My ipod classic turns on with apple logo then shuts off about 30 seconds later, when plugged in my windows and itunes will not recognize it.

earlier my itunes told me that my files were corrupted and I needed to restore, so I did.  In the middle of the restore I lost internet connection. Now my computer and Itunes will not recognize my Ipod and if it is not plugged in when I turn the Ipod on it only shows the apple logo then shuts off after 30 seconds.  If it is plugged in it will charge, but Itunes and Windows will not recognize it.  I have tried the menu + select shutoff multiple times with no change.  All it will say while it is charging is do not disconnect.

The clicking sound is your iPod Hardisk, trying to retract and find the boot sector unsuccesfully.
Hopefully, you can do the iPod Disk Diagnostic as in this great post by tt2., it wont fix your problem, but let you know, how dire is your Hardisk health.
So only as a last resort, one way, to get the stuck Hardisk head free, is to bang the iPod on a rubber mouse pad, when you reset it, but do it at your own risk, some very lucky guys got it working again for the next 14 months, like myself.

Similar Messages

  • HT1386 Just downloaded 7.2 into my Iphone 5 what a mess.  Dropped called no audible notifications for email or text messages.  Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize th

    Just downloaded 7.2 into my Iphone 5 what a mess.  Dropped called no audible notifications for email or text messages.  Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize the phone.  I have gone thur the steps for windows 7 and still nothing???  I have downloaded the newest version I itunes too. 

    Hi Midwestboy,
    If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Regards,
    - Brenden

  • No matter what i do i cant restore my iPod and iTunes will not recognize it

    no matter what i do i cannot restore my iPod to factory settings and iTunes will not recognize my iPod but Windows will (i've tried everything) please help me

    what happens when you connect your ipod to the computer?
    did you follow these procedures for reset and restore?
    Resetting
    Restore your iPod

  • Updated to Windows 8.1 and ITunes will not recognize the nano 6th generatio IPod

    Updated to Windows 8.1 and ITunes will not recognize the nano 6th geneartion IPod. I tried all the things that was listed on troubleshooting. Help

    Did you ever get help for this? I use the radio feature often and now it will not play, since updating to Windows 8.1.

  • Ipod was corrupted i restored it now windows and itunes does not recognize

    one day i plugged my 80g classic in to charge and sync. itunes diagnosed my ipod as corrupted and said please click restore,so i did now my windows computer and itunes does not recognize it at all i have a new 1g shuffle and it works fine. wat do i do with the classic cause i miss the space and it still turns on and everything. Help!!!! Please

    Start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Also this recent interesting post by a user here for a work around when an iPod is in the "recovery mode" looping state...
    http://discussions.apple.com/thread.jspa?threadID=1679535&tstart=0
    Cheers,
    Patrick

  • Windows and iTunes do not recognize my iPod..... HELP!!!!!!

    Hello!
    HELP PLEASE!!! Windows Vista and iTunes do not recognize my iPod!!   I dont understand why because everything went well for at least 2 weeks!!   But now, my Ipod only appears even more in my computer, so ITune do not recognize on.  
    I need your help before remove ITune and all Apple produces. This is what I do if I made a following Apple support but before mde this, I need your help for to see if there's something simple to try before.
    I'm open to any good suggestion!
    Thank you!
    Zazzz
    P.S. Sorry for my English, I do my best.... because i'm french.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • TS3694 mi ipod touch will not boot, it goes to the apple logo then shuts off, I tried to restore it but it shuts off while restore is going on then it saids it can not find the device

    Hello,
    I need help before i go to the apple store for help.
    My problem is that I have an Ipod touch which it was working fine but now it will not boot all the way.
    It will not show the red bar when is ready to be turn off or reboot when using both buttons to reset it it will only come to the apple logo then goes blank.
    I tried to restore via Itunes but same result, it will start showing is doing the extract then it will go blank and get a message saying that It can not find the device.
    What do i need to do.
    Thank you for your help.
    regards,
    Mario
    PS. The OS I am not sure do not remember exactly.

    - Reboot the computer
    - Try another USB port
    - Try another cable try another cable
    - Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Windows and iTunes do not recognize iPod

    Help! I have read everything in this forum and have not found the solution yet. I have the 30gb ipod video and I've had it for almost a month now and it doesnt work. I've tried the 5r's.. didnt do anything.. when i connect it to my laptop, it says its charging.. it also tells me that it would work better with a 2.0 usb, but according to the specs, it should still work with the 1.1 usb. Also, when i look at it in the device manager, it says "Location: Location 0 (iPod)" and "The drivers for this device are not installed. (Code 28) To reinstall the drivers for this device, click Reinstall Driver." but when i try to reinstall them from the cd, it says they're not there.. i'm not the only one having this problem.. from all the posts.. is it possible its the cable? I dont have another computer to try it on.. HELP!

    Frustrated Mom,
    I am having the exact same issue. It all worked fine
    yesterday (the first day I used it) and now today
    there is no recognition on either
    computers...anywhere. I called the Apple S.O.S. line
    and they took me through all of the possible fixes.
    Nothing worked. In the end, they suggested that the
    iPod is faulty and I should send it in to have it
    repaired. I just got it yesterday so I will be
    calling MacMall back for an exchange, otherwise I
    just paid full price for a refurbished item. Not
    cool.
    Good Luck,
    Doug
    I had similar problems with my office Dell (Windows XP). My 60GB Video iPod works fine at home with my ibook, but when I first used with iTunes on this Dell I could only get it to intermitently recognize the ipod the first day. The next day the PC would recognize it was in the USB in that it showed up in the lower bar of devices to remove, and it would run the ipod service program and then start itunes (still does this) but it would not show up in itunes any longer or as a drive any longer in Mycomputer. On the other hand in an identical Dell in office nex to mine I was able to use it fine the last 3 days when it no longer worked on my office Dell.
    After some experimentation the fact that the iPod service runs when I put my iPod into the USB port and then runs iTunes shows the PC sees it. And I can eject it via the device eject icon on bar at screen bottom. I determined the reason the Dell in other office sees it while the one in my office no longer sees it in iTunes is likely due to the fact that I do not have administrative access to my PC and iTunes is not installed as my default application. The Dell next door has iTunes installed as default application for music and thus I have no problems.
    It shows my iPod is ok but the PCs (not my ibook) vary in response due to minor differences (such as not being default application for music in my case --at least that appears to be cause which I will test later when I get my itunes set as default application). You may want to look at issues with iTunes rather than the iPod being faulty?
    Russ Jacobson

  • My Computer and Itunes will not recognize my ipod

    I recently had to reinstall itunes on my computer. Now, my computer and itunes won't recognize my ipod. But I can change it from my computer. Does anyone have any suggestions on what I should do? I would really like to update my ipod!
    Thanks.
    nb

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Still no joy, see these.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    When restoring the iPod, put it into disk mode first.
    Putting iPod into disk mode.

  • Phone will show apple logo then shut off

    my phone will shut off after the apple logo is showing while trying to turn on the phone.

    Since this is considered accidental damage. It is not covered under the manufacture warranty.
    The current prices apply for accidental damage repairs of the iPhone
    Model Type Accidental Damage Repair
    4GB Out of Warranty Repair $199 Accidental Damage Repair $199
    8GB Out of Warranty Repair $199 Accidental Damage Repair $249
    16GB Out of Warranty Repair $249 Accidental Damage Repair $299
    Call 1-800-694-7466 to setup repair. or Call your local Apple Retail Store for more details

  • COMPUTERS AND ITUNES WILL NOT RECOGNIZ MY IPOD NANO

    MY NANO IPOD IS NOT RECOGNIZED BY MY COMPUTERS OR ITUNES.   WHEN I TRY TO SYNC IT IS IN GREY AND WILL NOT LET ME SYNC

    Have you tried looking at the system requirements? It might be that you have an old version of itunes or operating system
    Here are the system reqrements for an iPod nano 7th gen
    Mac computer with USB 2.0 or 3.0 port, OS X v10.6.8 or later, and iTunes 10.7 or later4
    PC with USB 2.0 port; Windows 7, Vista or XP Home or Professional (SP3) or later; and iTunes 10.7 or later
    Internet access required; broadband recommended; fees may apply

  • Phone stuck in recovery mode complete black screen will not turn on after recovery and update there was an error and now computer and itunes will not recognize the phone....Anyone know what I can do to get the phone recognized again when it cant be turned

    Phone was not updated on time so it automatically shuts off and you get a plain black screen until it is recovered and updated. Well when i did the update and recovery I received an error. I went through the steps to fix the error, I had to restart my computer and now the phone isnt recognized on my computer or in itunes. The screen is still completely black so pushing the home button and plugging in to computer still does nothing. Device manager shows nothing in usb port, and apple mobile device software is installed and running. Any help?

    Hello agardner37701,
    I found some steps you can take when your iPhone is not recognized by iTunes when in Recovery Mode.  I recommend reviewing the steps in the section titled "If the device is not recognized while in Recovery Mode" under step 5 in the following article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My 2nd Gen iPod touch would not finish backing up to update to 4.2 firmware. So I tried to restore it, and it failed to restore. It shows the "Connect to iTunes" logo and iTunes will not recognize it. How can I get iTunes to recognize it?

    Please help.

    Think I got it figured out... I missed the whole "sync apps" when my iPod was connected to my computer (in iTunes)

  • Hi, I have an Iphone 4 that switches off every time I disconnect it from my charger. If connected to my PC it switches on (apple logo) then switches off again continuously. When powered wifi, bluetooth and cellular network are all inop?

    As the device is cut off from any sort of means of data transfer I cannot backup any of my Photos (ive just had my first child so there are loads on there). Im receiving a replacement phone from Vodafone UK on Monday but they have told me there is no way to back them up from one device to the other. Ive also contacted the Apple 'premium' retailer in my hometown who also said there was nothing they could do.
    Advice would be much appreciated. Thanks

    Anyone?

  • ***FIX FOR Windows and iTunes do not recognize iPod***

    For everyone who has a new ipod and windows isnt recognizing it or giving you the message "new hardware found" and then telling you the drivers are missing follow these steps (thanx mrlogs!!!)
    1. go to www.driverguide.com and sign up (for free)
    2. download usbstor.sys & usbstor.inf (and take note of where you download them to)
    3. update drivers by selecting folder you downloaded the two files to
    4. restart computer
    5. open itunes and then connect ipod
    it took a couple seconds for my itunes to recognize the ipod, but it finally worked!!!
    -jackie
    hp laptop   Windows XP   30 gb iPod video

    how do you update the drivers? i downloaded the files and unzipped them but when i click on them winzip appears again and i do the tasks to unzip and it saves in a new folder made. is this all i have to do? i really need my ipod to work pleasssee help

Maybe you are looking for

  • ITunes could not back up the iPhone because the back-up could not be saved

    I updated my 3GS to the 4os software and after the sync was complete All seemed okay but I am not able to use my camera nor am I able to access my photos on my iphone. It says "updating library" and then closed out of the application. I just tried to

  • "Save As" in created PDF

    Hello everyone, I am fairly new to using LiveCycle Designer. I've got about a week of experience under my belt here, and I've made a few different PDF forms. One in particular, is a 2 page form that will be used by my co-workers as a general work for

  • Substitution for Tax reporting date

    Hi, I have created a substitution at document header level to change Tax Reporting date field. It works correctly when I enter a fixed value or another field value, but when I enter a user exit it does not work in VF11 transaction Which could be the

  • MX version 6.0... is that MX 2004?

    I'm searching for the update to Fireworks MX version 6.0. They have updaters available for MX 2004 (version7.0, version 7.0.1, version 7.0.2) and also Fireworks 4.0.2. I can not find any documentation stating that version 6.0 is applicable in either

  • "Best Practices" for using different Authentication Schemes ?

    Hi We are using different authentication schemes in different environments (Dev/QA/Prod). Changing the authentication scheme between the environments is currently a manual step during the installation. I am wondering if there are better "Best Practic