MOVED: P965 Platinum Realtek Audio Vista 32-bit Driver 2007-11-22

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=112855.0

This is the URL that I ended up at for Realtek 8111 and there's no mention of Vista at all.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

Similar Messages

  • P965 PLATINUM / REALTEK network adapter connectivity problem

    hi,
    I cannot connect my PC with my laptop using a crossover ethernet cable. All of the crossover cables I have tested operate as expected when used to connect other computers. A fact that complicates things more is that the connection status is indicated as "connected" in the network connections window but no packets are received at all.
    My configuration:
    MSI P965 PLATINUM (flashed with v1.2 BIOS)
    OS: Windows XP PRO SP2
    REALTEK driver version: 5.654.721.2006
    Network IP, mask and gateway are manually assigned.
    Note1: The network adapter works totally fine when connected with my router using a straight UTP cable.
    Note2: My brother's PC (which has exactly the same configuration as mine) has the same problem.
    Thanks in advance

    Thank you all for your tips.
    Please note that network file sharing is enabled. If I use my ADSL router as a gateway (it is 192.168.1.1 as you can see in the ipconfig commands output) the computers do communicate.
    Problems arise when I use a crossover or straight cable to connect directly my desktop and laptop. Some things I have tried:
    - I have disabled the firewalls on all computers.
    - If I ping the localhost (127.0.0.1) I get packet replies. However, when I ping the other host I get timeouts.
    - I have set the connection speed manually from the device manager to 100mbit/full. Still no good..  :(
    P965 PLATINUM (DESKTOP PC)
    Code: [Select]
    C:\Documents and Settings\Administrator>ipconfig /all
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : desktop
            Primary Dns Suffix  . . . . . . . :
            Node Type . . . . . . . . . . . . : Unknown
            IP Routing Enabled. . . . . . . . : No
            WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Local Area Connection:
            Connection-specific DNS Suffix  . :
            Description . . . . . . . . . . . : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
            Physical Address. . . . . . . . . : 00-16-17-EF-3B-04
            Dhcp Enabled. . . . . . . . . . . : No
            IP Address. . . . . . . . . . . . : 192.168.1.2
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . : 192.168.1.1
            DNS Servers . . . . . . . . . . . : 192.168.1.1
    ACER ASPIRE 1403 (LAPTOP)
    Code: [Select]
    C:\Documents and Settings\Administrator>ipconfig /all
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : laptop
            Primary Dns Suffix  . . . . . . . :
            Node Type . . . . . . . . . . . . : Unknown
            IP Routing Enabled. . . . . . . . : No
            WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Local Area Connection:
            Connection-specific DNS Suffix  . :
            Description . . . . . . . . . . . : Intel(R) PRO/100 Network Connection
            Physical Address. . . . . . . . . : 00-02-3F-B1-F7-89
            Dhcp Enabled. . . . . . . . . . . : No
            IP Address. . . . . . . . . . . . : 192.168.1.99
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . : 192.168.1.1
            DNS Servers . . . . . . . . . . . : 192.168.1.1
    Is there any utility to check my network adapters? It is a VERY weird situation, because on both adapters the green light is constantly ON, and the orange flashes from time to time. I assume this means that on hardware level everything is fine. Moreover, I cannot believe that there is a firewall/AV that interferes, because even if I shut them down, I still can't ping the other host. 
    Thanks in advance

  • MOVED: P965 Platinum vs ATI 5770

    This topic has been moved to Intel Core 2 Duo/Quad boards.
    https://forum-en.msi.com/index.php?topic=136588.0

    Quote from: graner on 18-March-10, 05:02:27
    I have the same problem with XFX HD5770 XT 1 GB on my P965 Platinum mainboard. I have tried 1.8 bios and 1.93b with no result.
    I have contacted the support and hope for a new bios update. That must be the problem ?
    MSI P965 Platinum
    Intel Core 2 Duo E4500 2.2GHz Socket
    OCZ Platinum DDR2 PC6400 2048MB
    Hiper ATX 580W
    And here is the answer from MSI Costumer Service:
    Dear Daniel Granér,
    Thanks for contacting msi technical support team! Regarding your issue, this mainboard doesn't support ATI 5770 card. So please change other VGA card to use.
    Best Regards,
    msi technical support team

  • P965 Platinum/Realtek RTL8111 Connectivity Problems

    I have a P965 Platinum that has the on board Realtek RTL8111.  I have had it since Dec '06.  I have the latest Win Xp.  Driver 5.658.814.2006.  From the beginning I have had connectivity problems.  I have stripped the motherboard of all non-essential components and I have installed XP multiple times.
    Almost every time I boot up, and windows comes up, I get a Limited or No Connectivity error.  Notice I said 'almost' every time.  Sometimes I get connected right away.  I thought it might be a loose cord, and noticed that the left LED on the back of the LAN jack was blinking.  Which according to the manual means that it is talking.  I wiggled the cable around to see if it was a bad connection, nothing.  Then I replaced it and I connected.  Unfortunately when rebooted, it wasn't connected again.  After trial and error, I soon realized that by unplugging and re plugging the cable back in I could eventually get it to connect, which it eventually did every time.  Bad connection right?  Now here is the weird part, if I disable and enable the local area connection under Network Connections in windows enough times eventually it connects!  Here is exactly what I do:  First I disable it and then enable it again.  If it takes more than a couple of seconds trying to connect, I know it will fail.  So I keep doing it until it works.  I thought it was a BIOS or driver issue and being such a new board I thought I should just wait.  No other computer of mine has this problem.
    Thanks in advance for any help or advice.

    Quote from: Puffnstuff on 25-April-07, 10:09:14
    Have you tried using another cable to rule out the possibility that your cable is bad?
    Yes, I tried a new cable.  Same effect.  Now of my other computers have problems with the cable or connection.
    Quote from: HenryW on 25-April-07, 10:09:23
    Have you tried the updated Realtek drivers from MSI (5.664.0205.2007)? Dated 2007-04-20
                        HERE
    Yes, I tried those drivers which are also on the Realtek website.  The funny thing is that it connected the first time!  Unfortunately when I tried it again (reboot and restart) it did not connect.   So the driver upgrade did not fix the problem.

  • Vista 64 bit Driver for Apple Cinema Display

    I am trying to use a refurbished Apple HD Cinema Display to connect to both my PC and new Mac... it is integral that I can use it with both.
    Any help finding a driver that would work with my Windows Vista 64 bit OS would be much much appreciated... I hate it but I have to work with what I've got!
    Thanks so much!

    I'm looking for the same basic thing....
    Does anyone use a Apple Cinema 23" Display with Vista 64 bit? I'm wondering what video card you use on your PC that supports the 23" Apple display.
    I have a DVIator which worked great with XP, but now that my PC has vista, after the vista boot screen starts to appear, I get a black screen.
    Thanks

  • MOVED: P965 Platinum BIOS 1.8 worth trying?

    This topic has been moved to Intel Core Duo and Core 2 Duo based boards.
    https://forum-en.msi.com/index.php?topic=113122.0

    I dont' know what people say but one thing is clear: MSI 965 Platinum is JUNK!!
    The only cpu which could be clocked is p4 3Ghz. I've clocked it to 3800, bios ver 1.4
    with bios 1.5 1.6 system reset at 3500.  1.7 was ok again.
    Next cpu E2140 cloked from 1600 to 2144+corecell=>2270. note that sistem won't boot if fsb higher than 268 in bios (ver 1.5 1.6 1.7 1.8) but could be clocked if DOT activated.
    Next cpu E6750 clocked from 2.66 to 2.98  FSB 366. with fsb higher than 370 sistem reset, also with DOT i see higher instability.
    OT: i read on this forum that MSI told us that this board is for gamers/not overcloking ))))
    well then, why the F*** put PLATINUM? it's the same S*** like NEO but 60E more..for what?
    So my friends, i ordered an ASUS(i don't like brand but i like quality), i'm sad 'cause i've used MSI since 815E but now even P35 Platinum with rev1.1 is not more than a BULK, JUNK (look how poor clocking is).

  • MOVED: Neo2 Platinum - Nforce 3 - Vista 64bit Driver Problems

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=108696.0

    Hi Paul,
    I think that there will be no problems - if you include a good PSU in the set up.
    I would recommend to see what BIOS there is coming with the board - 1.9 or higher will recognise the X2 CPUs. If not strictly necessary, I would advice against flashing the BIOS of this board, unless - of course - you encounter specific problems. In that case I would flash an official BIOS (1.B) and not a beta, or modded BIOS.
    At present the 4800 X2 is still quite expensive; the 4400 X2 is much better from a price/performance point-of-view ...
    As far as RAM is concerned: why would you want to run 4GB of RAM? For normal programs/games, 1GB is more than sufficient and only with some of the newest games a noticeable increase in performance can be seen when 2GB is used in stead of 1GB. It is hard to imagine that adding 2 GB more will lead to an increase in performance. Instead it must be expected that you will loose performance (because of dropping to 333MHz, looser timings, etc.). I therefore recommend to go for 2GB of good quality RAM.
    Hope this helps,
    Hans

  • MOVED: P965 platinum

    This topic has been moved to Operating Systems.
    https://forum-en.msi.com/index.php?topic=110653.0

    I stumbled across something online that made it sound like this was standard behavior for MSI boards? Basically announcing USB connections. My last two MSI boards did not do this, and I'd really like to make sure I don't have something else going on.

  • MOVED: P965 Platinum memory issues

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=104913.0

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=104913.0

  • MOVED: p965 platinum and Corsair XMS2 6400 overclocking issue

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=107327.0

    Please read this topic. It's a bunch of info, but it will tell you a lot about this board. Your DRAM is not the issue at hand, BIOS 1.2 is. Flash 1.51 beta to overclock stable. CAS Latency 4 is not an option in the current BIOS versions, it gets set to 3. So for the time being it's either CAS 5 or CAS 3.

  • MOVED: P965 Platinum + Q9400 BIOS updates ???

    This topic has been moved to Intel Core 2 Duo/Quad boards.
    https://forum-en.msi.com/index.php?topic=120662.0

    This topic has been moved to Intel Core 2 Duo/Quad boards.
    https://forum-en.msi.com/index.php?topic=120662.0

  • MSI P965 Platinum frontal audio connector help needed!

    Hi there guys,I recently brought a pc off craigslist and it came with this motherboard as described above.
    My problem is with the front panel audio connectors.
    The case of the computer is this one shown in this picture.
    http://imageshack.us/photo/my-images/641/1304612874870.jpg/
    Inside this pc case it has the following connector pins
    1.SPK-R - white wire
    2.SPK-L - red wire
    3.GND - black wire
    4.MIC bias  - white wire
    5.GND - black wire
    6.MIC IN - red wire
    This motherboard comes with a JAUD1 and a JFP2.Can anyone tell me where to plug those pins in for my front audio connector to work?
    and I do have the manual.I think the problem is that the wires from the case is for AC97 but this pc is equipped with HD audio.
    Thank you all for reading.

    Quote from: cronnin on 06-May-11, 06:02:12
    Your board is HD audio.
    JPF2 should be for switches and LEDs as I recall, so go into JAUD.
    Maybe this can help:
    http://filedb.experts-exchange.com/incoming/2010/10_w43/360281/ac97.JPG
    http://img.techpowerup.org/100423/HD%20Pin%20out.jpg
    Some say that if you disable front panel jack sensing it may work, cause as you see from the diagram mic L/R and speaker L/R are on the same pins.
    Some people get it working, and some have lot of noise..probably depends on the design of front panels PCB.
    http://www.nitroware.net/index.php/editorials/67-articles/159-fix-broken-front-audio-ports.html
    Probably the best way is to switch to AC'97 compatibility mode in BIOS?
    http://www.ninjalane.com/images/lanpartyut-915p/bios_audio.jpg
    Thanks alot cronnin.That was very helpful.My only problem now is that the AC97 plugs from the case has two ground.
    Which one do I use and which one do I not plug in?
    Also,I read on the internet,that plugging in ac97 plugs to HD audio connectors might blow up the motherboard.s that true?

  • Xi-Fi Xtreme Music and Windows Vista 32 bit driv

    I have a lot of problems with Vista driver. There is only one driver and it doesn't work correctly. Sometimes I have very bad noise, the sound skips, and it often has disturbance. When I connect the integrated sound card there are no problems. But I didn't give 00 $ for noise and to use intergrated soundMessage Edited by Botev92 on 05-29-20070:4 AM

    Well to give Creative their due even if they took their time there are new drivers out for the X-Fi Xtreme Music and Vista and they work just fine. You can even select the different modes (entertainment, Game or Audio Creation) from within the Audio Console menu. Link:http://us.creative.com/support/downl...type=0&x=3&y=9

  • Lenovo 3000 g530 4446-35u Vista 64 bit Driver problems

    I recently purchased the laptop in the subject line.  I immediately replaced the hard drive,   the ram, and installed vista home premium 64bit.  I was able to find drivers for everything but the touchpad device.  I have been unable to determine the tech specs for the device or find a driver.  Any suggestions would be appreciated.

    if you want to know more about the subjectyou can people go there
    http://www.vista4beginners.com/DPC-Latency-Checker
    for all ich9 usb and with broadcom network cards this and my coment can be usefull.
    have a nice day,
    Mike

  • R7 240 Windows Vista 32-bit Driver

    anyone know where to find the official driver from a MSI R7 240 2GD3 LP because i cant not find it on their site?

    no there are non on the MSI site you would need to get a driver for it from the AMD website for that http://support.amd.com/en-us/download/desktop?os=Windows%20Vista%20-%2032#amd-catalyst-packages <--- 32bit drivers for your card are there!

Maybe you are looking for

  • Brand new IPOD Shuffle won't charge battery!

    What am I doing wrong??? I did download and install ITUNES, and added a bunch of songs that show in ITUNES,(that I put on the IPOD) and when I dock it, it blinks yellow, then goes to solid green. After I eject it, I try to turn it on, but, I get no l

  • Purchase Order Table Control

    Hi,   I am trying to change the columns in the table control of the purchase order screen (ME21N) but cant seem to able to do it, To be more detailed I clicked on the "Configuration" button of the table control, clicked on "Administrator" and made th

  • Feature request -- change tooltip font size

    The tooltip font size is rather small for those of us needing reading glasses or with limited vision.  At the very least the tooltip font size should be changeable under the "Accessability" options.  Anyone know a way to work around this?  External s

  • Issues saving Stamps Acrobat 9

    I have a client who uses Adobe Acrobat 9.  When she creates a stamp, it would used to save it and she could use it the next day.  Now, starting about 3 months ago according to the user, when she reboots her machine, it deletes all stamps she previous

  • SCN Number

    Hi, When is the SCN number exactly generated. I read that it is generated when commit happens. If that is the case. How does oracle know that (when rolledback) which transaction to roll back. I mean how does it monitor all the transactions ( Both com