Multiple life events on a same day

I am using Oracle OAB's SSHR and processing life events related to termination and termination reveral.
I reverse the termination of one employee and again terminated him so he has an open life event. Now his Hire and Term dates are same and so the system gives me error- :User Intervention Required: multiple life events occured on a same day".
How can I process his open life event?
Thanks if you can answer asap.

Hi,
you don't need any technical expertise for it. However, if you are using OAB for managing benefits, I suggest going through with the functional expert to understand he setup there and what life event should take precedence.
Steps : Navigate to Collapse Life Events form (I think it's Total Compensation -> General -> Additional Setup)
Give the winning life event name as whatever life event you want to take precedence (newhire or termination) and provide both the life event names on the right side. Choose the option @Void potentials"(or something like that) for the code and the winning life event date for the date.
Regards,
Vinayaka

Similar Messages

Multiple leave requests on the same day

We would like to enforce a check so that multiple leave requests of the same type cannot be submitted for the same day on ESS.
How can this be achieved ? We are on EP 7.0 and ECC 6.0 and are using webdynpro java version of the ESS applications.
Any configuration available for this or does this require a BADI implementation ?
Thanks in advance.
Thank You,
Raj

http://wiki.sdn.sap.com/wiki/display/ERPHCM/ValidationsforESSLeaverequest
read here, it requies a badi implementation only, no config is available!
You have to call backend exits from the badi of leave request
Edited by: Siddharth Rajora on Aug 2, 2011 7:48 AM

Multiple Meter Reads on the same day and Billing

Hi All,
There is a requirement to hold all reads received from Customer/ Meter Reader etc even they these are received on the same day for e.g. schedule read could be received in the morning, followed by customer read through internet and then another customer read through IVR system.
Can we store multiple reads on the same day?
If a read goes into implausible and then it's corrected, implausible read is replaced by corrected read. Is there any way to store old implausible read?
Thanks in advance.
SJ

Your questions answered below:
1. So my question is can we enter multiple reads to the Meter on a single day with same meter read reason? - Yes when we have MR reason which is not relevant to billing. In your case its 09 which is nonrelevant and you should be able to enter multiple reads with different time.
Make sure you supply time also when you are submitting your read. However there is a restriction of what level you can enter multiple MRs since SAP stores read at Minute level so you can not post 2 reads in same minute.
2. Are there any configurations to be done to allow multiple meter readings on a single day? - Not sure but standard SAP should allow you to save multiple MRs with the above rules.
Cheers
Jignesh

Two life events on the same date

Can you please advise how to handle two life events on a single date.

Dharmesh
If you have two life events on one date then you have to void the one manually and process the other. Also you can define collapsing life events and setup which life events will take precedence.
You can use following document to setup collapsing life events
Oracle HRMS Compensation and Benefits Management Guide (US)
[http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120hrcbusug.pdf]

Why are all my events showing up twice? Each time I enter a new event, it duplicates (same day, same time, same details)

The events auto duplicate - on the computer I use to enter them and on others that are synched to it. If I delete one of the identical entries, both disappear. Any suggestions? Driving me nuts! (ok, it may not be a long drive....)
Thanks!!

I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

Post multiple bank statements on the same day

The processing of electronic bank statements on a daily basis had to stop so that a more critical issue could be fixed. Now that I am two months (April and May) behind and the critical issue has been resolved I would like to catch up with the processing but not post the statement back to the original statement date in April or May since the GL Cash accounts have been reconciled for those previous months. I want to start processing as of June but I receive an error indicating that the "statement already exists; entry ignored". The system is evidently assigning a statement number to a particular date and not allow more than one statement to be processed in a single day. Is there any way to post more that one statement on a single day using tran FF_5 or any other way? I have already tested altering the date within the bai text file.

Since only one bank statement can be processed per day, I had to go back for the two months I was behind and process the files day by day until I got caught up to being current.
If I really needed to process many bank statements simultaneously, I could have created one bank statement manually and add all transactions and bai codes from many days and process that bank statement on a weekend date that would not be used by another statement date.

When I enter an event in iCal, soon thereafter multiple other "New Event" notices (one to four) appear for the same day. If I delete these unwanted "New Event" notices, they later reappear -- sometimes multiplying like rabbits. Any suggestions?

When I enter an event in iCal, soon thereafter multiple other "New Event" notices (one to four) appear for the same day. If I delete these unwanted "New Event" notices, they later reappear -- sometimes multiplying like rabbits. Any suggestions?

Well, using iMovie to rearrange clips in a mini DV video edited by another program is extremely time consuming. I found a workaround. It still takes time, but it's much faster than rearranging the clips using iMovie.
The workaround is as follows. Bring up Finder and go to the directory where your event's clips are stored (typically ~/Movies/iMovie Events/<name of event>). It helps to setup Finder to be in Cover Flow mode, so you can see the beginning of each clip. Then, sort the files in ascending order by the 'Date Modified' field. This makes Finder sort the files in the same order that they were imported from the mini DV tape. Clips with timecodes have the naming convention "clip-<year>-<month>-<day> hour;minute;second.dv". Clips without timecodes use another naming convention. With the files sorted by "Date Modified" in Finder, rename clips as needed so that the date/time in their file names are in ascending order. Note: when you rename a file, you need to restart iMovie. I suggest not running iMovie while renaming files.
I believe the file date/timestamp is only accurate to the second. Occasionally, there may be a couple of clips that have the same date/timestamp. This may cause the ordering to not be correct. The best way to find these is through iMovie. To modify a file's date/time, right click on the clip in the event in iMovie, and then select "Adjust Clip Date and Time...".
So, this workaround is a lot easier and faster than trying to rearrange things from scratch in iMovie. But it's still time consuming. Creating a project out of an already edited video should take less than 5 minutes (not counting import time), but that's not the case.
I submitted an enhancement request to Apple asking if they can add an option to sort an event's clips in the order that they were imported by iMovie. Those who have the same issue as me, I suggest you submit an enhancement request as well.
Anyone have any other suggestions?
Thanks.

Multiple birthdays on same day are not imported

Multiple birthdays on same day are not imported into a new calendar - only the last birthday for that day is imported into the calendar.
Any ideas what is going on?

Same problem with events from an iCal Calendar. I have an iCal Calendar that contains all the events I want included in my iPhoto Calendar - I use it every year, it has Birthdays and Anniversaries plus other important dates. It has worked fine in previous years using previous versions of iPhoto. In iPhoto 11, it only ever includes 1 event per day.
This also applies to Public Holidays
This is a major problem - the Calendar are unusable as it stands. It needs to fixed quickly as this is the time of year people buy their Calendars.

Recruitment: Multiple Actions on the same day

Hi expert,
Understand that in PA, we are able to perform multiple actions on the same day with the aid of Additional Actions infotype (0302).
However, in Recruitment module (i.e. PB), we are unable to perform the above, the previous action record will be deleted, thus we can't keep track of the actions taken.
Can we extend the use of Additional action infotype to Recruitment (PB db) ? or is there other way to perform multiple actions on the same day in Recruitment ?
All advises are appreciated.
cheers,
Sophie Tran.

Hi,
Please check the below link for that..
http://sap.ittoolbox.com//groups/technical-functional/sap-hr/recruitment-multiple-actions-on-the-same-day-384674
Thanks & Regards,
Sandip Biswas

CUOM 2.3 sends multiple notifications for Event StoppedGSUPerformancePolling with same time stamps

Hi Alll,
I have a CUOM Version 2.3 which shows mutiple notifications per Device for Event StoppedGSUPerformancePolling with same time stamps. The message below is generated from the default All_Events for all devices.
Does anyone have a solution for that.
Regards Michael
This message is generated 8 times with the same time stamp in all messages.
** This message is generated from Cisco Unified Operations Manager **
ALERT ID                = 00012OW
CREATION TIME           = Sat 30-Oct-2010 16:31:57 CEST
MODIFIED TIME           = Sat 30-Oct-2010 17:00:58 CEST
STATUS                  = Active
SEVERITY                = Critical
MANAGED OBJECT          = 183.201.141.193
MANAGED OBJECT TYPE     = VoiceGateway
ASSOCIATED EVENTS       =
    Cleared:183.201.141.193:Unresponsive
    Active:183.201.141.193:StoppedGsuPerformancePolling
CUSTOMER IDENTIFICATION = Voice Port
CUSTOMER REVISION       = Voice Port

if you get SNMP timeout on multiple devices then the fault usually lies in the path that the polling follows to get to these devices and back to the server.
The problem obviously lies in the part path they have in common.
It is not unusual to see the highest backbone loads during the night, due to backups being taken.
Make sure the most important inter-switch links have no errors.
I would rather fix this then turn off alerting.
Cheers,
Michel

ICal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

iCal has dropped a monthly event for the previous four months....... why did it disappear? and where is it? It was the same event but a different day each month.

I installed this same digitizer in my T|X some weeks ago. Some discussion of my experience may be found in this Usenet posting and subsequent thread.
The stock digitizer in my T|X had always had some significant alignment issues (for which PowerDigi was able to compensate very nicely) and sensitivity which was uneven, but which usually required a heavier touch than I liked.
Eventually, it began to develop a “dead spot” near the upper left. My T|X was under warranty, so I probably ought to have sent it in to Palm to be repaired, but I wasn't willing to be without it for the required amount of time, and I've heard enough reports of other T|X owners getting unsatisfactory results this way. I'd heard enough good reports about the PDAPARTS.COm digitizer, that I decided that the only acceptable way to repair my T|X would be to install one of those.
After however many weeks it has been, I am still very pleased with the results. It continues to work flawlessly; it is much more sensitive, so it doesn't require nearly so heavy a touch, and I very much like the hard feel that it has, compared to the spongier feel of the stock digitizer.
My wife's T|X still has its stock digitizer, and it has so far not shown any of the same problems that mine did, or for which the T|X has become notorious, but the feel is noticeably inferior. She's content with it the way it is, but I think that if I were to ever buy another T|X for myself, I wouldn't wait for the stock digitizer to fail. The PDAPARTS.COM digitizer is simply superior in every imaginable way; and, in my opinion, a T|X with the PDAPARTS.COM digitizer installed is sufficiently superior to one with the stock digitizer (even if it isn't defective) to be very much worth the expense and trouble of installing it.
Post relates to: Palm TX

Prevent multiple personnel actions being performed on the same day

Hi Experts,
Does anyone know if it is possible to prevent multiple personnel actions from being performed on the same day even where the action does not change the status of the employee?
Regards,
Janet

Hi Janet,
i mean to say if you activate the additional action then only the second action on the same day gets stored in to the IT-0302.
if you dont activate additional actions then if you run the second action on same day it will over write the existing record and gives warning message that this record over write the existing record.
so here the point is if additional actions is activated then only system allows you to perform the second action on same day..
other wise it will replace the existing record.
if you want to prevent the additional actions to be prevented even after activating it --i think its not possible because the functionality of the IT 0302 is to save more than one record.
yes you can restrict the to perform the action through authorizations
hope it is clear
regards,
mohammed

Upload client data to task server multiple times in same day

I am just getting started setting up the task server piece of ARD. My task server is an Xserve(PowerPC 10.4) and my client computers are mostly eMacs running 10.4. My client computers are all running Deep Freeze by Faronics which causes the hard drive to be restored to it's original state after a restart.
My question is - where does the report information about the client computer get stored before it is uploaded to the task server. Is it cached on the local client machine? My concern is that if the client computers don't upload their data until the end of the day and a student restarts a computer during the day we won't have a whole day of data recorded for that machine.
If this is the case, is there any way to upload the data to the task server multiple times in the same day?
Thanks!

I am collecting User History and Application Usage. Where is the cache stored - on the local client machine or on the task server? If it's stored on the local machine and one of the students restarts the computer the data will be gone because of the Deep Freeze program. That's why I'm trying to figure out a way to upload the data multiple times throughout the day.
I'm hoping that the data is cached on the task server so that I don't have to try to upload multiple times.

My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

Posted this before I realised there is an update for the iPhoto app 9.1.3 which sorts the problem.

Can I set multiple events at the same time to repeat on iCal?

I know I can do this by manually selecting each one of them and setting it to repeat.
But it's a pain and it doesn't make sense not to be able to edit more than one event at the same time.
When I want to set up my weekly schedule I do it for one week and I want to be able to select all the events in that week and set all of them to repeat weekly at once.

There are editors that bring up the songs one at a time, so you can edit them in a row. Winamp works that way. iTunes does not.

Multiple life events on a same day

Similar Messages

Maybe you are looking for