MMS Message turn on off option not displaying

Hi,
I am a iPhone user for about 3-4 yrs now. I have a black 16 Gig iPhone 4 with the latest iOS 7.0.3. I rarely send MMS messages though but needed to send one yesterday only to realize that I can't do that. How did I realized this that I added a photo from my phone and then added the contact to which i wanted to send the msg. Upon clicking Send, i got the message "Cannot Send Message - MMS Messaging needs to be enabled to send this message". So then went to the settings thinking my MMS settings might have got turned off. Settings -> Messages and what I see is that under SMS/MMS -> MMS Messages -> On/Off -> This option is NOT AT ALL displayed there.
What I see on the screen is
1. iMessages (turn on/off is displayed)
2. Send Read Receipts
3. Send as SMS
4. Send & Receive
Then under SMS/MMS settings
5. Show Subject Field
6. Character Count
7. Blocked
That's all. No "MMS Messages On/Off" option displayef. Ideally it should be available before "Show Subject Field" option, isnt it?
Then I tried few settings but resulted in no benefit. I tried to reset network settings, tried to turn Wi-Fi on/off then turn 3G on/off, Carrier settings on/off. But nothing worked. Last option as suggested on the forum is to RESET as a new phone. But I dont want to lose my current app settings, especially all the game settings and statuses.
Please help here.
Regards,
Kiran

Hi,
Thanks for your quick reply to my post. I am currently in India and am on the Idea Cellular network. Well there does not seem to be any problem with my internet settings (both GPRS & 3G) because I use 3G internet with full speed and recently inquired and pushed the APN settings again for MMS. The mms on/off itself is not getting displayed in first place, forget turning it on or off.
Thanks for your response, waiting for a solution hat will work..
Regards,
Kiran

Similar Messages

Solaris 10 - Installation - Networked Option not display- RTL 8139 NIC Card

Hi,
when i installing Solaris, the Networkd (Yes/No) option not display. In my PC (x86) RTL 8139 Networkd Card is installed. Please advice, how can i enable Networked option and docs says that Solaris-10 Supports RTL 8139 Network card. (Ref: http://www.sun.com/software/solaris/self_help.jsp#installing )
Here pls refer "Network Devices (x86)" Section ).
Thanks

I'm not quite sureee, but you might want to run the SDDT test scripts...
http://www.sun.com/bigadmin/hcl/hcts/device_detect.jsp
This you can run from Windows, Linux on the same box, and it will list all the drivers for the hardware that solaris knows about. Inside the tool you can select, whether you want that list for Solaris 10 or SXDE...
Matthias
P.S.: I assume, the driver should be e1000g, but am not quite sure...

SEO Metadata options not display in admin panel issue.

SEO Metadata options not display in admin panel issue.

Hi there,
Not much information or detail there.
If the New meta option on pages is what you are refering to then the site in question is likely not been upgraded to that beta feature. Only partners who have access to beta options under settings can access that to upgrade.

MY LIST OF 'DEVICES' ON 'FINDER' HAS 'TURNED OFF' ( does not display list and does not show as bright) AND I CAN'T SEE MY LIST OF DEVICES (TO EJECT A DISK, OR ADD A FILE TO A DISK) ETC)??

my list of 'devices' on 'FINDER' has 'turned off. gone to not (bright ) does not display backup disks or I- pad etc. I can't see my list to eject a disk or copy a file to I-Pad etc???
Also how would I un-zip a file I have downloaded to "download" and then copy it to a disk??

Hold down OPTION COMMAND and click S
Regards,
Captfred

HT1766 A message popup tells me that my ipad has not backed up in two weeks. Now my ipad is locked and I cannot cancel the message, turn it off or slide to unlock. What do i do?

I have a pop up message on my IPad that says it has not backed up in two weeks and now my ipad is locked and I cannot use it. I connected it to electricity, it is already on Wifi, and locked it with the button on top. But the message has not gone away. I cannot turn it off or remove the message or or slide to unlock. What can I do?

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Photoshop Menus/Options not displaying correctly

I've just installed photoshop cs6 and many of the options are not displaying correctly. I've included two screenshots as examples.
I'm running Windows 7 64 bit and Nvidia GeForce GT330M graphics. I've updated the graphics driver to the latest version which made no difference.
Any help would be much appreciated as much of the functionality is currently off limits.

Either you have a bad install of Photoshop, or some other app/utility on your system is messing up basic UI drawing (Windowblinds used to do that).

Message in forms AS10g does not display message

We use the message command to display messages when debugging forms. In AS10g, the content of the message is not displayed. Has anyone found a workaround to this?
Thanks,
Jeff

The console window is set to the proper window. If I duplicate the line of code, it works... twice. I.E.
message('before commit');
message('before commit');
commit;
message('after');
message('after');
This works but you get two messages. Code it once and you get only an acknowledge button on not the text. I've also tried all combinations of the acknowledge option and using a pause after the message.

Turn Passcode Off Option Doesn't Show

I would sometimes like to be able to disable the passcode feature on my iTouch. My son has an iTouch and by looking at his and by reading online I should be able to go to Settings -> General -> Passcode Lock and see an option to turn it off. I see no such option. The first option on that panel is Change Passcode.
There is an option like that on my son's iTouch. What's the deal?

I have the same as your son's. All I can suggest is the standard restart and/or reset solutions. They can't hurt and they may help.
"If something is not working right, restarting or resetting iPod touch will likely solve the problem.
Restart iPod touch: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the Sleep/Wake until the Apple logo appears.
Reset iPod touch: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears."

Export Options not displaying in Object Style Options panel

Hi,
I'm trying to create an object style for decorative images as artefacts and set that style for export to PDF, but in the Object Style Options panel the Export Options settings (which I've seen before, bottom left of the panel) are not displayed. Can anyone tell me how I can make them visible? I'm on InDesign CS6.
Thanks, Ally

Hi changilainen2,
Yes, we are following Adobe Forum!!!
Thanks for your inputs. Actually while implementing this feature we were bit confused if it is of more importance to have these options in the Object Styles. That's why you are finding it missing from there.
But feedback from you and some other folks, made us realize that we should have it in object styles too.
Thanks we'll try incorporating this in the feature.
~Monica.

Writr off accounts not display in print document (ISU BILLING)

Hi all,
I got the problem with write off when a customer is changed to an indigent customer all their debt has to be written off which results their account to R: 0. The invoice does not pick up all write offs with regards to write off reason 11-Indigent accounts which cause a lot of invoicing errors.
Please give me advice
Thanks
Ashok

Thanks for your reply iam happy for that, i need some clarifications about this issue...
when am i invoicing particular this account the total amount of write- offs not display in the print documents.
Please advice me .
With Regards
Ashok

FIOS remote can turn TV off but not on? (Westinghouse LCD TV)

Westinghouse model CW26S3CW 26" LCD HDTV. Weirdest thing happening and that is I am able to get the FIOS remote to do everything but turn the TV on. I have contacted Westinghouse and they are saying to use the Sanyo or Samsung codes but they don't work. I have different types of FIOS remotes and have tried them all to no avail. I'm just dumbfounded how a FIOS remote can turn the TV off but not on.... Westinghouse must have some real whacked out technology that on and off are done differently. Anybody have a solution to this problem?

I'm having this problem, started about a week ago. I tried a factory reset and it did not help. I have model 46G300U1. Unplugging the TV is the only way that I know it will stay off.
TV will randomly turn itself back on. It does not always happen after a few seconds. For example, last night I turned off the TV and sat in the same room for a few minutes and it did not turn back on. However, when I checked this morning, it was back on.
I'm running the latest firmware.

IPhone 5 has lost sound and turning phone off has not solved problem

Can anyone suggest how this problem can be resolved? I do not have Apple Care. I have been turning phone off and then back on without success.
Thanks
MaryLou

Hi there,
I would recommens that you take a look at some of the troubleshooting steps in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Hope that helps,
Griff W.

Leave macbook on or turn it off when not using it?

any one please can you tell me is it better to leave my macbook on when not using it as I heard that it does some important updates at night time? or is it better to just turn it off and then reboot it when next going to use it. I use it pretty much every day and leave it on charge which is also my second question would it be better to leave my mac on charge but I have noticed the power adapter which is not on the extention cable but just on the small plug from the socket to the power cable

As to your second question, leave it plugged in most of the time if you can. Use it off AC power occasionally and calibrate once a month or so.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/9036.html

HT4623 Unable to find software update option not displaying in my ipad

Software update not displaying in ipad2.how to update the same.pls help

Go back to the article you asked this question from, ignore the instructions for updating it wirelessly, scroll down, and follow those for updating it from iTunes on a computer.
(93238)

Web composer option not displaying while Customizing Error Messages of Portal applications

Hi
I am trying to customize the error messages through web composer in sap portal but when i Choose System Administration → System Configuration → Knowledge Management → Content Management Web composer option is not shown . I am using netwearver 7.0
please guide me I searched google but couln't find any satisfactory answer.
Thanks

Hi Raima,
From your description I assume you are attempting to implement the steps outlined in the following documentation, is this correct -
Modifying Error Pages - Carrying Out the Initial Configuration - SAP Library
If you are navigating to the KM configuration through the steps you outlined and you do not see WPC Composer listed under 'Content Management' I would suspect that it is not deployed on your system (at least not successfully). It is not included as part of the default stack in EP 7.0 and must be deployed separately. If you do intent to deploy this component, you should also note that the SP level of the KMC-WPC SCA should match the SP level of the other KM and EP components.

MMS Message turn on off option not displaying

Similar Messages

Maybe you are looking for