Missing pictures after install

I have installed Photoshop and Bridge CC using Maverick. I no longer have my pictures from CS 4 in Bridge CC or Bridge CS 4 (or anywhere I can find them for that matter)

Will not affect your folders. Images will be is same location. You wlll have to rebuild the cache as CC can not read CS4 cache.

Similar Messages

How can I retrieve my contacts and pictures after installing iOS6 on my iphone?

How can I retrieve my contacts and pictures after installing iOS6 on my iphone? Don't call me stupid! I was relying on iCloud to have backed all this up, but turns out it didn't work. Can anyone help me get my photos back - they were of my baby daughter. Also, I've lost all my contacts. Please help.

Unfortunately no. The only way the phone backs up is if you make it back up. You either connect to iTunes and backup and sync, or you set it up for a wifi sync to iCloud. But you have to setup iCloud to start with. You have learned a hard lesson on how to make sure you import pictures on a regular basis like you would the digital camera. When things happen to the phone, this is the media that is lost the most (pictures in camera roll). After taking a number of pictures, and especially ones you consider important, you should connect the phone to the computer and import them, so there is a backup copy on the computer.
Contacts are saved in the backup as well, however they are really designed to be synced to a supported application on the computer, or backed up to iCloud or other cloud service. And, the only way to go back in time on the phone is to restore from a backup, but you also have to remember, you would lose everything on the phone that you had done since that backup, so it is a double edged sword.

Missing pictures after migration to Photos

Hi,
I'm really sad to see how quality in Apple services has decreased.
To begin with, my iPhoto was getting way too slow, so I was forced to split my library into many other libraries.
After Photos was released, I updated the system so I could migrate my libraries from iPhoto to the new Photos.
The migration lasted a week!
When it was finally finished, I went on to check the number of pics.
There was a huge difference, with almost ten events missing pictures.
I did not even enable the iCloud feature.
And guess what? It's still slow.
How can I trust a system like this?
I'm really disappointed.

Thanks for your reply but I'm still confused as to how I lost over 10Gigs of HD space after the migration. I understand the conversion is supposed to create more space, not less. When I look in the pictures folder in Finder, I see 2 LIbrarys, iPhoto and Photos, each of them approx 15 Gbs. according to the Get Info menu. I guess what I don't understand is if the iPhotos Library is not needed and is moved to an external drive why that wouldn't free that amount of space.
Also, if "optimization" is supposed to move "some" high res images to the cloud to make room on the HD, how is it that I find myself with only 1gb left on my HD? What is the criteria that triggers "optimization" and how much room can we expect it to shoot for? There seems to be a variety of answers on this subject, many of them sound like guesses. Apple's explanation is vague about how it works, so hopefully someone has the accurate, in depth scoop on this.

Missing templates after installing 10.1.3 - no diagrams

Hi,
Ive happily used 10.1.2 for UML Class diagrams etc recently, have downloaded the full install for 10.1.3 (as very interested to try out the Sequence diagrams).
After installing 10.1.3 I notice there are very few Application templates available (only "No template" and "Java App") - so there is no Diagram option under the General category when creating New.
What setup do I have to perform to activate the Diagramming options ?
Is this covered in the installation Readme anywhere ?
Thanks. Darren.

Darren,
Glad that helped, if you have any comments or suggestions about the Sequence Diagrammer, please post any feedback you have and I will pass it on to the Developer.
Regards,
Lisa Sherriff
JDev QA

IPhoto 5 can't find my pictures after installing a new hard drive.

I had a corrupted hard drive which I was able to get going again with Disk Warrior. I backed up my i Photo Library on external storage and then installed the new drive and reinstalled OS 10.4.10 on my old G4. I then installed iLife 05 and tried to open iPhoto. I got an error message stating: "You can't open your current iPhoto library using this version of iPhoto".
After I read the iLife 05 missing manual I found out that you shouldn't save iPhoto files this way. I can't imagine having to burn DVD's in order to save picture files. What ever happened to "it is intuitively obvious on the Mac".
Is there any way for me to recover these picture files? I downloaded an iPhoto library manager but that was no help. Is this file recovery problem easier with iLife 08? I am getting a new iMac later this week with iLife 08 available with it..............donn

Problem solved
I moved all of the iPhoto files into trash and then restarted the machine and reinstalled iPhoto 5. I used my oldest iphoto library file and everything worked. I was a little surprised that the install program was not more selective in picking up a library file.
Everything is working fine now. Thanks for your help....donn

Safari won't load pages with pictures after installing Maverick

I have an older iMac (2008), but it runs great and I have no problems with it. Except now that i installed Maverick, now Safari doesn't work properly. For most things, it works fine, then It will quit in the middle of a page. Or, I have uploaded photos to the Walmart site and had pictures printed. I can now access everything on that site except my photos and projects. I get all the background ads and stuff, but not the actual photos. That part of the page is blank. There is not eeven the box with the question mark. I kow they are still there because I can open them with Chrome. I have tried all the tips I can find here, plus, I have tried Customer support for the website I am having problems with. The CS people tell me it probably is a temporary problem, but I don't think they are Mac peaple. So, far, nothing I have tried has helped. I did have this same type of problem when I upgraded the last time, but was able to fix the problem. Just wish I could remember how I fixed it.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Missing folder after installing myapplication with AppBuilder 8.5

In the project property for the installer, I created a data-folder for my application. This folder is for later use with the myapp. So during installation its empty.
After installation on the target PC, I miss the folder. Only the folder with the myapp has been created.
My system: LV8.5 full, AppBuilder on winXP SP2
Any idea?
Andreas

The installer builder does not support creating an empty folder. It's a feature that's been requested for a while, and we'd like to add it, but it has not been a high priority feature. The workaround is to install a dummy file (0 bytes) to the folder. Or you could configure the installer to run a batch file that creates an empty folder. The downside to using the batch file, however, is that the uninstaller won't know to remove the folder.

Super Grainy picture after installing new graphic card

I followed all directions to a "T" with removing the old card and installing the new card. Its in the correct AGP slot. When I turned on the computer my desktop was black and white and super grainy looking. I could barely see anything. I then installed the software and that was successful but my display still looked the same. I then restarted my computer and it took a little longer than normal to come up. However when it finally came up, I have NO picture now. I use a HDTV for a monitor since I do video editing. I am using a DVI cable from computer to TV. I should note that when I first turn on the computer I can clearly see the screen with the APPLE and spinning gear. After that it goes down hill in terms of picture quality.
What could be wrong?
The card is a ATI RADEON 9600 PRO and was recommended for Powermac G5's.
I am typing this from my laptop while I am working on my desktop. I just did a hard turn off/restart and this time my desktop came up much faster and I can see it a lot better but there is still grainy noise on 90% of the screen. My DVI cable is fully connected as well.
Any suggestions?

Hi-
Because you are connected to a TV rather than a monitor, it could be that the resolution is not set correctly.
Try to set a different resolution for the screen through you Display System Preferences. If you can't see properly, try a boot to Safe Mode (hold Shift while starting) and then open the Display preference panels.
You will have to restart normally, after setting the resolution, to test the change.
If you have a computer monitor, try the monitor. If the monitor exhibits the same problems, I would consider that that particular card is the problem, and would return it.

SharePoint 2013 Configuration Wizard Missing Components after Install ServicePack 1

Hello,
today we have installed SharePoint Service Pack 1 for SharePoint Server 2013 inclusive Service Pack 1 for all language packs (we used the new released Service Packs).
Our SharePoint Environment has only one SharePoint Server.
Many
language packs
are
installed
on
this
server.
If we try to run the configuration wizard through the GUI, then we get the following error:
If we try to run "psconfig -cmd upgrade -inplace b2b -wait" then we get also an error:
SharePoint Products Configuration Wizard version 15.0.4569.1503. Copyright (C) Microsoft Corporation 2012. All rights reserved.
The upgrade command is invalid or a failure has been encountered.
The server farm will not work with missing installs. Add "-cmd installcheck -noinstallcheck" to the command-line to ignore this warning.
The following is missing on :
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 Language Pack (KB2880554) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
Service Pack 1 for Microsoft SharePoint Server 2013 (KB2880552) 64-Bit Edition
We checked the Installation in "Programm and Features", result see below:
Next step we run the PowerShell command: Get-SPProduct -local, result see below:
ProductName
Required Missing   Servers
Language Pack for SharePoint 2013 - Bulgarian/български                              True
{ServerName, }
Language Pack for SharePoint 2013 - Croatian/Hrvatski                                True
{ServerName, }
Language Pack for SharePoint 2013 - Romanian/Română
True               {ServerName, }
Language Pack for SharePoint 2013 - Thai/ไทย
         True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (PRC)/中文(简体)    True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Chinese (Taiwan)/中文 (繁體)   True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Czech/čeština                 True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Danish/dansk                  True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Dutch/Nederlands              True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Finnish/suomi                 True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - French/Français               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - German/Deutsch                True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Greek/Ελληνικά                True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hebrew עברית                  True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Hungarian/magyar              True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Italian/Italiano              True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Japanese/日本語      True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Korean/한국어                    True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Norwegian/norsk               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Polish/Polski                 True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português          True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Portuguese/Português (Brasil) True               {ServerName, }
Language Pack for SharePoint and Project Server 2013 - Russian/русский               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Slovak/Slovenčina             True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Spanish/Español               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Swedish/svenska               True               {ServerName,
Language Pack for SharePoint and Project Server 2013 - Turkish/Türkçe                True
{ServerName, }
Language Pack for SharePoint and Project Server 2013 - Ukrainian/Українська          True               {ServerName, }
Microsoft SharePoint Server 2013
True               {ServerName, }
What's the mistake?
Why we can't run the configuration wizard?
Has anyone answers?
Thanks a lot.
Regards Mario

try to run the below command on all server in the farm and then run the config wizard
Get-SPProduct -Local
Above command basically update the product information into the configuration database. Read this blog from the Trevor.
http://thesharepointfarm.com/2013/12/the-magic-of-get-spproduct-local/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Missing fonts after installing Illustrator CC

Illustrator CS5 and CS6 (and previous versions) came with a set of core fonts, e.g. Myriad Pro, included upon install.
I uninstalled Illustrator CS6 (and all other CS6 products) before installing Illustrator CC, but none of the fonts were included, so in Illustrator I have no MyriadPro (the font appears in the font list, but has an asterisk next to it to indicate a subsitution is being made). Are these fonts no longer included?
Okay - fixed. A restart later and the fonts are there. They must be registered with Windows on restart, which is an odd way of doing it as there's no requirement that the computer be restarted between font installations.
Message was edited by: tompagenet

Thanks for the reply, but the problem is deeper than that. After Illustrator CC, the font is invisible to every program except Illustrator CS6. So it appears that Illustrator CC has "removed" the font from my computer with the exception of Illustrator CC. In any case, I have thousands of documents that use this font. I'm not sure how I can deal with this.

MISSING PICTURES AFTER SOFTWARE UPDATE

I recently did a software update on my HTC Thunderbolt and now I notice that I am missing some of my pictures. It's the ones I saved to my SD card from my messages. Is there any way for me to retrieve them???

Thank you to the community for your engagement. Your help is very much appreciated.
sabs318, are those the only pictures missing? Are the pictures taken from your camera saved on the SD card? Have you checked if they are saved on the device memory?
Did you try acraftlady's suggestion?
Please let me know.
Thank you,

Adobe X - Chinese font missing. After install still does not work

In adobe X when opening some pdf documents, adobe is asking for a chinese font. I have downloaded the font from the link in the message, but afterwards the same error message still appear - also after restart of the whole PC. Running windows XP
Is there somehow that I can check if this has been installed correctly or somewhere there are further logs ?

Hi rossoneris,
Please check the 'Fonts' folder if you have installed Chinese fonts or not.
What error do you get when you try to open the pdf's?

Missing services after installing BAM 10.1.3

I have installed BAM 10.1.3 on my laptop under Windows XP. My database is OracleXE.
Eveything seemed to have worked. But for some reason I only have one Oracle BAM service (Oracle BAM Enterprise Link Data Flow Service). All the other services are not present. When I try to access the BAM console I get server errors...
Does anyone know what the problem could be?

Can you try reinstalling Oracle BAM again ? (donot uninstall old install) Use the same directory names. My 1st guess -is that user pressed finished after EL installation .... and stopped the installation from completion.
During installation -it shows the log file for install -pl verify this log file also for any problems etc. And let us know.
And to double checck- your dos %PATH% variable should have c:\oraclebam\oracleclientforbam as the 1st parameter

Can't add pictures (after installing iphoto 11)to a book done in iphoto 09

Hey,
I've done a book in iphoto 09. I've installed ilife 11 and now I can't open the field "pictures" to add some pictures to the book. Iphoto freezes. I got 16 000 pictures.
I've tried the "rebuild" and it's not working.
Can someone help me?
Do you think I can continue to do my book but without opening the 16 000 pictures?
Thanks

I am sorry if I am not completely following you, but I think I am now.
To put it shortly, I didn't have any issues taking a photobook that I started in '09 and continuing it in '11.
Backing up is key before doing too much, cuz you don't want to get further in a rut than you already are. It does take a while for my computer to pull up all the photos that I have in the album project folder. Over 4,000 photos and 4GB RAM--- maybe you just have to be patient. I've had it before that something seemed like it was taking forever and even the command-option-esc key said it wasn't responding, but it eventually thought through it and the process completed. (I was trying to print to PDF some photobook pages that had maps on it, and that takes more time sometimes.)
You could try just pulling your photos from your library into the photobook again and see if that works.
If patience or dragging doesn't work, then my next goto would be to try to go back to the library before you updated. By this, I mean, hopefully, you backed-up your iPhoto Library onto an external hard drive before upgrading (copying the entire iPhoto Library Folder onto an external hard drive).
If this is the case, I'd copy that iPhoto Library back onto my Hard Drive making sure that it doesn't overwrite the Library you have now especially if you have uploaded more photos while using '11. Then, making sure I am exited from iPhoto, while holding down the control key and clicking the iPhoto application to start (keep holding down the control key), a library choosing box will appear. You will have to then direct it to where you just copied your '09 backup. Then, choose that library. It will open and go through the transition again from '09 to '11.
If this does the trick, you can delete the library you were monkeying with before, unless there are new photos/videos you have uploaded while using '11. In that case, you will want to get those photos exported from that library and import them into your newly updated library.
Let me know if this seems to be what would fix your problem? I mean, it is still dependent on whether this will fix your photos issue with your photobook, assuming something went wrong in the transition phase in the first place.

Missing drivers after installing Win7

Hallo
On my just new macbookpro, i installed an original Win7 home premium 32bit.
All seemed to go right, Windows is working ok, but most drivers are missing!
How to pick them up from internet if you cant't be connected to??
Where can i find them (the right ones)
thanks

Below is reproduced a procedure the BC Install Manual suggests.The Windows install DVD can do the same sort of thing if it is the Windows drivers that are missing.
You can find the entire PDF document here:
http://manuals.info.apple.com/enUS/Boot_Camp_Install-Setup10.6.pdf
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorer and double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions. If a message appears that says the software you’re installing has not passed Windows
Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example, if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.
To reinstall a specific driver:
1 Insert your Mac OS X installation disc. 2 Quit AutoRun if it opens. 3 Using Windows Explorer, locate the driver that you want to reinstall. 4 Open the driver to start the installation.

Missing pictures after install

Similar Messages

Maybe you are looking for