Msi live monitor error messages
I have a msi mx 440 card and on msi live monitor i get error messages saying the service has not been started hit ok then does it again hit ok then loads any reason for this thanks
Quote
Originally posted by ChippyBlue
I have tried reinstalling live monitor, and uninstall it and try downloading the lastest ver. from MSI Downloads. But still left with the same problem
MSI KT4v MS 6712
Athlon XP 2400+ Thermaltake Heatsink fan 9000RPM
256 Mb DDR PC 2700
Nvidia GeForce 5200 8x 128 Mb
SBlaster
HDD 0 Maxtor60Gb HDD1 Maxtor20Gb Lacie 120Gb both Ata 133-7200 RPM
USB 2.0
CDR 52x
CDRW 48x12x50x
Thermaltake silient 420w P.S.
Epson 1660 Scanner
Epson Stylus Color 1160
Joystick
Floppy Drive
PS2Mouse
Similar Messages
-
Help - MSI VGA Monitor Warning Message
Hello Friends,
Sorry by my English. I am a spanish user.
I buy a Geforce 4 Ti 4200 Agp8x.
I installed "MSI VGA Monitor Warning Message" but it give me this error message:
Fan speed is unusual
Now fan speed is : 1670 Rpm
Memory voltage is unusual
Now memory voltage is : 3.34 Volt 8b
I have a mb "Asus tuv4x (bios 1.005beta)" with a PentiumIII 1000. I have not installed the msi drivers. I have installed the 43.45 reference nvidia drives.
¿What is that error? ¿the vga or the mb is bad?.
Thanks by your help.Thanks by your reply.
Yes. I loaded 4.47 Via 4in1.
I am running "MSI 3D turbo experience". When I run this sift it open a internet explorer window with a error for a file ".ocx" and after it give the error message about speed fan et voltage.
I read some post that say that this soft dont work well in xp. I have xp.
Now I installed the last version of "3D turbe experience" from web of msi (2,13) and y have lowed the security for the "active x" in the security tab of tools of internet explorer.
Now I have not the error message and the "3D turbo experience" internet explorer page load but it dont give the the speed fan.
Thanks friend. -
MSI Live Monitor Script Errors
Since inception, I have not been able to run MSI Live Update....Despite numerous updates, I receive internet explorer script errors when initiating the program. Sometimes this causes a hang in Windows XP. The Internet Explorer Script Error box reads the following: "Line 111, Char: 2, Error: The Server Threw an Exception Code: 0, URL:file://C:program filesMSILive Update 3LmonitorLmcheck.htm".....tried changing settings w/o success inside Internet explorer.....
Any suggestions?????
Thanks in Advance! ?(Alternatively you could download the bios from here:
http://www.msi.com/support/mb/FM2-A55M-E33.html#down-bios
That should allow you to download it and flash it via the BIOS I believe. -
When I try to open Live Type it gives me an error message: wrong type. What to do
never mind I got it thanx, pandini
-
I wonder if I could contribute something to the forum. It isn't clear (to me anyway!) that one cannot create a Live Paint group if there is text in the area to be converted. This I discovered fairly rapidly but the regular error message is very general in content, it is up to the user to discover what is inhibiting the conversion. But I have found that, if I create text on paths and then delete the text, it is easy to leave isolated anchors on the artwork which are barely visible and they will inhibit the creating of a Live Paint group. When I hit the snag, I looked in all the usual places online but there didn't seem to be any obvious threads. In the end I worked it out for myself. This is not a criticism, I think Illustrator CS6 is superb!
SteveYou might try using Object>Path>Cleanup to remove stray points and empty text paths.
-
Windows Live Mail error message appears in subpage
I am getting an error message when I try to go from an email message to a sub page and the sub page will not load.
The message in a box says "X There was a problem sending the command to the program" and when I click on OK an Internet Explorer heading is shown with "connecting" in the tab and the rest of the page is blank. The page does not load.
Can anyone suggest a solution?
Thanks
ronswoldHi mate
If you would search for this error message (There was a problem sending the command to the program) on google page then you would get a lot of hits.
Seems that you are not the only one who gets the error message but this has nothing to do with your Toshiba notebook but with the Windows OS.
In most cases an firewall causes this issue possibly you have installed Zonealarm or something like this
Check this and remove or disable the settings which could prevent the software from loading. -
Anyone having "URL not valid" error from Live Monitor?
I sent a support email to MSI, but they are on vacation till the 5th. I was just wondering if anyone else has encountered this issue. Below is the message to MSI support:
Quote
MSI Live Monitor has started to behave strangely. Yesterday I clicked auto-search and the dialog box came up as normal, I clicked "next," and an error message came up with the heading "LMonitor" and "The url is invalid." So, I closed it and restarted Live Monitor. I tried it again and received the same error message. I uninstalled Live Monitor, (I didn't delete a file Windows stated as shared) and downloaded Live Monitor from the website. Installed Live Monitor, started it from the installation, and ran auto search. It worked this time. But, I then tried it again, and again, the same error message occured. I rebooted, and tried auto-serch again--once again, the error message occurred. Anyway, prior to yesterday it seemed to be working fine. I did a second uninstall, and re-install. Again, it worked one time and the second time the error message occurredCCB33,
I haven't received a response yet, but MSI has only been back since the 6th, and after that kind of time out I bet they have a lot of emails to answer. Funny thing about your post on this thread. Just before I read it, I tried MSI Live Monitor and had the same thing ocurr. So, I uninstalled it, reinstalled it and it worked the first time. I then crossed my fingers and toes, exited the program, restarted the program, tried auto-search, and IT WORKED! No error message appeared. I exited again, and restarted the program -- it worked again. Woohoo! This time after exiting the result window and the program still running, I then tried the auto-search which worked yet again. It seems it's functioning now. If I were you I'd uninstall the program and reinstall it again(I downloaded it from the MSI website ( http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_liveupdate.php ). I'll try it again tomorrow and see if it still works.
Edit: This morning, USA eastern time, I tried it and it worked. This afternoon I don't get the error but a message stating the server may be busy or no internet connectio. Seems to be working fine now. -
It appears that something in the following Microsoft Update causes a scripting error in MSI Live Monitor.
The update details are below:
813489: April 2003, Cumulative Patch for Internet Explorer 6 Service Pack 1
The scripting error occurs immediately after you click "Next" following the completion of the "Auto Search".
The problem began immediately after installing this MS Update and was resolved when this update was removed.The scripting error that occurs is detailed below:
Source: Internet Explorer Script Error (window title)
Line: 56
Char: 1
Error: Access is denied.
Code: 0
URL: http://tw.msi.com.tw/autobios/VerChk/XSeries.asp?MSIOCXVersion=3.37.000&WorkFunction=LMonitor&WorkPath=C:Program%20FilesMSILive%20Update%202
The window has a prompt asking if you wish to continue running scripts on this page. Clicking Yes vs No both leave you with a blank MSI Live Monitor screen.
I reinstalled the MS 813489: April 2003, Cumulative Patch for Internet Explorer 6 Service Pack 1 to recreate the script error. -
MS-8448M MSI Live Update OSD wont dect later Firmware
--------------------------------------------------------------------------------
MSI Live Update 3.53 OSD wont detect later Firmware
error message:MSI Live Monitor found no available version from MSI Server
I just installed the MS-8448M (X48) (ATAPI COMBO48XMAX ) Drive
The firmware is Version 1.10.I downloaded Version X48-Vs120 I want to update the drive but live update state no updates are available yet I downloaded one
I tried to update through Dos with no luck:wall:well I found it OMG!
Model below
-MS8448M- MSI DVD/CDRW COMBO BLK/WH PAN
X48MK0309011494 1
Live Update Info:
MSI Live OSDTM Version: 3.53.000
Optical Storage Drive Information:
(1) OSD Manufacturer MSI
(1) OSD Model Name MS-8448M
(ATAPI COMBO48XMAX )
(1) OSD Chipset Vendor MediaTek
(1) OSD Firmware Version 1.10
and NOTE here is the link:
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=499
------------------------------------------------------------------------------------- -
Automatic restart of Error-Message in Adapter-Engine (Job?)
Hi,
we are working on PI 7.11 and facing following problem:
Often in message-monitoring error-messages are forgotten because of wrong date-selections by the monitorer (not enough days back). It would be very nice, if there is a function witch is repeating error-messages in adapter-engine automaticly and witch can be scheduled.
Does anybody know something about an excisting program / function on PI?
Regards
JürgHi,
By default if any failure occurs in adapter engine (in case of receiver,during delivery to target system)
it will retry 3 times after a period interval of 5 minutes..this is by default even this can be change if needed with the help of the proeprties at NWA/VA...
but in case of failures at IE level (mappings,...) then you need to schedule the report RSXMB_RESTART_MESSAGES....
search SDN if like to know more about the reports...
HTH
Rajesh -
Msi Live Update....not Show The Last Driver
Hi
whe MSI Live Monitor (MSI Live Update 3), search.. not show, the last driver...and bios....
I have a G4MX460-VTP
and the driver in the MSI Live Update is:
Online Ver. 4403 (MSI Version)
but when visit the MSI webpage (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=154) the last driver is:
Nvidia driver 45.32 for Win2000/WinXP/Server2003 OS
and in the Nvidia webpage is 50.16.....
and the same happend with the VGA Bios...
y fix my vga cad update the VGA bios....but...this update don't show in the Live Update 3
How fix it???
thanksDo not update the VGA BIOS unless you have a good reason to. It is not like a motherboard.
Go to nVidia Drivers if you want the latest drivers.
Live Update may not have been updated OR the version reported by the Live Update utility has been tested successfully with that card. Newer drivers sometimes cause problems with older cards. The only way to know for sure is got to the nVidia site and try the latest. -
If there is a leftover file, where do I find it. And is my computer at risk?
I tried doing both, I couldnt find either symantec or live update in applications or when I searched through finder. I went to the activity monitor and found symantec and quit the process but the next time i logged on to my computer, it came back. this is what the error message looks like
Thanks for trying! -
Getting "line disconnected" error message when trying to monitor
Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer. Anyone else have this issue? Any suggestions on how to fix? I have reconfigured each camera with the router but still having the error message. I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).
Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras. It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup. However, starting on day three and on, it has worked very well.
The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs. All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about. I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days. It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log. -
Been using Live Update6 without any errors until recently. Trying to update to latest version I get the following message:
C:\Program Files (x86)\MSI\Live Update\unins000.msg is missing. Please correct the problem or obtain a new copy of the program.
Here are snapshots of the two errors I am receiving.
I cannot uninstall the old copy or install a new copy because I get the same message.
I know most of you will say not to use Live Update, but I've been using it without any errors until recently. Any way to repair it?you can try this uninstaller to complete remove any entries:
http://download.cnet.com/IObit-Uninstaller/3000-2096_4-75161625.html
before resintall it -
When I try to make a purchase at the App Store or iBook store or at iTunes an error message tells me my account is not valid for the UK store. I've no idea how I got connected there and I'd like help getting back to Canada where I live. Any suggestions?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done".
Maybe you are looking for
-
How do I get iCloud to work on iPad2?
I type in icloud in the address and it keeps going to set up this iPad 2. All settings for iCloud are set up per instructions. Am I missing a step here? Comes up on my MacBook pro just fine. Want to be able to use beta iWorks on this device. Th
-
Why is the formatting missing from my html page created from a template?
Hi All! Hope you can help me. I've created a new template in dreamweaver - all good. When I preview the template page in a browser everything looks perfect. But when I create a new html page from that template, even though the page looks perfect in d
-
Re: WD External drive won't mount
Hi I have just experienced this issue today. I have gone through all the threads here and searched various other forums but haven't been able to come up with a solution yet. I might be missing something. I'm running a 2011 Mac Book Pro OS 10.9.5 Mave
-
Hi, is it possible to view the vendor's name next to the vendor's number field in FB60 transaction (FI)? thx.
-
Does anyone have any information on the win32 api i would like to write a java application that woudl allow me to list all of the task names in the taskmanger Something like Win32::Setupsup for perl