=0;i<var1.length;i++)
a = a + var1+ ";";
int b= a.length();
result.addValue(a.substring(0,b-1));
UDF2: input will be var1
Execution type: all values of a context
for(int b=0;b<var1.length;b++)
String [] a = var1.split(";");
for(int i=0;i<a.length;i++)
result.addValue(a);
Input:
<MT_Source>
 <ROW>
 <Bill_No>8</Bill_No>
 <LineItems>
 <BillSerailNo>second</BillSerailNo>
 <LineItems>
 <LineItems>
 <BillSerailNo>second1</BillSerailNo>
 </LineItems>
 </Row>
 <ROW>
 <Bill_No>5</Bill_No>
 <LineItems>
 <BillSerailNo>First</BillSerailNo>
 <LineItems>
 <LineItems>
 <BillSerailNo>First1</BillSerailNo>
 </LineItems>
 </Row>
<ROW>
<Bill_No>8</Bill_No>
 <LineItems>
 <BillSerailNo>Third</BillSerailNo>
 <LineItems>
 <LineItems>
 <BillSerailNo>Third1</BillSerailNo>
 </LineItems>
 </Row>
<MT_Source>
Target:
<MT_Target>
 <Record>
 <Bill_No>5</Bill_No>
 <LineItems>
 <BillSerailNo>First</BillSerailNo>
 <LineItems>
 <LineItems>
 <BillSerailNo>First1</BillSerailNo>
 </LineItems>
 </Record>
 <Record>
 <Bill_No>8</Bill_No>
 <LineItems>
 <BillSerailNo>second</BillSerailNo>
 <LineItems>
 <LineItems>
 <BillSerailNo>second1</BillSerailNo>
 </LineItems>
 <LineItems>
 <BillSerailNo>Third</BillSerailNo>
 <LineItems>
 <LineItems>
 <BillSerailNo>Third1</BillSerailNo>
 </LineItems>
 </Record>
 <MT_1>

Error message when generating PDF from PageMaker

Hello, Unfortunately my client is still using PageMaker, despite the fact that it is no longer supported. Usually, I have no problem, but this is the error I have had today:
%%[ Error: typecheck; OffendingCommand: get; ErrorInfo: CharOffsets fonts/TimesNewRomanPSMT%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
I'm on Vista, with Acrobat 8.1.3 and I'm printing to PDF from PageMaker 7. It seems to be a font problem, but I don't know how to solve it.
Any help would be much appreciated! Thanks!

Finally managed to get the first two of the 3 books (making up the full publication) printed by doing "Export". The third one, which has been causing all the trouble has started giving me the font message again:
%%[ Error: typecheck; OffendingCommand: get; ErrorInfo: CharOffsets fonts/TimesNewRomanPSMT%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
I had ensured that the PDF box said "warn and continue".
I also get a dialog box telling me that only even pages will be printed, although I have specified even/uneven in the print dialog, and that blank pages will not be printed, although I have checked the blank page box.
Have tried to "Print" to PS and I have managed to generate a PS file with only a message telling me that Helvetica Neue could not be incorporated, which is fine. However, if I then try to create a PDF, I get the message above. Does this mean that my problem is with Distiller rather than in the file?
I have never had this problem before, and am baffled.

XML Message Not Generated in SUS SRM 4.0

Hi !
In Supplier Self Service(SUS) SRM 4.0 we did a
development for ASN creation through file upload .
It's a BSP Application .
Vendor uploaded the file for ASN creation .
Their generated ASN No. which are in Standard tables.
But for Some of them No XML Messages Genrated which
suppose to pass backend SAP R/3 .
Anybody having any idea where exactly these XML
Messages are? We have searched through SXMB_MONI
& checked all qRFCs.
But unable to find their XML messages.
Looking forward your ideas.
Regards
Sachin S M

Message was edited by: Sachin S M

Hi,
Can you tell me if the next scenario is possible with EBP 5.0 (WAS 6.40) but without XI.
We need to develop an application to allow the supplier to upload an Invoice in XML and save it in EBP.
I was thinking on using a BSP application with an input field to browse local PC and pick up an Invoice XML file. Then post the XML and parse it in the BSP application and save the invoice in EBP.
Do you have any experience on it or some documentation?
We have EBP 5.0 but don't want to install an SAP XI.
Thank you

Output message not generated for Purchase order

We maintain MN04 message condition record for 2 key combination for output type NEU:
1. Purchasing Output determination : Document type -> NB, medium 1 print out
2. Purchasing Output determination : Document type/Pur Org/Vendor -> NB, 1000, vendor 20001, medium 5 External email
When I create PO for other vendor (not 20001), the system is nicely generating the output of the PO for printout.
Next we have maintain a condition record in MN04 for a particular vendor 20001, Doc type and Porg with setting 5, 4, EN so that we can send the PO via email to the vendor 20001, the system is not generating a message output of the purchase order when i check it before saving.
Please help me with this situation. we need setup the email PO functionality.

I created another message type ZNEU copy from NEU, include it in the message schema, created condition record with MN04/MN05 for both NEU for printout and ZNEU for medium 5 email. done all steps mentioned in the links.
When create a PO still only 1 message record NEU is defualted for printout only.
The message record for email ZNEU is not defaulted in PO?? Anything elase need to be done.

Deleted drafts - message headers remain with blank content (Gmail IMAP)

I thought I had solved the "zombie" drafts problem yesterday. I changed my Gmail.com IMAP settings to "auto-expunge off" and "immediately delete the message forever". My multiple zombie drafts finally disappeared from my Drafts box. But today, the multiple headers for all those deleted drafts have returned to my Drafts box, plus more for emails I sent since yesterday. There are 34 for one message. But the content panel for each of those headers is a completely blank, gray box. I do want to store my drafts on Gmail.com. Any help?

Hmm, turns out my iMac Apple Mail has been resetting the Mailbox activity settings for some random reason which would explain the drafts problem. Wonder why?

Message headers generated by cfmail

Similar Messages

Maybe you are looking for