Missing System under Product Version at Maintenance Optimizer

Hello Colleagues,
We currently using SAP Solution Manager 4.0 SP11 for our SAP landscape.
For upgrade our new PI 7.1 system with EHP1 we need to download respective files at SAP Solution Manager with the Maintenance Optimizer.
Under Product Version (pull down menu) at Maintenance Optimizer (TC DSWP) I am only able to select the Solution manager itself. Not the already configured PI system under System Landscape (TC SMSY).
Any idea why I am not able to select the PI system?
Many thanks in advance!
Regards,
Jochen

Hello Jochen
1. Are your Solution Manger system and P1 system in same Solution(system landscape) ?
2. Or each of the above two systems has different solution ?
If yes in the first case, then this might be filter problem in initial screen of MOPz. On the right corner you can see filter options. click on it and check if are able to select all of your systems under this Solution in which you are running MOPz tcode.
If 02nd option is true, then you should run MOpz tcode in the correct solution, in which the system P1 is maintained.

Similar Messages

BDC Error in transaction C223 - production version mass maintenance

Hi Experts,
         I have created a BDC recording for Tcode - C223. In my case for each plant and material there is a production version. if production version already exists, then we have to modify the record, if no record already exists, then we have to create and have to press save. When i was recording the transaction, i have changed the existing record and pressed saved, it has given the message record saved successfully.
          But in BDC when i was running the same recording, it says function code not possible. I was giving my code, please let me know how to solve the issue.
PERFORM bdc_dynpro      USING 'SAPLCMFV' '1000'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTE'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'MKAL-WERKS'.
    PERFORM bdc_field       USING 'MKAL-WERKS'
                                  wa_record-werks.
    PERFORM bdc_field       USING 'MKAL-MATNR'
                                  wa_record-matnr.
    PERFORM bdc_dynpro      USING 'SAPLCMFV' '1000'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ENTE'.
    PERFORM bdc_field       USING 'MKAL-WERKS'
                                  wa_record-werks.
    PERFORM bdc_field       USING 'MKAL-MATNR'
                                  wa_record-matnr.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'MKAL_EXPAND-PRVBE(01)'.
    PERFORM bdc_field       USING 'MKAL_EXPAND-MATNR(01)'
                                  wa_record-matnr.
    PERFORM bdc_field       USING 'MKAL_EXPAND-VERID(01)'
                                  c_verid.
    PERFORM bdc_field       USING 'MKAL_EXPAND-TEXT1(01)'
                                  wa_record-text1.
    DATA l_adatu2(10) TYPE c.
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
      EXPORTING
        date_internal = l_adatu
      IMPORTING
        date_external = l_adatu2.
    IF sy-subrc <> 0.
    ENDIF.
    IF l_adatu IS INITIAL.
      PERFORM bdc_field       USING 'MKAL_EXPAND-ADATU(01)'
                                    sy-datum.
    ELSE .
      PERFORM bdc_field USING 'MKAL_EXPAND-ADATU(01)'
                                  l_adatu2.
    ENDIF.
    PERFORM bdc_field       USING 'MKAL_EXPAND-BDATU(01)'
                                  c_date1.
    PERFORM bdc_field       USING 'MKAL_EXPAND-STLAL(01)'
                                  c_1.
    PERFORM bdc_field       USING 'MKAL_EXPAND-STLAN(01)'
                                  c_1.
    PERFORM bdc_field       USING 'MKAL_EXPAND-PLNNR(01)'
                                  wa_record-plnnr.
    PERFORM bdc_field       USING 'MKAL_EXPAND-ALNAL(01)'
                                  wa_record-alnal.
    PERFORM bdc_field       USING 'MKAL_EXPAND-PLNTY(01)'
                                  wa_record-plnty.
    PERFORM bdc_field       USING 'MKAL_EXPAND-SERKZ(01)'
                                  c_x.
    PERFORM bdc_field       USING 'MKAL_EXPAND-MDV01(01)'
                                  wa_record-mdv01.
    PERFORM bdc_field       USING 'MKAL_EXPAND-ALORT(01)'
                                  wa_record-alort.
    PERFORM bdc_field       USING 'MKAL_EXPAND-ELPRO(01)'
                                  wa_record-elpro.
    PERFORM bdc_field       USING 'MKAL_EXPAND-PRVBE(01)'
                                  wa_record-prvbe.
    PERFORM bdc_dynpro      USING 'SAPLCMFV' '1000'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SAVE'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'MKAL-WERKS'.
    PERFORM bdc_field       USING 'MKAL-WERKS'
                                  wa_record-werks.
    PERFORM bdc_field       USING 'MKAL-MATNR'
                                  wa_record-matnr.
    CALL TRANSACTION 'C223' USING it_bdcdata
                                  MODE 'A'
                                  UPDATE 'A'
                       MESSAGES INTO tmess_mtab.
my record was like this
1038        37581     MG CY/CC WINTER HB ENTREE   1       50084122     2     N     M100     0200     0200     SA02
Thanks & Regards,
Poorna.
Edited by: poorna on May 10, 2009 4:52 PM

Thanks

How to add new product version in Mopz?

Hi,
Can anyone guide me how to add a new product version in maintenance optimizer?
I am going to get the stack file of Netweaver gateway 7.4, but without the product version, I could not proceed.
Thanks in advanced.

Dear Friend,
1. Maintain Solution Manager information in the system’s SLD data supplier. In case of ABAP system using tcode RZ70 and incase of Java system using the Visual Administrator/NWA(for NW 7.3 onwards)àSLD data Supplier.
2. Once the data supplier jobs gets executed you system will appear under SMSY under Server, Database and (Technical System in case of Java systems).
The ‘Data Source’ should be LMDB.Note: Please don’t changes to the system in SMSY
3)Execute transaction code ‘LMDB’ in your solution manager system.Select Technical system(Give Application server ABAP and SID of the Server)
4)Click on Edit and select Software
Click ‘Add’ and it will show Product Version screen and search for your installed product.
5)Select your relevant usage types and once done choose ‘Close’ and save the data.
6)Assignment of Product System :
Click ‘Assign to Product System’
Now Product system does not exist, hence we have to create one. Choose ‘Create’ and confirm
7)After that complete Landscape Verification check..it should be green.
8)Go to Solman_setup and complete Managed system configuration.
after that Create Maintainence transaction and generate stack file.
Before doing all activities make sure that ST-PI and ST-A/PI Patched should be applied in Managed server(NW 7.4) and run rtcctoll.
Regards
Maruthi V

Adding a system to Solution in Maintenance Optimizer

Dear All,
We have installed two NW systems. One is based upon NW 7.0 EHP 2 and the other is based on NW 7.4 SR1. On both of these, we intend to install Duet Enterprise 2.0 add-ons. I have been asked to calculate the SP stack for both NW releases. Based on my limited knowledge of Solution Manager, I have created a solution "Duet Enterprise" and added both systems info in SMSY (server, database etc.). Now, when I create a maintenance transaction in MOPZ, I am unable to see any system in product version in the operations tab as compared to another solution which shows a system SPR (please see attached screenshots).
Please advise the steps through which I can add a system so that it shows in the Duet Solution.
Greatly appreciate any help provided.
Kind regards,
Amer.

Hi Amer
Have you checked below links
Maintenance Optimizer - Solution Manager - SCN Wiki
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
make sure you have lmdb entries properly reflected for these systems and above links gives more insights for mopz.
Thanks
Prakhar

Maintenance Optimizer in SAP Solution Manager

what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
     Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
     Select Header Data
     Click Installed Product Versions
     In the product box add whatever you require for this system
     Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
     User:      <Username>
     Pass:   <Pass>
     Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
     Select NEW
     Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
     Select Solution Landscape Maintenance
     Select System Groups and Logical Components Tab
          Open Solution Landscapes
               Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
     GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply

Change the Product version from ECC to ERP 6.0

Hello Experts
I am planning to apply EHP4 on my Development ECC system. In line with the the suggestion from guide "How to install SAP Enhancement Package 4 for SAP ERP 6.0" system I am supposed to define my ECC system with leading product version ERP 6.0.
My Ecc system is currently defined with Product version SAP ECC 6.0.
As per the above guide and also suggestion from "Note 1344564 - Maintenance Optimizer: Check system landscape" which says-
"In particular for a system of the product SAP ERP, assign the product version of SAP ERP, not SAP ECC."
I am supposed to change the leading product version to ERP 6.0.
Now with the current definition of system with product version SAP ECC 6.0, it is being used in a logical component. In order to change this I need to delete the associated logical component. The problem is -this logical component is being used in more than one Project definition that has huge documentation associated with them.
My question -
will the deletion of current logical component affect my documentation in any way?
How can I change the product version from SAP ECC 6.0 to SAP ERP 6.0 without affecting the current setup?
Regards
Dhiraj

Hello Warren,
Thanks for the suggestion.
I have already taken care of all the suggested notes in the master note that you suggested. I am able to generate the XML file for other solution defined in my system. In those I have my ECC system defined purely as ERP 6.0 system. I am not able to make out why its not generating the XML for this solution.
Regards
Dhiraj

SLD to SMSY synchronization - Which product version do we have to choose ?

Hello,
We do have a CPP system running on SAP ECC 6.0 version.
1. In SLD, we do have the list of all "Software Components" used in CDP.
We do not have the "PRODUCT VERSION" of the managed system.
2. With job SAP_SLD_DATA_COLLECT (RZ70), all data are sent from CDP (managed system) to SLD.
3. With LANDSCAPE FETCH job, all data are synchronized between SLD and SMSY.
Now, how can we choose the right "PRODUCT VERSION" to set in SMSY ?
As far as there is not "PRODUCT VERSION" defined in SLD, do we have to set manually a PRODUCT in SMSY ?
Is there any guide or OSS Notes which describe, step by step, the full workflow process synchronization
from (1) Managed System to (2) SLD to (3) SMSY ?
Thanks
Best regards
PC

Hi,
As I have observed, when the data sync happens between SLD and SM system, the product versions are also assigned.
Sometimes, the product assigned through SLD sync may not be correct or may be irrelevant to your scenario,
In that case, you should always manually edit and assign the correct product version in SMSY, to avoid any conflicts arising in further setup of EWA, SMD setup etc.
For ECC 6.0, you can goto SMSY>systems>search for SAP ECC-->your system CPP/CDP should already be present under SAP ECC through SLD landscape fetch job.
Select that system, and in the header data tab u can see the Installed product versions.
There you can always change the relevant products for your systems.
Hope this helps.

Assign patch levels for component versions of system: Maintenance Optimizer

Hello,
I am trying to have Maintenance Optimizer check for what files I need to download. However, I get the following error:
Assign patch levels for component versions of system SXM.
I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
Does something read that information from the child system and populate the data automatically? This is a new system install, and perhaps a step was missed in solman.
Thanks,
John

Hi John,
MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
MOPZ is created to point you to the available Support Package Stacks for its products.
Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
If this is your case, you´ll need to redefine the satellite system again in our solution manager.
hope this helps.
Valdecir

Maintenance optimizer transaction dont see product version for a solution

Hi,
I am having a very difficult time in understanding the concept of solution manager product system,instance,solution. Now, in Technical Administration >> Solutions >> I click on a solution, in the solution the product column is missing. Then it appears after some configuration.
Now, when I create a maintenance optimizer transaction, I select the solution but I don't see the see product version, nothing appears.
Please guide

Hi Shashank,
If I am getting you correctly then you are not getting product version in drop down in a new MOPZ transaction ?
Use below steps:
Run Transaction Solman_Workcenter.
Select the Solution Manager Administration tab.
Click Solutions.
Either.
Create a new Solution to add the logical component, or add it to an existing solution.
If a new solution...
Click on New.
Give the solution a name.
Set the Solution Data settings.
Now the Solution exists.
Select an existing solution that you want the System to be placed (can be the new one).
Add the Logical Component to the Solution.
If the system is other than Type Production then...
Go to change edit mode.
Right click on the SID, and select “Put in Solution” the cell the SID is in will turn green.
Save.
Regards,
Divyanshu

Nothing displays in Product Version Dropdown of Maintenance Optimizer

I'm trying to download patches/packages via Solution manager . The problems is my systems have disappeared from the Product Version dropdown. This was working fine last weekend. I've made no changes to my systems
Solution Manager -> Solution Operation -> Change Management -> Maintenace Optimizer -> Create New Maintenance Transaction
Nothing is displayed in the Product Version dropdown.
Kindly assist on how I can make the systems reappear
Regards

Check No system for selection

Maintenance Optimizer - Systems and Logical Components are not displayed

Hi Experts,
When I use the Maintenance Optimizer and select a product version, I do not get any Systems and the relevant Logical Component so that I can select one of those that are displayed. Did I miss any configuration settings or is there anything else that I need to do. Please give me the checklist that I need to look into before selecting a product version in the maintenance optimizer. Please help me out of this.
Thanks in advance,
Sagar.K

Hi,
Check this link... it has complete step by step configuration of Maintenance Optimizer...
https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
https://websmp208.sap-ag.de/solman-mopz --> SAP Tutor on Maintenance Optimizer
Award points if found useful

SAP ERP6 product version missing in SMSY for EHP4 upgrade Solman 7

Hello
I am trying to install Ehp 4 but when i try to create the new system as SAP ERP6 in solution manager (SMSY )but product version is missing ?
iam now stuck any ideas will be welcome as i need to get the stack.xml inorder to proceed with EHP installer

Hi,
Check below notes before proceeding with EHP download in solman,sap has recommaned to apply these notes when we tried to download EHP,
Must Implemeted
1238929 MOPZ: Solution Is Not Selected in Work Center
1240389 Maintenance optimizer transaction with incorrect Java host
1243197 MOPZ: Add Caption for Product and Stack of Stack Delta XML
1246549 Status were reset to step 1 after Download Basket approval
1247550 present all avaliable systems in mopz step 1
1250781 SMSY: Error for Java system components from the SLD
1255219 Java systems w/o ABAP instance in maintenance optimizer
1262239 SMSY: Database name *LOCAL
1273095 SMSY: Incorrect database server (Java)
1306173 Maintenance Optimizer: Enhancement Package Stacks
1308152 MOPZ: Check configuration for stack delta XML generation
1311841 Maintenance Optimizer: Rename stack delta index file
1319083 Maintenance Optimizer: Technical corrections
1326123 MOpz: Error "Update product data in Solution Manager"
1357565 MOpz: Maintain a system where EHP is installed
1402615 Translate hostname in Mopz to lower case
1407905 MOpz: Error when withdrawing in step 4
Cannot be implemented, but manual steps must be performed.
1141296 Solution Manager: ERP product data missing
1165587 Maintenance Optimizer: Enhancement Package stack selection
1277035 Solution Manager: EHP4 product data missing
Between what is your present stack level of solman
Regards
Uday

Product Version SAP ERP 6.0 Missing from solman 7.0

Hi All,
I have installed an ECC6 system and now i need to configure the solution manager and download the support packs
and xml file for EHP4 upgrade. I have done this before where in i configure the new system in SMSY as SAP ERP 6.0
and then configure maintenance optimizer and it gives me the option of Enhancement Package Installation.
However now in the current solution manager i dont see the product version SAP ERP 6.0 when im clicking
trying to creating a new system.
Our Solman version is 7.0 . I tried creating my new system under SAP ERP EHP as ehp version 1 and used maintenace
optimizer but it does not give me the option of EHP package installation. Can any one let me know how to address this
issue??
Regards,
Ershad Ahmed.

Hi,
Goto Tcode SMSY
1. Under Landscape Components --> Product Systems --> Select ERP --> Under that select your system ID and click on it,
Goto --> Header Data on your right side, change the Product Version to SAP ERP 6.0 and SAVE.
2. Goto System Groups and Logical Components --> Logical Components --> SAP ERP --> Create NEW Logical Component for your ECC system under this component and select Production version as SAP ERP 6.0 & assign ur system then SAVE.
3. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and REMOVE your ECC systen form the Solution and SAVE.
4. Goto System Groups and Logical Components --> Solution Landscapes-Operations --> Select your system landscape and ADD your ECC system form the Solution and SAVE.
Regards
Kannan.K

"Only assign one SAP NetWeaver product version to product system"

Greetings,
Somehow, after upgrading my PI system from NW 7.11 to NW 7.4, the SAP-XICONS component was left at the lower version. Everything else was upgraded and SUM didn't complain about this component. The component was present in the stack.xml file and the SCA was available. Yet somehow it was missed.
Now I am unable to use SUM to update the component. There seems to be no way to get the LMDB to reflect the actual versions of this system and have Maintenance Optimizer function.
After I assigned everything in the LMDB, the Verification Check says "Only assign one SAP NetWeaver product version to product system". And then MOPZ gives errors such as: "Wrong Netweaver product version found SAP NETWEAVER 7.4" and "Multiple Netweaver Product Version were found".
However, if I remove the assignment of 7.11, MOPZ is still unable to calculate the queue. It even gives the same errors.
How can I fix this? Is there some other way to generate the stack or get SUM to upgrade the component?

The root cause was MOPZ marking the component incorrectly in the stack XML.
The resolution was to use telnet to 5xx08 to manually deploy the SAP-XICONS archive.

System not available for selection in Maintenance Optimizer

Hello,
When planning the maintenance in MOPZ I choose product version and the system displays a list of systems assigned to the Product Version. However, the list only shows one of the two systems assigned to the logical component (prod system). I have looked at the logical component in SMSY listed under SAP ERP -> SAP ECC Server -> Z_SAP ERP and both systems are listed and are "green". A Consistency Check of the logical component shows no errors.
Any ideas are helpful, thank you.

Hello,
There is no 'display filter' on the screen you are referring to, Change Management -> Maintenance Optimizer -> Create New Maintenance Transaction. This is the initial screen of the maintenance transaction where it shows the 5 steps of the maintenance transaction. The following selectable fields are available:
Priority
Short Text
Product version
When I make a selection for the product version an additional selectable table is available where I can select the systems. I should be able to see all the systems assigned to the logical component, however I only see one of the two systems.
I have checked two other Solution Manager systems and there is no 'display filter' or 'hide filter' button either.
Regards,
Robert

Missing System under Product Version at Maintenance Optimizer

Similar Messages

Maybe you are looking for