My mac os x 10.5.8 is coming so slow, my harddisk kapazite is 140 GB, and free is 85 GB. Why is slow or what can i do?
hi my mac book is so slow, or coming slow. 85 GB is free HD, from 145 HD.
can sombody help me?
thanks Vijay rom Switzerland
Try here > Why Is My Mac Running So Slow? [MacRx] | Cult of Mac
The startup disk may need repairing.
Launch Disk Utility located in /Applications/Utilities
Select the startup disk on the left then select the First Aid tab.
Click Verify Disk (not Verify Disk Permissions)
If the disk needs reparing, follow the instructions for Using Disk Utility to verify or repair disks
Similar Messages
-
I have been using firefox aurora 7 for mac. Most of my handful of add-ons have been disabled -- including Read It Later and Feedly, which I was making good use of. Can you tell me when they will be enabled for firefox aurora 7? Maybe I should go back to firefox 6
You can use the Tab key to select a search engine on the bottom bar and press Enter to use the search engine to do the search.
*https://support.mozilla.org/kb/Search+bar
In the current Firefox 34 release there is a new "one-off" search bar.
This search bar doesn't show the name of the search engine and a logo.
You can type one letter to make a drop-down list appear where you can see suggestions and see the used search engine and that also has bar at the bottom where you can select other search engines that are enabled via the Search tab in Options/Preferences.
You can use the Tab key to select one of the other available search engines and press the Enter key to search with the selected search engine.
Click the search engine icon and click "Change Search Settings" to open the Search tab in Options/Preferences (positioned between Tabs and Content) to select the default search engine and select which search engines to show in the search bar drop-down list that opens when you start typing search terms. -
my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?
Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot. -
Hi...please help me. I just got a Mac Pro yesterday and did not set up a password at apple now it is asking me for one to download flash player plug in. what can i do?
Shootist007 wrote:
You must of set a password on the computer when you kfirst turned it on. Otherwise you wouldn't be using it.
What I think you are talking about is a user name and password for an Apple ID.
Apple IDs use a email address and a password you create for that email address on Apples website.
There should be a link on whatever page you are on to Create an Apple ID. Click that link.
Or just open App Store from the link on you Dock then Find the link to create an Apple ID.
Absolutely not. You can create a blank password. Yes it's stupid. Yes it's unsafe. But from helping people with their Macs, I find most do not set up a password. <facepalm> -
2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.
Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
hi im new apple ,ac book pro user ..Bought a mac 3 weeks before my mac does not show serial number on screen .Also I am unable to sign in imessage n facetime it gives network error like though i can access web site n etc .! What can be this issue n how to solve it??
Hi,
If the machine is brand new I don't see why the serial Number is missing (it is entered on to a special chip at the factory)
However if the machine is a return and has been refurbished then the Logic/mother board may have been changed and someone forgot to put the info back to the new board.
for the Points
7:44 pm Thursday; January 16, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
my mac mini failed to burn a playlist onto a blank cd, and now it will not eject the blank cd.
leonardfromlancasterIf you can't eject a CD or DVD or open the drive tray
How do I eject a defective DVD?: Apple Support Communities
How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
How force eject disc: Apple Support Communities
Download ForcEject Tool for Mac - Force-ejects discs stuck inside SuperDrive. MacUpdate.com -
Migration Assistant has been running since yesterday evening. My Dell is now telling me that its trying to reconnect to my Mac and to ensure they are both using the same network. I have an Ethernet cable plugged in them and they are both on the same WiFi. What can I do?
Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource -
Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of engine noise! The noise disappears in sleep mode. What can be done?
I bought it from Other World Computer last week for $95. 3rd party, I suppose.
-
i want to reset the password on mac 10.8.4m but i have selected the "allow the user to administer this computer" i have make test with utilities and than terminal... but doesn't work.
what can i do in this case.
thank youYou have to boot to the Recovery HD, Command + r at startup, and from there use Terminal in the Utilities menu item and typ in Resetpassword. A dialog box will open where you can do that.
-
i bought lightroom 4 in march'14, i was using it in pc but now i have mac and it doesn't accept the serial number. What can i do
Make sure you are using the correct serial number starting 1160 (24 digits comprising all numbers and no letters)
If in doubt you can check from your PC version. Launch LR and from the menu click:
Help >> System Info -
I have been given a mac os x version 10.4.11 and cannot get a flash layer update to download what can i do ? please help!
Is this a Power PC based mac? If so, please see this FAQ:
What version of Flash Player should I use with my Power PC based Mac? -
Apple Mac 27ich not loading up got a circle and apple logo flashing then makes two bleeps sound
What can I do my mac 27 inch is showing circle and apple logo flashing also bleeps twice can anyone help plsMac computers- About startup tones - Beeps
Intel-based Mac Power On Self Test RAM error beeps -
Cinema display 30" no longer recognized by my mac pro. Until now it worked without problems, then after a crash it fails to recognize the display.
Now it runs in a far lower resolution. What can I do?
I tried to get da driver for it, but could not find any.Try the other DVI port on the graphics card. On early Mac Pros, only one port is the dual-link DVI needed for full resolution on the 30" display. Make sure the display's USB cable is plugged into the computer.
-
I bought the wrong update, I need a Mac-Version but ordered a Windows-Version. What can I do?
Since this is a user to user help forum, not Adobe support or sales, nobody here will be able to help... you must talk directly to Adobe
Information for anyone else with a similar problem
Adobe contact information - http://helpx.adobe.com/contact.html
Help for Download & Install & Setup & Activation http://forums.adobe.com/community/download_install_setup
Next link has a "Chat Now" button near the bottom http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Maybe you are looking for
-
My c6180 wont print on kodak ultra premium high gloss paper but will print on plain paper
my c6180 wont print on kodak ultra premium high gloss paper but will print on plain paper. am i doing something wrong? I've never used the printer to print pictures.
-
RH_RELATION_MAINTAIN/RH_INSERT_INFTY
I am trying to insert a new HRP1001 Cost Center record in a program and have been trying to use the above Function Modules. The problem I am having is that when they encounter a CONFIG problem, like the Cost Center is not open for posting, instead
-
How do I select which pictures will be shown on transition album 1 or album 2?
Working with IMovie using still shots not video. When I insert the transition of titled "album 1" or "album 2" ect.... I would like to select which pictures are shown in than transition. Is there a way to do that?
-
Hi, I'm having problems restoring my Ipad after it was disabled due to too many wrong pin entries. I have tried using the restore option in itunes but keep getting the error message "The iPad software update server could not be contacted" even althou
-
URGENT - how do I convert and image from colour to black and white?
Hi, I'm new to Java, and I really need some code to convert an image from colour to black and white! I would really appreciate any help, but since I don't know much about Java I would prefer some code or links to websites with the code. Thanks!!!