My hp 2000 "blue screened" on my yesterday and i'm trying to restore my files and it won't work?

I have an HP 2000-427CL, the OS is Windows 7 Home Premium, and recently after I had got it fixed it "Blue Screened" on my and it still shows the dredded blue "death" screen. Can someone please tell me what I can do?

Does windows ever load?

Similar Messages

  • My ipod wont charge. The screen flashed white yesterday and now it doesnt work

    My ipod wont charge. It died yesterday and when i did the lock home button thing the screen flashed white. After that the dead signal wont even pop up now an suggestion. Its a ipod touch 4 generation, 36gb I tried charging it to my computer, wii,tv, wall plug NOTHING WORKS.!
    1. The lock button and home thing WONT WORK.

    Try:
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have an iMac G5 stuck on the gray screen with spinning gear.  I woke up to it being stuck on a blue screen, then force quit and now it's stuck on gray with spinning gear.

    I have an iMac G5 stuck on the gray screen with spinning gear.  I woke up to it being stuck on a blue screen, then force quit and now it's stuck on gray with spinning gear.  Please advise.

    If you have a G5 then it's a PPC (Power PC) based iMac, this is an Intel iMac forum. Try the Gray screen appears during startup link for troubleshooting steps. I suspect the HD has crashed.

  • Blue screen with flashing folder and question mark on startup

    Hello.
    I need help with my Macbook Pro.  I get a blue screen with a flashing folder and a question mark at start up.  To date I have tried the following:
    Apple Hardware (Extensive) Test (Results:  "No Trouble Found")
    Safe Boot
    Reset NVRAM
    Reinstall OS X via the internet (I received no discs when I purchased it).  I select the StartUp Disk to reinstall. When reinstalling via the internet I get to a point of reinstalling Mountain Lion but it asks me to choose a drive - yet there are no drive options to choose from. Then a window comes up asking me to "Select the system you want to use to start up your computer" but no options appear.  When I choose "Restart" a note pops up saying "You can't change the startup disk to the selected disk.  Startup Disk could not gather enough information on the selected disk."
    The only option is "Restart" from the Apple menu.  When I choose that it goes back to the original "Blue screen with flashing folder and question mark on startup."
    I have no Time Machine
    I can't access the disc utility.
    Are there any ideas as to what might be the problem?

    Your hard drive has likely failed and needs replaced. That would explain why the system does not display it when you attempt to reinstall the OS via Internet Recovery.

  • U150 Blue Screen on Restart, Shutdown and Hibernate

    I've tried to do a system restore.
    I've updated drivers thru live update, smart update and manually update.
    I've deleted the webcam driver per another discussion on this board
    I would do a clean install however I never got a system disk when I got the computer and if I did it wouldn't matter because there is no cd drive.
    Out of options?
    Blue Screen info is below:
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7600.2.0.0.768.3
      Locale ID:    1033
    Additional information about the problem:
      BCCode:    9f
      BCP1:    00000004
      BCP2:    00000258
      BCP3:    84BE7798
      BCP4:    82D3DB24
      OS Version:    6_1_7600
      Service Pack:    0_0
      Product:    768_1
    Files that help describe the problem:
      C:\Windows\Minidump\111410-34304-01.dmp
      C:\Users\Erica\AppData\Local\Temp\WER-112273-0.sysdata.xml
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\windows\system32\en-US\erofflps.txt

    like you did, better to upload somewhere else.
    anyway, here's your issue : driver_power_state_failure @ ntkrnlpa.exe ( 0x0000009f )
    first of all, perform clean windows installation. you don't need recovery disc for that.
    shut down your computer and press one key recover button ( button with the arrow icon ) and follow the instructions.
    after that, if you still get the blue screen, restart your computer and when you see lenovo logo, press f8 to load safe mode.
    un-install readycomm application if installed, antivirus and firewall software, too.
    restart your computer for normal mode and check if issue persists.
    if issue persists, load on safe mode. then try this :
    that error means a driver is not handling the power state
    properly. check in control panel - device manager to be sure major drivers are not shut off during
    sleep - double click display adapter - nic  and wifi - sound and others - power management tab - uncheck
    allow computer to turn off power. maybe only one has an issue.
    if issue still persists, try these:
    start > type in search box > msconfig  find at top > right click > run as admin >general tab - check diagnostic start  > apply / ok 
    >  reboot
    post back the results.
    http://support.microsoft.com/kb/954429

  • HT201269 one fine day, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working .  May i know how to proceed to recover lost conta

    one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working .  May i know how to proceed to recover lost contacts.

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

    I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

    iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

  • HT1338 I just purchased my macbook pro yesterday and the update combined it downloads but when i restart the computer it says something went wrong and it won't work i don't know where to start to download this update

    I just purchased my macbook pro yesterday and the update combined it downloads but when i restart the computer it says something went wrong and it won't work i don't know where to start to download this update

    Try here:
    http://support.apple.com/kb/DL1524

  • I updated Lightroom 4 yesterday and it won't download my photos. Is there some way to check if the camera supported?

    I updated Lightroom 4 yesterday and it won't download my photos. Is there someway to check if it supports a Nikon Cool pix P6800?

    Here is the list of what version of Adobe software you need, at a minimum, to work with each camera they support:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    I am not familiar with a Coolpix P6800.  A P7800 requires LR 5.3 or higher, so wouldn’t work with LR 4.  There is an S6800 that was announced 4 months ago that I don’t see produces raw files to be supported or not by LR.

  • I can't lock screen on Ipad mini. My lock screen button is working for shutdowning Ipad, but don't working for lock screen. Also I tried to lock screen from Assistive Touch and it's not working. When I click lock screen on assistive it nothing happens.

    I can't lock screen on Ipad mini. My lock screen button is working for shutdowning Ipad, but don't working for lock screen. Also I tried to lock screen from Assistive Touch and it's not working. When I click lock screen on assistive touch it nothing happens.

    Thank you for that update.
    I would next backup your device to iTunes with this article:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    And restore it first as a new device, and verify that it works properly, then restore from your backup with the same article below to ensure that it is still working.
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    If it does not work correctly when you set up the phone as a new device, I would next seek service for your iPad:
    http://www.apple.com/support/ipad/repair/other/
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Important: Win 2000 Blue screens specials

    I struggled for three days to install RAID on my machine with constant blue screens.
    Turns out that only later builds of windows 2000 support my hard drive's RAID.
    Make sure you have the absolute latest Windows 2000 or XP.
    Solved my blue screens nightmare:)
    Hope this helps someone.

    Sorry, my setup is:
    P4 2.60 FSB 800, HT enabled
    Kingston HyperX DDR400, 2 sticks of 512MB each
    865PE Neo2-FIS2R
    Antec TruePower 430W
    Dual SATA Hitachi 80GB
    Win2k

  • Random Blue Screen Crash with 5S and iOS 8.1

    Since upgrading to iOS 8.0 my iPhone 5S randomly gets blue screens and then crashes and goes into a loop of boot up, blue screen, reboot, blue screen, reboot...etc. My 5S did this again today when during my upgrade to iOS 8.1 via USB and I was forced to do a factory restore on it. The blue screen is still occurring after the restore and 8.1 upgrade. Is this a known issue? I was hoping this was going to get fixed with 8.1 but unfortunately, it doesn't look like it has.

    Same here,
    yesterday i updated my 6 plus 64gb with iTunes.
    After the update, my phone crashes (blue screen) in games (Maze Runner) and Safari.
    I tried to downgrade to ios 8.0 because i didn't had any problem with 8.0 but iTunes says that the file is not valid "iPhone7,2_8.0_12A365_Restore"
    HELP Apple,
                            iPhone 6 Plus, iOS 8.1, MGAH2ZD/A model

  • When trying to save page in Yahoo! Bookmarks, I receive blue screen with message:A problem occured while trying to save bookmark. Please try again later. I get the same message every time.

    When I click on Yahoo Bookmark Icon & click on Save this page,
    I get the normal screen Save To My Bookmarks, etc. I fill out as
    normally & click save. That is when I receive blue screen with above message. Frustrating because it lets me go through the process but then will not save. Is this a cookie or privacy issue??

    At the top of yahoo bookmarks there is a message:
    To Yahoo! Bookmarks users:
    Yahoo! Bookmarks is transitioning and will be exclusively available via Yahoo! Toolbar. During this transition, you will be able to access your bookmarks in read-only mode.We expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.
    Please download Yahoo! Toolbar for a full bookmarks service. We sincerely apologize for any inconvenience during this period.
    But the toolbar dosn't work either, even after it is updated, so we may just have to wait.
    Hope this helps :)

  • TS1502 My iPod Classic is shutting down iTunes, blue screening my computer (windows7) and restarting it... any suggestions?

    I hadnt used my iPod in awhile, so when I tried to sync it, the libraries didnt match up and to avoid hassle I decided to restore it (using the option on itunes when you plug in your device).
    After restoring, I tried to connect to iTunes again. While it said 'syncing iPod' on my device, it froze iTunes. Within seconds, my computer crashed and a blue screen came up. I restarted my computer and tried to sync again, with the same result. I should also mention that upon plugging it in, my computer comes up with a box saying check device, hardware problems. I click 'find solution/check for problems' but they always come back negative. I've searched for and tried many options:
    Starting it in safe mode, disk use, not allowing auto sync. Rebooting my iPod (hold down menu+center). Rebooting then connecting while the apple logo is displayed. Tried different USB cables. iTunes help said to check for driver updates on my computer, and all are fine.
    If my iPod can just stop working for no apparant reason (its not like it took a late night toilet bowl swim) how I can determine if its toast or I'm just trying the wrong things? Suggestions, please??!!!

    See Corrupt iPod classic,
    tt2

  • Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

    I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP:  c000021a {Fatal System Error}.
                                                                The verification of a KnownDLL failed.  system process terminated unexpectedly with
                                                                 a status of 0x0000221  (0x007fb9c0  0x00000000).
                                                                 The system has been shut down.
    I do not have recovery disks for this computer.  I tried to order them but them seem to not be available.  This is my daughter's computer.  She says she started to have trouble after downloading Frost Wire (music share) and then she removed it.  We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
    This question was solved.
    View Solution.

    Hi,
    Assuming your in the US, recovery discs are available to order for that model here.  That may be the best option.
    You should also be able to do a recovery without the discs as well.  Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible.  This should allow you to recover the PC.
    R
    Although I am an HP Employee, I am speaking for myself and not for HP.

Maybe you are looking for

  • MBP no longer boots into Mac OS 10.9 Mavericks

    After installing Mavericks on launch day and using it successfully for the past few days, my MBP stopped shutting down - system would freeze. I would have to turn it off by holding down the power switch. I booted into Recovery mode to Repair Disk - p

  • An idiot speaks..........

    .........the idiot being me. I have bought the genuine iPod AV cable. This has three connectors - red, yellow and white. My TV has only two inputs - yellow and white. When I connect up (yellow and white) it works perfectly except that the picture is

  • Need query to compare the columns of 2 diff tables of 2 different schemas.

    There are two different tables(sample1, sample2) in different schemas(s_schema1, s_schema2). I want the query to compare the columns of two different tables of two different schemas and provide whether the data as well as the count of data in the col

  • Incorrect Reading from Read Velocity.flx in LV 2011

    Duplicate - delete Ryan Vallieu Automation System Architect

  • How to add BOR link to SAP Mail document

    I would like to use "WF Program Exit" class to add a BOR object to an existing "Send Mail" without a big re-write. I have the Sales Order # on an Send Mail step and want to add link on this message to open the Sales Order. Simple snip of code, like S