My iPad 2'screen stopped working!!!!!

HI,
My iPad 2' screen stopped working.it's under manufacturing warranty.Am i eligible for a replacement?
By the way I dont have the bill with me ,will the serial number be enough?
Oxana

I just ran into the same thing. Screen just stopped accepting any kind of tap or slide input upon taking it out of the case.  I even tried staring at it really hard. 
This happens to be on an iPad 2 that was already replaced once -- because it just stopped working at all.
Note: I BABY my iPad.  It has NOT come into contact with water.  It has NOT been dropped.  It has NOT been through extreme temperature changes.
So.   While I did the reset thing even before coming to this post, and that worked fine, it doesn't instill me with confidence.   And it doesn't answer the question:  "WHY?"   Windows PC users are used to doing the three-finger-salute. I was used to removing the battery from my BlackBerry once a day.  I'm not in the habit of any such thing with an Apple product -- particularly a brand new one.
What gives, Apple?
Mike

Similar Messages

  • TS3274 My Ipad 2 screen stopped working his morning. I've rebooted it. No joy. I've restored it. No better. What next? Who do I take it to?

    My Ipad 2 screen stopped working his morning. I've rebooted it. No joy. I've restored it. No better. What next? Who do I take it to or what else can anyone suggest please......

    If you have reset to Factory Default and it still doesn't work; bring it to an authorized Apple Sevice Center.

  • HT1766 iPad touch screen stopped working.  Can't scroll or select any apps. Can't reboot.  Connect to PC via iTunes doesn't recognize the iPad.

    The iPad touch screen suddenly stopped working.  It's been fine, but stopped all of a sudden.  Couldn't reboot since pressing the hibernate button also asked for a "swipe" but couldn't swipe since the screen isn;t sensing any touching.  can't scroll main screen appas.  Can't connect to iTunes, says not connected.  Next stop Apple store unless someone has an idea.

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My iPod touch screen stopped working, how do i fix it?

    My iPod(4th generation) touch screen stopped working. Okay so it was fine earlier, my home button does not work so i have been using the assistive button for months, and until earlier today it got stuck, i tried to power it off but it doesn't let me slide to power it off, and it doesn't let me press anything on the assistive menu either, and i'm currently waiting for my ipod to die but it's taking forever since it's battery lasts forever! is there any other solutions you can give me?
    and i was wondering if my ipod has life insurance with apple so if something is wrong with the screen, can i take it for a new one? (my ipod is in very good conditions, not cracked or scratched, just the home button is an issue)
    thanks!

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • My iPad sound just stopped working

    My iPad sound just stopped working. How can I fix that?

    Have you tried restarting your iPad?  Press and Hold the Power Button and Home Button for 10-15 seconds until you see the Apple Logo on the screen, and then when you see that, you can release both buttons and wait for the iPad to finish booting up.  Once it comes back up try your sound again

  • App Store on my iPad 2 has stopped working,

    Hi
    Yesterday "Featured" and "Top Charts" in the App Store on my iPad 2 has stopped working just a blank screen, the rest are fine ???,
    ATB HiPad2

    Hi
    The iPad2 fixed itself this morning, All running fine now
    ATB HiPad2

  • The sound on my iPad 2 has stopped working....

    The sound on my iPad 2 has stop working.....no sound in app, home screen, no locking sounds, keyboard clicks, no music, no movies.....no nothing! I have reset settings, I have tried to reboot the iPad numerous of times, I have played with the slide rocker, switched settings back and forth and yet nothing. Is there anything I can do my son iPad is now 2 years old & out of warranty & apple care please help!

    With headphones?
    Speakers?
    Try:
    - Reset the iOS device. Nothing will be lost (done)
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings (Done)
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Why every half hour or so does my iPad camera app stop working?

    Every like half hour or so my iPad camera app stops working. I tap and It and  a blank screen appears. If I turn my iPad off and on again it works fine.

    There are any number of reasons why that might be happening. An app confict, low memory (that's not supposed to happen but ...), so it's hard to say for sure what the issue could be.
    You could try closing the camera app until you need again, and see if that makes any difference. Unless you really need to get to the camera app every half hour for whatever reason, there should be no problem in quitting the app.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
    Then just launch the app again when you need it.

  • Why did my brand new Ipod 5g 32gb touch screen stop working?

    So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?  

    If the reset does not work try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT201412 Iphone 4S screen stops working from time to time

    Iphone 4S screen stops working from time to time.
    sometimes for a few seconds, or sometimes many hours.
    I've resetted it when this happens, with no luck.
    I've restored it from back up, and the problem still persists.
    What can i do?

    Hello,
    I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
    THAT was not an option!
    BUT it seems to solve my problem in the following way after trying a lot of possibilties:
    In the menue properties/help (don't know the exact english word, because I run my phone in german)
    I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
    Today the flash feature was responding to different push notes very slowly.
    By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
    We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
    the problem appeared. Switching the LED-flash off: problem disappeared!
    It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
    treated my phone very hard today to double check, but its still ok.
    @Apple:
    Please fix that issue in the next update.
    Hope, this helps you guys as well.

  • My touch screen stopped working...on my brand new replacement iPod touch.

    I recieved my replacement while on vacation in Vegas, about five days ago. My new iPod has been kept nice and safe in it's case without any bumps that could damage it. Today, May 4th, I go to school with a perfectly working iPod. On my way home, kept safe in my pocket all day, the touch screen stopped working, and restarting it didn't fix it. It's brand new, so whats wrong and how can I fix it PLEASE!

    yes i have the same problem. But also other then the fact that the touch screen doesnt register it is really dark, like there is no light bulb

  • Why did my touch screen stop working?

    Very upset my touch screen stopped working on phone new years eve.  What could be wrong??

        flakris,
    Oh no! This is not what we like to hear. I want to make sure that we are able to get your phone back up and running. Is there any kind of physical or liquid damage to the device? Can you try to press and hold the Power and Volume Down buttons until the device powers off then release (approximately 10 seconds). Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Yoga 13 touch screen stopped working after update KB3000850, please help!

    Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
    * Uninstall KB3000850 from Windows Update
    * Use Windows Restore to restore to the point before yesterday
    * Re-install Intel Chipset Driver from Lenovo official driver page
    * In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
    * Two-button shutdown and restart
    * Install Lenovo Driver Manager and let it check for new drivers
    * Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
    As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
    Can anybody help me with this? Thanks!

    Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
    I need to send Lenovo a bill for my time spent rebooting.  So far i am on my 8th reboot.  In the past, around 5 reboots after winddows update would work.  This time... who knows.
    Of course it always happens when you have a deadline.
    Please post back if you have found a better soultion than system restore.
    Thanks for posting this issue.  More users need to bring this to Lenovo's attention.

  • Wifi iPad 3 charger stopped working after updating to iOS 6, help!

    Wifi iPad 3 charger stopped working after updating to iOS 6.  The little iPhone charger charges it very very slowly, but the charger gets really hot after a while.  I restored it and everything works but the charger.  It's only a few months old, should I try a new iPad wall charger block?

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • Ipod nano 6th gen touch screen stopped working please help

    Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

    I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
    If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
    Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
    I have given up with my Nano and am now using an old model

Maybe you are looking for

  • Need help with Intel Mac mini... potential logic board failure...

    Hey everyone! For the past couple years, I've been using an Intel Mac mini which I was able to afford before rough times hit for me. It has been a champ for a long time, until recently. In the past week, the clock would lose time ever so often, and l

  • OBIEE 11G - Creation of Parent child hirarchy

    We need to create a parent child hierarchy for city wise branches In our DB we have only one table - the same we need to consider as Dimension & Fact. Attributes as follows: customername, customernumber, accountnumber,city, branch, financialyear,fina

  • Typing happens automatically in input fields

    happens at start-up to input password and in safari

  • I need help in Spanish please

    Buenas trades, mi Hijo Hijo compras en us iPad sin mi authorization

  • Dynamic change selected columns

    hi all, Created an anwers with 5 columns: level1 | level2 | level3 | level4 | facts I created a session filter on all the level columns. Like this: level1 = session.value or level2 = session.value or level3 = session.value or level4 = session.value N