Meter Levels and Bouncedowns
I've noticed that the levels you are seeing on the master fader prior to bouncing down don't always seem to translate to the exported mix.
In other words, I'll get my levels fairly up there (between -1db and -3db for a little headroom), but when I open the bounced file, it is not near these levels.
All the faders are where I want them - Master is set at 0.
Is there something I am missing or has anyone else noticed this with bounced tracks?
Levels should be the same. Do you perhaps have "normalize" selected in your bounce dialog? If one sample goes over zero, the level of the entire mix is dropped accordingly.
Similar Messages
-
Meter Levels stuck and won't record!!!!!!
OMG! This just aggrivated the world outta me...
Im running Adobe Audition CS6 through my Macbook Pro 2009 Core2Duo Intel system, with a Digidesign MBOX 2 mini.. everythings hooked up correctly, and i have all the necessary drivers selected within the program as far as input/output.. but when i press the [R] to record, before i can press "record" in the transport, the meter levels shoot up and once i start recording.. nothing is recorded!!! everything was just working fine 15 minutes prior to me going through these shananigans! Someone please help me through this craziness!Sounds as though the driver for the Mbox has failed. Try restarting the machine and see if that fixes it - and also check to see if Dodgydesign have an updated driver - you never know...
-
How to update the service order status at meter level
Hi
I need to fetch one open service order and update the retrieved open service order status at meter level.
I am trying to do it through BAPI_ALM_ORDER_MAITAIN but i am not able to do it.
Please let me know the process how to update.
Thanks & Regards
PallaviHi,
Check if this code works ...
REPORT zbapi .
DATA t_meth TYPE TABLE OF bapi_alm_order_method.
**Internal table for Operation (BAPI)
DATA t_oper TYPE TABLE OF bapi_alm_order_operation.
DATA t_comp TYPE TABLE OF bapi_alm_order_component.
**Internal Table for Opertaions UP (BAPI)
DATA t_comp_up TYPE TABLE OF bapi_alm_order_component_up.
**Internal table for BAPI Return code
DATA t_ret TYPE TABLE OF bapiret2.
***WORK AREA DECLARATIONS
**Work Area for Hedaer
DATA:wa_header TYPE caufvdb,
wa_meth TYPE bapi_alm_order_method,
wa_op TYPE afvgb,
wa_comp TYPE resbb,
wa_comp1 TYPE bapi_alm_order_component,
wa_comp_up TYPE bapi_alm_order_component_up,
wa_oper TYPE bapi_alm_order_operation.
PARAMETERS:TEST.
****Fill Method Internal table
CLEAR wa_meth.
wa_meth-method = 'SAVE'.
APPEND wa_meth TO t_meth.
wa_meth-refnumber = sy-tabix.
wa_meth-objecttype = 'COMPONENT'.
wa_meth-method = 'CHANGE'.
wa_meth-objectkey(12) = '000004000104'.
wa_meth-objectkey+12(4) = '0010'.
wa_meth-objectkey+16(4) = '0010'.
APPEND wa_meth TO t_meth.
**Component Internal table
wa_comp1-reserv_no = '0000001072'.
wa_comp1-res_item = '0001'.
wa_comp1-activity = '0010'.
wa_comp1-item_number = '0010'.
wa_comp1-special_stock = 'B'.
wa_comp1-requirement_quantity = '15'.
wa_comp1-stge_loc = '0001'.
wa_comp1-backflush = 'X'.
APPEND wa_comp1 TO t_comp.
**Component Update Internal table
wa_comp_up-special_stock = 'X'.
wa_comp_up-backflush = 'X'.
wa_comp_up-requirement_quantity = 'X'.
wa_comp_up-stge_loc = 'X'.
APPEND wa_comp_up TO t_comp_up.
**Call Bapi
BREAK-POINT.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
it_methods = t_meth
it_component = t_comp
it_component_up = t_comp_up
return = t_ret.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'. <--- Hope u r using this too
regards,
Naveen
Edited by: Naveen Deva on Apr 16, 2009 9:12 AM -
MCHB,MARD - Stock available at plant level and storage location level
Hi ,
How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
In MCHB-Stock at lot level is shown.
In MARD-Stock at Storage Location level is shown lncluding
the stock maintaned at the lot level.
If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
Do I need to subtract the MCHB Value from MARD Value ?
Is there any other way available to find the stocks which is not maintained at lot level.
Regards
PrasathHi prashant,
What do u mean by stock maintained at SL level without batch level. Do u mean that some materials are subjected to batch management and some or not?
If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level. But still what ever u are getting from MARD table isstock at SL level only.
If u have activated batch management for any material, it will always be shown at lot level also.
hope this clarfifies query
award points if found useful -
How to improve the query performance in to report level and designer level
How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr -
Dunning Old dinning level and dunning level
Hi experts,
I have one issue in dunning. the issue is where the dunning history for particular customer shows as old dunning level as 3 and dunning level as 2.
i have checked the customer master there is change in the dunning procdure. But the document and master data shows the correct dunning level with the new procdure.
so i didnt understand what is the OLD dunning level and dunning level for the same cusomer. the issue is only with one customer.
I have also checked with old procdure with same customer in table MHNK. there are some notices done. but how come the current invoice shows the old dunning level for the same invoice.
can any once explain me how to proceed.
Regards
AshokHi
Thnks for the reply so we need to apply this note for making the old dunning level and dunning level makes equal after you run the program.
Also one more doubt, since i have observed that the dunning after the parameters entered. looks like this
Parameters were maintained
Dunning selection executed, job deleted
Dunning notice printed, job deleted.
the above doesnt means that they will update the old dunning level right.
Regards
Ashok -
Table relationship between hierarchy level and merchandise category
1) Want to find Merchadise Category from Merchandise Hierarchy level which is attached with same Merchandise category.
I am having data/TABLE as below.
my input: M_WWG1C_class
i want to fetch data matkl in T023 or matkl in MARA for the same article within same merchandise category.
How i can have link?
2) i am having input CAWN_atwrt(Characteristic Value) and how i can reach matkl in T023 or matkl in MARA for the same article within same merchandise category.Oracle does not support REPEATABLE READ transaction isolation level. It only supports SERIALIZABLE, READ COMMITED and READ ONLY isolation levels.
The default is READ COMMITED.
While the READ COMMITED can access all the committed data till the point of execution in transaction, READ SERIALIZABLE can access committed data till the point of start of transaction.
Another difference between two with respect to ROW LEVEL LOCKING is
Both read committed and serializable transactions use row-level locking, and both will wait if they try to change a row updated by an uncommitted concurrent transaction. The second transaction that tries to update a given row waits for the other transaction to commit or roll back and release its lock. If that other transaction rolls back, the waiting transaction, regardless of its isolation mode, can proceed to change the previously locked row as if the other transaction had not existed.
However, if the other blocking transaction commits and releases its locks, a read committed transaction proceeds with its intended update. A serializable transaction, however, fails with the error "Cannot serialize access", because the other transaction has committed a change that was made since the serializable transaction began.
Read following for clearing your concepts on transaction isolation levels and locking mechanisms
http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96524/c21cnsis.htm#2414
Chandar -
Revision: 3120
Author: [email protected]
Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
Log Message:
When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/webapps/webtier/build.xml
Added Paths:
flex/sdk/trunk/templates/client-side-detection/
flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection/index.template.html
flex/sdk/trunk/templates/client-side-detection-with-history/
flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
flex/sdk/trunk/templates/express-installation/
flex/sdk/trunk/templates/express-installation/AC_OETags.js
flex/sdk/trunk/templates/express-installation/index.template.html
flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
flex/sdk/trunk/templates/express-installation-with-history/
flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
flex/sdk/trunk/templates/express-installation-with-history/history/
flex/sdk/trunk/templates/express-installation-with-history/history/history.css
flex/sdk/trunk/templates/express-installation-with-history/history/history.js
flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
flex/sdk/trunk/templates/express-installation-with-history/index.template.html
flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
flex/sdk/trunk/templates/metadata/
flex/sdk/trunk/templates/metadata/AC_OETags.js
flex/sdk/trunk/templates/metadata/readme.txt
flex/sdk/trunk/templates/no-player-detection/
flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection/index.template.html
flex/sdk/trunk/templates/no-player-detection-with-history/
flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
Removed Paths:
flex/sdk/trunk/templates/html-templates/Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
How can I check if there are meta tags and description tags for my pages on website?
I want to check if the pages on my website have keywords or meta tags and description. How can I do that?
In Contribute, Edit the Page and the click on Format, Keywords and Descriptions.
-
Config for Cost & budgeting at activity level and WBS element level in PS
Dear GURU's,
please suggest me how to do the spro configuration for budgeting and costing, here my requirement is I need to do cost planning and budgeting at WBS element level and Activity level. We two deferent types of projects.
Regards,
BhaHi Bhanu,
Cost planning in projects can be done through two techinques:
I. Manual cost planning (at WBS level)
1. Overall planning (Struture-oreiented planning)
2. Detailed planning (Cost element planning)
3. Unit costing
4. Easy cost planning form
II. Automatic cost planning using networks and assigned orders
For customizing: Use transaction OPUV and enter the required entries for cost planning.
Budget can do only at WBS level. For configuration do the following steps:
1. Create Budget profile - OPS9
2. Assign Budget profile in Project profile - OPSA
3. Then allot budget to your project - CJ30
hope it will be very clear. Appreciate with point if it useful.
Thanks and Regards
vetrivelan -
How to do budgeting at activity level and WBS element level in project syst
Dear GURU's,
Can any one please suggest me how to do budgeting at activity level and WBS element level in project systems, friends please I required set by step process.
I need how to do this configuration to map this scenario.
Regards,
BhanuHi Bhanu,
Use this link :
http://help.sap.com/saphelp_45b/helpdata/en/86/98853478616434e10000009b38f83b/frameset.htm
after page opens , click on BUDGET MANAGEMENT , There you will find each and every step you want .
Thanks ,
Dhruv Kumar Malhotra -
Delivery address at Item Level and not at the Header Level
Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKSIt is standard process only.
In Po delivery address is maintained at item level because to which address perticular material to be delivered,
this may change from material to material or may not change -
I no longer have sound when playing my clips through adobe premiere elements 12. How to I correct this problem? I have checked all audio levels and there is no mute on etc. I updated to 12.1, but still no sound in any clips. Even not on old files which used to work.
bfun
What computer operating system is your Premiere Elements 12/12.1 running on? Can we assume that this audio plays back OK
on the same computer when you are using a computer player independent of Premiere Elements?
What are the properties of these clips that worked before but do not know with regard to sound
For now, I will assume that you are working on Windows 7, 8, or 8.1 64 bit.
Have you checked the Edit Menu/Preferences/Audio Hardware ASIO settings? Do you have any 3rd party audio devices incorporated in your computer environment?
Please delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. The Windows 7, 8, or 8.1 64 bit path is
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and, in the 12.0 Folder, is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Make sure that you are working with Folder Option "Show Hidden Files, Folders, and Drives" active so that you can see the complete path cited.
Do you have installation files or installation disc with the purchased serial number in case we need to resort to uninstall/reinstall?
We will be watching for your follow up.
ATR -
Deletion of the Purchase order at the item level and header level
Hi Gurus,
We are using SRM 7.0 system.
In standard SRM 7.0, the PO can be deleted at header level and at line item level. I need to know the differnce between these deletions. I found that if the PO is deleted at the line item level the deletion indicator (DEL_IND) field in BBP_PDIGP table is 'X'.
But i could not find any clue to find the PO which is deleted at the header level. I need to code this logic in a report .
Kindly provide your valuable inputs.
Thanks,
RKThere are two ways:
1. From the Header by clicking the DELETE button. And this is only possible when the PO is not yet output to Vendor.
2. The second way is to delete all the items in the PO. This is possible any time irrespective of the output sent to the vendor. But provided if there are no follow-on documents for this.
Some times we could see the Deletion icon active in Header , it is because there is change version existing.
When a PO is created and ordered, this is the first version of the PO. And this PO is sent to the backend and output is sent to
the vendor.
Now when you make a change and hold it, SRM creates the 2ndversion of this PO. Then when you delete this PO, SRM marks this 2nd
version of PO to closed. Also you receive the pop-op confirmation that PO was deleted at this point. However, this PO deletion is never sent to the backend and output is not sent to the vendor since this PO has never been ordered. This version is the Change Version. This is shown after the PO number field if you pay attention on the screen.
When you search for the PO, it will show you the ordered PO (No change version shown after the PO number). The system does not show you the deleted version which is version 2. That is why you see status is 'ordered'. -
How to add three fields in Sales order item level and supress/hide many
Hi Gurus,
My client requirement is :
1. Three fields to be added at Sales order Item level and they should flow till billing.
2. Supress/hide most of the fields in Sales order, so that end user will be happy( thru SHDO how to do)
Please share your experiences and help me.
BEST REGARDS
SrikanthHi Subba Rao
in VA01 screen - Material /qty/ after entering this client wants to enter three more details say X/Y/Z
and after that he dont want to see maximum fields displayed in VA01 Screen.
I think it makes sense.
Regards
Srikanth
Maybe you are looking for
-
Connecting to closed paths and having neat corners?
Problem: I would like to create complex shapes with more than 2 lines intersecting some corners or sides but still retain "proper" edges. [When attempted with line segments] Is there any way to join these creating correct corners? That would be perfe
-
OWA email shows "script alert undefined" message
I have an internet enabled Nokia E71. when I try accessing my (web based) microsoft outlook web app mail through the web on the phone, ie. by typing web address as 'https://owa.*****.org/owa' then on entering the username and password mail account op
-
GR IR clearance for previous periods
HI, Our client is trying to clear GR IR Account via F.13. The OB74 settings was configured as WAERS (Currency )as Criteria 1 and PRCTR (Profit Center) as Criteria 2 for the Account Type u201CSu201D. Because of this setting the GR IR account got wrong
-
The same file with the same name need to call two RFC's with the sequence
i have to pick up the same file with the same name and call the two RFC in sequence scenario.i have xxx.txt file.file should be proces first calling the first rfc . I created two different communication channels for the first sender file communicati
-
How to save 4 artboards as 1 JPG image in Adobe Illustrator?
I am doing an online class for fundamentals of design. I had to create 4 different designs, so I did this by doing them on 4 different artboards. I need to save my work for "web and devices..." as a JPG image in Adobe Illustrator (this i can do). But