Modes issue after nvidia 302.17 driver upgrade

I use a laptop with a nVidia GeForce 8400M GS video card.
Long time ago (290.xx drivers) I used to add custom modes (from modelines obtained with cvt) with xrandr.
Then I wasn't able to do that anymore and some display modes vanished from "xrandr -q" list, plus tty broke (but it's stated to be an upstream bug).
With 302.17 drivers I have only native mode:
$ xrandr
Screen 0: minimum 8 x 8, current 1440 x 900, maximum 8192 x 8192
VGA-0 disconnected (normal left inverted right x axis y axis)
TV-0 disconnected (normal left inverted right x axis y axis)
LVDS-0 connected 1440x900+0+0 (normal left inverted right x axis y axis) 367mm x 230mm
1440x900 59.9*+
DVI-I-0 disconnected (normal left inverted right x axis y axis)
when I try so set a custom mode i get:
$ cvt 1440 900 60
# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz
Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
$ xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
$ xrandr
Screen 0: minimum 8 x 8, current 1440 x 900, maximum 8192 x 8192
VGA-0 disconnected (normal left inverted right x axis y axis)
TV-0 disconnected (normal left inverted right x axis y axis)
LVDS-0 connected 1440x900+0+0 (normal left inverted right x axis y axis) 367mm x 230mm
1440x900 59.9*+
DVI-I-0 disconnected (normal left inverted right x axis y axis)
1440x900_60.00 (0x262) 106.5MHz
h: width 1440 start 1528 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 903 end 909 total 934 clock 59.9Hz
$ xrandr --addmode LVDS-0 "1440x900_60.00"
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 153 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 29
Current serial number in output stream: 30
Btw I already tried EDID override... (which resulted in a blank -black-, flickering screen no matter what custom modeline I put)
PS: I used 1440x900 to demonstrate that even if it's automatically set, it isn't recognized.

well, thanks, I actually didn't check the changelog...
I tried setting Metamodes (btw is usage that "simple" or I missed something?):
Option "MetaModes" "1440x900; 1280x800; 1152x720; 1024x640; 768x480; 576x360; 1024x768; 800x600; 640x480; 480x360"
but also that didn't work:
[ 4158.743] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 18:39:24 PDT 2012
[ 4158.743] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4158.747] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 4158.747] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4158.747] (==) NVIDIA(0): RGB weight 888
[ 4158.747] (==) NVIDIA(0): Default visual is TrueColor
[ 4158.747] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4158.747] (**) NVIDIA(0): Option "NoLogo"
[ 4158.747] (**) NVIDIA(0): Option "TripleBuffer"
[ 4158.747] (**) NVIDIA(0): Option "OnDemandVBlankInterrupts"
[ 4158.747] (**) NVIDIA(0): Option "MetaModes" "1440x900; 1280x800; 1152x720; 1024x640; 768x480; 576x360; 1024x768; 800x600; 640x480; 480x360"
[ 4158.747] (**) NVIDIA(0): Enabling 2D acceleration
[ 4160.423] (II) NVIDIA(GPU-0): Display (LPL (DFP-0)) does not support NVIDIA 3D Vision
[ 4160.424] (II) NVIDIA(GPU-0): stereo.
[ 4160.429] (II) NVIDIA(0): NVIDIA GPU GeForce 8400M GS (G86M) at PCI:1:0:0 (GPU-0)
[ 4160.429] (--) NVIDIA(0): Memory: 524288 kBytes
[ 4160.429] (--) NVIDIA(0): VideoBIOS: 60.86.51.00.42
[ 4160.429] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 4160.429] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 4160.433] (--) NVIDIA(0): Valid display device(s) on GeForce 8400M GS at PCI:1:0:0
[ 4160.433] (--) NVIDIA(0): CRT-0
[ 4160.433] (--) NVIDIA(0): TV-0
[ 4160.434] (--) NVIDIA(0): LPL (DFP-0) (connected)
[ 4160.434] (--) NVIDIA(0): DFP-1
[ 4160.434] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 4160.434] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 4160.434] (--) NVIDIA(0): TV encoder: (null)
[ 4160.434] (--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
[ 4160.434] (--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
[ 4160.434] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 4160.434] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 4160.434] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4160.434] (**) NVIDIA(0): device LPL (DFP-0) (Using EDID frequencies has been
[ 4160.434] (**) NVIDIA(0): enabled on all display devices.)
[ 4160.434] (WW) NVIDIA(0): No valid modes for "1280x800"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "1152x720"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "1024x640"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "768x480"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "576x360"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "1024x768"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "800x600"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "640x480"; removing.
[ 4160.435] (WW) NVIDIA(0): No valid modes for "480x360"; removing.
[ 4160.435] (II) NVIDIA(0): Validated modes:
[ 4160.435] (II) NVIDIA(0): "1440x900"
[ 4160.435] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 4160.439] (--) NVIDIA(0): DPI set to (98, 99); computed from "UseEdidDpi" X config
[ 4160.439] (--) NVIDIA(0): option
[ 4160.439] (--) Depth 24 pixmap format is 32 bpp
[ 4160.439] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 4160.455] (II) NVIDIA(0): Setting mode "1440x900"
[ 4160.734] (II) Loading extension NV-GLX
[ 4160.759] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 4160.759] (==) NVIDIA(0): Backing store disabled
[ 4160.759] (==) NVIDIA(0): Silken mouse enabled
[ 4160.760] (**) NVIDIA(0): DPMS enabled
I'll wait miracles on 304.xx drivers (:arr: if only nouveau was a little more fast... I play only a 11 years old 2D fighting game and with nouveau it doesn't reach 60fps)
Last edited by smilzoboboz (2012-06-20 09:56:37)

Similar Messages

Display issue after Nvidia update

After installing the newest driver (ver 340.52) for my graphics card (Nvidia GeForce GT 625) through the HP Support Assistant, my display has been altered. Everything has a blue/gray tint - it's as if the color red and green no longer exist!
Cables and monitor are fine; I tried a system restore; I rolled the driver back to version 337.88 - all with no change.
I'm running Windows 7 on an HP Pavilion 500-205t, Intel Core i5-4570, 64-bit.
Suggestions? Thanks!!
This question was solved.
View Solution.

Hi,
Avoid using adapters as they can and do fail.
Install the original NVIDIA driver that was posted for your PC.
If the above doesn't work then try the below suggestions:
Try the monitor and cable on another PC to eliminate those components as possible issues. Alternatively, try another known good monitor and known good cable.
Remove the video card and try the onboard video coming from the motherboard.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP Pavilion DV6 Sleep Mode Issue After Windows 10 Upgrade (Goes To Sleep After 2 Min Of Inactivity)

I recently upgraded my laptop from Windows 7 to Windows 10. The upgrade went smooth and everything appears to be running fine except for one anoying glitch. After approx. 2 min of inactivity my laptop atuomatically goes into sleep mode and logs me out. I have checked all my power settings/sleep settings/screen saver settings...etc and I have completed all the windows updates. I don't see any timers anywhere that require adjustment. Any help would be appreciated. Note: The laptop wakes up fine with no issues.

Hello Konacha, Thanks for posting on the HP Forums!I have read your thread regarding the computer entering sleep mode, upon Administrative prompts or a restart. There isn't a lot that could be done, but by the end of it, the issue should be resolved Hopefully, the simple fix is creating a new power plan. Your current power plan may be incorrectly configured. This Microsoft website can help with all the details of this task: Change, create, or delete a power plan (scheme) If that doesn't help, then personally, I would reinstall the operating system. This will fix it, as it will address any software conflict or virus that could be causing this. First, you should backup your data. I will provide information on how to do that: Backing Up Your Files (Windows 7) Once this is done, it is safe to do the System Recovery. Here is some information on how to do this: Performing an HP System Recovery (Windows 7) Please let me know if you have any other questions. Thanks again for posting, and have a great day! Mario

My ellipsis 7 has an issue after i got the latest upgrade...

my tablet turns itself off and reboots by itself, i did a factory reset of the tablet and it quit resetting itself for about a month, now it started back resetting itself has anyone had this issue it happened only after the upgrade.
on a side note when will the android 4.4.1 or 4.4.2 come out for this tablet maybe that will fix this thing

We'll unconver this mystery and get your tablet running smoothly again jcanderson252! Has there been any other changes to the device outside of the software? Try running the device in Safe Mode to see if an app is causing the trouble. http://vz.to/1i5MrJM
AshleyS_VZW
Follow us on Twitter @VZWSupport

Sleep mode issue after Mountain Lion

I am having an issue with the computer restarting after coming out of sleep mode. It does this after sleeping for a few hours. Below is the error code. Any help with what might be causing this would be greatly appreciated. Thanks!
Interval Since Last Panic Report: 96685 sec
Panics Since Last Report: 5
Anonymous UUID: BCC2B2AD-9DD8-4F84-B47B-9BA7440CC2D0
Wed Aug 8 08:31:00 2012
panic(cpu 2 caller 0xffffff800dcb7b95): Kernel trap at 0x000000040012b44e, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000000040012b44e, CR3: 0x000000000fea9000, CR4: 0x00000000000606e0
RAX: 0xffffff8028e7f400, RBX: 0xffffff80189a1c00, RCX: 0x7fffffffffffffff, RDX: 0x0000000000000100
RSP: 0xffffff8086ba3df8, RBP: 0xffffff8086ba3e40, RSI: 0xffffff801827f180, RDI: 0xffffff8028339d00
R8: 0x0000000000000049, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8028339d00, R13: 0xffffff80189a1c00, R14: 0xffffff8028339d00, R15: 0xffffff80189a1c00
RFL: 0x0000000000010286, RIP: 0x000000040012b44e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000040012b44e, Error code: 0x0000000000000010, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff8086ba3a90 : 0xffffff800dc1d5f6
0xffffff8086ba3b00 : 0xffffff800dcb7b95
0xffffff8086ba3cd0 : 0xffffff800dcce4ad
0xffffff8086ba3cf0 : 0x40012b44e
0xffffff8086ba3e40 : 0xffffff800e03b4ac
0xffffff8086ba3e60 : 0xffffff800e0364a8
0xffffff8086ba3eb0 : 0xffffff800e0401d4
0xffffff8086ba3ef0 : 0xffffff800e0402af
0xffffff8086ba3f30 : 0xffffff800e045b8a
0xffffff8086ba3f80 : 0xffffff800e045cb9
0xffffff8086ba3fb0 : 0xffffff800dcb2677
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x000000000da00000
Kernel text base: 0xffffff800dc00000
System model name: MacBookAir4,2 (Mac-742912EFDBEE19B3)
System uptime in nanoseconds: 31523577780770
last loaded kext at 17403178371576: jp.plentycom.driver.SteerMouse     4.1.4 (addr 0xffffff7f8f93a000, size 45056)
last unloaded kext at 17464555730602: jp.plentycom.driver.SteerMouse     4.1.4 (addr 0xffffff7f8f93a000, size 32768)
loaded kexts:
com.parallels.filesystems.prlufs     2010.12.28
com.parallels.kext.prl_vnic     7.0 15104.778994
com.parallels.kext.prl_netbridge     7.0 15104.778994
com.parallels.kext.prl_hid_hook     7.0 15104.778994
com.parallels.kext.prl_hypervisor     7.0 15104.778994
com.parallels.kext.prl_usb_connect     7.0 15104.778994
com.shapeservices.msm.driver.MSMFramebuffer     3.2.0
com.shapeservices.msm.driver.MSMVideoDevice     3.2.0
com.rim.driver.BlackBerryUSBDriverInt     0.0.68
com.apple.driver.AppleBluetoothMultitouch     75.15
com.apple.driver.AppleUSBEthernet     2.3.2
com.apple.filesystems.udf     2.3
com.apple.filesystems.smbfs     1.8
com.apple.driver.AudioAUUC     1.60
com.apple.driver.AppleHWSensor     1.9.5d0
com.apple.filesystems.autofs     3.0
com.apple.iokit.IOBluetoothSerialManager     4.0.9f8
com.apple.driver.AGPM     100.12.69
com.apple.driver.AppleMikeyHIDDriver     122
com.apple.driver.ApplePlatformEnabler     2.0.5d4
com.apple.driver.AppleHDA     2.3.0f2
com.apple.driver.AppleUpstreamUserClient     3.5.10
com.apple.iokit.IOUserEthernet     1.0.0d1
com.apple.driver.AppleLPC     1.6.0
com.apple.driver.AppleIntelHD3000Graphics     8.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBT ransport     4.0.9f8
com.apple.driver.AppleMikeyDriver     2.3.0f2
com.apple.Dont_Steal_Mac_OS_X     7.0.0
com.apple.driver.AppleSMCLMU     2.0.2d0
com.apple.driver.ApplePolicyControl     3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin     1.0.0
com.apple.driver.AppleBacklight     170.2.3
com.apple.driver.AppleMCCSControl     1.0.33
com.apple.driver.AppleIntelSNBGraphicsFB     8.0.0
com.apple.driver.AppleSMCPDRC     1.0.0
com.apple.driver.AppleUSBTCButtons     235.4
com.apple.driver.AppleUSBTCKeyboard     235.4
com.apple.driver.AppleUSBCardReader     3.1.0
com.apple.AppleFSCompression.AppleFSCompressionTyp eDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTyp eZlib     1.0.0d1
com.apple.BootCache     34
com.apple.driver.XsanFilter     404
com.apple.iokit.IOAHCIBlockStorage     2.2.0
com.apple.driver.AppleUSBHub     5.1.6
com.apple.driver.AirPort.Brcm4331     600.15.20
com.apple.driver.AppleAHCIPort     2.4.0
com.apple.driver.AppleUSBEHCI     5.1.5
com.apple.driver.AppleEFINVRAM     1.6.1
com.apple.driver.AppleRTC     1.5
com.apple.driver.AppleSmartBatteryManager     161.0.0
com.apple.driver.AppleACPIButtons     1.6
com.apple.driver.AppleHPET     1.7
com.apple.driver.AppleSMBIOS     1.9
com.apple.driver.AppleACPIEC     1.6
com.apple.driver.AppleAPIC     1.6
com.apple.driver.AppleIntelCPUPowerManagementClien t     196.0.0
com.apple.nke.applicationfirewall     4.0.39
com.apple.security.quarantine     2
com.apple.driver.AppleIntelCPUPowerManagement     196.0.0
com.apple.driver.AppleMultitouchDriver     235.27
Model: MacBookAir4,2, BootROM MBA41.0077.B0F, 2 processors, Intel Core i5, 1.7 GHz, 4 GB, SMC 1.73f65
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.98.81.20)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: OWC Mercury Aura Pro Express 6G SSD, 240.06 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x024c, 0xfa120000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821f, 0xfa113000 / 6
USB Device: FaceTime Camera (Built-in), apple_vendor_id, 0x850a, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8404, 0xfd110000 / 3

I have the same issue with a MBP from mid 2011 and 500GB SSD drive.
Thought maybe it was caused by dropbox, google drive, twitter, clocks or logmein, but even after clsoing all of these and putting it to sleep it still happens.
Found this on another site so please let me know if this is useful. I haven't tried any of this but will soon.
http://displaylink.org/forum/showthread.php?t=1814

Reporting authorization issue after BI 701 05 EHP1 upgrade

Hello,
We have recently upgraded our BI 7.0 to BI 701 EHP1 with 05 patch level. After this we had a problem with reporting authorizations for a report (query), which has created under Virtual Infoprovider.
Earlier the report use to be execute perfectly with authorizations S_RS_ICUBE object with Act 03, Subobject DATA, but after upgrade to EHP1, while executing report its throwing a error pasted below.
=============================================================================================
"Diagnosis
Errors occured while reading a VirtualProvider outside the BI system. Check whether the previous error messages contains any information about the possible cause of this error.
It is possible that the error message can not be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error class in the source system of the VirtualProvider.
System Response
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occure with the connection to the system; these can lead to system termination. If the code for the VirtualProvider is not from the SAP, contact the relevant person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors."
===============================================================================================
After running st01 trace we identified the missing authorization is S_RS_ICUBE with Act 03, subobject DEFINATION.
Here please tell why is the subobject check is performed to execute a report (query), as this is happening after EHP1 upgrade, so let me know if anyone had any clue on this ...
Thanks

Hi Martin,
Thanks for reply.
The assumption what you made are correct, but these are the possible reasons only. Is there any specific note or any info from sap that these changes came due to the new release change, so that i can tell my manager clearly.
And I am not sure whether this is impacting the reports which using the VirtualProviders (Virtual CUBE) in place. If you could get bit more information that will be helpful...Thanks in advance.
Sridhar

Mta - poa communcation issues after 8.0.1 hp1 upgrade

Hello,
Upgraded to 8.0.1 hp1 about a month ago, and since doing so have had to reboot the server twice (about every 2 weeks) to restore mta - poa communications.
Small GroupWise system, all components (poa, mta, gwia and webacc) on the same physical server, running NetWare 6.5 sp8... no problem before upgrade.
Basically, looking at the mta and poa logs you can see that they simply can't speak with one another. As I said, things run fine for a couple of weeks, then over the course of a day the system will begin to fail and eventually need a reboot (this leads me to believe this is NOT a simple configuration issue).
Here are the logs for both the poa and mta before my last reboot:
---------- 0615POA.001
00:48:29 02A MTP: ndsudom: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7100
00:48:29 02A MTP: Unable to connect to send: link blocked [8908]
01:20:00 02A MTP: ndsudom: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7100
01:20:00 02A MTP: Unable to connect to send: link blocked [8908]
04:33:35 028 MTP: ndsudom: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7100
04:33:35 028 MTP: Unable to connect to send: link blocked [8908]
06:32:56 02C MTP: ndsudom: Unable to open connection [8912]. Address = xxx.xxx.xxx.163, Port = 7100
06:32:56 02C MTP: Unable to connect to send: link blocked [8912]
07:01:15 02C MTP: ndsudom: Unable to open connection [8911]. Address = xxx.xxx.xxx.163, Port = 7100
07:01:15 02C MTP: Unable to connect to send: link blocked [8911]
07:01:38 04E MTP: ndsudom: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7100
07:01:38 04E MTP: Unable to connect to send: link blocked [8908]
07:47:06 056 MTP: ndsudom: Unable to open connection [890F]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:06 056 MTP: Unable to connect to send: link blocked [890F]
07:47:06 028 MTP: ndsudom: Unable to open connection [890F]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:06 028 MTP: Unable to connect to send: link blocked [890F]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 056 MTP: Unable to connect to send: link blocked [8925]
07:47:07 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:07 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:12 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:12 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:17 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:17 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:22 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:22 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:28 056 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
07:47:28 028 MTP: ndsudom: Unable to open connection [8925]. Address = xxx.xxx.xxx.163, Port = 7100
---------- 0615MTA.001
00:26:11 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
00:26:28 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
00:32:52 017 MTP: ndsupo-ipS0: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
00:33:08 041 MTP: ndsupo-ipS1: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
01:27:58 017 MTP: ndsupo-ipS0: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
01:29:05 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:22:06 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:22:11 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:24:16 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:25:18 043 MTP: ndsupo-ipS2: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
02:38:14 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:50:04 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
02:50:21 045 MTP: ndsupo-ipS3: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
02:52:12 017 MTP: ndsupo-ipS0: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
04:34:24 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
04:40:21 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
04:40:26 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
05:54:03 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
06:28:08 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:01:11 045 MTP: ndsupo-ipS3: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:01:11 041 MTP: ndsupo-ipS1: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:01:16 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:01:40 045 MTP: ndsupo-ipS3: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
07:22:20 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:22:21 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:22:23 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:22:25 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:30:48 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:30:58 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:34:20 043 MTP: ndsupo-ipS2: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:34:22 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:34:55 017 MTP: ndsupo-ipS0: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
07:39:15 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:39:17 043 MTP: ndsupo-ipS2: Unable to open connection 0x8911. Address = xxx.xxx.xxx.163, Port = 7101
07:40:34 017 MTP: ndsupo-ipS0: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
07:41:48 045 MTP: ndsupo-ipS3: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:42:52 017 MTP: ndsupo-ipS0: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:43:33 041 MTP: ndsupo-ipS1: Unable to open connection, no response. Address = xxx.xxx.xxx.163, Port = 7101
07:44:22 045 MTP: ndsupo-ipS3: Unable to open connection 0x8912. Address = xxx.xxx.xxx.163, Port = 7101
My best guess at this point is to perform a top down rebuild of the databases to correct the issue.... has anyone experienced a similar issue?
Thanks,
Gary

Looking at the webacc logs I also see GWDVA errors. It is also complaining about not being able to talk, so this does not appear to be just a MTA/POA issue.
Gary
---------- 0615WEB.001
06-15-10 00:00:43 Error: GWDVA is down- document viewing unavailable
06-15-10 00:02:12 Error: GWDVA is down- document viewing unavailable
06-15-10 00:03:14 Error: GWDVA is down- document viewing unavailable
06-15-10 00:10:59 Error: GWDVA is down- document viewing unavailable
06-15-10 00:23:43 Error: GWDVA is down- document viewing unavailable
06-15-10 00:25:59 Error: GWDVA is down- document viewing unavailable
06-15-10 00:39:03 Error: GWDVA is down- document viewing unavailable
06-15-10 00:45:26 Error: GWDVA is down- document viewing unavailable
06-15-10 01:17:06 Error: GWDVA is down- document viewing unavailable
06-15-10 01:47:51 Error: GWDVA is down- document viewing unavailable
06-15-10 01:50:10 Error: GWDVA is down- document viewing unavailable
06-15-10 01:55:52 Error: GWDVA is down- document viewing unavailable
06-15-10 01:59:49 Error: GWDVA is down- document viewing unavailable
06-15-10 02:22:24 Error: GWDVA is down- document viewing unavailable
06-15-10 02:23:12 Error: GWDVA is down- document viewing unavailable
06-15-10 02:24:01 Error: GWDVA is down- document viewing unavailable
06-15-10 02:25:44 Error: GWDVA is down- document viewing unavailable
06-15-10 02:47:14 Error: GWDVA is down- document viewing unavailable
06-15-10 02:53:45 Error: GWDVA is down- document viewing unavailable
06-15-10 04:32:57 Error: GWDVA is down- document viewing unavailable
06-15-10 04:34:37 Error: GWDVA is down- document viewing unavailable
06-15-10 04:38:59 Error: GWDVA is down- document viewing unavailable
06-15-10 04:40:02 Error: GWDVA is down- document viewing unavailable
06-15-10 05:09:33 Error: GWDVA is down- document viewing unavailable
06-15-10 05:17:18 Error: GWDVA is down- document viewing unavailable
06-15-10 05:43:51 Error: GWDVA is down- document viewing unavailable
06-15-10 06:06:04 Error: GWDVA is down- document viewing unavailable
06-15-10 06:08:01 Error: GWDVA is down- document viewing unavailable
06-15-10 06:28:20 Error: GWDVA is down- document viewing unavailable
06-15-10 06:29:49 Error: GWDVA is down- document viewing unavailable
06-15-10 07:17:38 Error: GWDVA is down- document viewing unavailable
06-15-10 07:28:18 Error: GWDVA is down- document viewing unavailable
06-15-10 07:30:45 Error: GWDVA is down- document viewing unavailable
06-15-10 07:32:46 Error: GWDVA is down- document viewing unavailable
06-15-10 07:43:54 Error: GWDVA is down- document viewing unavailable
06-15-10 07:45:23 Error: GWDVA is down- document viewing unavailable

**Issues after OS 10.6.6 upgrade**

Hi,
Hopefully I'm in the right place!
Spec: Macbook 2006, 2GB RAM, 320gb HD, OS 10.6.6, Boot Camp (Win 7)
2 problems:
1) After the update to OS 10.6.6 and the purchase of Iphoto 11 from the App store, I have been unable to open Iphoto, unless I unmount the boot camp partition. I have tuxera NTFS installed, which allows me to mount the Windows 7 parition on OSX. I've tried to uninstall this from system preferences, but have struggled to get the website uninstall instructions to work. Is there a way I can stop the Windows partition mounting through the OS? Or is there another fix to this annoying iphoto issue.
ps. I've done a bit of research, and found info about removing the windows partition from spotlight search, but this hasn't worked.
2) Ever since 10.6.6 update, time machine hasn't worked. It either says 'calculating changes' for hours or it starts to exclude 1000's of items from the backup. I've tried a full reset of time machine, but that doesn't work.
Thankyou for any information
Fraser

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

File permission issues after copying from hard drive

Hi there,
I've copied my Sites folder (containing lots of HTML, CSS, PHP files) from a Time Machine backup that lives on an external hard drive onto my new MacBook Air running Lion.
Now, I can't edit any of the files. Here are the errors I'm getting:
http://d.pr/1jlu
I've already tried the following system/preference changes:
Make sure the Time Machine "2 week lock" is disabled
Make sure the folder (and subfolders) are not locked via "get info"
Make sure I have read/write permissions for the folder/files
See:
http://d.pr/Iiee
I'm going crazy! Nothing seems to help? What else can I try to get back permission to edit my own files? (Not very familiar with Terminal unfortunately).
Help please!
Kai

Puck84 wrote:
So my hard disk crashed and when I installed the new one I tried using the setup program to restore my mac settings from my Time Machine backup. But for some reason the process continued to freeze halfway.
That sounds like something's corrupted on your backups. Try to repair them, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
If that finds and fixes errors, your best bet will be to do a full system restore, per #14 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum). That will bring everything back, just as it was, permissions and all.
If that doesn't work, the problem with your HD may have damaged your installation of OSX and/or some of your data, which Time Machine backed-up. So try it again, but choose an earlier backup, from before all the trouble started.

Satellite P870 - WiFi issues after Win 8.1 upgrade

Internet through wireless is hopeless.
Maybe 3 in 10 pages will load correctly or not at all, mostly not at all.
Other wireless devices in the house are fine, as is using the Ethernet .
Checked the drivers through the device manager, says they are up to date.
However using the toshiba service station it lists 12 updates including one for the Realtek wireless driver.
The date of release definitely after the current installed version.
Trying to update through the service centre it completes and then comes up with an error message, something like process ended by the user.
Of course I never ended anything.
Any ideas/thoughts? Just uninstall 8.1?
Though I would rather not.

Hi
Did you follow the Win 8.1 installation instruction?
The Win 8.1 drivers should be installed in the right order!
I found this info on the Toshiba EU driver page;
1 Intel Wireless Display -> Uninstall
2 Windows 8.1 update -> Install
3 TOSHIBA Desktop Assist-> Upgrade
4 Intel Display Driver -> Upgrade
5 NVIDIA Display Driver -> Upgrade
6 Intel Rapid Storage Technology Driver -> Upgrade
7 NVIDIA HD Audio Driver -> Upgrade
8 Atheros Wireless LAN Driver -> Upgrade
9 Realtek Wireless LAN Driver -> Upgrade
10 Realtek Bluetooth Filter Driver Package -> Upgrade
11 TOSHIBA System Driver -> Upgrade
12 TOSHIBA Function Key -> Upgrade
13 TOSHIBA eco Utility v2 -> Upgrade
14 TOSHIBA PC Health Monitor -> Upgrade
15 TOSHIBA Fingerprint Utility -> Upgrade
16 TFPU WBF Delete Fingerprint Tool -> Upgrade
17 TOSHIBA HDD Protection -> Upgrade
18 TOSHIBA VIDEO PLAYER -> Upgrade
19 TOSHIBA Blu-ray Disc Player -> Upgrade
20 ArcSoft TV5.0 -> Upgrade
21 TOSHIBA Resolution+ Plug-in for Windows Media Player -> Upgrade
22 CyberLink MediaShow 6 for TOSHIBA -> Upgrade
23 TOSHIBA Media Player by sMedio TrueLink+ -> Upgrade
24 TOSHIBA Service Station -> Upgrade

Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

[SOLVED] Problems autostarting xbmc after nvidia upgrade

Hello!
With nvidia version 302.17-1 and with 302.17.2 xorg errors and fails when autostarting xbmc.:
Here is my Xorg.0.log: https://gist.github.com/3118969
Here is my xorg.conf:
https://gist.github.com/3118996
But downgrading nvidia and nvidia-utils to version 295.59 makes everything work again.
So is this considered as a bug or can I change my configuration to make it work with latest nvidia drivers?
My graphics card is PCI and not PCIe, maybe there is some problem with old PCI cards?
I am now using standard xbmc package in repositories (earlier I used xbmc-pvr-git but I changed to standard xbmc to see if it was a problem even without using AUR packages).
Last edited by ronnylov (2012-07-17 14:04:32)

Thanks. But I got another problem now because I can't upgrade from nvidia 295.59 to the latest version. There is some kind of dependency problem, probably because of the switch from /lib to /usr/lib.
[ronny@htpc ~]$ sudo pacman -Syu
Lösenord:
:: Synkroniserar paketdatabasen...
core är senaste versionen
extra är senaste versionen
community är senaste versionen
:: Påbörjar full systemuppgradering...
löser beroenden...
letar efter inre konflikter...
Mål (3): cairo-1.12.2-2 nvidia-302.17-2 nvidia-utils-302.17-1
Total Installationsstorlek: 54,02 MiB
Nettouppgraderingsstorlek: 0,69 MiB
Fortsätt med installation? [Y/n]
(3/3) kontrollerar paketintegritet [######################] 100%
(3/3) laddar paketfiler [######################] 100%
(3/3) kontrollerar filkonflikter [######################] 100%
fel: misslyckades att påbörja överföringen (motstridiga filer )
nvidia: /usr/lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz existerar i filsystemet
Fel uppstod, inga paket uppgraderades.
[ronny@htpc ~]$
Trying to following the info here https://wiki.archlinux.org/index.php/De … iki:usrlib:
[ronny@htpc ~]$ grep '^lib/' /var/lib/pacman/local/*/files
/var/lib/pacman/local/nvidia-295.59-1/files:lib/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/extramodules-3.4-ARCH/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz
OK the old package installed files in the wrong place when I downgraded nvidia after the update to /usr/lib.
These packages need rebuilding so as not to include the /lib directory. They can also simply be uninstalled and reinstalled again after upgrading glibc.
So I try to uninstall nvidia and nvidia-utils:
[ronny@htpc ~]$ sudo pacman -Rs nvidia nvidia-utils
Lösenord:
kontrollerar beroenden...
fel: misslyckades att förbereda överföring (kunde inte tillfredställa beroenden)
:: libva: behöver libgl
:: mesa: behöver libgl
:: mplayer: behöver libgl
:: xorg-xdriinfo: behöver libgl
OK then uninstall these packages as well...
[ronny@htpc ~]$ sudo pacman -Rs nvidia nvidia-utils libva mesa mplayer xorg-xdriinfo
kontrollerar beroenden...
fel: misslyckades att förbereda överföring (kunde inte tillfredställa beroenden)
:: ffmpeg: behöver libva
:: freeglut: behöver mesa
:: glew: behöver mesa
:: gnome-mplayer: behöver mplayer
:: vdpau-video: behöver libva
:: xbmc: behöver libva
:: xorg-utils: behöver xorg-xdriinfo
and I get even more dependency problems.. I am a little bit new on this but do I need to reinstall almost everything just to uninstall a video driver? I just want to replace the old driver with the new one...
I think I need a hint of how to solve my problem. Perhaps this thread belongs somewhere else in the forum?
Last edited by ronnylov (2012-07-17 11:01:31)

Mac OSX has loads of issues after upgrade

I upgraded my OSX to mountain lion 10.8.3, and after 2 days it is completely crippled. I will try to describe my problem as there are loads of symptoms.
My Activity monitor shows UserEventAgent, SystemUIServer, and loginwindow eating 2GB of memory each. Plus I installed a new App called Onyx to try to resolve issue, and even that app is not working eating 3gb of RAM. My mac is crippled, every app just crashes, I can't even successfully shut it down because it so overloaded. Oh, and the worst part, the Upgrade ruined my Time Machine Backup, because after upgrade it started backing up and crashed in the middle of it showing black screen of death.
The best (or worst) part of this horror story is, is that I tried reinstalling my OSX by doing Cmd-R. Everything went smoothly to a point where I choose the HD to install to, and it only listed a recovery drive, the main drive wasn't even on the list. What this means, is that I'm deep in the water, and I have no idea how to bring my mac back to healthy state.

I have not done so for /private/var/run/StartupItems because I don't know how to get there.
You can't get there, because no such folder exists or ever has existed on any computer.
If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Driver update for Win 7 USB issue on nVidia chipset systems now available

This patch is needed for the TouchSmart 600 AIO Desktop series if you haven't installed it.
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...

The update is not part of the desktop Win7 update disc from MS or HP - Microsoft has not yet integrated it into Win7, and it is not yet available on Windows Update (it is likely to hit there sometime in January). It was available too late to get it out on HP Update before the holiday break. I don't believe there have been any rolls to the Win7 upgrade disks. I do recommend (while still on Vista) running HP Update and installing all applicable updates - PRIOR to doing the Win7 upgrade. Also - I'd double check the drivers page for your system for any Vista updates as well, best to do any driver/BIOS/Video BIOS updates prior to the Win7 upgrade process. I know that some of them were created before Windows 7 was out - and may not want to install if it sees the newer OS.
As to the fix - this could manifest itself in many ways - but essentially - this resolves system flakyness with USB devices attached . Some internal devices (card readers, touchscreens, some Wireless LAN interfaces) connect via USB - so they could be affected, even if you haven't hooked up anything to your system externally.
Not sure just what problems you were experiencing, so can't say this was the cause (and will be the fix) - but if it applies to your system - I'd definitely give it a shot. I checked a couple of systems that had this update - I see it now on the software drivers and update page for them, so it looks like it rolled out OK.
Happy Holidays...
-DM (an HP employee, but the time and comments here are my own, not my employers)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

Modes issue after nvidia 302.17 driver upgrade

Similar Messages

Maybe you are looking for