Meta device question

How can I find out how much space I have left on a meta device? I am using solaris 9.

Hi.
You have mirror d10 with configureger only one submirror d11.
What reason configure mirror withot real mirror ? You only lose performance.
After somthing error LVM do not have access to device c3txxxxxxxxxxxx037F0000d0s0 and mark this device as neeaded maintance.
Becouse it was last work submirror in mirror configuration, this device mark as Last erred.
This flag used in dual submirror confgiguration for found device with latest information whan both submirrors failed.
What You can do at this state.
On your choice:
1. Ignore this problem. Becouse clear this error don't increase availability of this device.
2. Stop application. Umout device d10
   metaclear d10
   metaclear d11
Change /dev/md/dsk/d10 (/dev/md/rdsk/d10) on /dev/dsk/c3txxxxxxxxxxxx037F0000d0s0.
Remount used FS, start application.
After this you will use direct device instead middle mirror.
3. Recreate Mirror/Submirror.
   metaclear d10
   metaclear d11
   metainit d11 1 1 c3txxxxxxxxxxxx037F0000d0s0
   metainit d10 -m d11
Remount used FS, start application.
I write commands with default values of some parameters. Current miror specific parameters you can see:
   metastat -p d10
   metastat -p d11
Of course you need do it before metaclear.
Output of this commands you can use for recreate device.
For trubleshuting what happens with device and why d11 change status to "Needs maintenance" You need analyze files /var/adm/messages* and find all errors/ warning messages about disk device.
Regards.

Similar Messages

  • Solaris 10 upgrade with mirrored OS (meta-device) partition

    I will going to upgrade my host from Solaris 10 5/08 (U5) to Solaris 10 10/09 (U8). The installation media is a cdrom.
    On my host, I used Solaris Volume Manager (SVM) to mirror /, /var, and swap.
    My Question is:
    Before the upgrade, should I just need to break one side of mirrors which will be sufficient for the upgrade process, or should I convert them back to physical device?
    How should I proceed?
    Thanks.

    chewr wrote:
    Firstly, Thanks for your answer. I hope that it will work as you said.
    But I am thinking that the OS upgrade process will boot from the cdrom, and it will only look for physical device to do the upgrade. That's the reason I am concerning whether the OS, which booted from cdrom, will able to see the meta-device?Solaris 10 boot media should be able to see and recognize the metadevices. Previous versions could not.
    On the other hand, if I need to remove all meta-device for the upgrade, will data be safe and intact on the physical device when the OS booted from cdrom?Safe? If you do reconfigure the system to not use any SVM devices for the OS, then yes the data is still there. I'm not sure what you're asking, or how the data might be at risk.
    Darren

  • Removing file system from meta devices in solaris 10

    hi,
    I have created a file system on meta device in solaris 10 using below command
    newfs /dev/md/rdsk/d110
    now i want to remove file system to make the meta device free, required command to remove file system ?
    Regards
    Zeeshan

    Thanks for your response , actually i have performed the below steps to release the space from mount point /u05 which i want to make the space as raw device so that i can use it for ASM , so my question is that how can i unformat the file system so that it can be a raw device.
    umount /u05
    metaclear d110
    (Now i have the below two metadevices 500gb each which i want to use as raw device so that i can allocate it to ASM (Automatic Storage management). So how can we make it as raw device ??
    /dev/dsk/emcpower17a
    /dev/dsk/emcpower17a

  • Meta device open error

    I have configured mirror on root hard disk on intel machine solaris 2.9.
    Configured RAID5 (d50) on single disk on 03 partition(s0, s1 and s3).
    My RAID 5 hard disk is faulty. I want to clear the d50 configuration from system. I gave a command
    " metaclear -f d50 "
    It gave me error saying "meta device open error".
    How to clear the configuration?
    Thanks in advance.

    from another doc:
    unmount the filesystem
    metadetach mirror submirror
    metaclear -r mirror
    edit the vfstab to change mount

  • LMS 3.2 DFM-all devices QUESTIONED-SNMP Timeout

    I imported 26 devices to DFM. All devices became QUESTIONED, error is SNMP timeout. Here are the troubleshooting steps that I tried:
    1. rediscovered devices
    2. deleted and rediscovered devices
    3. increase snmp timeout settings
    4.re-entered snmp strings in device credentials
    But I still get the same result.I noticed that devices become questioned so fast.Any advise on this?

    Hi,
    What version of SNMP you are using on these 26 devices ?Try to do the following:
    - Go to Device Center
    - Select one device for test
    - click on "check device credentials", select SNMP according to the version you are using.
    - See the results.
    May be you get more technical and detailed information about the SNMP timeout error. I have already experienced some problems using SNMP v3. The problem was resolved when I configured the SNMP v2c instead of v3.
    Also, I suggest you to try do "SNMP walk" test in the Device Center. If you get some results reading, for example, the value of "sysObjectId", just verify the Credentials Settings in DCR. You can edit the Credentials trhough the Device Center -> Edit device credentials.
    Regards,
    Wando N. Rocha

  • Switching devices question

    Currently in the Philippines on verizon's unlimited global data plan. my droid 2 global's screen went berserk and i was not able/willing to trust the postal service here to do the insurance routine. went out and bought an unlocked samsung galaxy tab for a replacement. Slapped my verizon sim in it and everything works fine so far. My question is when it comes to the billing side of the house with verizon: will my unlimited global plan for my motorola smart phone cover my usuage on the galaxy tablet? Dont need a couple thousand dollar surprise on my bill at the end of the month. Checked the My Verizon page but it still says I'm using my moto droid. phone, text, data usage still showing at 0 as usual.

    Dear Sivvy,
    I understand the importance of preventing the potential of high international data usage charges on your account. If you had an unlimited global data plan, it would've been compatible only as an add-on smartphone feature on a line with an active voice and domestic data plan.
    In order for the billing system to properly recognize a device change, the electronic serial number would need to be changed on your account. Changing the SIM will not allow the system to properly recognize a device change. Additionally, a tablet would not be compatible on a voice line; therefore, a plan change would be required, which would not allow you to maintain the existing global data plan.
    I would not recommend that you continue to use the tablet on your line, as you are likely incurring international data charges because the existing plans are compatible with your previous phone only.
    Our Global Support Team can be reached directly at 908-559-4899.
    Sincerely,
      JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • For Patrick Sasso/Rohan -- Aggregate Device Question

    Patrick and Rohan,
    I noticed that the thread which Patrick started was "archived" and replies are not allowed. ( http://discussions.apple.com/thread.jspa?threadID=237354&tstart=0 )
    Wondering what that's all about... But anyway, here's my question:
    I'm also running a PCI-424 and some MOTU interfaces also (old 2408 and some 1224's), but I'm not using the aggregate devices settings. So I'm wondering if I'm not aware of some useful aspect of the whole aggregate device thing... What are you using the aggregate device setup for? Is there an advantage to using it with a straight-forward audio recording/playback situation using the existing capabilities of the PCI-424 + interfaces?

    AFAIK this has always been possible (in panther....)
    as the 424 is configured, but appears as 1 device to
    the OS. Make sense or did I misread?
    I think you could do it off the MOTU PCI without
    aggregation, right? I am not a big MOTU guy but...
    Well, let's put it this way: when I got my G5 one of the first things I did was pop in the 424 card, hook up the interfaces, run the MOTU config thingee and it recognized all 3 interfaces without a hitch. Great!
    Then I installed Logic and without glitches it saw all of the MOTU ins and outs. Great!
    In my 40 output setup, Logic simply numbers the outputs consecutively, in the order that the interfaces are plugged into the 424 card. Within Logic there is no designation of outputs belonging to any particular device, i.e., none of the audio output labels are designated "MOTU 2408" or "MOTU 1224 #1" or "MOTU 1224 #2". They're just outputs 1 - 40. So in a sense, the way Logic "expresses" the MOTU outputs, it's as though they're "aggregated" -- a single device.
    It was only many weeks after I got my system up and running that I decided to explore the menus in the Audio MIDI Setup, and ran across this strange thing called "aggregate devices". There was zero, zero, zero documentation about it in the G5 manual nor in on-board Help, and a search of Apple's website turned up virtually no information. So basically, all this time I've been running with my MOTU interfaces, never configured anything having to do with aggregate devices, and I've yet to experience any kind of audio glitch with Logic. Great!
    So in conclusion, I'd say that if an audio system consists exclusively of MOTU devices, setting up aggregate devices isn't necessary. Same situation with the MIDI side of AMS, really... with Logic you don't need to configure AMS MIDI to do anything. In fact, as you may have read in some of my prior posts, setting up MIDI in AMS actually creates more work than it's worth.
    Therefore, my AMS is devoid of any user settings, except for the (seemingly) mandatory AMS-audio settings for "internal clock".

  • Meter / slider questions - cluster names, changing needle colour

    OK, so a couple of questions about meters /sliders.
    I have a meter indicator on a form, with two needles. (example attached)
    I want to create the cluster for the input using "bundle by name", but the meter "cluster" does not appear to have any names. I want the elements of the cluster to be "Channel 1" and "Channel 2" - how do I do this?
    Secondly, I want to be able to set the needles to transparent.
    I can do this with a meter with only one needle, but for more than one, I think you need to set the Active slider ("Actslider") property.
    It strikes me that the easiest way to do this is to use a loop, but how do I discover how many needles the meter has? Or could I use the cluster names to s
    pecify which needle I want to change colour?
    TIA
    Joolz
    [I'm going to add the word "color" here so that those of you across the pond will also be able to find this from the search engine ;-) ]
    Attachments:
    Slider_Cluster_Question_for_Labview_Forum.vi ‏14 KB

    Thank you both for the responses, and apologies for the tardy reply - changing priorities, etc, etc, you know how it is...
    I've attached a Vi to act as an example for anyone else who has either of these problems.
    The main thing I found out is that although you can, as you say, use a constant to "declare" the cluster names for the gauge, these names are only "remembered" by the wire - if you create a local variable of the gauge, it will NOT remember the cluster names. That's what had me confused...
    Cheers
    Joolz
    Attachments:
    Transparent_needles_and_Cluster_Names_for_Gauges.vi ‏84 KB

  • Authorized device question.

    I haven't used itunes for very long and don't completely understand the authorized device issue.  I understand what it's about and don't have a problem with that.  It's I have all my music and books purchased on my main computer, all the apps were purchased and downloaded from my iPad.  I keep both an iPad and my old iPod synced to the main computer.  Now the question.  When I need to download a large file (specifically the iOS 5 update) I have to do it from home because I have to use a satelite internet connection with a 500mb daily limit.  I can't plug my iPad/iPod into the notebook without it wanting to sync it and erase all the files on the device.  I also question what will happen when I have to replace my office computer. 
    Is there a document somewhere that explains how all this works.
    thanks in advance,
    bill

    That's certainly a possibility, but I have no idea how Bluefire handles
    digital rights management, so I can't comment.
    =================

  • Mass Storage device question

    I have an old blackberry 8320 and I am trying to retrieve the pictures memos, and contacts off the phones hard drive,
    I have installed the black berry desktop manager and it is able to to detect the phone but every time I got into media manager  I get and error message  "A Problem occurred awhile trying to connect to your device". I assumed the easiest course of action would be to use the phone as a mass media storage device to no avail,with
    "please insert disk"
    I am unclear if these methods are only to transfer the files from the  SD card in the phone. All the files are saved on the phones hard drive and I was unable to insert an SD card into the phone as I believe the SD slot may be damaged
    Does MAss Media storage mode acess the phone's hard drive or the sd card in the phone and if it does how do i retive the pictures and memos and files off the phone. 

    Hi
    Did you download the right drivers for the right notebook series???
    The Satellite P100-10P belongs to the PSPAGE series.
    I think you should check the Toshiba forum page again and be 100% sure that you have downloaded and installed all available drivers!!!
    I think you should check if you have installed also the Texas Instruments Flash Media driver.
    Last but not least the installation instruction was placed on the page.
    Please follow the guide lines and install the drivers in the right installation order!
    regards

  • Meta tag question(s)

    I am curious about a meta tag I came across:
    <meta name="description" content=" ">
    <meta name="keywords" content=" ">
    <meta name="revisit-after" content="31 days">
    <meta name="robots" content="all">
    <meta name="url" content="
    http://www.cariholdorf4homes.com">
    <meta name="MSSmartTagsPreventParsing" content="true">
    Is this necessary and/or beneficial to a website?
    How does this work?
    Will this work on all websites?
    How soon does an search engine identify new meta tags if a
    website is active?
    If I create a somewhat unique meta tag (keyword or
    description) for e.g. 'Revere's Electric Gates', will this get
    placed near the top of search engines?
    How can I increase the odds of getting near the top of a
    search?

    > <meta name="description" content=" ">
    Use the description meta tag for marketing purposes. It's
    usually (not
    always, but very often) the snippet that is shown below the
    page title in
    search results. It doesn't affect WHERE in the SERPS your
    site appears, but
    it can affect whether a person is motivated to click through
    to your site.
    > <meta name="keywords" content=" ">
    Pretty worthless. Don't bother.
    > <meta name="revisit-after" content="31 days">
    Worthless.
    > <meta name="robots" content="all">
    "Robots all" is the default behavior. No need for this one.
    You only need to
    use the robots tag to specify non-default behavior, e.g., no
    index or no
    follow.
    > <meta name="url" content="
    http://www.cariholdorf4homes.com">
    Non standard, not in any specs anywhere, therefore worthless.
    > <meta name="MSSmartTagsPreventParsing"
    content="true">
    This was worth using in the past when MS was trying to use
    its proprietary
    SmartTags technology to hijack visitors. I don't know that
    there's any need
    for it currently, although I long ago put it it in my own
    default template,
    so it's probably in every site I create.
    One more to consider:
    <meta http-equiv="imagetoolbar" content="no">
    I use this one to keep Windows from popping up that annoying
    and distracting
    image toolbar whenever the mouse is hovering over an image on
    the page.
    Sonjay
    On 11/8/07 2:05 PM, "JaneGarner" wrote:
    > I am curious about a meta tag I came across:
    >
    > <meta name="description" content=" ">
    > <meta name="keywords" content=" ">
    > <meta name="revisit-after" content="31 days">
    > <meta name="robots" content="all">
    > <meta name="url" content="
    http://www.cariholdorf4homes.com">
    > <meta name="MSSmartTagsPreventParsing"
    content="true">
    >
    > Is this necessary and/or beneficial to a website?
    >
    > How does this work?
    >
    > Will this work on all websites?
    >
    > How soon does an search engine identify new meta tags if
    a website is active?
    >
    > If I create a somewhat unique meta tag (keyword or
    description) for e.g.
    > 'Revere's Electric Gates', will this get placed near the
    top of search
    > engines?
    >
    > How can I increase the odds of getting near the top of a
    search?
    >

  • Lms 4.2 adding devices questions

    Hi All,
    I´m new in Prime LMS  and trying to add some my network devices on cisco lms 4.2 and  getting stuck on this stage.
    First I tried to use the "Discovery" way and got  follow messages
    Total Devices Discovered: 16 
    Reachable Devices: 1 
    Unreachable Devices: 15 
    Devices Newly Added to DCR: 0 
    Devices Updated to DCR: 1
    Went on "Unreachable Devices" got a list of devices saying stauts : Unreachable
    any idea what could be the problem ?
    AB

    I found the problem was an snmp configuration missmatch on unreachable devices :/

  • Non iCloud emails on 3 devices question

    I'm using BTYahoo and have this setup in the laptop, iphone and ipad.  It's not using iCloud  - I'm having problems and I dont know if there is a solution - I read the email on the iPad, for example, but it doesnt update the server/laptop.  Sometimes i view  the Inbox, and then all messgaes disappear before I get a change to read then, but are always available on the laptop to read.
    Do I need to forward all eamils to a iCloud account as a solution?  This account is for mailings, advertisements and other non-important stuff, this is why I still use and dont want to receive it on the iCloud account.  It's very inefficient and I still end up having to read/delete etc the emails on the laptop

    It sounds like you are using a POP/POP3 email account.  When you do this, the email is deleted from the server by default when it is retrieved on one of your devices.  Most POP accounts allow you to set this to never delete from the server so email will remain on the server to be retrieved by your other devices.  Go to Settings>Mail,Contacts,Calendars>tap your email account, tap Advanced under Outgoing Mail Server, then tap "Delete from server" and set this to Never.
    A better solution is to move to an IMAP account, which will make your email available on all your devices,allow you to use folders, mark you messages as read when you read them on any of your devices, etc.  If you don't want to use iCloud, you could try Gmail or Yahoo.

  • ITunes Match with an iOS device question

    I just finished setting up iTunes Match on my iMac. I have an iPhone (16GB) that I keep a few hundred songs on. What happens if/when I enable iTunes Match on the phone? Do I lose what is currently on the phone? Does iTunes start downloading all 3000 songs I have in iCloud (which will not fit)? Or does everything stay the way it is, but I have the option of downloading any/all songs from iCloud to my iPhone?

    After thinking this over. Let me reword my post.
    When you turn on iTunes Match on your iPhone, what happens? The bottom line for me is I have much more music in iTunes than I can fit on my iPhone. I keep a few hundred songs on my phone and thats the way I want to keep it. If I turn on iTunes Match on my iPhone I get a warning "iTunes Match will replace the music library on this device" It doesn't say what it will replace it with. Will it try to add all 3,000 songs from iTunes? Will it just replace the songs currently on my iPhone with the iTunes Match versions?

  • HT5694 When a Ipad is registered the "Valid Puchase Date" is checked. It says this enables Apple to locate and update your device.Question, when Ipad is stolen Apple should be able to locate the Ipad??? How many Iproduct owners would pay for this service?

    Valid Purchase Date claims to find and upgrade your device. Why when stolen cant they find it????

    All the thief has to do is turn off your location services and the you can not track it, even with the new update you can lock your iCloud but you still can't lock the location services. Thief throws the useless apple device away because you erase and lock your device, and you are out $300 - $3000 cause you still can't track your device!

Maybe you are looking for