My adminstration page for router shows only colors no print,what to do

I have tried for 3 days to get in to my wrt54g v5 router page at 192.168.1.1 to change some things.What is wrong.I have Easy link installed because I could not get it hooked up without it.

As per your message it seems that routers set up page is not fully loaded ........
Disable the firewall & antivirus software on computer ....
Again try to open the set up page ..... & see if it is showing proper tabs or not.....

Similar Messages

  • Can I create a password protected page for member's only?

    Can I create a password protected page for member's only?

    PASSWORD PROTECTING A PAGE WITH A NICE BOX DESIGNED INTO YOUR PAGE
    FINALLY, I'VE FOUND AN ANSWER TO PASSWORDING A PAGE OR SECTION WITH ADOBE MUSE WITH GREAT SIMPLICITY AND ALLOWING YOU TO 'DESIGN' THE PASSWORD BOX INTO YOUR PAGE!!!
    Even better is that you don't HAVE to have username AND password (although you could if you wanted to), so just a simple PASSWORD box and enter button DESIGNED BY YOU WITHIN YOUR PAGE, rather than nasty popups etc.  Importantly, the password itself is NOT within the source code of your page either!!
    The solution is at Jotform.com. I believe you can do this with a FREE ACCOUNT, although it's SUCH a great service for Musers that I paid for a proper account.
    Before you do this, create a page on your site saying "Wrong Password. Please go away" or something to that effect. You'll need it for when they enter the wrong password.
    So, in Jotform, you just create a new form and:
    1. Drag on a password box (it's in the power tools section)
    2. Select it and go to Conditions
    3. Go to Change Thank You URL after submission
    4. Enter: If [name of your password box] field EQUALS TO [enter your password]
    5. In the "Then redirect to" box, enter the URL of your protected page and click save
    6. In the resulting box click "ADD A NEW CONDITION" and do the SAME as stets 3 to 5 but this time say NOT EQUALS TO" with your same password and in the "Then redirect to" box, enter the URL of your WRONG PASSWORD page and click save
    7. Embed the button on your page and you're done!!!
    If you want to mess about with the EXACT alignment of a right aligned button and text box, you can go to Preferences and in the box which allows you to add your own custom CSS, enter the following code and mess about with the values until it's perfect for you:
    .form-buttons-wrapper { padding-top:3px !important; }#id_2 {margin-left: -50px !important;}
    Here's an example, built in Muse: www.hileytv.com/about.html
    I hope this helps my fellow Musers!
    Marcus

  • Canon ir 2420 ufrii LT network printer show only processing but print not receive

    My Canon ir 2420 ufrii LT network printer show only processing but print not receive,i have check its ip and network all is fine i also relode this software but result is same , show only processing print not recieve ,please if you have any trick please share ,  Thaks for you support  

    I can't find that printer on the canon eu support website (canon uses model numbers on that site, not series designations) , and canon printers are not easy to get to work well on archlinux.
    However there are 2 aur packages that provide the UFRII driver :
    - cndrvcups-lb (built from source)
    - cndrvcups-lb-bin (uses the binaries)

  • How to Config Special Error Page for TIME OUT ONLY

    We can config our own error page for webdynpro applications by using
    transaction code SICF. thus the customizing error page will show when
    program meet some errors. these errors type include ABAP runtime
    dump/page time out etc.
    Here is my question, is there any configuration or enhancement can
    effect on ONLY ONE error type.which means the customizing error page
    shows only time out error occurred.for other errors show the standard
    error page.
    Thanks a lot for your help.

    I need to setup a situation, that is display a custom error page which say "under maintenance" if no back-end WebLogic Server instance reached.In the Apache HTTP Server v2.2 you can use the ErrorDocument directive: http://httpd.apache.org/docs/2.0/mod/core.html#errordocument
    For example in httpd.conf,
    ErrorDocument 503 /Test.html
    Test.html is placed in the DocumentRoot (http://httpd.apache.org/docs/2.0/mod/core.html#documentroot)
    Regards
    Fabian

  • Upgrading from Exchange 2003 Bridgehead servers to Exchange 2010 Transport Hub servers for routing SMTP only

    Our company moved from on-premises Exchange 2003 to Office365 and only have 4 Exchange 2003 servers on-prem that we use for Routing email from application servers to Office365. We need to migrate these servers to Exchange 2010 then to Exchange 2013 and
    only route email only. Is it possible to upgrade to Exchange 2010 by installing the transport Hub & Mailbox server options only? Our OAB and EWS services come from the CAS servers located on Office365 so we should not need a CAS server to set up Transport
    rules or route mail would we? Any assistance with this would be greatly appreciated! - Thanks, DWB
    Dave

    Since it is not internet facing we will not have to worry about configuring an Internet Domain Name when installing the first server, correct? in my planning I was going to
    install the Exchange 2010 CAS/Mailbox/Transport Hub roles on one server, then upgrade it to Exchange 2013. Once this is completed I'll then install the 2 mailbox role servers in one Datacenter, and 3 more in our DRP DC. If something happens to the
    primary Datacenter I would want it to fail over to the other site. For this I would have to install another CAS/mailbox server in the secondary DC. Would this plan sound about right? Since we moved to Office365 in 2010 I have not had a chance to deal with
    actual servers except for the Exchange 2003 servers we still have on-premises. Each of these are located in 4 Regional offices along with single Windows 2008 R2 servers using only the IIS SMTP service for routing mail from on-prem application servers
    and print/scanners which email back to the users. The plan is to move to a routing system which will provide both MTA and redundancy if one has an issue.
    Dave

  • Why doesn't the text boxes in Pages for iPad show the arrows to link the Boxes together?

    Hi. I am using Pages, which I love, on my iPad.
    As a perfectionist, I would like all my textboxes to be linked so that if I move one I can move them all.
    Any suggestions? 
    When I tap on the boxes I don't have the arrows appear like you would on a Mac.

    Yes sorry about that Rachel. I don't have an iPad so can't explore for the iOS options.
    There is a separate Pages for iOS forum where they may be able to give practical assistance.
    https://discussions.apple.com/community/app_store/iwork_for_ios
    Peter

  • Looking for recommendations for a good small color laser printer

    My trusty Canon inkjet is on its last legs and I am considering getting a color laser printer.
    I need it to have ethernet so all computers on my home LAN can print to it.
    I am currently looking at the Samsung CPL-315W and the HP Color LaserJet CP1518ni Printer.
    Pros: Samsung is smaller than the HP
    Samsung toner is cheaper
    HP print quality is rumored to be better
    Cons:
    Samsung toner is more difficult to find locally
    HP printer is more expensive ($309 compared to $199)
    If you have any advice or experience with these printers, I would appreciate it.
    Chris
    Austin, TX

    hi cejones,
    Did you end up finding a printer?
    I'm looking as well. I have the Samsung clp-510 and while it's very reliable, the UI for mac is terrible. So terrible in fact that I still have it connected to a PC b/c their UI is much better for controlling colour etc..
    i'm looking for a wireless solution.
    Cheers

  • Show only colors already used in the document?

    Hi!
    Is it possiblé to see somewhere which colors I have previously used while working with a document? I think it would be nice to have the option for example for the swatches panel to only show user selected colors so that I can go back and forth in my 6-10 color palette really fast. It would be kind of a "color history". Is this possible to achieve somehow?

    Image --> Mode --> Indexed color, then use the options to save and edit palettes...
    Mylenium

  • Auto Refresh OBI Page for Current Day Only

    Hello Guru's
    I have a obiee page which needs to get refreshed every 30 seconds . I could able to do that using <META HTTP-EQUIV = "REFRESH" CONTENT = "30"> . But the triggy part is , auto refresh needs to be applied only for current day and not for any date range selected by user .
    Details :
    Prompts are defaulted to current date and time on the page, but user can also select date ranges as well . So the setting for auto refresh needs to apply only on current date (default prompt values) and not if the the user select data range .
    let me know if any of you guys have come across such .

    Check the below link and tweak it if needed.
    http://www.cool-bi.com/Customize/AutoRefresh.php
    Appreciate if you mark as correct :)
    Let me know for issues
    Edited by: Srini VEERAVALLI on Jan 4, 2013 10:46 AM

  • Multi-page pdf documents show only the first page in safari

    I suspect QT is the culprit, when I right-click the page and click About QT Plugin... nothing happens, when I then click the page [plugin failure] button shows up.
    I have QT and QT7 Pro installed on my machine running OS X 10.6.8

    You need to maintain the relative folder structure that was used when the links were created. For example, the first link in the catalog list (0.1A 3SH Standard), is pointing to a file called "TOC-01a.pdf" that is in a sub-folder called "0.1A" under the folder where the main PDF is located.
    You should really try to get the entire thing as a zip file, or have the creators of the PDF change their links to ones that point to URLs, or you'll need to spend a lot of time on re-creating the folder structure for all the links in this file (which you don't have access to unless you have Acrobat, anyway)...

  • Tabs for bookmarks showing only background frame

    I have folders created in bookmark banner. When I click on the folder I can see only border frame, not the content. It happens from time to time. When I close firefox I open again, everything again working correctly (screenshot available).

    You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can try to check and repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • You are not authorized to page for Create button only

    Background fact: we just updated to APEX 3.2.
    I have an existing page that works fine with a report region that you can edit or click on a button to add a new record on a new page.
    I attempted to add a region with a tabular form region. When I attempted to add my first record in a new table (no existing records) I got the message that "You are not authorized to page!". Since I had to add yet another editable region, I decided to just put 2 report regions on the existing page instead of using the tabular form. I did so, and all works well until I click on the Add buttons (either one of the 2 new buttons associated with the 2 new report regions). When I click on these buttons, I STILL get the "You are not authorized to page!" error. The edit works fine.
    I checked the security on the old page, and it is set up with no authorization scheme, authentication: Page requires authentication, and Form Auto Complete On.
    The new pages are set up the same way.
    I don't understand why one region would work and the other, new regions won't. Could it have something to do with the upgrade?
    I hope you have some suggestions.
    TIA,
    Deb

    Export the application and look for "You are not authorized to page!" in the file. That will tell you where the message is coming from.
    Scott

  • Why is the podcast for our show only streaming/downloading half of episode?

    Our podcasts on occasion have been having an issue when uploading/linking to the store.  On a weekly basis we upload video and audio podcasts through the linking of our RSS feed (Feedburner) and also utilizing the Blubrry Powerpress plugin.  On our site and server both the video and audio files are in their entirety, but upon being posted in the iTunes store they are sometimes being presented at a shortened length.  This morning our video and audio were fine on our site, but on the iTunes store the audio stream was cut at 30 minutes (the podcast should be 1hr 15min).  Somehow though, the video stream on iTunes is up in its entirety without issue.
    We would love to stop this from happening! Any ideas?
    Thanks,
    Brad

    Here's the iTunes link as well:
    https://itunes.apple.com/us/podcast/animation-fascination/id528946729?mt=2&ign-m pt=uo%3D4

  • I am having trouble printing to an Epson XP600.  It is a new printer and it has been replaced because we thought it was the printer.  Basically, when I print from Excel, only color will print.

    I am having trouble printing to an Epson XP600.  We have replaced the printer and we are still having the same problem.  When I try to print from Excel, only the color prints.  Any suggestions?

    Has anyone else had issues not being able to print black (such as a document)?  My photos print great, but when I try to print a simple black-ink document, it won't work. Any suggestions?

  • I need my url bar back. The customized search bar is 6x larger. I don't need this in addition to a Google page for searches. I need to see what I am trying to access. How do I enlarge the url window and shrink or delete the other window?

    I can't see what I am typing in the URL bar. Maybe 5 characters are visible an a time. The Translator Bar Covers over half of the open window.

    Mozilla hasn't changed anything like that in Firefox 3.6.x versions, which is getting security patches but not any further development of new or existing features. Plus, Mozilla doesn't install anything related to Yahoo, something else probably installed that.
    Please provide a screenshot of what you are talking about. <br />
    https://support.mozilla.com/en-US/kb/Adding+screenshots <br />
    There was a feature similar to what you are describing, that was in and out of the Firefox 4.0 betas last fall, but the 3.6 versions never had anything remotely like what your description has me visualizing.
    Ate you sure that one of your add-ons isn't doing that? <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Maybe you are looking for