My iPod Nano 6th gen will not restart?

My iPod Nano 6th generation will not start, after being recharged, My PC doesn't recognize it and it's screen doesn't alight,
can anyone help?
greengra55

If the solutions found in the article iPod not recognized in 'My Computer and in iTunes for Windows, take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you. 

Similar Messages

  • My ipod nano 6th gen will not sync.

    My ipod nano 6th gen will not sync. I have uninstalled and reinstalled itunes; I have reset the nano; I have used a different USB port and connector; I have rebooted my computer. Any suggestions?

    I just did the same. Spent at least two hours trying different actions. Then uninstalled and reinstalled itunes. Also used a different USB port, etc. Also rebooted computer.   No option for syncing is showing up on Itunes and when I run diagnostics it says there is no device detected- yet it is plugged into a USB port and the screen on the Nano says connected. HELP

  • IPod Nano (6th gen) will not sync.

    Okay, I have an iPod Nano (6th generation) that won't sync. I've reset the iPod many times, uninstalled and reinstalled iTunes, done all the suggestions given by the troubleshooting assistant, and still nothing. When I plug it in, it turns on and begins charging, but the computer doesn't do anything. It doesn't make a little sound, it doesn't say it recognized a device. It just does nothing. I'm not in a serious rush to fix this, but I recently got some new podcasts that I REALLY want to sync on there. Does anybody have suggestions? I seriously need help.

    I just did the same. Spent at least two hours trying different actions. Then uninstalled and reinstalled itunes. Also used a different USB port, etc. Also rebooted computer.   No option for syncing is showing up on Itunes and when I run diagnostics it says there is no device detected- yet it is plugged into a USB port and the screen on the Nano says connected. HELP

  • Ipod nano 6th gen will not conect to Itunes

    I need help quick!

    Hey CorineNL,
    If your iPod not recognized by iTunes or computer, I would follow the directions here:
    Follow this troubleshooting assistant.
    Also see these articles for further assistance:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod not recognized in iTunes and Mac desktop
    from: iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • IPod nano 6th gen will not charge or sync

    iPod nano with neither charge or sync.  I have reset and run through all the troubleshooting suggestions.  I have used different cables, power blocks, tried plugging into both USB ports on computer.  All software is up to date.
    Nano will play and everything operates but power is diminishing.
    Any suggestions I have not thought of?

    Just tried again after an hour and the situation seems to have resolved.

  • My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manuaaly changed. All updates are current.

    My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manually changed. All updates are current.

    I had this issue with my 6th generation nano.  It was driving me nuts, until I realized that somehow locked the repeat button on. Selecting one song rather than a selection will cause whatever song you have selected to play over and over and over and over..

  • Ipod nano 6th gen is not recognized by itunes on a PC running Windows XP professional SP3, itunes 10.2

    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes (but it shows on my pc as a hard disk) weirder still, my ipod nano 3rd gen works just fine on this computer.
    Whats wrong? HELP!!!
    I have spent 3 days messing with my pc and have made no real progress.

     
    gltg wrote:
    Running Windows XP professional SP3 and itunes 10.2.
    I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
    I have spent 3 days messing with my pc and have made no real progress.
    Then it's time to call Apple tech support while you are still under warranty.  Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase.   If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

  • HT1459 MY IPOD NANO 6TH GENERATION WILL NOT TURN ON I GOT IT FOR CHRISTMAS AND PLAYED THE RADIO ON IT WITH OUT PLUGING IT INOT ITUNES AND I WAS WONERING HOW TO FIX IT ?

    hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes

    Hi meganisawsome,
    If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
    Apple Support: Charging your iPod battery
    http://support.apple.com/kb/HT1384
    If you are still having issues after charging, you may want to look at this article:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Regards,
    - Brenden

  • My ipod nano 6th generation will not turn on.

    My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?

    Hey s.mccarter2010,
    Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPod won't turn on
    If you have tried the solutions above and iPod still won't turn on, check the following:
    Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
    Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
    Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
    If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls

    any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !

    Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.

  • My ipod nano 6th generation will not work connected to my car radio?

    my ipod nano 6th generation will not work connected to my car radio? My wife's ipod nano 4th generation works perfectly.

    Hey CorineNL,
    If your iPod not recognized by iTunes or computer, I would follow the directions here:
    Follow this troubleshooting assistant.
    Also see these articles for further assistance:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod not recognized in iTunes and Mac desktop
    from: iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • My ipod nano 6th gen will only turn on when plugged into a power source.

    My ipod nano 6th gen ONLY turns on when it is plugged into a power source. As soon as I unplug it, it turns off. I also tried to reset it and it did not help. Any suggestions? 

    Howdy mela1223,
    If I understand correctly your iPod will not stay on unless you have the charger plugged in even after resetting it. Normally this would indicate a hardware issue that would need a repair but to cover all the bases before that, the last troubleshooting that can be done for it would be to restore it with iTunes on a computer. 
    Restoring iPod to factory settings - Apple Support
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage. 
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Ipod Nano 6th Generation will not turn on.

    My brother bought my mother the new Ipod Nano 6th Gen as a gift yesterday. We plugged in to charge (like the instruction booklet says) and found the Ipod wasn't turning on. Everything on the computer and syncing side works. We managed to register the Ipod and everything like that but when it comes to controlling the actual Ipod, it doesn't seem to be working.
    I have tried resetting (Volume Down Button + Sleep/Awake Button) it but still nothing.
    The repairing Ipod has been cast on me which is unfortunate because my mother doesn't take things breaking very well and I would rather sort it out for myself than have to hike up to my nearest Apple Store for the Genius Bar to look at it.
    I would like to know if this is a problem with the screen or with the actual power in the ipod.
    The tiniest of help and I would be very greatful. thanks,
    Ross Jordan.
    ps. it has been charging for a good 3/4 hours now.

    If you do a restore on it from itunes on your computer and it still does not work....then it's a defective unit and you'll have to take it in for an exchange.
    Try to restore first before taking it in.
    Here is how you do it:
    http://support.apple.com/kb/HT1339
    Good luck!
    M.

  • My ipod nano (5th gen) will not show up in my computer or in itunes, what shall i do?

    when i plug my ipod nano (5th gen) into my windows 7 laptop it makes the noise to say that it has connected with teh usb port but does not show up in my computer or itunes? i dont know what to do but have already tried the troubleshooting guide on your website...

    Does the iPod appear in device manager when you plug it in? If not, what appears there?
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

  • My ipod nano 6th gen is not recognized by any computers, I've tried restarting it, resetting it, restarting the computer, any number of stuff it says on here, but it is still unrecognized by either my computer or my roommate's computer.

    Hi all!
    I have a 6th gen ipod nano. I wanted to sync it to get some new music onto it, but my computer won't recognize it. I've tried restarting it and resetting it numerous times, both plugged into the computer and not. I've confirmed that both the Apple Mobile Device service and iPod services are running. I've updated my itunes, I've updated my virus software (I highly doubt that is the problem, it's the same software I've always used and my iPod worked fine before) and I've tried any multitude of ******** "fixes" you can find in this forum or anywhere else on the web.
    The ipod does charge when I plug it in, and I've tried 2 of my roommate's cords, so that isn't it either. My USB drivers are also up to date and work just find with anything else, including my printer, my cellphone, etc.
    so... anyone have any suggestions?
    Oh, I'm also running a Dell Studio 15 laptop with Windows 7.

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Maybe you are looking for

  • HT2500 How do I add a disclaimer footer to my email signature?

    How do I add a disclaimer footer to my email signature?

  • Problem with GUI_UPLOAD using excel sheet

    Hi,   I am trying to upload excel sheet thru GUI_UPLOAD ... this excel sheet has a header line and 3 line of data. Even if I remove the header line then also the internal while debugging is showing 28 lines of entries with "#" "squares" in some colum

  • How do I install Adobe Flash on my new Macbook Pro 2013?

    I just purchased a MacBook Pro laptop today and I have attempted to download Adobe Flash on the computer - installation says it is complete but when I visit websites the flash still does not work. I am completely new to Mac - am I doing something wro

  • Error in component quantity while exploding BOM

    Hi We are facing error while exploding BOM i.e. the component quantity is 11.111 YD  in cs03 but while exploring in CS13 we are getting component qty as 12 YD Note : there is no rounding value maintained in the material master  waiting for your valua

  • Log & Transfer from Sanyo Xacti

    I submitted this question to another topic, but I think it needs its own. I have just bought a little Xacti HD2000, mainly as a research tool, but there are times when I want to include shots in a HDV project in FCP7. The Xacti offers a range of form