Minimum requirements for OEM 12c setup in VMware

All,
I am planning to setup OEM 12c Grid in my personal laptop vmware workstation for practice purpose.
Can anybody list me the minimum requirements for the OEM 12c setup i.e. min RAM size required, swap space, disk space etc..
Thanks in advance,
Mahipal

Aman.... wrote:
It took a minute over Google to get this,
http://www.oracle.com/technetwork/oem/framework-infra/em12c-sizing-1590739.pdf
Aman....Ha, I beat you with 48 seconds !!!
LoL
Edit: http://docs.oracle.com/cd/E24628_01/install.121/e22624.pdf

Similar Messages

  • Minimum requirements for home server

    I am looking to get a cheap iMac, Mini or iBook to use as a home server to run iTunes 24/7. I will be attaching an external HD for storage space for my media and will stream wirelessly to Apple TV over 802.11g using an Airport Express. What would be the minimum requirement for such a setup? Would the minimum requirement be what the latest version of iTunes require?
    Message was edited by: Mac4lfe

    Hi Mac4lfe: If you want to SYNCH between the Mac and the ATV, then any G3 will do, just expect the synching to be slow. If you want to STREAM from the Mac to ATV, then a G3 will do for music but not for video. If you want to stream video, a G4 will do, but you will get a lot of beachballs when you do anything on iTunes and sometimes the streaming will fail. I suggest you get the cheapest Intel Mac, you will have a much better experience when streaming. Lastly, remember you will need a screen for the Mini, there will always be warnings, error messages, updates, etc in iTunes that you need a screen, mouse and keyboard for. Very lastly, you can just get the ATV and buy music, TV shows, Movies and rent movies without a Mac. 160GP shall be enough. I have 40 movies, 20 full TV seasons and 6000 songs and am just over 400GB.

  • What is the alternative of F5 BIG-IP LTM Load Balancer for OEM 12c

    We want to implement service load balance, however oracle recommended
    F5 BIG-IP LTM Load Balancer for OEM 12c
    How much it is cost? and is there any free alternative we can use which supported by Oracle?
    Thanks

    Apart from F5, Cisco is another SLB vendor. I am not sure about any free alternative though.
    Note that regardless what SLB that you pick, it should meet the requirements documented in section 29.3.2.2 of the EM12c Release 3 Administrator's Guide:
    The SLB must provide support for multiple virtual server ports. Enterprise Manager typically requires that up to 4 ports are configured on the SLB (Secure Upload, Agent Registration, Secure Console, Unsecure Console)
    Support for persistence. HTTP and HTTPS traffic between the browser and the OMS requires persistence
    Support for application monitoring. The SLB must be capable of monitoring the health of the OMSs and detecting failures, so that requests will not be routed to OMSs that are not availa
    Regards,
    - Loc

  • What are the real minimum requirements for Mountain Lion?

    What are the real minimum requirements for Mountain Lion. Currently running Snow Leopard. I have a late 2006 Model: iMac6,1. Specs: 2.33 GHz Core 2 Duo, 3 GB 667 MHz DDR2, and the optional nVidia GeForce 7600GT c/w 256MB GDDR2. The advertisement is stating a 2007 model as the minumum, however the fastest 2006 Gen Plastic iMac should be faster then the slowest 2007 Gen Aluminum iMac7,1?

    From a previous posting from some else, I saw it was the 32bit versus 64bit video card driver being the issue. I was wondering if the optional video card I have installed also was limited to the 32bit issue. 64bit drivers exist for the 7600 GT GPU.

  • I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

    I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

    Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
    That will take you to 10.6.3.
    If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
    SL system reqmts;

  • The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation

    Hi Guys,
    Currently i am trying to install SCOM2012R2 with SQL 2012 SP1. When i proceed with SCOM installation, getting an error
    "The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
    Configurations document for further information.
    SQL Collation i selected as per System Center2012 guide SQL_Latin1_General_CP1_CI_AS
    Can some one please help me on this?
    Regards
    Kris
    Kris

    Hi,
    Please check logs for further information. Let us know what the logs says:
    http://www.systemcentercentral.com/opsmgr-2012-my-installation-failed-what-log-files-do-i-read-and-where-can-i-find-them/
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • After updating to lion installed graphics card does not meet minimum requirements for aperture

    Hello,
    I updated to OSX lion yesterday. and Apterture is given me this error message.  "The installed graphics card does not meet the minimum requirements for Aperture.   I tried the Option Command Open app thing to try rebuild the database.  But nothing happens when I try opeing the app using those combo key's  So I removed the app using mackeeper and tried reinstalling it. still same issue.
    I have following machine
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.3 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          8 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B0E
      SMC Version (system):          1.69f1
      Serial Number (system):          C02F94ETDMGG
      Hardware UUID:          132AE53D-0766-5E17-9F54-ED935D6F7AB3
      Sudden Motion Sensor:
      State:          Enabled
      Chipset Model:          AMD Radeon HD 6750M
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x8
      VRAM (Total):          1024 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x6741
      Revision ID:          0x0000
      ROM Revision:          113-C0170L-521
      gMux Version:          1.9.23
      EFI Driver Version:          01.00.521
      Displays:
    Color LCD:
      Resolution:          1680 x 1050
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
    VX2245wm:
      Resolution:          1680 x 1050 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          QD0064002266
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported
      Adapter Type:          Apple Mini DisplayPort To VGA Adapter
      Adapter Firmware Version:          1.03
    Display Connector:
      Status:          No Display Connected

    HAve you tried disconnecting the external monitor rebooting and then runnig Aperture?

  • My PowerBook-G4 operating system software - Mac OS X 10.5.8 - does not meet minimum requirements for downloading the latest version of  FireFox ... is there an Update for a newer version of my op.sys. software,  or,  what is a better choice of an Upgrade?

    my PowerBook-G4 operating system software  - Mac OS X 10.5.8 -  does not meet minimum requirements for downloading the latest version of  FireFox ... is there an UpDate  to a newer version of my op.sys. software,  Or,  what is a better choice of an UpGrade to a newer/different op.sys. software ?
    Thanx!

    The best maintained PowerPC browser at the moment is TenFourFox:
    http://www.floodgap.com/software/tenfourfox/
    It is a Mac port of a newer version of FF thatn any PowerPC Mac can support natively. It runs, looks and feel like FF.
    I found some add-ons that helped TFF with speed issues. Pleae see my post in another PPC forum:
    FYI: Speed-up for TenFourFox on PowerPC

  • I have a zte zmax andoid phone it had all the minimum requirement for Skype, I can't get to video ca

    I have a zte zmax Android phone it meets the minimum requirements for Skype, I downloaded Skype thru Google play store I also bought a $10 credit I cannot get it to video call the video icon is not showing up at bottom of screen and when I call other contacts and the icon does show up when I tap on it it does not switch to video call

    Help

  • Database Requirements for EM 12C

    Hello
    I have a few doubts regarding the EM 12c installation.
    1) What is the Oracle recommended database version to perform an installation for OEM 12c Release 2 Plug-in Update 1 (12.1.0.2)??
    2) Can an existing database instance be used for the the installation or else a new database needs to be installed exclusively for the installation of OEM12c.
    Any help is appreciated.
    Thanks

    Hi,
    1. All these DB versions are supported:
    5 Releases(11.2.0.3.0,11.2.0.2.0,11.2.0.1.0,11.1.0.7.0,10.2.0.5.0)
    2. Yes! Existing DB can be used, but if the DB had a DB Control configured, it needs to be dropped.
    NOTE: Make sure no other application is using this. Dedicated db is recommended.
    Regards,
    Venkat
    Edited by: venkata thiruveedhi on May 3, 2013 3:40 AM

  • Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

    Help.  I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
    I have not made any changes to my machine. Help  - I can't get to my images

    Try restarting your system.
    If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting.

  • Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
    System Requirements
    Minimum
    One of the following Intel-based Mac computers:
    Mac Pro
    MacBook Pro
    MacBook
    MacBook Air
    iMac
    Mac mini
    Operating system:
    Mac OS X v10.5.8 or v10.6.2 or later
    Memory:
    1GB of RAM
    2GB of RAM required for Mac Pro
    Other requirements:
    DVD drive for installation
    1GB of disk space for application and documentation
    7GB of disk space for Sample Library

  • This PC does not meet the minimum requirements for this version of iTunes

    Trying to update my iTunes, the installer gives the error message:
    "This PC does not meet the minimum requirements for this version of iTunes"
    I have gone through the procedures listed in the support section, and have completely removed all Apple software, deleted the file folders etc etc.... still no joy.
    This is most annoying as I've just received my brand new iPhone 6+ and I was trying to backup my old device to iTunes so I could restore it onto the new phone and get using it today.  Hacked off big time :-\

    Well I've eventually managed a work-around.  Ver. 11.5.1 was no good because it wasn't compatible with my iphone 5, next one wasn't compatible with my iphone 6+, eventually got 11.4 installed so I could back up my old iphone 5 to it, then restore that backup onto my iphone 6+, which then wasn't up to date with the current iOS so I had to do that before it would sync my apps.
    What a ball ache.
    If someone would kindly let me know when the latest iTunes works again I's appreciate it, until then I'll have to stick with what I've got.
    I need to start again with my music collection, re-import everything and get it on my iphone, because I had to delete it all a few months ago when iOS updated because it didn't have enough storage space on the device!  Somehow lost it all off my iTunes in the process!
    TBH I've always found the Apple system hideously complicated and infuriating when it doesn't work properly.  Instead of making it more and more complex it needs simplifying and making fool-proof so people don't have to go through all this BS just to use their **** phone!

  • Your system does not meet the minimum requirement for this update (9996)

    Hi
    recently had to reformat my system with windows 7 profesional. All windows updates where performed and all the drivers where installed correctly except the ethernet driver. windows 7 cannot find a suitable driver. I then downloaded the driver from the link provided on the hpe-590t download site, which is described as a intel gigabyte driver sp52222, however  the software driver comes up with the following message your system does not meet the minimum requirement for this update (9996). Has anyone had a similar problem.
    Hardware Ids are:
    PCI\VEN_8086&DEV_0000&SUBSYS_00008086&REV_00
    PCI\VEN_8086&DEV_0000&SUBSYS_00008086
    PCI\VEN_8086&DEV_0000&CC_020000
    PCI\VEN_8086&DEV_0000&CC_0200
    Regards artie 

    I solicited the the assistance of another one of our experts who is a driver guru, you may see his reply here:
    http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Paul-Tikkanen/m-p/4990422#M...
    I tend to agree that either the NIC is bad or possiblly a factory restore would help.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Installed graphics card does not meet the minimum requirements for AP...

    2006 MP with an HD 2600 and a 7300 GT card installed, 8 GB RAM, OS 10.4.11. Tried to install Aperture v1 from CD and got the error message "The installed graphics card does not meet the minimum requirements for Aperture" which disallowed upgrading to v1.5.6 because v1 would not install. So I downloaded and installed the v2 trial and got the same error message.
    The release lever on the 7300 card would not work so I left it in slot 1 for now rather than risk breaking the card. That put the HD 2600 card in slot 2, which is not optimum but I do not think it should cause problems.
    23" ACD connected to the HD 2600 card.
    Ideas? I perused the threads and found similar reports but no solutions.
    TIA
    -Allen Wicks

    Answering my own question, I moved the ACD connection to the 7300 card and v2 Aperture installed OK.
    Now I guess I need to get precise details on how to eject the 7300 card (mainly better directions than Apple's as to exactly what direction to force the release lever toward). I applied way more force than I am accustomed to and the card did not release.
    Comments appreciated, TIA.
    -Allen Wicks

Maybe you are looking for