Monitor System Process

How can I monitor the current processes running on the OS. I want to get the process name as well as the executable file.

PsTools
http://www.sysinternals.com/ntw2k/freeware/pstools.shtml

Similar Messages

How to make an attendance monitoring system

Hello there, I've just made a system that allows records the time in and time out of the some people. But how do you track people that didn't even check in at all? How do you know if there's a person that was supposed to be present, but didn't come and check in?
What's the process in doing that when using java as the programming language?

Let me elaborate on the question further. Bear in mind that this is my first attempt in making an attendance monitoring system and I feel that it has more details and processes than what it seems to be.
What I'd like to learn are the details, such as the checks and processes that are incorporated in making an attendance monitoring system; processes or methods that allows the system to show valid information. Such as a check to prevent the person from logging in twice instead of logging in and out. Also what is the process that must be done once there is a scenario of when a person is unable to log out or forgets to log out.
Regarding the helpful answer that it would depend on the company or the user. Thank you for that answer. But it isn't really the answer I was looking for. The attendance monitoring system is said to be an Information system. And just like many information systems it is supposed to give out factual information. What I'd like to know is the generic information that can be computed from the data that the system is able to collect, capabilities that are not only found in specific attendance monitoring systems of a single company but present in most if not all the best attendance monitoring systems. Such as possibly finding the trends for absences, tardiness depending on the season etc.
This is my first time making such as a system, so if their is anything I haven't understood, I ask for your patience. Thank you for the answers that you people have given.

Unable to see system process request page, process monitor page

Hi all,
We refreshed our test instance with prod recently. sysaudit and ddd audits were clean except for the following entries in sysaudit which i thought wasnt of much significance here.
SEC-30) Role User table (ROLEXLATOPR) should be populated when new User Profiles (entries in PSOPRDEFN) are created
sing User Profile component through PIA. The following User Profiles need to be fixed by simply opening and saving
hem through PIA:
per ID     Description
OPP_PORTALADM     Common Portal Administrator
OPP_PORTALMGR     Common Portal Manager
OPP_USER     Common Portal User
3 Total Rows
On logging to the superuser VP1, am not able to see many pages, such as system process request, process monitor and also do not have access to user profile page.
The upgcount was matched with prod instance and didnt find any issues there. For the same profile in prod, the user has access to all the above mentioned pages. In the cloned copy, no user has access to these pages.
We checked the permission lists and roles attached. They are all in place as the same user is able to access the pages in prod instance.
Could it be webprofile issue. We tried clearing the webserver and appserver cache and bouncing them. the webserver in use is websphere and OS is AIX.
Appreciate any valuble feedback i can get on this.
Thanks

Here's just a thought.
Do you know if it is a security problem or a portal problem? I mean is the issue just that the links for Process Monitor, etc. don't show up in the menu, or does it give you a not authorized message?
Here's the thought:
Try to hit these links by pasting them into your browser:
http://localhost:80/psp/HR90DMO/EMPLOYEE/HRMS/c/PROCESS_SCHEDULER.PRCSMULTI.GBL
http://localhost:80/psp/HR90DMO/EMPLOYEE/HRMS/c/PROCESSMONITOR.PROCESSMONITOR.GBL
Make sure that you change:
- "localhost" for your servername
- "80" for your port
- "HR90DMO" for your weblogic domain name
If you can see the page, we need to look at your portal setup or portal security, maybe run Portal Security Sync. If you get an error message, can you post that message, and maybe we need to check the main security setup, etc.
Hope that helps at least get a little further toward a solution.

Process does I/O, shows up on Disk Activity within Resource Monitor as System process

I've written some software that performs a significant amount of file I/O. What is odd is that on Resource Monitor, I see the large amount of I/O being read/written to the files my process is writing --- except the process that is indicated under
Disk Activity is the System process, not my process. My code is standard C++ (no direct calls to the Windows API), console mode. Can anyone explain why this occurs? Is this some artifact of console mode programs that I am stuck with? Thanks.

Hi all, am intending to do some editing on me and my gf's pictures, and I need to assure her that it's not going to go onto the internet (she's extremely private).
You could do whatever you need to do in Lightroom with the Internet unplugged, then your questions are moot

In 26.0, how do I put Download, Bookmarks, History, and Tags into separate windows? I have multi-monitor system and place these different windows . . .

Hello,
I recently, decided to upgrade from 19.0b to the current (26.0) version, as "Tab Utilities" now supports 26, but am finding one of the visual changes counter productive. My two workstations have multiple monitors. One has 2 monitors (2560x1600) and the other one has 4 monitors (2560x1600). On both workstations, I'll place the various Firefox informational windows off the "main monitor" (the one directly in front of me). This way they're available to me at a glance.
(Side note: I refer to my monitors, as 2L, 1 2R and the 4th as "auxiliary.") The one thing I miss most is being able size these Firefox windows independently and in different positions.
I mean I'm used to seeing "Download" on monitor 2R on the right side (1/8 of screen) behind Microsoft Process Explorer's System Information. While the History will be on monitor 2L on the right side at 1/4 of the screen). I'm used to glancing out my right eye at the downloads and when needing something from the past, it's right next to the main monitor #1. This way I can access history quickly.
I can see why a developer (with one monitor say 1920 x 1080) would love seeing one window, but why can't Firefox support both single and multiple monitor users at the same?
Anyway, is there a way to get 26.0 to place at least "Download" and "History" in separate sizable windows?
(I'm not jumping up and down to go back to 19.0b or to try 25, but would like to stay current.)

Hello,
Thank you for your very quick reply. Before I read your reply completely, let me see if I can answer your first concern.
> Maybe I am missing your point.
Maybe I'm not making the point properly. Honestly, I never explained the issue from how it is directly affecting me.
OK, let's do a real world example of what I'm seeing on my two monitor system. I'll first describe what I experienced with 19.0b and earlier, which is IMHO how it should work in 26 and beyond ('''''as an option'''''). Next, I'll review what I'm seeing in 26.0. Hopefully this will help you understand what changed, from a practical perspective.
In 19.0b (and how I like working) for a multiple monitor system:
On the main monitor, I'm running Firefox. It is 1920 x 1080 and is in the lower right hand corner.
On the the monitor to my right (2R), I have the Download Manager list of downloading and downloaded file. It is in the upper right hand corner and takes up about 300 x 1500 pixels.
For a two monitor system, I have the History List running beside Firefox in the lower right hand corner and it is 600 x 1080.
For a three (plus) monitor system, I have the History List running on my left (2L) monitor. It is in the lower right hand corner and is 600 x 1080 pixels big.
For 26.0: I'm seeing the following:
On the main monitor, I'm running Firefox. It is 1920 x 1080 and is in the lower right hand corner. (This is the SAME as with 19.0b.)
When I start the Download Manager and have it set up as I do for 19.0b, it looks OK. It is on monitor 2R and is 450 x 1500 pixels (because of the new navigation side bar).
'''''The problem STARTS NOW (when I start the History List).'''''
When starting the History List, it replaces the Download Manger on the 2R monitor in the 450 x 1500 pixel window. This doesn't work for me because:
1) It is too far away to see. (NOTE: I put it on the 2L monitor in the lower right hand corner. so I can see it easier for the 3+ monitor. In the case of the 2 monitor, I put it beside Firefox again to see it easier.)
Some might ask, but the Download Manager is on the 2R and right side, why can't the History List be there too? Good question, and I can only reply saying:
1) Personal choice.
2) The Download Manager is NOT as busy as the History List and I find it easy to read.
3) The History List is a lot busier and the font size looks to be smaller (might be the same, but it looks smaller to my eyes). I need it closer to me / Firefox.
What I'm saying is this . . . The Download Manager and History List have <ul>''valid reasons to be visible to the user at the same time''.</ul> They also need to be independent of one another for (at least) size and location.
Combining them together is OK for some people, but NOT for everyone. Please make it an option to combine (as in 26) and separate (25 and earlier).
I'm not sure this is the best way to put it, but here goes. Allow users to collapse or expand these various lists by using multiple windows. One window is the collapse view and multiple independent windows is the expand view.
I'll read and comment on the rest of your reply, soon. Thanks for allowing me hopefully to explain my point in a better manner. :-)

Monitoring BI PROCESS CHAIN with Solution Manager BPMON

Hello,
I'm trying to setup the monitoring of BI process chain using the BPMON
I setup the process chain monitoring using BPmon application monitoring "BI Process Chain Monitoring" (BOBIPCMO)
but than I'm not able to read the process chain names,steps,and variant from satellite system
On other systems,using different application monitor (like PI MONITOR) is working fine
i'm using the latest plug-in ST-A/PI 01L_BCO700 on entire landscape
My bi system is 7.01 EHP1 sp4
solution Manager is 7.01 EHP1 SP20
Any suggestiions?
Thanks
Marco

Hello Marco,
the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
Sorry for any inconvenience caused.
If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
Best Regards
Volker

Idoc (monitoring system BSM)

Hello All,
In the process, to check if communication between SAP and WMS is operational (IDoc) we create a mail, if idoc is not ok.
We would like to connect a failure to a monitoring system BSM by sending and event.
is this possible from an ABAP program? If so, How?
Good answers will be appreciated.
Thanks in advance.
Regards
Sasidhar Reddy Matli.

Hi Vishal,
Please check and implement below notes to fix the first issue:
1570282 - Advance Corr. BPMon ST-A/PI 01N
1946940 - ST-A/PI 01Q SP2: Advance Correction BPMon (Infrastructure and
EBO)
1869678 - Advanced Corrections for BPmon/Analytics Delivered with 01Q SP1
(framework)
Thanks
Vikram

System Process Running out of Control - Overheating!

The other day I arrived home and went to check my e mail and found my computer running at full tilt with the fans going all out and the case quite hot.  I thought maybe I had left dashboard open all day as I have done this before with similar results, but this was not the case.
I quit all programs and re started and the computer started to run at close to full process.
I ran software update and installed the RAW and system update that was available, re started still there.  I ran disk utility to check/repair permissions until they were good.
I ran the onyx cleaning set of stuff that clears cashes and histories.
When looking at the process monitor it shows the processor running at close to 3/4 but even with programs open in the background it shows them using little to none as expected with the process monitor on top of the list using some processor, but the little color chart below that shows process separated by programs and system show the system process running quite high.
Lastly I noted that when I restart and then let the computer sit for a few minutes at the log in screen  the system must be running hard again because the fans come on.  I do not know what is causing this or what next step I should take to remediate it, please help!
Jerome

Hi, C Jerome. If your Powerbook were actually overheating, it would put itself to sleep, so you needn't worry that it's in danger of damaging itself. I can understand your interest in calming and quieting it, though.
First, how full is your hard drive? At least 10% of its capacity or 5GB, whichever is larger, should be free at all times. If you get down to much less than that, the processor and hard drive must work very hard cycling data in and out of virtual memory, and you run a substantial risk of system crashes, hard drive directory corruption and consequent loss of data.
Do you have disk indexing turned on? Indexing your drive is only useful if you use Find By Content searches (I'm not sure that's what Spotlight calls them, because I don't use Tiger). Indexing can consume an enormous amount of processor cycles and generate a lot of heat, in addition to taking up a significant amount of hard drive space. If you don't need it, turn it off.

UDP PORT 445 Not listed in System Process

Hi! Can you help me? I need the UDP PORT 445 listed on SYSTEM Process.
I open UDP PORT 445 on Firewall (WSBS 2011), but in Syshelp (symatech validation too) the result is:
Title: One or more network services, ports, protocols or associated processes may need attention
Product: Backup Exec Server
Status: Warning
Details:
Warning SYSTEM's UDP port 445 is not open or listening.
Warning Port is not open or listening.
UDP Process: System
Ok SYSTEM is the correct process for UDP port 137
Ok Port 137 with protocol UDP is open on the following IP addresses: - 25.54.28.213
- 169.254.41.25
- 169.254.244.222
- 192.168.0.6
- 192.168.1.2
Ok Process System has port 137 with protocol UDP open.
Ok Process System has port 137 with protocol UDP open.
Ok Process System has port 137 with protocol UDP open.
Ok Process System has port 137 with protocol UDP open.
Ok Process System has port 137 with protocol UDP open.
Information Network service name not defined. Test skipped.
Information Default settings - Network Service Name: netbios-ns Port: 137 Protocol: UDP Process: System
Ok SYSTEM is the correct process for UDP port 138
Ok Port 138 with protocol UDP is open on the following IP addresses: - 25.54.28.213
- 169.254.41.25
- 169.254.244.222
- 192.168.0.6
- 192.168.1.2
Ok Process System has port 138 with protocol UDP open.
Ok Process System has port 138 with protocol UDP open.
Ok Process System has port 138 with protocol UDP open.
Ok Process System has port 138 with protocol UDP open.
Ok Process System has port 138 with protocol UDP open.
Information Network service name not defined. Test skipped.
Information Default settings - Network Service Name: netbios-dgm Port: 138 Protocol: UDP Process: System
Ok SYSTEM is the correct process for TCP port 445
Ok Port 445 with protocol TCP is open on the following IP addresses: - 0.0.0.0
Ok Process System has port 445 with protocol TCP open.
Information Network service name not defined. Test skipped.
Information Default settings - Network Service Name: microsoft-ds Port: 445 Protocol: TCP Process: System

Hi,
à
I need the UDP PORT 445 listed on SYSTEM Process.
à
Warning SYSTEM's UDP port 445 is not open or listening.
Based on your description, I’m a little confused with this issue. Please run following commands with administrator
permission and monitor the result. Would you please check and confirm whether any process listened the UDP port 445?
netstat –ab
netstat -a | find /i "445"
In addition, I noticed that you use Syshelp (Symantec validation tool) to check. I suggest that you would post
the warning message in Symantec Forum and confirm this issue. I believe we will get a better assistance there.
If anything I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Solution Monitoring System Overview

There are non-production systems showing in the system overview in Solution Monitoring. They are dev and QA systems that are in the logical component. How do I removc them?

Hello Jerry,
Solution Monitoring overview just displays the the solutions and the number of systems rated green, yellow, red, etc for
Earlywatch Reports, System Monitoring, Business Process Monitoring, and Open Tasks.
As you can see Solution Monitoring is based on Solution, so whatever systems you have included in that solution will be included in the solution. The overview is an overview of the solutions in Solutin Monitoring. This is why it is called Solution Monitoring.
If you are talking about System Monitoring, or BPM or EWA, etc, then if you don't want non-production systems included, then they should not be included in the solution, or the status of those systems in the solution should not be "Put in Solution".
Perhaps you have not set up your solutions in the best way?
Regards,
Paul

Monitoring inbound processing and Sync/ Async communication on PI7.11

Hi All,
I am new to PI. We have following two requirements to be done on PI 7.11
1)     Monitoring inbound processing (Txn Code SWF_INB_MON)
2)     Monitoring Sync/ Async communication (Txn Code SXMS_SAMON)
Kindly let me know how should I proceed or what document should I follow or any scenario is to be configured.

Hi,
    1. Start inbound processing monitoring with transaction SWF_INB_MON or SWF_INB_ADM.
           Note that you require administrator authorization for transaction SWF_INB_ADM
    2. You can monitor the throughput of the inbound processing either on the basis of individual process system or system-wide. In this way you can display the throughput figures in any discrete time range, right down to seconds. A similar display for message packages allows you to monitor inbound processing with the same detail."
     3. You can display runtime information about individual messages, for example, the total runtime of a message in inbound processing or just the runtime of a specific section of the inbound processing. For monitoring individual messages click on "Display Message Packages".
regards,
ganesh.

System process constantly writing to disk

While dealing with another hard drive Problem, ive noticed in Ressource Monitor, that the process 'System' is constantly writing to my main drive.
Sometimes its about 100-200 KiB/sec, today ive watched it for a while, and its writing action was 1.5 MiB/sec for quite a while! Later on it was about 300-400 KiB/sec.
Why does this process write so much data to my disk? Considering Windows running times, this adds up to multiple times the size of my hard drive.
Anyone knows whats going on here?

I have a similar, though less severe issue that hopefully someone can help me with. The System process (pid 4) on my dual core Vaio laptop is writing to disk appx. once every 500ms. This is not performance impacting and I considered it just a
minor annoyance until I recently installed a SSD. Since SSD lifetimes are limited by write/erase cycles, I'm concerned these writes are deteriorating my SSD; not good since they're expensive and I LOVE the performance; boots in appx. 15s, instant IE,
etc.
As with the original poster here, the same activity persists in safe mode. Per SSD optimization guidelines I've read elsewhere, I've disabled all fetching (super, pre, etc.), indexing and all logging except Application, Security & System but the
writes persist.
Im using the latest (very recent) driver from Intel (Intel 5 Series 4 Port SATA AHCI Controller 10.8.0.1003 10/17/2011). I've tried other drivers and while the write pattern seems to change (drive activity light no longer blinks), Resource Monitor
shows they're still there. They also cause an additional issue of consuming CPU (?) which doesn't occur with the "recommended" driver I just mentioned.
Anyone know what these writes may be and if/how I can/should stop them? Thanks.
(BTW, love the caffiene->code quote :-)

How to monitor system from SOLUTION MANAGER?

Hi,
How do I monitor systems and send alerts from solution manager?
Thanks,

Hi Afi C
There are two types of monitoring in Solution Manager.
1. System Monitoring.
2. Business Process Monitoring.
1st one monitor system performance and 2nd one monitor specific jobs or transactions related to important business step based on the configuration.
If you have access to the service market place, you can some information related to above topics.
1. Quick link monitoring. www.service.sap.com/monitoring
   ==>Media library
2. Quick link BPM. www.service.sap.com/bpm
    ==>Media library (Under the technical information, Setup guide business process
          monitoring is goods one !). Same as business process monitoring, you can
          setup system monitoring from t-cd DSWP.
Best Regards
Keiji

Wireless Network Monitoring System

Hi friends,
I am planning to implement a Wireless network monitoring system as my final year project.
In this project I need to control calls from one mobile to another with the help of JCC or some other technique. Mobiles will be connected to Pc in the following pattern:
Mobile to radio transceiver which will further be connected to pc using RS232 serial port.
This way i will 3 mobiles connected in the similar manner as above.
I just want to know how i can control my calls from these mobiles??
Please guide me, as in how should i start??
Regards
Ron

Have you ever experienced any cross browser issues, when you
really build an app for critical app like this?
not really ... the only crazy thing i have seen is how each
browser uses memory..
you will see higher usage from IE than.. firefox...
IE also has an issue with cache.. so you have to reset your
page at every visit...( i cut that short thinking you understand
what i am talking about)
your biggest issue is the engine and processing of data..
thinks like that.. how you put that together will be HUGE..

HELP iTunes wont open but runs in system process on xp64 pro

iTunes was working just the other week. Now all of the sudden it wont open. However it will be running in my system processes taking up 36,752k
I've searched the forums and tried the suggestions also installing and uninstalling and upgrading to the latest version. iTunes very rarely gives me a problem and nothing major has happened to my system. I need a fix for this ASAP I use iTunes just about every day!!
Thanks,
Nick

Yeah great thanks, but i've been using it on xp64 for a year already with no problems
Xp64 doesnt have problems running 32bit programs for me
However there's got to be some kind of registry for this.

Monitor System Process

Similar Messages

Maybe you are looking for