Missing audio track when importing video into Premiere Pro CS3

When I import my M2TS video into the editor there is no audio when viewed in the source. There is also no audio track when I drag a clip down to the timeline. Any fix for this?

I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

Similar Messages

Help Trouble Importing Files into Premiere Pro CS3 !!

Before I reinstalled my computer, I was able to import HD MOV files into Premiere Pro CS3 without a problem but now it it says file not supported! what is going on?? Am I missing a driver since I reinstalled my computer? Thanks Please Help

like magic ! how cool...
you might mark thread answered so others dont keep going to it to " help " ...
good luck with new computer stuff...

Missing audio tracks when importing mp4 movie clip into adobe premier trial

I am trying to sanitize a movie clip by bleeping out the curse words in the clip. However when I import the clip on Adobe, I am missing 3/4 audio tracks; bringing the sound level way down. Can someone please assist me. I've been trying to fix it all morning!!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Missing audio tracks when importing raw from my PMW-350

I Have the Sony PMW-350 and i import directly to my computer from my SxS card but when i import it into PP and put it on the time line only one mono track appears and i know there should be at least 4 or more tracks

Works fine for me.
Win 7 CS6.03.
Did it work before?

How Important are ICC Profiles when Importing Stills into Premiere Pro?

Hello,
I came across the following troubling language in a review of one of Steven Hullfish's books on Color Correction:
"I also felt as though the author neglected to give ICC profiles enough attention.
Granted, they are seldom used in pure video workflows, but there are an awful lot of folks out there compositing still images into video content who need to know how to soft-proof against the right destination space in Photoshop so they aren't surprised by the color shifts they see in their ICC-unaware video software. Surely that should merit a pull-quote of its own somewhere."
My photos have been saved in PhotoShop in the ProRes color space. Is this going to cause unpredictablility in how my colors look when shown on a 30 foot screen?
Is Premiere Pro a type of what this author describes as "ICC-unaware" video software?
If so, what steps should I be taking?
Thanks,
Matt Dubuque, 100 Trees

Premiere Pro does not use ICC color profiles at all. Photoshop and After Effects do.
When you are working with non-color-managed applications, it's especially important that you preview your work and check your output on the same sort of device on which your audience will be viewing it.

Importing WMV into Premiere Pro CS3

When importing some wmv-files into Premiere only the audio-part imports. No video.
Other wmv-files imports without problems.
The problem seems to occur only with files converted (from mov?) to wmv on Mac-systems.

Henrik,
I'd do a conversion of the WMV's to DV-AVI Type II outside of PP. Import the converted files and you *should* be able to edit them. Quality will likely have taken a hit, but as you do not have the original files, that is the best you can do.
Always request that your client, or whomever, furnishes you with a DV-AVI Type II in the future.
Good luck,
Hunt

Importing MP4 Into Premiere pro CS3

Hi I'm Hayley, I was just wondering, I have footage in a strange format; .mp4, and it wont import into Premiere. Someone asked me if I had all the updates, etc, I do, and still no luck with it...
I was thinking of doing a reinstall of it, but if i do that, I will likely have to download all my updates and stuff all over again, and in the end, the mp4 thing still may not work.
Before I try the reinstall, I was just wondering if anything else can be done about the format.
Any ideas, friends?
Thanks in advance!

Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Once you know the codec, you may post again to ask how to edit what you have

Audio is out of sync when importing mp4 into premiere pro CC, how to fix?

Earlier versions had this problem, but while I was working with CS6 it was never an issue. Now it is an issue again. It is not simply the issue of audio lagging, or I could fix that by unlinking and adjusting. The audio is fine in some areas, lagging in others. Sometimes it is the video that is lagging and not the audio. The clips are perfectly fine outside of Pr.
Dimension: 1920 x 1080
Codec: H.264, AAC
Duration: 14:28
Audio Channels: 2
Please help me figure out what is going on? I would hate to have to begin reencoding all of the files of this camera, just because of such a glitch.
Thanks
Tiff

If you provide video file details, someone may be able to help
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Are you 100% sure that your editing sequence matches your video file... such as by using the New Item process?

What is the best codec to use when importing video into Premiere?

I have recently aquired Premiere cs6 and want to use the best possible format to edit with. I am going to use footage that I film with a DSLR (5D mark III) so I know the codec will be H.264. My question is: Is H.264 the best codec to use? Or, is there a better codec that Premiere likes to use?
Thanks!

>recently aquired Premiere cs6
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
And, A tutorial list in message #3 http://forums.adobe.com/message/2276578

"Missing Codec" when importing QuickTime-Video into Premiere Pro CS5.5. What can I do?

Dear Adobe Community,
I tried importing a QuickTime-Video into Premiere Pro CS5.5, which did not work because there was a codec missing. What can I do now?
Thank you in advance for your helpful comments!
lots of love
Flora

Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Import mpg video into Premiere Pro CS6

When I try to import video taken with a Sony Handicam DCR SX63 I get a "There was an error decompressing audio or video". In searching this issue I find many people with the same issue but never a resolution. Is there one? That a novice could implement??
MPG format is clearly stated to be compatible. Copied directly from camera to computer via USB it plays just fine. Converting it to a different format (MP4) with DVDVideoSoft Free Studio I can import it into Premiere Pro and do my splicing / editing.
But.. my end result is not as clear (and files are much larger) so feel if I could use the original and stay in that format.. my results would be much better.
My project is very simple.. combine some clips, remove some bad footage and burn to a DVD.. any advice on alternate formats would be appreciated as well.
Thank you for your time
Ralph

Thank you for your time John.
Your last link deals with taking files off a SD card.. this is not my case but there is mention of renaming files creating a problem. So.. I re-download all my video from my camera using Windows Explore and copied the entire folder and root (Videos\MP_ROOT\101PNV01). My previous download using Windows Media.. did in fact rename the files. However I get the same error when trying to import with Premiere Pro.
In my previous searches for a solution I was pointed to your mediainfo applet.. running that on any of the newly downloaded video gives me this report: Open to more suggestions..
From MediaInfo:
General
CompleteName                     : D:\Videos\MP_ROOT\101PNV01\M2U00026.MPG
Format                           : MPEG-PS
FileSize/String                  : 77.7 MiB
Duration/String                  : 1mn 9s
OverallBitRate_Mode/String       : Variable
OverallBitRate/String            : 9 371 Kbps
Video
ID/String                        : 224 (0xE0)
Format                           : MPEG Video
Format_Version                   : Version 2
Format_Profile                   : Main@Main
Format_Settings_BVOP/String      : Yes
Format_Settings_Matrix/String    : Custom
Format_Settings_GOP              : M=3, N=15
Duration/String                  : 1mn 9s
BitRate_Mode/String              : Variable
BitRate/String                   : 8 929 Kbps
BitRate_Maximum/String           : 9 100 Kbps
Width/String                     : 720 pixels
Height/String                    : 480 pixels
DisplayAspectRatio/String        : 16:9
FrameRate/String                 : 29.970 fps
Standard                         : NTSC
ColorSpace                       : YUV
ChromaSubsampling                : 4:2:0
BitDepth/String                  : 8 bits
ScanType/String                  : Interlaced
ScanOrder/String                 : Top Field First
Compression_Mode/String          : Lossy
Bits-(Pixel*Frame)               : 0.862
TimeCode_FirstFrame              : 00:00:00:00
TimeCode_Source                  : Group of pictures header
StreamSize/String                : 74.0 MiB (95%)
Audio
ID/String                        : 189 (0xBD)-128 (0x80)
Format                           : AC-3
Format/Info                      : Audio Coding 3
Format_Settings_ModeExtension    : CM (complete main)
Format_Settings_Endianness       : Big
MuxingMode                       : DVD-Video
Duration/String                  : 1mn 9s
BitRate_Mode/String              : Constant
BitRate/String                   : 256 Kbps
Channel(s)/String                : 2 channels
ChannelPositions                 : Front: L R
SamplingRate/String              : 48.0 KHz
BitDepth/String                  : 16 bits
Compression_Mode/String          : Lossy
Video_Delay/String               : -70ms
StreamSize/String                : 2.12 MiB (3%)

Audio problem when importing video files.

Hello everyone,
I just started using FCP X a few days ago for a university project and I seem to encounter an audio problem when importing videos in .mp4, .mov format or via the import from camera option.
Indeed I need to import videos in .mp4 and .mov format into FCP X. The import in itself is normal I can see my videos into the events/clips library and if I play them from the library I can hear the sound quite perfectly.
However, when I want to edit my videos and put it in the timeline, there is no audio. As a result I started to think that my videos could be the problem so I tried the option "import from camera" option using the Isight camera of my macbook pro but the same things happened. I could hear the sound from the events/clips library but not from the timeline (I can't see any audiowaves in the timeline).
I found a solution using quicktime and extracting the audio of the video in .m4a then importing the videos files and the audi files corresponding but it's a long process and a waste of time as FCP X should be able to import the audio of my video into the timeline directly. Especially if it can read it from events/clips library.
I hope I explained myself clearly and you could help me resolve my problem.
Cheers
Christophe
PS: I'm using FCP X version 10.0

Update to 10.0.5.
You have an incorrect setting when you edit. Try trashing your preferences. Post screen shots of your timeline and toolbar.

CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4

CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4 they only appear in the monitor when the play button is activated. The other clips appear without a problem. I noticed that the same situation arises when I dynamically link to Encore CS4. What am I doing wrong?

Thank you Ann. But the problem is when switched on the AE clips on the timeline are only viewable when I start the project (ie press the space bar) and as it also doesn’t appear in Encore I am afraid to spend a great deal of time creating a DVD with these clips not appearing. Any advice?
Regards and again many thanks
Stanley

Can animated titles created in Titlemotion imported into Premiere Pro CS3?

Hi,
We are using Titlemotion Software(Standalone Version)for creating animated titles.
We would want to use these animations into Premiere Pro CS3.
We can save the animations made in Titlemotion as
1) an FX-script,
2) a targa sequence &
3) a '.VIA' format.
'VIA' files created in Titlemotion do not get imported into Premiere Pro CS3, Premiere Pro informs that they are not supported.
Is there any way to import a .VIA file into Premiere Pro CS3?
OR
Is there any work-around wherein animations created in Titlemotion Pro could be taken into Premiere Pro CS3?

Save as a targa sequence with an alpha channel.

Importing sound into Premier Pro CS3

I have a Sony HDR-XR100 HD video camera. It saves files with an .m2ts extension. This extension is not supported by CS3. Using Sony's PMB (Picture Motion Browser), I convert the .m2ts files to .mpeg2. When I import these files into Premier, they appear, but have no audio. How do I import the audio? Thanks.
David

I put it in the main Premier folder, presumably like you did, and it worked. I'm not real familiar with Macs, but the folder I put it in was "C:\Program Files\Adobe\Adobe Premiere Pro CS3". There are several other files there with similar names. If that doesn't work, I'm lost, since obviously I had to come here for help myself :).
David
Date: Fri, 23 Jul 2010 19:40:24 -0600
From: [email protected]
To: [email protected]
Subject: Importing sound into Premier Pro CS3
Hey, I'm using CS for Mac and I'm having the same issue , importing .mpg into PPro and get no audio.
I found the ad2ac3dec.dll file online but I'm not sure what folder to place it in. I've found the folder named Adobe Premire Pro CS3 and just pasted it into that but it didn't work.
My camera only records in .mpg and I really don't want to spend money on a converter after spending a bucketload for CS3...
Any help would be much appreciated!
>

Missing audio track when importing video into Premiere Pro CS3

Similar Messages

Maybe you are looking for