My account balance does not reflect the redeemed B...

I redeemed two Bing Rewards Vouchers, and each worths $1.46 (total $2.92).  However, I do not see the amount reflected in my balance.  I have original balance of $9.92 which does not change at all after I redeem these vouchers.  Please help.  Thank you.

SJC9468 wrote:
I redeemed two Bing Rewards Vouchers, and each worths $1.46 (total $2.92).  However, I do not see the amount reflected in my balance.  I have original balance of $9.92 which does not change at all after I redeem these vouchers.  Please help.  Thank you.
Hello
Did the vouchers have an expiry date?
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

  • IPone 6, iOs 8.1.2 when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

    when removing the phone from the charging does not reflect the increase in the percent charge level , by reconnecting displays correctly

    Addendum
    Last night charging for around 3-4 hours only charged a dead phone by 55% then left it to charge overnight
    Today the battery dropped from 6:15 am full charge to 53% at 10:38 am at time of writing this with
    1 phone call out for 30 secs
    1 incoming missed call,
    Whatsapp fetched around 10 msgs
    Email fetched around 20 ermail from 4 accounts but not viewed yet on phone

  • Output error:the name of the package "greet" does not reflect the location of this file...

    output error: The name of package 'greet' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file. C:\Documents and Settings\Igal\My Documents\meiran\greet\Greeter.as
    I keep on recieving this output error although my source path is set to C:\Documents and Settings\Igal\My Documents\meiran\greet.
    any suggestions why this happens?

    The classpaths you define in your Flash software tell the compiler where to look when it needs to find a class.  According to your as file, the very top line indicates the Greeter.as file should be at a location specified by the path...
    one-of-your-classpaths\com\example\quickstart\
    So if one of your classpaths is:  C:\Documents and Settings\Igal\My Documents\meiran\greet\
    and you placed the file in the greet folder, then in your AS document you should not have the "com\example\quickstart" and your import statement in the fla should not be using that (should just be... import Greeter;)

  • What does your account type does not support the view account feature mean?

    What does your account type does not support the view account feature mean?

    In reference to what? Where are you seeing this message - iTunes? Do you use a credit card for purchases in iTunes or do you download only free content?

  • I have iMove 11 and photos turn very dark when I drag  them into the project. Changing colour white balance does not fix the problem.

    I have iMove 11 and photos turn very dark when I drag  them into the project. Changing colour white balance does not fix the problem.

    Thanks for your no help line.

  • Archiving mail on mobile does not reflect the archived state on Mail.app - it stays in "Inbox"

    I am using the latest MacBook Pro on the latest Mavericks. The rest of Mail.app seems to work fine, but I have this very annoying problem.
    I use multiple devices for email - my iPad, my Android phone, etc. The whole point of IMAP is that you can do this, without issues.
    When I archive a message on mobile, it does not reflect as archived on Mail.app, no matter how many times I restart Mail.app. I even took it offline, then back online a few times.
    This is specifically for gmail and Google Apps email accounts. Any ideas?
    thanks
    Amit

    Same problem here.
    I have several imap email accounts. They are different. Some are Gmail, some iCloud, some custom, etc...
    When I archive, reply, delete, etc... emails on my Mac using Mail.app, they reflect on the iPhone. But when I do the same on the iPhone and get back to the computer, they don't reflect that way on Mail.app
    I miss Mail.app that was in Mountain Lion. I didn't have this problem before.

  • My bill does not reflect the conversation I had with two representatives.

    When I phoned to suspend service because I would be out of the country until the end of September, I asked two representatives on the two occasions I phoned to calculate what my charges would be for May.  I was given a rough figure of $60 with the understanding that because Verizon bills are paid in advance, I would be only charged for a prorated amount for the days following my billing cycle renewal (the 29th) and the date suspension was to commence (5/1) plus $45 for the three lines being suspended.  Instead, my bill reflects full charges adding up to $143+ as if I were using the service for the projected month (4/29-5/28).  Can you explain?  Please review those recorded phone conversations with your representatives for clarity.
    Joanne
    I cannot at this point phone as I've not yet sorted out phone service while in the UK.  Thank you.
    Private info removed as required by the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

    As it seemed to take a long time for an email reply to my inquiry, I phoned
    Verizon and worked out that it was case #2, that the bill had been generated
    before the suspension.  I've opted to pay it in full and leave a credit on
    my account as of June when the adjustments are made.
    BUT I have one more question:  when I spoke with the representative to get
    the above clarification, she mentioned that I would need to contact Verizon
    on or before 29 July to generate another suspension until my return to the
    USA on 29 September.  But as I recall from my conversation with the agent to
    set up the suspension, a note was made in my file that this suspension order
    was to automatically renew saving me the need for a call or internet action
    on my part.  Can you look into that please as I will be traveling likely
    without my computer or phone between 25 July and mid-first week of August to
    Finland and it will be awkward to renew the suspension order that way.  If
    I've misunderstood and do, in fact, need to contact Verizon at the end of
    July, might the order for renewal of the suspension be earlier than the
    29th; say on the 24th or 25th?
    Thank you,
    Joanne  (gunniejo)
    please reply to my yahoo account (removed) as I almost never
    use the google email account.
    Private info removed as required by the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

  • Report data  does not reflect the SQL Query?

    Hi,
    I have a report which does not seem to be processing all records returned from the database. When I run the SQL Query produced by crystal manually against the SQL Server all data is returned correctly in crystal not. Does this mean my links are not set up correctly in the Database Expert? or is there another issue, I use a Crystal Syntax selection formulae which is based on a couple of paramters to filter the database records.
    Help is appreciated
    K

    <p>I agree with Rahul on checking the record count on the report vs. the record count from the query.  Conditional suppression and Group selection formula will hide records that are actually being returned.</p><p>It sounds like (from your question) that you are using the database linking expert in CR.  You can also check the SQL that CR is sending by going to Database -> Show SQL Query... compare this with the query you are using for validation, this will give you some clues as to whether your linking structure has an issue. </p>

  • Mail and pop accounts - mail does not retrieve the new messages

    Hi, for any reason for last two days my mail application is not able to retrieve my e-mails from my pop account. However I can read and reply the e-mails through the web portal.
    Mail.app seems to connect properly to the pop account but it is not able to sync the messages.
    Have you ever seem this behaviour?
    Miguel

    Miguel,
    Welcome to the Discussions.
    Is there any symbol beside the mailboxes of this account? Have you checked to see if the account is Offline? This is different than not be connected, since in Mail each account can separately be taken offline. Click on Mailbox in the Menubar, and check Online Status (available if two or more accounts) or if only one account, whether Go Online is black or Go Offline is black?
    Ernie

  • Exported PDF does not reflect the most recent changes to my inDesign document

    When I export a new PDF from inDesign after I have made multiple changes to the document the PDF looks like a previous version of my inDesign doc before the edits

    Delete the old PDF normally, empty the trash and export again. It happened to me last week several times that InDesign could not overwrite an existing PDF but did not claim an error. After deleting the old file, the problem was solved.

  • Photos not saved after sharpening and denoising-shows on screen correctly but when am trying to email it, does not reflect the changes?

    I have tried to change pic's like sharpen and de-noise features, on screen ot shows all perfect, but when I try to email them, all the changes are lost, anyone can help with the same?
    Thanks in advance.

    Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

  • Softphone or Physical Phone screen does not reflect the agent state

    Hi
    I have a problem with login with finesse API.
    When I login on UCCX by the physical phone or softphone keyboard, the screen on the device changes, and show me options for exampe to change state, but when I loggin with finesse the device screen dont changes.
    However when I loggin with EMAPI the device shows ok the screen information.
    Any Ideas?
    Best Regards Kandy

    drop the CAPS thats rude.
    iforgot.apple.com there is a link for find my apple id click here
    https://iforgot.apple.com/appleid?language=US-EN&returnURL=https://appleid.apple .com/cgi-bin/WebObjects/MyAppleId.woa&app_id=93&app_type=ext
    Peace, Clyde

  • HT4519 how do i delete an email account? The one i want to delete is the only account that does not have a "delete" red bar??

    I have 6 email accounts on my iPhone 6 and want to delete one that is set up incorrectly. It is the only account that does not have the red DELETE bar...what do i need to do to delete it?
    It is hosted by GoDaddy, is this the problem?

    Thank you so very much! That was just what I needed to do, problem solved.

  • Business area does not reflecting in IT 0001

    Dear Expert,
    I have assign cost center to organization unit, then hire employee through PA40, so position assign into IT0001,
    system pick up the cost center but does not reflecting the business area in infotype 0001.
    i checked with FI consultant, there is proper intergation between cost center and business area.
    Please tell me, how to resolved this issue.
    Many Many Thanks
    Urvashi 

    Hi Urvashi,
    You will get the  Default values for Company code, Personal area, Personal Sub Area and Business Area  because of Account assignment infotype - IT1008 - for your position or Org Unit
    check from PO10 or PO13 and infotype 1008.
    You will have PA value defaulted on IT 0000 screen and others defaulted on IT 0001 screen.
    You can change these values on respective screens. A warning will be issued but you can overwrite them.
    Regards,
    HARANATH

  • URGENT:- HFM 9.3.1 Workspace does not show the Studio changes

    Hi All,
    I am trying to make changes in a report in Hyperion Reporting Studio. After saving the Report in Studio if ran in the web i.e Hyperion Workspace, then it does not reflect the changes.
    This is only occurring for this particular report. Also checked the Database Connection and other connectivity i.e Server Connections, its all fine.
    Please suggest me what can be the possible problems which is not reflecting the changes in the Workspace and also the solutions for it.
    Your suggestions are cordially invited.
    Regards,
    SN

    Hi,
    Although you've created the Spreadsheet & Pinboard, I don't think Pinboard functionality would work unless you've created, associated & assigned limits for a Traffic Light column before configuring the Pinboard.
    Most likely, I believe- You might've not set the limits that encompasses all the ranges/colors.
    Let me know incase you've any questions!
    - Natesh

Maybe you are looking for

  • Not getting delta master data after refresh

    Hello, We have just refreshed our QA (BW and R/3) environments from our production environments.  It was a synchronized restore.  We have done this multiple times in the past and have not run into this problem before. Everything checks out fine - ful

  • Selecting a single column in SQL

    Hi all, I am doign a Java application at the moment and I need to select only a single column in a row of a table. I know that I can do something like SELECT column_name FROM table but the fact is, I am not supposed to know the name of the column, bu

  • Can't get HP309a wireless scanner to work

    I recently upgraded to Lion, and now I find my HP309a series wireless all-in-one won't scan, either by using the buttons on the scanner itself, or by using Preview or Print/Scan on my Mac. The best I can get is "no document loaded" although of course

  • Object type with constructor gets PLS-00307 (10g)

    Hi all, I have the following code, and I am getting the following error. I want to have a constructor that can be called without specifying the parameters by name. Is that not possible? What am I doing wrong? Thanks! Error:Error at line 50 ORA-06550:

  • How do I start all over?

    Prior to upgrading to Leopard I used Super Duper for backups. I particularly liked the ability to boot directly to the backup. In case of a HD failure this is priceless; You're back up in the time it takes to reboot. When I upgraded to Leopard, my in