MuVo V200 not detected on

And I have on the screen this message "file sistem error" then it shut down
I try to connect on usb but my computer did not detect this hardware so i could not format or do anything Pls i'm desperate HElp me I have this device for only a day andnow is not working .... I try to restore with your soft MuVoV200_PCFW_L4__0_03 but it still doesn't detect MuVo V200 then I think my usb is broken and I went to a friend and try there...same result then I try to laptop Brand Averateg and get the same result **bleep**... It must have a problem but I could not understand what...Please if you can help me with any advice deosn't matter how complicated I will try to submit your indication...Many Thanks in Advance

Hi there.. encountered the same problem also. And I've got a solution from creative techinical support and it works..
http://us.creative.com/support/kb/ar...p?l=3&sid=4656
Cheers,
Eunoshishi

Similar Messages

Muvo V200 not supported anymo

H to all and Happy Christmas :-),
I've just received a Muvo V200 Gbyte for present. I haven't seen it on the page. I've seen the Muvo N200 which looks similar but with more features. Is the Muvo N200 similar to the V200 or have I received a procuct which is not going to be updated in the future :-/?. If the Muvo V200 is similar to the N200 I presume the firmware will be nearly the same, Am I wrong?
Thanks :-)

The two products are very similar (they were both launched around the same time), just with a slightly different feature set. More detail here.
Only Creative know what the plans are for each player in terms of updates.

Micro Muvo not detected on comuter.

Can anyone please help. I bought my Micro muvo N200 back in late October. I am a novice computer user. I had finally downloaded music onto it after tries from "musicmatch". For some reason now, I want to delete songs from my MP3 and add new one's but now my MP3 is not "detected". I've tried everything to the best of my knowledge and nothing..
Please help.
Albert

Thanks for the response... well the actual mp3 works great. the problem is that my computer or music match do not detect it even after downloading the disc again. I was told to go to control panel, systems, hardware, then to usb... to see if the computer detects it, when i did that there were several usb ports... but there was a particular one where the USB symbol actually had a red "X" going through it as if to say that it's not working. I also tried to download the firmware on the creative website and the response i got was " This device not connected to the USB port" I tried to download unplugged and plugged (the mp3) Thanks for your response and hope to hear from you VERY soon. (tired of dealing with this.. very frustrating )

My Muvo V200 Does Not Star

Hi I am a computer developer and an expert Programmer, I Wanted to Upgrade My MP3 Player's firmware but my computer went off in the middle!! then my mp3 player turned off and now it is not getting recognized by the computer and i can not turn it on! if there is any maintainance program which can force my player to freshen it's program tell me so.
AND ABOUT THAT FIRST REPLY:
But, I AM NOT A NORMAL USER!!!! I AM AN EXPERT PROGRAMMER!! and i know a lot about these stuff! just if there is a cure tell me! Somebody else have got this either and he has a note:
"I once had a similar problem with my <FONT color=#cc0000>Creative MuVo V200 Flash MP3 Player. It worked, but I chose to "upgrade" its firmware and due to a bad USB connection it wouldn't boot up later. It didn't even show up as a USB storage device when connected."
Looks like his problem has been fixed! Please help me! i need help instantly, because i need my player now.
Message Edited by arpanah on 0-30-2006 02:45 PM

If the firmware download was interrupted unfortunately the only way to fix the player is directly reprogramming the ROM, which is beyond what a user can do. You'll most likely have to pay for Creative to repair the player.

Help!! Dead MuVo V200

I recently brought MuVo V200 G
And I have on the screen this message "file sis eror" then it shut down
I try to connect on usb but my computer did not detect this hardware
so i could not format or do anything
Then I try on laptop and...nothing same result (
Pls i'm desperate HElp me I have this device for only a day and
now is not working ....
Any sugestion is good PLESE

go back to the shop and get a new one, I think I read somwehere that you can get a new unit free of charge within a certain amount of time from day of purchase, might be mistaken though.

The MuVo V200 beltclip is a joke, Now I have no player. What Can I

Hello all, I'm very disappointed with the Muvo V200 Beltclip. I have had my Muvo since the 9th Jan 2005 and have been using it all the time and had no problems with it what so ever. But yesterday I had taken my player out with me. I had it connected to the beltclip as always. I had taken my headphones out of my ears when I was asking some bloke a question and did not but them back in till about 0 minutes later. When I put them back in I went to turn my player on, But I could not feel it, I look on my belt and all that was there was the dark grey clip that held the player to the belt. I still had the head phones but they must unplugged when the player fell. I retraced my steps but I had no luck finding my player.
All I have now are the Headphones and a dark grey clip, But looking at the dark grey clip there is a hole at the back, which I think something should have been there.
So as you can imagine, I'm very disappointed. What I would like to ask is, Is the loss of my player covered by the English Warranty?
Because I do believe the Beltclip had failed, letting the player fall from my belt. I done my best to find it, but as I said, to no luck.
All thats left now is the part of the clip and the headphones.
<IMG height=295 src="http://thegooddrmartin.co.uk/images/image.jpg" width=35>
sorry for the poor pic (taken on my phone)Message Edited by DrMartin on 04-04-2005 0:42 AM

On the day it happened I was wearing a shirt that covered the top part of my jeans, So only the headphones would have let people know Im carrying a player, If someone was to take it, the only way to remove it would be to lift it, but I still had the clip part of the holder. If someone did take it by ripping it off I would have known about it.
Ok as for it not disconnecting from the headphones I don't know, My headphones did not fall with it, and I did not feel it falling. What I do know is that I have lost my gig V200.
I will phone Creative first thing Monday, But what I was looking for here was someone who might have had the same thing happen with the V200 or another MP3 player, and did the Warranty cover it's

A Problem With Muvo V200 !!

Hi everybody, I've bought a Muvo V200 GB, and it works well , less one thing:
When the blue light is activated I feel a very "high-pitched" sound, and it's very unpleasant.
Can somebody tell me if there is a firmware that fix that problem ?
I've tried to format the usb flash but I still have this problem. And I've also seen some posts in other forums that complain about that.

No, the problem is with the V200 hardware itself, not the headphones. But using a higher impedance phone results in this high frequency noise being greatly attenuated. Being a hardware issue, there is no possible firmware fix for this. The only option is to go to a higher impedance phone (the Koss KSC-75 sounds great and is available for $5 from amazon.com) or li've with the problem. You can of course set the player to have the backlight always off - this will also eliminate the problem except at startup but will make adjustments more difficult in the dark.

MUVO V200 Help Required

Hi,
I recently purchased a MUVO V200 with 52 mb memory.
My first problem was the FM radio would not work, but I have since put this down to it requiring more power from the batteries than standard music. Bit of a pain as my rechargable batteries, even when fully charged won't allow the FM radio to work. Is this normal?
My main problem; is since reformating the dri've and loading new firmware, the player will only store 00 songs, the packaging advises 256 songs. Can anyone explain if there is anything I can do to enable me to load more songs.
Any advice would be appreciated.
Thanks
James

I have Uniross 770mAh, Energizer 850mAh and Hahnel 900mAh, all .2V and all work fine.
You can convert the files you have to a different bit-rate using the Audio Converter function of MediaSource that came with your player. If you use MediaSource to rip your CDs then you can set it up to rip at a lower bit-rate right from the start.
MediaSource and V200 Media Explorer also have a SmartFit function where the files can be reduced in size as you transfer them to your player, though this slows down the transfer process and you would have to do it again if you reloaded the same files again at a later date.
If these are files from an online music store then you probably can't convert them directly because of the license issues, but you can burn them to an audio CD then re-rip them at a lower bit-rate. If you use a CD-RW then you don't end up wasting a load of CD-Rs.
PB
Message Edited by PeeBee on 0-27-2006 05:09 PM

MUVO V200 - Disk Drive is F

I am having a problem with the disk space of my Muvo V200.
The capacity is GB but yesterday when I tried to copy 600MB of mp3 files I got the message that disk dri've is full.
The player was empty. I formatted it but there was still the same problem. There was not any hidden file in my player of in the files that I tried to copy.
I am starting to copy the files and when I receive this message I go to the properties and it says that I have USED SPACE:540MB and FREE SPACE:453MB.
Despite that I cannot copy all my files.
Does anyone knows wht is going on?
Thank you.
ArisMessage Edited by aris on 0-3-2006 07:34 AMMessage Edited by aris on 0-3-2006 07:35 AM

Please read the FAQ - this is covered there.
PB

Muvo V200 Starts up for one second and then shuts do

Hi,
I bought my Muvo V200 two weeks ago and was delighted with the quality. Yesterday I went to use it and it starts up to reveal the Creative logo and then shuts down straight away. Now the computer wont recognise it either (although a graphic does appear on the muvo screen saying that it is connected to the computer). Ive tried updating the firmware but the installer gets errors. What do I do?

Other people have had the same trouble so I don't think it's because you're in an Internet cafe, but it would be better if you had access to a PC that you could install the drivers onto. Without them you can't get into Recovery Mode.
Perhaps someone in the Internet cafe would logon as an Admin for you so that you could load the drivers and carry out the firmware reload?
Have you not got access to another PC?
PB

Nokia XL not detected by pc after update 1.2.3.1

I recently updated my nokia xl to software version to 1.2.3.1. But now it is not detected by the PC. It was working fine before the update. I tried reinstalling the usb driver according to the instructions available at http://developer.nokia.com/resources/library/nokia-x/getting-started/device-setup.html. But now the mesage shown in the following picture comes up. After doing some search I found few cases where the same problem exists. Buy none of the solutions worked out for me. please help me
ps: I'm using windows 8 OS
Attachments:
Capture.JPG ‏33 KB

Hi.. have you tried removing the PCS & NSU and then updating your XP to SP3?
Try that and then reinstall the PCS & NSU and it should work fine.. I had this issue a few times on the 5310 I had also under the USB option in settings try setting the option to PC suite and then turn ask on connect to off this tells the phone only to connect in PC suite mode and will not prompt you on connecting the CA-101 Cable
Hope this helps
Jonas
Current Device; Nokia E71-1 F/W v200.21.118
Past Devices; Nokia 6220 Classic.. Nokia 6500 Slide.. Nokia 5310 Xpress Music.. Nokia E65.. Nokia 6230i & Many Many More!

MuVo V200 C

My MuVo V200 just broke and now I see that there the one part is only fixed on _three very little_ points to the other part (I'm talking about the frontside and backside of the player/stick part). Do you have an explanation for this?!
I'm really disappointed!
Yours
nightwolf

Anyway has this question ever been answered... ? I doubt anyone from creative is assigned to watch this column... ? right Creative ?
I am having a similar experience in nature... my daughter realised that her v200 had a 'Crocodile Mouth" at one side, upon curious which I am glad relected from a "Teen', she realised that the mouth can easily be stretched quite wide, afraid that it may conveniently allows water entry, she had called Tech Support, replied is to bring the device to them for review.
I believe she "WAS' glad when they said so, but all is changed now as she had came to understand that nothing bought can be returned easily... they first conveniently claim that she might had dropped (as she honestly admitted she did dropped it once) and blamed the splitting mouth to the droppage... I had later phoned in to clarify that the incident occurred in my carpetted office location...
Then they suggested that they are willing to let her purchase a brand new set after taking back her ex v200 @ $45.00.. I later called them to explain my mathematical understanding that to take my device and topped up $45.00 means to say they are taking my device back, recondition it and sell it brand new while still making another $45.00 from me (The Sucker).. They then say that it is for documentation fees instead.. I then suggest looking at their warrantee obligation to us which was published publicly.. they argue that there are small prints that they are unable to show to public with regards to qualification to an exchange for faulty equipment, I requested but Creative had conveniently declined...
Anyway, I do not wish to create an issue over a PEANUT matter.. I would like to suggest that Creative at least publish clauses accordingly in order to educate users on the gray area of your warrantees... Service center was busy when my daughter visited in the afternoon... your staff should be more professional as my matter took 4 hours to conclude...
Very interestingly, Creative had took my device in for "FORENSIC" investigation, this is to prove that the device had came to this state under abnormal usage... this of cos will not be immediate as expected...
I will await patiently as I think the Technical Support had lost total cool in handling the matter when she starts leaving behind her name "Huitin" and Serial Number "05xxxx" and telling me to file official complaint if I am not happy with the handling methods.. maybe good professional staffs are really difiicult to come by...

Zen MuVo V200 problem

My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
Sorry to be of a nuisance again, but is there anything that I can do?
Thanks again,
Vanessa.

plum_juice0 wrote:
My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
Sorry to be of a nuisance again, but is there anything that I can do?
Thanks again,
Vanessa.
As SSR has said, the PC Music Library error is a MediaSource problem.
The reason that you haven't managed to fill up your player is covered in SSR's FAQ post. Look for a section titled "I can't seem to fit any more files on my flash player yet I have free space, why?".
PB

My MuVo V200 doom

so here is the thing:
i bought my muvo v200 maybe few years ago and it has been working perfectly since it started to have problems connecting with my pc. it couldnt kinda connect with the pc. when i put it into my usb port the sound of "new device connected" played and right after it the sound of the device is unplugged and again connect/disconnect sound and it keeps doing that as long as the stick is put into the usb port.
so when it was doing that first time the problem disappeared eventually. but now the problem appeared again and it wouldnt disappear. so i read about the recovery device and tried to do the things mentioned in that post, even more problems appeared. before that event i was able to listen music with the player but couldnt connect it with my pc. now, when i tried to flash the new firmware on it there was an error which said something about timeout during the update and then the update was cancelled.
well there was that text blinking that do not disconnect the device during update, and then the error came so it kinda disconnected it during the update. now i cannot even put it on anymore, so i cannot listen to music anymore with my muvo .
i've tried to connect it with my second computer which just have been formatted and windwos has been reinstalled on it. same problem there with connecting and updating.
even my computer's bios displays that 4 usb devices are connected, and when i put muvo to the usb port it shows 5 devices connected, and after a few seconds it shows 4 and again 5 and so on...
is there anything i could do or is my player completely doomed?

If the firmware download was interrupted unfortunately the only way to fix the player is directly reprogramming the ROM, which is beyond what a user can do. You'll most likely have to pay for Creative to repair the player.

Zen Stone Plus not detected by software - GRRRRR

Hello all
A month ago I bought the Creative Zen Stone Plus.
I was quite happy to go with Creative because I had been the happy owner of a Creative MuVo player for a few years. The MuVo was remarkably straightforward to use. The only problems I experienced were occasionnal freezes of the software during file transfer. Nothing major. I lost count of the number of times I recommended this product to others, usually as a cheaper but just as good alternati've to the iPod.
However, I am beginning to have serious doubts about Creative.
This is the problem:
- The player cannot be seen in Creative Media Lite.
- In Devices Manager, "Creative Zen Stone Plus" appears under devices category "Other devices" and has a yellow question mark next to it.
In other words, I have had the Zen Stone Plus for a month and it has never worked !
From my exchanges with Technical Support (email) and from the knowledge base (eg # 9287,
and 4782) and from this forum, I have tried several things such as
- deinstalling (actually rolling back) then reinstalling Windows Media Player (to get MTP drivers installed)
- downloading the Iomega patch
- I downloaded the player recovery tool (the one with the red button) but when I click on it, I get the message "Player not detected. Do you want to retry"
I found two dead ends in the technical support articles I read:
- I decided to make changes to the registry, as one article suggested that the problem may be due to USB permissions. So I typed 'regedit' but the compuer would not accept this command.
- I also decided that I would change the firmware, as another article suggested. How on earth do I do this. I downloaded the firmware for my player but I do not know how to enter the Recovery Mode. It is not clear from the Recovery page (KB ID # 4794) whether my device is 'ZEN' or a 'Zen Series'. I treid the procedure for both and neither worked !
I'm beginning to feel like I've wasted my money. I had been thinking about buying a Creative player for my sister and also a friend. Now I won't bother, even if this problem is solved. I consider myself to be IT literate but how does Creative expect technically illiterate people to cope with its products !
Can anyone help me to make the Zen Stone Plus work? Otherwise, I'll consider it to be a **bleep** Stone and flush it down the toilet, where it belongs.
Andy
Message Edited by Andy7504 on 03-5-2008 08:2 PM **It should be obvious that if the forum blocked a word, you're not allowed to use it. Please refrain from cursing in the future. Dale-CL
Message Edited by Dale-CL on <span class='local-date'> 03-5-2008<span class='local-time'> 04:45 PM

-. Hello Seb_tokyo,
Welcome to Creative forums!
When you plug in the ZEN stone, your device manager list should refresh. Besides under USB controllers, did it detect anything when you plug it's You can also try the following:
.) Unplug/replug the USB cable and connect it to the rear USB port instead of using front ports.
2.) If you have another USB cable, try using a different one and see if it works.

MuVo V200 not detected on

Similar Messages

Maybe you are looking for