MSI KT4V KT400 chipset, all sorts of problems

Okay so I intalled a new heatsink, the Volcano 12, after having a Swiftech MCX370-CR2 and the Swiftech totally messed up my Zif Socket and CPU, the CPU still works and all, but now I'll tell you why I HATE this motherboard.
Problems I have now:
CD drives not detected anymore
CPU temps are way high, were really low at first which is the same for my last heatsink, and this one is better.
Can't overclock to 145mhz, it worked for a while, arrg.
Bottom line is I am very mad with this motherboard.
Finally I have to say
EDIT: CPU high temps may be related to the MSI PC Alert 4 that I have installed.

Sorry that was a bad description. I installed the heatsink correctly, where can I get Alert 3? I have the fan connected using a 4 pin and I have the RPMs controlled by the 3.5" bay. I didn't try a flat controller, but it is odd that it stopped working after it had been working for probably 3 months.
I cleaned the die and put new thermal paste on, but many are telling me to reapply with only a certain amount, which I thought I had. I'll try the thermal paste again. I need to get that PC Alert 3 you speak of, can I have a link to that? Thanks.
EDIT: teamps now are 47C idle, like 51C load, according to PC Alert 4, bios I'll check for you and edit this again.

Similar Messages

How do I uninstall an application from my Macbook Pro? I have been having all sorts of problems with Adobe products, and need to uninstall so I can re-install them

How do I uninstall an application or software from my Macbook Pro? I have been having all sorts of problems updating Adobe Reader and Flash player on my mac that I need to uninstall them so I can re-install them.

Uninstall Flash
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
For Reader search "unistall adobe reader mac" for the version you are running
https://forums.adobe.com/message/4793407 XI
http://helpx.adobe.com/acrobat/kb/installing-uninstalling-acrobat-x-mac.html X

Hard drive replacement, now all sorts of problems

A couple weeks ago my hard drive crashed. I confirmed at the Apple store that it was the hard drive, and they gave me instructions on how to put a new one in.
Since I've put the new one in I've had all sorts of problems.
1. My previously totally fine battery doesn't show up at all. Though the battery says it's fully charged, the laptop says that no battery is available.
2. DVDs don't play. The DVD player gets rolling, and then freezes.
3. Photobooth doesn't load "because the camera is in use by another application".
4. My external sound input/output can't be recognized or set up though the driver (also because the IOdirect is "in use").
5. The computer won't completely shut down sometimes and freezes on the blue screen just prior to complete shut down.
I've wiped the hard drive and started over to the same results.
Please, any help?

Have you fixed you problem yet?
1. Have you checked to make sure that the drive is plugged in properly and setting on the proper mounts that were on the old drive?
2. How did you go about putting the OS OSX on the newly installed drive? Ex. Did you install OSX and all you applications then then restored you personal data from a backup? Did you use Time Machine to restore OSX and all data to the new drive? Or did you use a previously cloned drive, along with a program such as SuperDuper or Carbon Copy Clone, to restore to the new drive?

I just upgraded to iTunes 12 and had all sorts of problems. After several restores I seem to be able to sync my iPad with iTunes BUT I can't delete anything off my iPad from iTunes. Any ideas on what to do?

I just upgraded to iTunes 12 and had all sorts of problems. After several restores I seem to be able to sync my iPad with iTunes BUT I can't delete anything off my iPad from iTunes. Any ideas on what to do?

-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....

Help!! All sorts of problems with my BlackBerry

Hi everyone,
I need some help..or lots of it really! I've had my Sprint 8830 for about a year and a half to two years. Recently I've been having all sorts of issues. My call log/texts disappear which I assume is related to memory..but I have deleted many things to free up the memory on my phone. I'm also not receiving texts. People are constantly telling me they send me tons of texts and I never receive any of them! I tried sending one to my phone from another phone and it didn't go through the first 4 times, but the one time it did, my phone beeped and as I went to read the message it just disappeared! Also, my phone isn't ringing and is going straight into voicemail..only notifying me of a new message--not a missed call. I've been in my house when these things have happened so I know it's not a service area problem.
I took my phone into Sprint 3 days ago, they said they installed a bunch of updates but I'm still having problems. Help! Is it just time for a new phone?
Thanks for any help you can offer!!
Solved!
Go to Solution.

The normal minimum memory limit is considered 15mb, you have 6mb.
Do you have a lot of third party applications on your BB weather, icall,bbalerts etc?
I do not know your experience level, so if you know this I'm sorry but please read and let me
know if this applies.
Most people close the applications by pressing the escape or red key. This does not close the applications.
Each application has a CLOSE option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom CLOSE is listed. Go through each application and press close. Go into the browser press menu and options select cache operations clear all categories and hit escape it will say cleaning memory. If your device has:
Go to options - security - memory cleaning - enable it. The BB will now clean memory when idle for 5 minutes.
you will have an icon on you screen for memory cleaning make sure you press it. Make sure you use the CLOSE button each time you are done with an application.
To address the immediate needs, please read and follow the steps in JSANDERS ARTICLE :
http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...
Once you have stabilized your phone, use JOHN CLARKS memory optimizer guide:
http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...
If you apply these two guides and follow the steps, your Blackberry will run much smoother and dependably
Thanks
Please remember to resolve your thread.
Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Having all sorts of problems

I have a Nokia 6111 and am encountering all kinds of problems trying to hook it up to my PC.
My partner has a 6230 and already has PCSuite 6.1 loaded on the PC. He has a DKU-2 cable.
I have CA-53 cable and first problem appears to be the PC not allowing me to load drivers for it. I just get the error message "Previous installation failed to uninstall" half way through the set up process, then I am booted out.
New phone came with PC Suite 6.6. This also will not load due to unsuccessful uninstallation of previous version. I have tried to uninstall via Control Panel but it won't have it. It just won't come off.
Questions:
1. How can I get PC Suite off my PC to get new version on? 2. Do you think old version is corrupt?
3. Is it actually a bit stupid to be attempting to connect 2 different phones to the software (not at the same time!)
I hope you can help - I am tearing my hair out!
Thanks
Vikki
(I am running Windows XP SP2)

Hi Vikki!
I'm glad you're able to move things along yourself and therefore answer your own questions! Shows that you're putting in the effort! :-)
With regards to uninstalling the DKU-2 drivers, I've detailed how you can do this in another post although as the post says, be very careful when following the instructions... link is as follows:
http://discussions.nokia.co.uk/discussions/board/message?board.id=pcsuite&message.id=1863
Once you've got the old DKU-2 drivers removed, try reinstalling PC Suite 6.7 and it should work ok.
Just to clarify an earlier point as well, the PC Suite should connect ok to multiple phones... even at the same time!!
Hope this helps.

MSI KT3 Ultra-ARU + All In Wonder Problem

I've got a odd problem that is related to putting my machine into Standby. If I do so the night before, then wake the system up in the morning I see issues that point to memory corruption or driver failure or a conflict with the VIA chipset. Outlook Express will lock up on launch, the ATI digital VCR app will either not launch or fail to shutdown if it does. I clean installed Windows XP, then updated it with XP SP1. Of note is that the video card works ok with the OS supplied driver but if you install the ATI drivers (which are needed to make the TV and Digital VCR work) this stuff happens. I have reinstalled several times so I am pretty sure this isn't just a messy config issue. I've had bad experiences similar to this with VIA chipset mobos in the past so this doesn't surprise me.
Anyone ever see this? Know of a fix?
-- Richard
Mobo: KT3 Ultra-ARU MS-6380E
CPU: Athlon XP 1800+
Video: All In Wonder Radeon
RAM: 512MB Samsung PC2100
HD: Seagate 80GB Barracuda IV
OS: Microsoft Windows XP Professional
Version: 5.1.2600 Service Pack 1 Build 2600
BIOS Version/Date: American Megatrends Inc. 07.00T, 4/2/2001
SMBIOS Version: 2.3

I don't know if this will help or not but....
I had issues with the latest drivers from ATI. I downloaded the tv capture drivers, display drivers, etc. in the 7.7 bundle. I went back to the 7.6 bundle and have had zero problems since.

Re: All sorts of problems with BT Broadband

Hi, I too am having lots of problems and wondered whether someone could help?
We moved into our house recently. Its 15 years old and has had a BT line previously, however we still needed a new one installing apparently.
Engineer came to do this saturday just gone but couldn't complete as some problems with exchange and the line not getting a dial tone etc.
Someone came out Monday to try and fix this, said further problems.
Someone came out Tuesday and finally said fixed. Got emails from BT saying line and broadband sorted.
Came home - broadband very slow. Plugged into the main socket, several calls to BT, checked speed online, the stats are below.
Despite it saying 7meg it is still very slow. Taking ages to download anything, simple pages on the internet take ages to load etc.
Also did a test on speedtest.net and got quite different results. Have posted both results below.
Getting very annoyed now as seems no1 can work out what the problem is, get transferred to BT tech help in india every night spending hours on end just for them to say they don't know what the problem is.
No idea what to do next. Advice much appreciated.
1. Best Effort Test:  -provides background information.
Download Speed
0.05 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.05 Mbps
For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
Additional Information:
Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 0.14 Mbps
If you wish to discuss these results please contact your Broadband Service Provider.
If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
Your test has completed please close this window to exit the performance tester.
1. Best Effort Test:  -provides background information.
Download Speed
0.05 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.05 Mbps
For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
Additional Information:
Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 0.14 Mbps
If you wish to discuss these results please contact your Broadband Service Provider.
If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
Your test has completed please close this window to exit the performance tester.
1. Best Effort Test:  -provides background information.
Download Speed
0.05 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.05 Mbps
For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
Additional Information:
Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 0.14 Mbps
If you wish to discuss these results please contact your Broadband Service Provider.
If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
Your test has completed please close this window to exit the performance tester.
1. Best Effort Test:  -provides background information.
Download Speed
0.05 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.05 Mbps
For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
Additional Information:
Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 0.14 Mbps
If you wish to discuss these results please contact your Broadband Service Provider.
If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
Your test has completed please close this window to exit the performance tester.
1. Best Effort Test:  -provides background information.
Download Speed
0.05 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.05 Mbps
For your connection, the acceptable range of speeds is 0.05 Mbps-0.25 Mbps.
Additional Information:
Your DSL Connection Rate :6.82 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 0.14 Mbps
If you wish to discuss these results please contact your Broadband Service Provider.
If you are experiencing problems with specific applications, servers or websites please contact your Broadband Service Provider for assistance.
Your test has completed please close this window to exit the performance tester.
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:57:28
Downstream:
6.656 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.9 dB / 29.0 dB
Line attenuation (Down/Up):
41.1 dB / 21.0 dB
Output power (Down/Up):
19.9 dBm / 12.0 dBm
FEC Events (Down/Up):
31043 / 0
CRC Events (Down/Up):
1 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
1 / 0

Hi again,
Having now waited a total of 15 days since the line went active, these are the stats. We did briefly get up to 5mb but it has dropped again. The router has not been touched, turned off or played with at all for over a week now. This is still not achieving the max it is capable of, any ideas?
Many thanks in advance
1. Best Effort Test:  -provides background information.
Download Speed
2.65 Mbps
0 Mbps
7.15 Mbps
Max Achievable Speed
Download speedachieved during the test was - 2.65 Mbps
For your connection, the acceptable range of speeds is 0.6 Mbps-7.15 Mbps.
Additional Information:
Your DSL Connection Rate :4.42 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 3.5 Mbps
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
3 days, 12:43:18
Downstream:
4.313 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
13.0 dB / 29.0 dB
Line attenuation (Down/Up):
41.6 dB / 21.0 dB
Output power (Down/Up):
19.5 dBm / 12.1 dBm
FEC Events (Down/Up):
4978107 / 597
CRC Events (Down/Up):
5258 / 410
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
95194 / 391
Error Seconds (Local/Remote):
977 / 275

All sorts of problems with P4N Diamond

Hello all
I am trying to get my P4N diamond motherboard to work and I am starting to get pretty p****d off with it. I have built many systems before and on the whole they work fine pretty much straight away.
The first few times I tried to boot the syetem up I got a series of low and high beeps from the board and I couldn't even get into the BIOS set up screen. After unplugging USB devices and network ect I finall ymanaged to get into the BIOS. If I leave my printer plugged in (USB) I get a beep from the system speaker every now and then.
I then tried booting to windows. I have 2 windows builds on my hard drives - both of them crash when I try to boot into them, I have tried safe mode.
I then decided that I would install a fresh copy of windows (even though I only did this about a week ago). I put my windows CD in (XP media centre) and try to go through the normal set up procedure. I I try to repair the current installation or install a new copy it crashes each time it examines the discs.
I then load the drivers that came with the MB as the wondows installer is booting up - I load 3, 2 form one disc and 1 from the other. Now when I try to install a new copy it hangs on please wait.
I have a 400W power supply this one, 2 IDE CD drives, one IDE hard disk (secondary) and 1 SATA Hard drive. FOr most of what I was trying above I had the IDE drive disconnected and was jsut trying to get it to work with the SATA drive.
I think this is something to do with Raid drivers (even though I don't want a RAID array) but I don't know how to fix it.
I was hoping to have this all workign for tomorrow morning. Now I am goign to have to use my slow old laptop for work instead.
I REALLY hope someone can help me with this.

I might have a little bit of insight for you on your problems.
1. Beeps from your P4N:
You should get one beep for every USB device you have connected to your system.
2. Windows crashes when installing:
Make sure that you have NO USB devices connected, if have USB mouse or keyboard, get old ones for initial install and then once windows is running connect them, also you can get adapters. Also make sure that you only have ONE stick of RAM in when installing. If you have two, wait till you have windows up and running to install the other. Make sure that you have NO scratches on the back of the CD.
3. Diamond Clue CODE no good.
Call MSI on this, you are not the only one.
When building a new computer you should always build bare bones to make sure that you can boot with no errors. Its really not needed to have your printer hooked up the first time you are going to boot up your new computer, these are the type on things that cause conflicts. I would try to get things running bare bones here...that means the mininum. Try one hard drive...then work your way up. If you dont want RAID it should be easier for you, make sure that you have the jumper settings right on all drives. ALSO it would help if you would create a sig line (see mine below) with all your hardware. Make sure that you incluse your PSU 12v...you have a dual rail 15 and 14. It will help the mods help you.
GL and post back with ?'s

Firefox 3.5 teh Personas are missing and reload page, Also Firefox is bogged and not working correctly, it is NOT working with iGoogle Homepage either, All sorts of problems

Firefox is bogged and does not reload right.. Firefox Persona's is missing..
iGoogle when down nearly 2 weeks ago and my iGoogle homepage went missing in action, all gadgets gone, just a blank page, NOTHING worked, all steps did NOT restore it, AND the help forum had some rude employees. The help forum details page is totally and utterly disabled and all you can do is type in the subject line your query and hope they answer, But you cannot type in the box when it asks for details so I had to type that issue also in the subject line, then one female told me from Google and rudely "funny I'm not having a problem with the help forum pages, nobody else is either" something like that but snappy... And rude, NOT helpful at all..
I'm wondering if Google knows their employees do this because frankly I buy goods and services quite often, its enough to cause me to go somewhere else and even spend a little more for nicer helpers... Anyway... I did all steps over there, Nothing restored my gadgets.. Nobody helped over there EXCEPT to say its all Firefox's fault.
So that is why I am here... To get help.. no settings over at Google or Firefox have I changed.. But Google did go down nearly 2 weeks ago with ALL blogs, many hundreds lost some important posts. After I spoke with the female it was after blogger came back online.... Then today my settings on myblogger was changed, one minute they are fine, the next they are different colored texts.. The type of background I use there, you have to manually go in to change the background FIRST before you change the text color, both of which I never did and yet someone went in there today to do this.
sorry for venting, very frustrated with service there.. It only stands to reason that if blogger went down and it happens to be exactly when I lost all gadgets etc, that they need not blame firefox for it... YET though blogger came back up the issue with the gadgets and entire iGoogle homepage is utterly still at hand, so I thought to write to their help forum but to get SLAMMED by a female that would be better off doing a boxing match in an amateur event rather then being impeccably a customer service agent that cares about customers and people.
I wanted to upgrade to firefox 4 BUT I heard there were some glitches not worked out yet, and I was worried not knowing if since I'm already having a glitch problem if it would make it worse to upgrade.
so firefox is not loading right, it is also not showing Persona.. And iGoogle is not working right either, not sure if Google and you have a connection but they keep saying its all Firefox's fault.
can you help me? I hope so... I love firefox and I had to use Opera today only because it was so bad that I had no choice.. Opera works fine but its firefox that I want..
take care,

I wish it were that but a long time ago when I had a problem with the gadgets with iGoogle back 6 months ago thereabouts I was asked to disable it then and I did and I just went to re-check and it is still not enabled, however, it will not let me un-install it though.. It only gives me an option to enable or disable.. Any advice ? So I'm wondering if it is something else still or is there a problem with the avast still ?
thanks again for your help. Mind you that this all started when blogger went down ..
take care

New 80GB Video Ipod having all sorts of problems!!!

I just got the 80GB for christmas and I have had nothing but problems. I actually haven't gotten it to play continuously without freezing:
-It freezes often and I have to let the battery completely die and recharge it in order for it to respond.
-I fully charge the battery and then when I turn it on it says that the battery is really low.
-Sometimes my computer recognizes it and sometimes it doesn't?
Last night i charged it for over four hours. When I went to turn it on today, it turned on and then immediately froze on the main menu. I managed to reset it but the battery is at only 50% after fully charging it last night and not using it?
Did I get a lemon or is everyone else having these problems? Having a brand new ipod freeze on an 8 hour plane flight is a real drag.
Thanks,
Dezmond
G4 Powerbook Mac OS X (10.4.4)
G4 Powerbook Mac OS X (10.4.4)

As far as freezing up....have you tried restoring your iPod to resolve this issue? Where is your music from.....CD? iTunes Music Store?
Do note that if your computer is set to go to to sleep then it will not pass a charge to your iPod. Although you think it is charging all night long, really it's not. So check System Preferences > Energy Saver for your sleep settings and turn sleep off.
A good tip about charging. When you are done charging and disconnect the iPod from the power source you should reset it..Hold the Menu+Select button for about 5-10 seconds and it will restart. Upon restart the iPod goes thru certain checks with one of those being to update the battery icon. Sometimes you just aren't really seeing the proper battery status. So just reset it next time and see what it shows then.

My Brother's iPod Nano Is Having All Sorts Of Problems. HELP!!

Hi. I'm new here and I recently handed down my 1st Generation iPod Nano to my brother and I bought a new one.
Now he is having issues with it that I never ran into when I owned it. He can't drag and drop the songs onto the iPod, it randomly disconnects when he has it plugged in, and then it randomly gets recognized by the computer again and starts auto-updating all the time.
It also says something about the proper software to update iTunes is missing, and that iTunes needs to be re-installed.
We've tried reinstalling, and we still run into the same problems as previously mentioned.
I'm wondering if it has something to do partially with the sync options and software versions, and also with my brother's PC being pretty broken down.
Help PLEASE.

On my computer it doesn't randomly disconnect like it does on his, but it still wouldn't let me drag and drop AAC files onto my iPod towards the end of me using it, and it used to let me easily drag and drop.

All sorts of problems with Address Book

I am having a lot of problems with my Address Book all of a sudden. It started last Friday when out of nowhere my address book was empty. I used Time Machine to restore it and all was good, but then the next day, the same thing happened. Thankfully I had a backup of the archive and re-imported it and it worked well for a while then the same thing happened.
In total, it has erased itself about 3 or 4 times, and today a new issue has arisen: my groups have all disappeared. The contacts remain, just the groups are all gone. Smart Groups however have remained.
Any idea what could be going on here and how to fix it? I've also noticed a huge slowdown in my computer and see that "ADDRESSBOOKMANAG"is running often and taking up a ton of RAM.
Thanks for any help.

Well thankfully my address book has stopped deleting itself <knock wood>, but I'm STILL having the problem with AddressBookManag running all the time taking up tons of memory. Anyone know how to fix that?

All sorts of problems out of the blue

Hello. I have a G4 powerbook 1.33 running 10.3.9. Late last night, I was working on some stuff and I think I ran the computer a bit too hard. Now it's running incredibly slow even opening up a folder. It doesn't have enough power to complete simple tasks, and after a bit, it reads "error 10810". Also, my battery icon says "no batteries available" and only shows an "X". It runs on the battery though. I also notice that my airport won't run either. The icon is always in the "off". I've disc repaired the start up disc as well as repairing disc permissions, and nothing has changed.
Should I perform a clean install? I've got everything backed up. I can't tell if this is a hardware or software problem. Does anyone have any ideas at all? Thanks alot inadvance.

That "no batteries available" and only shows an "X" is a problem. Try resetting the PMU (Power Management Unit) by performing the following:
1) Shut down the PowerBook.
2) Disconnect the battery charger and remove the battery (using a coin).
3) Press and hold down the power button for 5 seconds and then release the button.
4) Install the battery and connect the battery charger.
5) Turn ON the PowerBook.
6) After its boots you will see a screen message saying the clock time has been set. Click OK.
15" PowerBook (High Res, X2DVD) Mac OS X (10.4.4)

All sorts of problems with iPod Touch

So yesterday I updated my Touch after like three attempts. My wife decided she wanted hers updated so I said I would do it. Well hers went through very quick with no problems since it's an 8GB model. When it was finished syncing for the last time in iOS5 I realized all hers music and apps were gone. This happened when I updated as well, but I just had to resync and it updated my music and videos. With hers I finally ended up hitting restore because nothing was coming back; this did nothing. We went through the steps of apple ID and what not anyway. Today when she wants to update some apps it's asking her for my apple ID. I thought this was weird since I have never once put my ID onto her Touch. I went to her Store tab in settings, and sure enough her email was the only one signed in. I made sure to sign out of her completely just to be sure, and signed back in. Went to update apps and it still showing my email, and asking for password. What the **** is going on?

I have the newer master socket - with an adsl filter - this should be fine as i have had decent (6-8) download speeds for years using this. I have also tried the test socket - still 0.4.
I always connect to the hub using a wired connection - not wireless with my main pc - there is another pc in my flat which uses wireless occasionally - again this has always been the case.
My pc is not very old and does not have anything running in the back ground - I was using this pc when the connection was 6-8mbps - in fact nothing about he pc or set up is different from when the BB was fine.
I have done the quiet line test before and it was fine.
I have speed tested my connection on both bt speed test and speedtest.net every day and at different times since having this problem and download speed is always 0.4mbps - upload varies from 0.2mbps to 0.4mbps.
I am using the white home hub 1.
I will post the full bt connection test results and adsl settings later when i get home
A bt engineer was at my house yest and he said everything is fine with the line - bt are also saying this and are saying the problem is because my ip profile is too low. I could not get an explanation of what an ip profile is or what would cause it to drop so much.
C

MSI KT4V KT400 chipset, all sorts of problems

Similar Messages

Maybe you are looking for