Mic Latency and Volume

I have a Behringer 1204FX that I plug my AT 2020 mic into. I have tried everything but I still have some latency while in GB- I believe that I always will with this configuration. What if I monitored by voice while doing a podcast from the monitor jack on the mixer instead of the monitor on the mac - would I eliminate the latency? and at the same time would I be able to hear myself real time and would the end product be the same
Also, it would appear that I have to pump up the gain on the mixer and GB to register a normal volume in GB - is there a way to get around this.
One last question - would I have been better off just buying a small recording device instead of the mixer and then sending tracks to GB?

[email protected] wrote:
What if I monitored by voice while doing a podcast from the monitor jack on the mixer instead of the monitor on the mac - would I eliminate the latency?
yes
and at the same time would I be able to hear myself real time and would the end product be the same
yes (minus any effects you may add)
Also, it would appear that I have to pump up the gain on the mixer and GB to register a normal volume in GB - is there a way to get around this.
as long as it works, i'm not sure what the issue is
One last question - would I have been better off just buying a small recording device instead of the mixer and then sending tracks to GB?
you haven't explained what you're doing, so "maybe"

Similar Messages

My earphones mic and volume buttons don't work ever since the iOS 8.1 update! Please help me. One discussion person says they bought a new pair and THEY don't work either. What do I do? I'm about to have a breakdown!

I rely heavily on my earphones because well... I'm lazy but they don't work. They work on my friend's iPhone who hasn't updated yet but I've updayed and the mic and volume buttons don't work. Please make a correct update!

Nope, still same problem. I did an install, didn't work. Then I completely removed my IDT driver, restarted, installed the driver, restarted, same problem.
When I troubleshoot my audio it always asks me which one to troubleshoot. It only works if I do one of the "Speakers / HP - IDT" but I don't know why it has so many devices listed with the same name.
Also, after I troubleshoot and I can hear audio, if I go to "Manage audio devices" it still shows that no audio device is installed, which is why the webinars won't work.

Lumia 920 Sennheiser CX 680i mic and volume proble...

Hi all
I just got a pair of Sennheiser CX 680i. They are iPhone compatible but I didn't know that they only partially work with my Lumia 920.
The play/pause, skip forward and backward are working fine. But the mic and volume don't. I read that it's because apple products don't uses the AHJ standard.
I would really like to be able to use the mic and vol control. Is it possible to buy some kind og adapter? Or are there any other solutions to the problem?
Hope you have the answers out there...

Refer THIS

Oracle and volume- and disk array-based replication?

Dear mighty all,
here is a situation:
Location A - active Oracle database + volume replication software + geocluster software
Location B - standby location, i.e. standby database + volume replication software + geocluster
Oracle is 10g
The size of the database is 500 GB+
The daily updates are roughly 2-3%.
The comm channel between locations can have any reasonable bandwidth, however the jitter and latency cannot be guaranteed (i.e. no synchronous replication).
This is a matter of protecting against a disaster (such as a complete destruction of Location A).
The task is to make sure that Location B has the up-to-date data (RPO is 8 hours) and Oracle database can be started automatcially without any manual intervention. (I.e. cluster administrator pushes the button and the rest is done without human intervention).
Here is what I am thinking of:
1) volume replication software usually observes the atomicity on the disk block level. I.e. it is impossible that the data block being updated on the volume in Location A is updated in location B incompletely.
2) When the database in Location A completes a transaction it writes data to the disk thus initiating the series of disk block updates being sent to Location B.
3) From the database point of view, the transaction is completed, database files are updated.
4) However there is a slim chance of Location A being destroyed while:
* the volume replication software has started pushing through to Location B the updated disk blocks representing the completed transaction
* but it did not finish transmitting the whole lot of disk updates (boom! the asteroid fell on Location A)
* and volume replicator in Location B cannot roll back the disk updates since volume replicator does not know of the database transaction
5) Volume replicator atomicity is disk data block while Oracle's atomictity is transaction (i.e. there cannot be a half-transaction applied)
6) Thus, when we start Oracle in Location B, we will get inconsistent database, since the last transaction was transferred to Location B incompletely
7) Sure that there is a way to fix this using various DBA tools, but that defies the whole purpose of automatic start
So, my question is:
1) Is volume- or disk array-based replication not a good idea in this case at all?
2) or is there a way to nonetheless ensure the consistency of the database (say start it every time in the recovery mode)?
3) Or should I dump the idea of replicating Oracle with volume replication and switch to DataGuard? (The cluster software can handle DataGuard).
thanks a million for your answers, ye mighty all!

Hi,
this is not a "typical" question what is easy to discuss in a forum.
Just some hints:
1. using volume replication won't help you against logical or physical corruption
2. RPO of 8 hours ? Sounds a lot regarding a change rate of 10-15 GB a day.
3. 100% Automation is normally not a good idea in a database disaster scenario
( a false disaster detection can end in a real disaster!) I've already seen too much databases which had been totally corrupted by a false switch.

Fix for Encore 2 microphone's warp sound and volume issue

I had just recently purchased an Encore 2 and found out everything works crisp and great except the microphone sound quality when recording a video. How I could solve this hard to fix problem.
I came up with solution and works great. Total notice imporvement and found out driver adjustment problem like I speculated due to PC pcb solid state build in terms of on board hardware usually-not sure but probable.
1. Make sure to utilize Toshiba Service Station and updated the new bios, intel installer, Realtek audio, wireless, and mirroring.
2, After the Realtek audio install you should get a icon on start programs list or on your desktop.
3. There click and up comes Realtek Audio Manager.. There go to advance and bring up Windows sound manager I think on a button below rest.
4. Here got to l think last tab and click on radio Do nothing instead of like 80% noise supression and click ok.
5. On the Realtek Audio Manager adjust microphone volume from 17 to 90 and boost to 0.
6. Next on the Manager click on voice button and set it to disable all.
7. This should give you a well adjust computer mic on regular PC level video and sound recording. It's pretty good. Adjust mic volume for background noise just like a desktop.
Mainly I speculate since Encore 2 is full Windows 8.1 tablet that it share approximately same requirements as laptop pc in function and has a PC mic processor rounting and connections instead of like a smartphones systems. You have to treat the mic as a laptop PC mic funtions and tune accordingly. Videos are now perfect seems like unless something comes up.
Need help ask for completion.

i found a? way to reduce to a large extend the noise if i touch the computer case.
but still there's echoing in ts and steam.

Xperia Z1 mic issue (low volume) when using WeChat

Was searching this forum for a solution, but to no avail. Using Wechat on Xperia Z1 with Android 5 is impossible because mic records at very low volume and other parties strugle to hear me. Microphone suppresion and voice enhancement are turned off, equalizer set to normal. PC companion shows most current version of software. Dear users and/or Sony, could you suggest for any solution?

Please consider this before buying Sony Xperia phones: Chat TranscriptPlease wait while we find an agent to assist you...You have now been connected to an agent.Emir: Hi Client Name! Welcome to Sony Xperia Support, my name is Emir.
I'm currently reading your message. In the meantime, I would appreciate if you kindly could leave your first and last name, your e-mail address and mobile phone number.Client Name: Client Name, [email protected], +37067530xxxEmir: How may I help you?Client Name: Hello, I have posted a topic about an software issue in Xperia Z1: http://talk.sonymobile.com/t5/Xperia-Z1-Z1s/Xperia-Z1-mic-issue-low-volume-when-using-WeChat/m-p/1020748/highlight/true#M44196Client Name: it was ignored by staff, so I posted another topic about how Sony ignores issues of flagship phone ownerClient Name: this topic was moved out of forum to this topic to be burriedClient Name: can I speak with someone in charge?Emir: No, there's no such contact I can refer you to,.Emir: I'm sorry to hear that your thread has not been replied to.Client Name: What do you mean? You're independant worker not accountable to anyone?Client Name: its been replied with default answer that all posters with similar problem receivedEmir: I'm a technical support agent for the chat, I don't have any information about the Forum team.Client Name: we are specifically ignored until Z1 goes broke and out of your problemsClient Name: I need someone in charge from your department who could personally overlook this issue that many users haveClient Name: its not just me, mic problems are apparent for many usersEmir: This issue concerns a third party app, and you have already been in contact with me regarding this issue. We can't guarantee that third party apps are compatible with your device since we do not develop them. I recommend that you contac the app developer for more information.Client Name: I dont understand why phone hacker can solve this software issue by themselves, but Sony engineers choose to ignore usClient Name: no, this issue also goes to many other apps, including native app TrackIDClient Name: its the problem in new Android releaseEmir: You may try a software repair to see if the issue persists in TrackID like the agent on the forum suggested - if the problem persists and you suspect there's something wrong with your device you may have it sent in to an authorized service center so that a technician may examine it.,Client Name: These steps were performed by other users with no luckClient Name: I wont repeat this to come to the sameClient Name: I ask engineers to look into solution developed by XDA team and implement for us normal usersEmir: Those are the troubleshooting steps I can refer you to in this case.Client Name: They dont work, please find another solution or ask for person who can do it, if you cantEmir: I have already provided troubleshooting steps, you may try that. If a software repair does not help then I can only refer to service.Client Name: I already told that these steps didnt work for other users, who have same problem. So you admit that you wont help your client?Emir: I can't suggest a possible solution other than what I've already suggested unfortunately.Client Name: So I have no choice, but to share our chat in all possible internet sources for other existing or would be Sony users to consider how they will be treated upon problems arise.Client Name: Thank you for your support, I hope you will be promoted for high quality service

DvForge mic plug and guitar plug

I just bought both the mic plug and guitar plug USB devices from DVForge. Their website made them sound pretty handy (close to no latency, better than CD quality recording), and I read no bad reviews.
Trouble is...they don't work. The mic plug gives me very quiet recording with hiss and horrible peaks. And the guitar plug gives me almost nothing at all.
Have I bought a pair of lemons? Or is something set up wrong? I'm using a sony F-VX650A mic, and a bog-standard semi-acoustic guitar. I notice that the mac recognises the device as "C-Media USB Headphone set" - whatever the **** that is.
Any ideas?

I'm a turkey. Just the input levels in system preferences. They work fine. Duh.
Incidently, the ** in "whatever the **" was subbed in for, wait for it, H..E..double hockey sticks. I apologize to the moderators for this uncharacteristically offensive turn of phrase. I shall adjust my language accordingly.

TS3474 I purchaed the earpods with mic & controls and they don't work with 6th generation nano. Are the features supposed to be compatible with this model of nano?

I purchased the earpods with mic & controls and the features don't work with 6th generation nano--is this normal?

Hi there,
According to the product page:
The remote and mic are supported by all models of iPod, iPhone, and iPad (not all models support volume up/down functions). Audio is supported by all iPod models.
Your iPod Nano may be one of the models that does not support the volume up/down function. Take a look at the page below for more information.
Apple EarPods with Remote and Mic
http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
-Griff

External mic inputs and speaker outputs for CP-7937G Conf Phone

Has any tried to connect the Polycom® SoundStation IP Multi-Interface to the Cisco Conference Station CP-7937G Phone, it appears to be the only way to get eextra mic inputs and line level outputs for enhancing conference call? See attached Quick Start Guide.

Here's where I am on interfacing external mikes, PCs, speakers, etc. with the Cisco 7937. It seems this I/O port is quite a mystery to both Cisco and the manufacturer (Polycom). There are virtually no technical specs for it anywhere on line. So, I bought a variety of cables and connectors and tried exploring. I could never get anything but input into the 7937 to work. I could never get any output from it despite the output symbol next to the port. Here are the input test results:
3 pole 2.5mm to dual stereo 3.5mm breakout cable didn't work at all
4 pole 2.5mm to stereo 3.5mm for input worked only on one pole (red connection). Half volume?
3 pole 2.5mm to stereo 3.5mm for input works only on white connector (louder?)
3 pole 2.5mm to mono 3.5mm for input, works (louder?)
2 pole 2.5mm to stereo 3.5mm for input, works
2 pole 2.5mm to mono 3.5mm for input ,works, and is simplest.
So, if you want to feed an external audio source into the Cisco 7937, almost any type of 2.5mm male connector cable at the 7937 will work
I could never find any mention of successful use online, and could not find an output signal myself, so I suspect the 7937 was just mislabeled.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

Okay before my ipod power and volume buttons werent working but i never dropped it, then one day i was in a app and my ipod froze so i held the home button down and the screen went a bright green color and isnt showing up in itunes

okay I just recently bought a ipod touch 4thG and im already having issues. recently the power and volume buttons stopped working after i syncd my ipod, i shrugged it off figuring it would come back i could live without it. but today I was on my ipod while it was charging and the screen just froze so i pressed and held the home button (being that's the only button that actually works) then the screen turned this bright yellowish lime green color and its not responding to ANYTHING! my computer isnt even reading it when i plug it up into itunes! so what should i do? can anyone help me? i feel like i just wasted $200...

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen

Ipod Touch 5.1.1 update lock and volume buttons wont work.

So I just updated my ipod touch 4G to the ios 5.1.1 version and ever since my volume and lock buttons aren't working/responding. The funny thing is, a lot of people are posting the same question but they get the same answer from the same person that says to hold the lock and home button when everybody specifally states that the lock and volume buttons aren't working so those answers are useless. I tried resetting all the settings to factory from the settings menu but still the same problem. What should I do? Is it a bug for every new updater?

Try changing the DNS server on the iPod. See:
iOS 5 update issues "Network...: Apple Support Communities

I have a number of apps on my Ipad2 that no longer have sound. I have checked setting on my ipad and the settings on the apps that have a settings and the sound and volume are ok. Do I have a virus in some apps?

I have a number of apps on my ipad2 tha no longer have sound. I have checked the ipad settings and the apps that have settings and all sound and volume are ok. Do I have a virus? Pandora sound is ok. It seems mostly to be games...angry birds, tap tap, and educational games for little ones. Any suggestions?

There aren't any viruses for iOS devices. Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.

I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all. I have already tried the following:
Switched the Lock Rotation/Mute settings in General
Power cycling it
Held the sleep and menu button to reset it (the button worked for that at least)
Done a network reset
Reset All Settings and restored from backup
Reset All Settings and restored from iCloud
Erase All Content and Settings and restored from backup
Erase All Content and Settings and restored from iCloud
If anyone has any OTHER suggestions besides what I've already tried, I am all ears. Thanks.

Go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

Mic Latency and Volume

Similar Messages

Maybe you are looking for