My Galaxy S5 is saying "FIRMWARE UPGRADE ENCOUNTERED AN ISSUE"

What do I do to fix it? I am on a MacBook.

    CamCroz99, we're stepping in with our tool belts on. Are you connecting your android device to your MacBook via USB cable? Did a pop up message appear on your screen advising you that additional software is needed?
Please provide more details so that we can further assist you. Additionally, for your convenience, click http://www.verizonwireless.com/support/ for more device support.
LasinaH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • Firmware upgrade encountered an issue

    Right now my Galaxy S3 is sitting at a screen that states "Firmware upgrade encountered an issue.  Please use Software Repair Assistant & try again."  Whenever I power on my phone, I get that message.  I've tried to do an Emergency Recovery in both Kies and Kies 3, but neither are able to recover, and the only way, it seems, to get the SRA is to plug my phone into my PC and get it from Autorun.  Since my phone is not leaving the error screen, I don't get the auto run option to install the SRA.  Is there any way to download it manually to get my phone running, or is it pretty much bricked and I'll have to look at replacement options?

    I found a solution on the XDA forums site, but thanks anyway.  Looks like I just needed to run the Software Repair Assistant, which I'm a little surprised that the Verizon store I went to didn't have it on hand to attempt to fix my phone.  I got my device repaired, and it's working great.  Just really wish my Wiimotes worked in Android 4.3. 

  • RE1000: 1. Firmware upgrade and strange issues. 2. WPS 'on' despite being clearly disabled

    1. WPS shows 'on' in the RE1000's web status page even though it shows disabled in the wireless security page!
    2. The unit seemed to be acting up multiple times ("attempting to connect" or whatever the exact message is) in the middle of both the firmware upgrade to 1.0.01 and the subsequent firmware downgrade to 1.0.00
    Luckily it did NOT get bricked!
    It also at times would just stop responding or redirect to to the erouter page, despite clearly being in the RE1000 web admin pages and clicking wireless survery links etc.!
    Bizarre!
    It may be that it needed rebooting / resetting, but it happened during the first upgrade.
    3. It also said 'authentication / authorization failed' when I attempted to manually connect to my AP in the 'Site Survey' screen. However, when I then go to 'WLAN statistics' it shows Status:  Associated anyway.
    Bizarre!
    Has anyone else seen any of this?

    Mort wrote:
    What is the make and the model number of your router? The RE1000 is meant to extend the range of an 802.11n network. If attempting to extend the signal for a traditional 802.11g router you will not achieve the desired performance because it is not optimized to extend standard 802.11G signals.
    So if you are using n-technology router I suggest you to reconfigure the RE1000..
    Here is the link for the configuration of the RE1000
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=22045&userrole=Links...
    Setting up your RE1000 using the setup CD
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=1165f7b9a6fe4904bd7bf82eea32be0b_Setting_up_your_R...
    I am using Linksys's own E4200 which is their current top of the line consumer router (802.11n 300 Mbps on 2.4 GHz and 450 MBps on 5 GHz).
    Thanks for the suggestion, but my RE1000 has been configured perfectly since the beginning.
    I also do not have WPS enabled (although the one screen says it is while the other setup screen clearly shows it is off) and other than the flashing light (and strange behavior / bugs), it works nicely as far as the actual intended functionality is concerned.
    I had the same flashing light issue with my E4200 router, which Cisco finally acknowledged was an issue on their end (which I was convinced all along given how many others had the same exact issue) and which they fixed in the latest E4200 firmware (1.0.03) - see release notes.
    I suspect the RE1000 has a similar code defect (bug) that happens under a specific set of circumstances (which explains why not all owners are affected).
    Hopefully they will address it soon.

  • E66 GPS problem after firmware upgrade to v.500

    hi there, sorry but im going crazy with this problem....
    id like to know who has a nokia e66, performed the v.500 upgrade and has GPS that doesn't work anymore after doing the upgrade, am i the only one?? what did the new upgrade changed? how to fix this??? i did all i could think of.. format memory card, reset phone, reinstall firmware etc etc. before upgrade it was working like a charm, getting signal fast and all. tried to enable and disable a-positioning, etc etc, resetted, removed battery etc etc.... and i upgraded the firmware with Nokia Ovi Suite for the note.. so the "good" stuff.
    gabrio

    famous007 wrote:
    Hi I am also having the same problem.  I upgraded my firmware to version 500.21.009 and my gps is not working.  Anyone has a solution to this problem.  Will the latest firmware upgrade resolve this issue?
    @famous007
    Presumably you have this version of Ovi Maps installed upon your E66:http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-e66/
    If you go to Menu > Tools > Settings > General > Positioning > Positioning methods - try temporarily disabling all except Integrated GPS, go outside away from tall buildings if feasible launch Ovi Maps and wait 20 - 30 minutes for first positional fix to be established.
    Happy to have helped forum with a Support Ratio = 42.5

  • Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

    Hey all
    I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
    But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
    I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
    Any idea what to do ??
    My printer is a HP Laserjet Pro CP1025nw
    Thanks
    Jan

    Hello Jan
    It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
    The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Firmware Upgrade causes severe slowness and Hangs

    Has anyone else encountered this problem? I did do the firmware upgrade, and that caused slowness in responsiveness (followed immediately by that spinning wheel). In some cases, it completely hangs. At this time, I also tried to VNC into it, and it wasn't listening. It looks like GUI and network connectivity got hosed. This happens at least 10 times today.
    Any suggestions?

    spingineer,
    I haven't seen the firmware update (done 2x) alone cause the problems that you're mentioning. In fact, I didn't notice a thing after running it. I DID notice issues when I ran all the updates (machine fresh out of the box and then everything at once). You machine shouldn't be any slower. Make sure you have enough free space on your drive.
    The obvious, and often underused, diagnostic tool is to create a new user account and see if the issues persist there. If not, then look to what's running in your login items and your applications. You may just need to repair permissions, but sometimes it helps to verify or repair the disk.
    As to the network connectivity. I'd say it's basically a given that a lot of minis aren't good citizens.
    What I see is contention. It's like the machine thinks 'oh, someone else is using the connection so I'll back off a bit then try again', even if nothing else is on at all. It could be partially hardware, there are changes in the machines; but it might be something that can be solved w/ modifications to the stack. It's almost like a feedback loop. The more you use the connection the more it thinks it is competing w/ other machines for access and the slower it becomes. Try the usual, zap the pram, repair permissions, etc. There's a good link if you use search to a tutorial that may help you w/ some network connectivity issues on the mini. (moving out system configuration, promoting your primary connection to the top, using the assistant, rebooting and zapping the pram).
    As easy as it seems to look at the firmware as the source of the problems, I haven't seen that as the foundation issue for either of the difficulties you are experiencing with your machine.
    Hopefully a few simple resets and permission repairs etc will remedy the issue.
    Good Luck,
    -j

  • Creative MuVo TX FM Firmware Upgrade 1.18.02 - The End For Many Players - Par

    This is part 2 of the story since you cannot post such a long message in one posting.
    >>Dear >>>>in my first mail I wrote already:>>>>After installing the recovery driver I run the >>firmware update again. It says that it found a >>device in recovery mode and more (pretty quick >>message) and after this it searches for this >>device - and does not find any device connected >>to an USB port.>>>> From this statement you can see that I installed the recovery drivers
    >>and put the player in recovery mode. Then the player is seen by your >>update software since it finds the player in recovery mode. But after >>this it cannot transfer the new firmware because suddenly it does not >>see the player anymore on an USB port...>>>>To be honest - if your support team would read the mails a bit more >>carefully we all could save a lot of time... And of course I did >exactly>>as described by you and in the update notes. And this all on two >>different computers with two different OS - XP and Win98 as I said in >my>>first mail already...>>>>Best Regards,>>>>Peter>>>>>>>>At 02:6 .0.05 +000, you wrote:>>>Dear xxxxxx>>>>>>Thank you for replying to us.>>>>>>In response to your email, kindly ensure that your player is used on >>the>>>minimum operating system requirement. When connecting your player >>>directly to the computer, was your player being recognized? I have >>>verified the firmware update.>>>>>>Kindly verify the below steps you have used to update the firmware for>>>>>your player: >>>. Download the MuVoTXFM_PCFW__8_02.exe file into your local hard >>>disk.>>>2. Connect your player to your computer.>>>3. Double-click the firmware upgrade file.>>>4. When prompted to set your player in Recovery mode, disconnect your
    >>>player from your computer. Press and hold the Play button while >>>connecting your player to your computer's USB port. Continue to hold >>the>>>Play button for about 0 seconds after connecting your player to your
    >>>computer. Release the Play button when the Find New Hardware dialog >box>>>>>>>appears on the computer screen. Did you encounter any issue?>>>5. Follow the instructions on the screen to install recovery drivers >>for>>>your player.>>>6. Double-click the firmware upgrade file and follow the instructions
    >>on>>>the screen.>>>>>>Are you still encountering the same issue?>>>>>>Do email back on the status concerning the issue so that I can assist
    >>>you further. Thank you. >>>>>>Best Regards>>>>>><name removed>>>>Technical Support>>>Creative Labs Asia>>>>>>To provide feedback on your "Creative Experience" please click on the
    >>>following link:>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>========== >>>DISCLAIMER >>>========== >>>This email and any attachments may contain private, confidential and >>>privileged materials for the sole use of Creative's intended recipient>>>>>and is not to be forwarded or copied to others. Any review, copying >or>>>>>>>distribution of this email or any attachments by others is strictly >>>prohibited. If you are not Creative's intended recipient, please >>inform>>>Creative immediately by responding to this email and thereafter >>>permanently delete the original and any copies of this email together
    >>>with any attachments. Thank you>>>>>>Original Message Follows:>>>------------------------>>>Thanks for your response. I am a bit confused since I answered many of>>>>>your questions in my last mail already. And I have been working with
    >>>computers for more than 30 years and did many upgrades with THIS >player>>>>>>>already. Since other users have exactly the same problem - if you >check>>>>>>>the forum - it must be a problem with the player or your upgrade >>>software. Should I send the player to your company for repair? But in
    >>>any case - you should warn the customers using this upgrade or take it>>>>>from your webpage. If you read my old mail - I tried the whole upgrade>>>>>on 2 different OS and 2 different Computers with your latest drivers.>>>>>>Best Regards,>>>>>>Peter>>>>>>>>>At 07:38 0.0.05 +000, you wrote:>>>>Dear xxxxxx>>>>>>>>Thank you for reaching us at Creative Technical Support; we >appreciate>>>>>>>>the opportunity to assist you.>>>>>>>>Based on the information you provided, may I know if are you using >the>>>>>>>>player on Windows XP>>>> or Windows 98? I would like to inform you that the player only >>support>>>>>>>>>>the below operating system:>>>>>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>>>>>You might like to consider the below factors when connecting your >>>player>>>>to the computer's USB port:>>>>>>>>. Make sure you have the latest drivers, especially USB, installed >>for>>>>your motherboard. If you're not sure, check with your motherboard >>>>manufacturer.>>>>>>>>2. Make sure your motherboard has USB v. ports, supplying at least
    >>>>500mA to the USB ports. If you're not sure, check with your >>motherboard>>>>>>>>>>manufacturer.>>>>>>>>3. Try unplugging all other USB devices from the system.>>>>>>>>4. If you're using a hub, try connecting the product directly to the
    >>>>onboard USB and vice versa.>>>>>>>>5. You might wish to verify the functionality of your product on >>>another>>>>computer.>>>>>>>>Do let me know the result.>>>>>>>>In case if you need any clarification, please do not hesitate to >>>contact>>>>us. Thank you.>>>>>>>>Best Regards>>>>>>>><name removed>>>>>Technical Support>>>>Creative Labs Asia>>>>>>>>To provide feedback on your "Creative Experience" please click on the>>>>>>following link:>>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>>>========== >>>>DISCLAIMER >>>>========== >>>>This email and any attachments may contain private, confidential and
    >>>>privileged materials for the sole use of Creative's intended >recipient>>>>>>>>and is not to be forwarded or copied to others. Any review, copying
    >>or>>>>>>>>>>distribution of this email or any attachments by others is strictly >>>>prohibited. If you are not Creative's intended recipient, please >>>inform>>>>Creative immediately by responding to this email and thereafter >>>>permanently delete the original and any copies of this email together>>>>>>with any attachments. Thank you>>>>>>>>Original Message Follows:>>>>------------------------>>>>=======================>>>>>>>>Subject: CLA (CTL) - Technical Support Request - (MuVo TX FM)>>>>Name: xxxxxx>>>>E-mail Address: [email][email protected]][email protected][/url]>>>>Country: Thailand>>>>Self Description: Advanced PC User>>>>------------------>>>>Support Inquiry: ID(3) My Creative hardware stopped functioning >>>>correctly >>>>Product: MuVo TX FM>>>>Serial Number: C6PF32477002804Z>>>>Date Of Purchase: /2/2005>>>>>>>>------------------>>>>Operating System: Windows XP>>>>Creative Model Number: MUVO TXFM 52 MB>>>>Computer Brand/Model: >>>>Processor/CPU: >>>>Memory: >>>>BIOS Type/Revision: >>>>System Board/Chipset: >>>>------------------>>>>>>>>Detailed Problem Description:>>>>I tried to update to the latest firmware >>>>MuVoTXFM_PCFW__8_02 since I stay in Thailand >>>>and need the Thai letters. I installed the >>>>recovery driver since the upgrade software >>>>required this and did exactly what is described. >>>>After installing the recovery driver I run the >>>>firmware update again. It says that it found a >>>>device in recovery mode and more (pretty quick >>>>message) and after this it searches for this >>>>device - and does not find any device connected >>>>to an USB port.>>>>>>>>I have tried this many times and even with the OS->>>>Win98. The upgrade software detects the device in >>>>recovery mode but after this nothing more >>>>happens - it does not find it on an USB-Port >>>>anymore. >>>>>>>>=======================
    Moderator note: Please remove the name of the advisor when posting up e-mails.
    Message Edited by Catherina-CL on 0-3-2005 2:4 PM

    This is part of the message since you cannot post such a long message in posting.
    This should show how lost you might be with your warranty. If you install the Firmware Upgrade .8.02 your player might be useless. There is no way to make it work again. Not really. If you understand what Creative seems not to do. So dear user - buy a new player. If you want to know what the solution is to make your player work again post here. If there are enough postings I will explain it here. Too sad that Creative does not do it. It is their job not mine... But again - I am not talking about a problem what is nice to have it solved. I am talking about a player that does not work anymore. If you do not want to wait for my solution just send your player for repair - it was not your fault that it does not work anymore...
    This story with the great support was a test of Creative and will be used in a review. So be not surprised to find it somewhere else.
    Here the Creative support story. The first mail is at the bottom. I had to make part and part 2 since you cannot post such a long message here.
    To: Creative Labs Asia Customer Support <[email][email protected]][email protected][/url]>Subject: Re: CLA (CTL) - Technical Support Request - (MuVo TX FM) (KMM7755874I6636L0KM)Dear,I know the solution long time already. I just wanted to test the support at Creative. The problem is real and forces owners of your players to buy a new one since their playes get useless after the upgrade. Not only that Creative puts a faulty upgrade on their homepage - their support is good for nothing. But this was a test of the Creative support. I hardly can believe that Creative is not in the position to solve a very simple problem caused by Creative - what has severe consequences for their customers. But this mail story confirms exactly this. So my advice to any customers - stay away from this company and their products - what is the final result of my test. If you want to know the solution for the problem please contact me again - I am glad to help such a poor company :-)))) For free? I am not so sure...since my player was not for free too...Best Regards,PeterPS: The product is still within the "police period" of my dealer. And I did not just buy the product. If you ever read what your system tells you (what I had to enter) - it was long time ago.
    At 03:48 3.0.05 +000, you wroteear PeterBased on the information you provided, since you have just bought the product locally, you may like to contact and check with the dealer firstfor their purchase policy period and see if the product is still within their policy period. If they are unable to assist you, do contact us so that we can assist you promptly in your issue. Thank you. Best Regards<name removed>Technical SupportCreative Labs AsiaTo provide feedback on your "Creative Experience" please click on the following link:http://www.**bleep**.com/support/con...asp?r=CLA&d=TS========== DISCLAIMER ========== This email and any attachments may contain private, confidential and privileged materials for the sole use of Creative's intended recipient and is not to be forwarded or copied to others. Any review, copying or distribution of this email or any attachments by others is strictly prohibited. If you are not Creative's intended recipient, please informCreative immediately by responding to this email and thereafter permanently delete the original and any copies of this email together with any attachments. Thank youOriginal Message Follows:------------------------Dear .,I am a bit confused. What does my problem have to do with buying it on an oversea/business trip? This you really have to clarify. And why do you need my contact number/residential address if you have my contact email address already? You want to come to me and bring me a new player?Would be fine :-) But since there are many others with the same problem there must be a better solution.But in any case - I bought it were I li've and not on a business trip - the dealer is just around the corner - but I guess with more than 30 years almost daily IT experience I have a bit more knowledge than him. Igave you the serial number and the date of purchase. I bought it in Thailand where I li've now. Best Regards,PeterAt 09:28 2.0.05 +000, you wrote:>Dear Peter>>Regards to your issue, may I know is the unit purchase locally or during>Oversea/Business trip? If the unit is purchased during oversea/business
    >trip, kindly provide me with the information of the place of purchase, >your current location (residential address) and contact number so that I>will be able to provide you with the advice required promptly.>>Do email back on the status concerning the issue so that I can assist >you further. Thank you. >>Best Regards>><name removed>>Technical Support>Creative Labs Asia>>To provide feedback on your "Creative Experience" please click on the >following link:>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>========== >DISCLAIMER >========== >This email and any attachments may contain private, confidential and >privileged materials for the sole use of Creative's intended recipient >and is not to be forwarded or copied to others. Any review, copying or
    >distribution of this email or any attachments by others is strictly >prohibited. If you are not Creative's intended recipient, please inform>Creative immediately by responding to this email and thereafter >permanently delete the original and any copies of this email together >with any attachments. Thank you>>Original Message Follows:>------------------------>Dear ,>>I was talking about Win98SE. I guess there is are not many people using
    >Win98 anymore.>>The problem is that the player is in recovery mode already. When I plug
    >it into the USB port it does not show up as a dri've anymore. But the OS>confirms that I have put in a device into the USB port when I plug it in>pressing the play button. Also when I run the upgrade software it says >that it has found a device in recovery mode but then it does not find it>anymore. But again - neither WinXP nor Win98SE allow me to format the >dri've since it does not show up as dri've at all.>>Sorry for all this. But realize that I and many others have a piece of >scrap as long as we cannot find a solution for this problem. In the >forum people write that they even bought a new player already since this>firmware upgrade made an end to their TX FM.>>Best Regards,>>Peter>>At 03:0 2.0.05 +000, you wrote:>>Dear Peter>>>>Based on the information you provided that you have verified the player>>>>on another computer with Windows 98. I would like to inform you that >the>>player and the updated firmware only support the below operating >system:>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>I understand that you are also using the player on a Windows XP >>computer. However, you might like to verify your player on another >>computer that meets the above mentioned minimum operating system. Do >let>>me know the result. >>>>If issue persists but when connecting your player directly to the >>computer the player is being recognized, format the player using the >FAT>>file system, and download and install the latest >>driver/firmware/application update available through the below link: >>>>(Note: All contents in the player will be removed when you format your
    >>player, please backup the files) >>>>http://www.asia.creative.com/support/downloads/ >>>>. Insert your MuVo TX FM player into the USB port on your PC/Laptop, >>try a different USB port or hub if it is not detected. >>2. Open Windows Explorer. The player will be recognized as a Removable
    >>Disk. >>3. Right-click on the player and choose Format. >>4. In the File system drop down menu, select FAT, and then click the >>Start button. Do not select FAT 32, though it is selected as default by>>>>Windows XP. >>>>After the formatting is complete, make sure that you stop your player >>before disconnecting it from your computer. (Please take note that stop>>>>your player before disconnecting it from your computer is a must. >>Otherwise it will cause damage to your player's memory >storage/Harddisk)>>>>>>To stop your player in Windows XP, Windows 2000 or Windows ME Click on
    >>the Safely Remove Hardware icon on the Taskbar, click Safely remove USB>>>>mass Storage device, and disconnect your play when you are prompted to
    >>do so. >>>>Make sure that the icon below appears on the LCD screen again for at >>least fi've seconds before disconnecting your player.>>>>Do let me know the result. >>>>In case if you need any clarification, please do not hesitate to >contact>>us. Thank you.>>>>Best Regards>>>><name removed>>>Technical Support>>Creative Labs Asia>>>>To provide feedback on your "Creative Experience" please click on the >>following link:>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>========== >>DISCLAIMER >>========== >>This email and any attachments may contain private, confidential and >>privileged materials for the sole use of Creative's intended recipient
    >>and is not to be forwarded or copied to others. Any review, copying or>>>>distribution of this email or any attachments by others is strictly >>prohibited. If you are not Creative's intended recipient, please >inform>>Creative immediately by responding to this email and thereafter >>permanently delete the original and any copies of this email together >>with any attachments. Thank you>>>>Original Message Follows:>>------------------------
    Moderator note: Please remove the name of the advisor when posting up e-mails.
    Message Edited by Catherina-CL on 0-3-2005 2:43 PM

  • Disappointed w E51 Firmware Upgrade

    Good day! I have just upgraded my Nokia E51, with Product Code 0552354, from 100.34.36 to 200.34.36 firmware. The said upgrade finished successfully and confirmed through my phone by keying *#0000# in stand-by.
    However, when I tried to update my Mail for Exchange inbox using a public WiFi as I have previously done, I keep encountering an error. The same public WiFi was detected and my phone says it is connected.
    I tried browsing for google.com and after a few seconds of waiting, a "Web: No Gateway Reply" message.
    When I got back to my desktop and queried for the error message I encountered, luckily or unluckily, tons of fellow Nokia users posted the same dilemma.
    Does firmware upgrade sort of 'malfunctioned' my phone's WiFi functionality? If so, then what's the purpose of the upgrade?
    I contacted Nokia Care via email and the response was to check my Wireless LAN settings by going to Tools > Settings > Connection> Wireless LAN > Options > Advance Settings > Changing advanced settings is not recommended. Continue anyway? > Yes > Automatic Config > Disabled > Power Saving > Disabled. Yet to no avail.
    I find it VERY disappointing provided the fact that I chose this phone primarily because of it's WiFi feature. I don't have time to go to Nokia Care centers that is why I am consulting this board. Hope someone could give a response that could fix this issue... :-(
    Determination overcomes impossibility...

    04-Jul-2008 09:45 AM
    tagabukidph wrote:
    Good day! I have just upgraded my Nokia E51, with Product Code 0552354, from 100.34.36 to 200.34.36 firmware. The said upgrade finished successfully and confirmed through my phone by keying *#0000# in stand-by.
    However, when I tried to update my Mail for Exchange inbox using a public WiFi as I have previously done, I keep encountering an error. The same public WiFi was detected and my phone says it is connected.
    I tried browsing for google.com and after a few seconds of waiting, a "Web: No Gateway Reply" message.
    When I got back to my desktop and queried for the error message I encountered, luckily or unluckily, tons of fellow Nokia users posted the same dilemma.
    Does firmware upgrade sort of 'malfunctioned' my phone's WiFi functionality? If so, then what's the purpose of the upgrade?
    I contacted Nokia Care via email and the response was to check my Wireless LAN settings by going to Tools > Settings > Connection> Wireless LAN > Options > Advance Settings > Changing advanced settings is not recommended. Continue anyway? > Yes > Automatic Config > Disabled > Power Saving > Disabled. Yet to no avail.
    I find it VERY disappointing provided the fact that I chose this phone primarily because of it's WiFi feature. I don't have time to go to Nokia Care centers that is why I am consulting this board. Hope someone could give a response that could fix this issue... :-(
    Hi tagabukidph
    I just bought my E51 made the upgrades and I also get the "No Gateway reply" and it really ticks me off as I had to go through a lot of hassel to find my WEP key.

  • Firmware upgrade crippled cp1025nw

    LaserJet CP1025nw color: was working flawlessly
    received email from HP 4/3/2012, recommending firmware upgrade to v 20120130.
    ran upgrade 4/3/2012 from iMac, OS10.6.8.
    got error: 'update failed'
    print queue says 'printing', cp1025nw doesn't respond.
    printer lights:  orange triangle enclosed exclamation mark plus green semicircle 
      This means: fatal error, per the user manual.  
       manual instructs to turn off, unplug, plug-in, turn on.  I did this several times.
    printer lights still indicate: fatal error.
    HP utility says: device status: unknown, service ID: unknown, FW version: unknown, driver version 2.0.20110727
                      tried to print configuration page: got error 'cannot establish two-way communication with the device'
                      printer and computer are connected with USB cable,  (this cable / port communicates without issue to Epson inkjet printer)
    Tried printing from Dell laptop: Latitude E6410 with USB cable: Windows XP professional, 2002, service pack 3.
                      has routinely printed from this computer previously.
    error message in printer queue: 'error - printing', 
    Dell said 'found new hardware'  tried to install with HP cd-rom
                      error message said 'the hardware was not installed because the wizard cannot find the necessary software'
    ran the HP print diagnostic utility HPPDU.exe file from the Dell with USB cable: 'Everything checks out okay with your printer'
     print test page: no response from the cp1025nw
    What should I try next?

    Since my last post I’ve retried the same troubleshooting described before, this time just from the PC.  The result is still the same.  Lights on the cp1025nw indicate “fatal error”.
    Does anyone know how to put this printer into ‘bootcode’ mode?  I’ve read about this in some other posts about HP firmware updates trashing printers.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    and
    http://www.fixyourownprinter.com/forums/laser/63535
    Is there some combination of button presses that sends the printer into bootcode so it is ready to accept the firmware?
    HP:  How do you start up these printers when they are just manufactured to load the firmware?

  • I When ever I try to open iTunes, it immediately freezes and says "iTunes has encountered a problem and needs to close."

    I am using a Windows 7 laptop, 64 bit. When ever I try to open iTunes, it immediately freezes and says "iTunes has encountered a problem and needs to close." I have tried uninstalling then reinstalling, and also going back to previous versions. Any ideas as to how to fix this? Thanks!!

    You need to remove all installer file, uninstall iTunes and all related programs, then do a clean install.
    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Firmware Upgrade: p1102w, p1606dn, m1210 series, cp 1025nw

    The following products require a firmware upgrade (FW older than 20130210 ) and re-registration with ePrint center for use of the ePrint feature. Please print a configuration page to see what version of firmware your printer has.
    HP LaserJet P1100 Series
    HP LaserJet Pro P1102w
    HP LaserJet P1600 Series
    HP LaserJet Pro P1606dn
    HP LaserJet M1210 MFP Series
    HP LaserJet Pro M1212nf MFP
    HP LaserJet Pro M1213nf MFP
    HP LaserJet Pro M1214nfh MFP
    HP LaserJet Pro M1216nfh MFP
    HP LaserJet Pro M1217nfw MFP
    HP LaserJet Pro M1218nfs MFP
    HP LaserJet Pro M1219nf MFP
    HP LaserJet Pro CP 1020 Color Printer Series
    HP LaserJet Pro CP1025nw
    If a customer has one of the above devices, has FW older than 20130210 and has registered the device with HP ePrint Center, they will need to update the firmware on their device in order to continue to use the ePrint feature.
    To obtain the firmware, please visit www.hp.com/go/eprint and do the following:
    Select your device series from the list.
    NOTE:  Reference above list for help on finding your device series.
    Select the appropriate operating system for your PC.
    Click the RUN button.
    Follow the on-screen instructions to download and install the firmware upgrade for your device.
    After firmware upgrade is complete, you may need to reset Web Services on your device and re-register the device with the HP ePrint Center by doing the following:
    Access the Embedded Web Services (EWS) by entering the IP address of your device in your web browser’s address bar.
    Click on the HP Web Services tab.
    Click the button to remove Web Services.
    Click the button to enable Web Services.
    Print the information sheet to get the new ePrint printer code for your device.
    Go to www.hpeprint.com
    Sign in to your ePrint account.
    Select “Add a Printer” to your Account.
    Enter the new printer code for your device (from the information sheet).
    10.  Enter a new customized email address.
                 NOTE:  Your previous customized email address may be unavailable. If that occurs,                       please choose a new customized email address or enter your old customized email address and choose from one of the suggestions presented.
    11. Change your ePrint settings as needed.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

    @jrboozer,
    Have you tried going into your Start menu, looking for the HP folder, then using the wireless configuration utility? When I set the wireless up on my machine, this was how I did it and it worked beautifully.
    Please let me know if you need any other help.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Firmware upgrade - Router van no longer be accessed

    Thanks to an automatic firmware upgrade my E4200 can no longer be accessed. Cisco is aware of this but have no solution yet.
    Great testing again Cisco before releasing.

    LPD1964 wrote:
    Thanks to an automatic firmware upgrade my E4200 can no longer be accessed. Cisco is aware of this but have no solution yet.
    Great testing again Cisco before releasing.
    Check if you are still getting the valid ip address from the router. Connect a pc to it and open command prompt and type-in ipconfig. If you are getting the 192.168.1.100 ip address on the local connection, try to ping the router (ping 192.168.1.1). If you are getting good replies then the router is good. If it will say request timed-out then reset the router back to defaults by pressing the reset button on it for 10 seconds.

  • Firmware upgrade for WRT54G v7

    is there no firmware upgrade for WRT54G v7? i didn't even find version7 as listed in linksys page for routers....

    Click on Download and save the file on your Desktop..
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use dmin in lower case...Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab-Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful"  After the firmware
    upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Firmware Upgrade and Battery Life?

    Since the firmware upgrade on my Macbook in early February the fan appears to be running at full speed all the time and battery life is crap! Has anyone else noticed this? Is there a fix/workaround available please?

    Sounds more like an app stuck processing that shouldn't be....does happen from time to time. Behing hot means it is constantly processing.
    To fix:
    Try a reboot (described below).
    Think of it this way, the iPhone is more of a computer than a phone. It suffers from being a new OS and nobody can deny there are not bugs and memory leaks. The longer left running, the more things start to fail or slow down (I have had the iPhone since day one of original phone and I am just speaking from my experience). Thus I equate it to like when Windows95 came out...not sure of your age or if you remember those days...but back then it was a running joke of how many days you can keep Windows 95 running before you had to reboot. I am sorry to say but the iPhone is the same way right now (but getting better with a few hiccups back during the 2.0 release). So for me, I reboot daily when I leave in the morning and take it off the charger. By doing so I rarely see any lag or problems.
    A reset/reboot is:
    Go to Home Screen
    Press and Hold Home Button
    Keep holding and press and hold Lock Button
    Keep holding Both
    You will see Slide to Turn Off (Don't let go to slide, just keep holding)
    The phone will turn off (in time, but screen will look like it has some white lines)
    Keep Holding
    When you see the Apple Logo, you can let go.
    Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.
    You may also wish to read this tread about reboots and odd application behavior.
    http://discussions.apple.com/message.jspa?messageID=5851978#5851978
    For me, 2.1 works great.

  • Firmware upgrade times out (BEFW11S4 v4)

    Hi, my firmware upgrade times out everytime and i've read that the only way to get past this is by flash-upgrading the router through this web address ftp.linksys.com/pub/network but the link doesn't work for me and says '550 failed to change directory'. Is there another link i can try or another solution?
    Previous thread: http://forums.linksysbycisco.com/linksys/board/message?board.id=Wireless_Routers&thread.id=122275

    Download Firmware 314 KB...
    Download TFTP Utility...
    After downloading the Firmware rename the file(like - befw11s4)...
    Follow these steps to upgrade the firmware on the device : -
    Double click the TFTP.exe file and click run.
    For Server- Enter the IP Address of the router that you assigned.  By default, the router is 192.168.1.1...
    For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
    For File- Click the triple “…” button and browse for the .bin firmware file...
    Click Upgrade button to start upgrading.  A progress bar should show up to show the progress.
    Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Maybe you are looking for