My nokia c5-00 is Unable to Unlock phone, please h...

settings>settings>general settings>security>phone & sim card>phone autolock period> " there i couldn't able turn it to none the settings" please help, when i click that it show "unable to unlock phone" please help me for that..

Hi tiger_dragon,
I'm not sure what way to 'unlock' the device you are looking for.
If you want to unlock the device from your operator so that you can use the phone with a SIM card from another operator, you will have to contact your operator and ask for an unlock code.
If the phone itself asks for a security code when you're trying to change your security settings, this code is 12345 by default. If 12345 code isn't accepted it will have been changed. Please visit a Care centre in that case where the security code can be reset for you.
Please make a back up with Nokia Suite before you visit a Care centre to make sure you won't loose any data. You can create a back up via Tools > Back up.
Hope this helps, let me know how you get on.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Similar Messages

HT4061 unable to unlock phone as it is asking for a password i do not have

unable to unlock phone as it is asking for a password i do not have?

Hi Danny,
You will need to follow the instructions in the support article link below that best apply to your situation:
http://support.apple.com/kb/HT1212
Good luck!
Cheers,
GB

Unable to unlock phone -- How to backup photos when touch is not working

Hello Experts,
My HTC 8X running windows phone 8.1 update (dev Preview) had some password unlock attempts in my pocket and now its currently on the screen where its asking me to enter A1B2C3 to try to enter the password again.
My problem is that the left side of the touch screen is not responding so i am unable to type 'A1'
Is there ANY way I can unlock my phone and take a backup of the pictures on it.
I don't want to reset my phone as I have very important pics on it and I didn't turn on the auto upload feature of pictures to OneDrive.
Please help as I really cannot reset my phone and delete the pictures.
Please note that the phone is getting detected on the computer but I am unable to see the storage to do a backup.
Thanks in advance
Digvijay
Thanks, Digvijay Nath

Hi everybody.
I have the same issue on a Nokia Lumia 925. Yesterday the screen stopped working, due to an accident. The phone is locked with a NIP so I cannot unlock it and when I connect it to the PC I cannot see its data, which is not saved on OneDrive by the way. The
Windows Phone App on Windows 8 asks me to unlock the phone to see its content, but I cannot do that since the screen is broken, and the Windows Explorer on Windows 8 (and XP also) recognizes the phone correctly but cannot display any of the files on it. It
says the device is empty.
I understand that I need to send my phone to have its screen replaced or fixed, but I sure do not want to delete its files, and would like to backup them before I send away my phone, specially the pics and videos. Maybe on these months you have come up with
a way to do that I guess?
Thanks in advance, regards.

IPhone 5 Unable to unlock screen Please help?

Iphone 5 screen not responding to swipe to unlock. I have restored the phone as per previous discussion posts including the newest update, Synced with ITunes
,still just getting the Hello which is scrolling across screen in different languages. Unable to swipe to unlock?

minhquan4795 wrote:
I just need to find the owner of the iphone 5 have this imei <edited by host>
You got the iPhone from him. You know how to contact him.

Help with unlocked phone please and thank you

I recently bought a used Iphone 3gs off of a friend who had it "unlocked" for a non- iphone carrier, any-who I just happend to use the carrier that the phone was originally locked for phone and would like to upgrade to ios5 I know that it will delete all of the hacks or what have you and I'm okay with that... I just need to know if this will mess with my sim or my data that's stored on the phone? Any help will be greatly appreciated.

So wouldyou recommend that I update? It was made for use with an att sim but was unlocked for use with a tmobile sim... I just so happen to have att. So the phone being locked for att wouldn't be a bother for me. I've just heard of people getting sim card read errors after updating, so I was wondering if I should even bother.

Unable to unlock iPhone 5 while phone is locked in VoiceOver mode.

Used the accessibility VoiceOver feature for playback while driving. Was unable to unlock phone. Pressing the triple-click feature did not work. The timeout feature disabled the phone from 1 to 60 minutes with each unsuccessful pass code attempt. Dreading having to reset my phone I connected to iTunes. I was able to turn off the VoiceOver feature using the configure universal access feature and unlock the phone.

I own my iPhone 5 since it first came out in fall of 2012. I have never had an issues with the phone dropping WiFi until last month when two weeks into my biling cycle I have received notification from my carrier that I've burned through 75% of my 2G data plan. At first I thought that maybe I have left some apps running and didn't pay attention to what was occuring. So during the next billing cycle which started 10 days ago, I reset the cellurar data usage legend on the phone and kept a close eye on data usage. My phone is on wifi 99% fo the time. When I am not of wifi I only refresh my email account and check the weather. Prior to the last month, I usually use about half a Gig a month. As I've tracked my data usage with my carrier this current cycle, I found there are numerous cellular data usages during the time that I was connected to wifi. I find myself turning off my cellular data which is ridiculous. I know it's not my router, because when I used my friend's wifi, the phone still registered cellular data usage. It was all small amounts during each time, but 10 days into my billing cycle and my phone burned to 1G of data!! I still have 3 weeks of cycle to go. I've also completely rebooted my phone by erasing and reinstalling the iOS. Which btw, did not help. I cannot believe that others have reported this issue and Apple hasn't addressed it yet. The phone seems to be dropping wifi when in sleep mode. This is not normal as I've owned the phone for over a year and haven't had any troubles until last month. Does anyone have any updates on how to deal with this issue without replacing the phone?

HP encrypted drive :Unable to unlock media

Hello,
I have encountered a problem which caused me unable to access my laptop.
When i start my pc yesterday, after key-in my password at WinMagic screen(which is the screen before Windows start), then a pop-up shows "Unable to unlock media, please re-try after the computer restart"
So i did, but the outcome are the same with same pop-up message.
I tried searching on google and found one relevant case saying that i will have to leave my lappy for 4 days, 2 for the drive itself to encrypt and 2 for itself to decrypt.
Other case says that only HP recovery can help to restore my access yo Windows.
I do not have recovery file and that i do not want to lose all my data, please advise me what to do to resolve this issue.
Thanks so much.

I logged a support ticket about this issue. This is what i got back after a couple of weeks. I never went thourgh the whole thing as the user i had the issue with just backed all there data up and we whiped the drive and reinstalled. But see the below. The username and password probably dont work anymore but you can atleast use the below to get hp to help out. Sorry i dont have the file anymore from that ftp either. There are alot of images that go with the below as well but i just copyed the text. Thank you for contacting HP Customer Care Centre.This e-mail is in reference to theWe appreciate your patience while troubleshooting and resolving the issue. Issue: Drive Encryption Issue Please try the below steps and download the tool from the below link: FTP Access : ftp://temps2er:[email protected] Drop Box Host: h2.usa.hp.com (15.201.164.55, Failover: 15.240.92.59) Login: temps2er Password: ma!PC3zp (NOTE: CASE-sensitive)Its strongly recommended that the hard drive is backed up prior to repairing. This is an encrypted hard drive and will need to be backed up with a disk duplicator or drive dock, performing a sector by sector copy to another hard drive.Obtain the SDWmgRecovery.exe tool and SD WinPE ISO from Third Level support.Attach the encrypted drive as a secondary drive to a computer with Windows 7 (x64 bit) or Windows 8.X (x64 bit) that can boot to Windows.Once the drive is attached determine which driveletter is the encrypted drive and where the WinMagicSECURDOC.WMG file is located. Typically this is a hidden file and an OS file so check the file attributes to view and make a note of the path and the filenameWMG file.
Figure 3. WMG FileRun SDWmgRecovery from a CMD prompt in Windows with no switches and note the message it reports. If the report indicates the WMG file is contiguous and linked correctly, then proceed to step 6. Otherwise proceed to step 5.
Figure 4. WMG File contiguous and linked correctly message
NOTE: If help is required for proper switch usage, refer to Figure 5.
Figure 5. Switch usageThe following command repairs the SDSpace and re-links the MBR:
SDWmgRecovery -w "g:\WinMagicSECURDOC.WMG " - f (Assuming G:\WinMagicSECURDOC.WMG is the location of the WMG file).
NOTE: Forcing the update should not harm the hard drive. It it recommended to run the -f command to verify linking.After the initial error is corrected, install the drive back into the original computer, attempt to boot from the disk and login to Windows. At this time, the unit may start and allow a sucessful login. If this occurs the repair is completed. However, the computer may display a BCD error. If one of the following BCD errors are displayed, continue to step 7:
Boot\BCD error Status: 0xc0000098
Or
Boot\BCD error Status: 0xc000000fTo resolve the BCD Error, obtain the SD WinPE bootable disk ISO from third level support. Boot from this CD in the computer with the encrypted drive installed as the primary hard drive.
NOTE: For Microsoft Windows 8 and 8.1 computers, disable Secure Boot within the F10 BIOS setup. Also switch the Mode from Native to Hybrid to allow the computer to boot from the CD.Navigate to the TBLauncher.
Figure 6. TBLauncherRun the SecureDoc Recovery Plugin then click the users drive in the Disk Status screen (Usually Disk 0) to expand the drive and show all the partitions. One drive partition should show a key by it at this time. If it does not, as shown in Figure 7, perform steps 2 – 5 again, or you may want to engage 3LS for assistance.
Figure 7. SecureDoc RecoveryUnlock the encrypted partition. Use one of the following methods to unlock the encrypted partition.Use the customer´s login name and password to unlock it.Use the original backup DAT file to unlock it using the following steps:a. Select or highlight the encrypted partition.Click the Unlock buttonSelect the correct Disk, User, and enter the customer´s password or click the keyfile tab and specify the location where their backup.dat file is located.
Figure 8. Location of status and disk
Figure 9. Select disk and enter passwordOnce the encrypted drive is unlocked, the following message will be displayed:
The media was unlocked successfully
Figure 10. Unlocked messageFrom TBLauncher, Run the Q-DIR utility and verify which drive is the System Partition, and the proper path to the Windows folder. Typically the C partition is the System drive, and d:\Windows is the path to the Windows folder but this can vary from drive to drive.
Figure 11. Q-Dir utilityFrom the TBLauncher, launch a CMD prompt and use the following command to repair: (Assuming the C drive is the System partition, and the D drive has the Windows folder on it).
Bcdboot d:\windows /s c:
Figure 12. Repair commandEnsure the message "Boot files successfully created." is displayed after running the BCD Boot command. If the message was not displayed, review the previous instructions , the drive was not unlocked or the command may have pointed to the wrong drive letters and paths with the switches.
Figure 13. Success messageIf a successful message is displayed shutdown.If any F10 settingswere changed in step 7, configure them back to theoriginal settings.
NOTE: Do not restore defaults.Start the computer and attempt to login to Windows.

Apple unable to unlock replacement unlocked iPhone 4S

This is especially important to anyone who purchased an unofficial unlocked iPhone 4S in the USA with an AT&T micro-sim rather than the official unlocked iPhone 4S SKU packages (starting on 11/11/11).
On Oct 17th I purchased a 32gb iPhone 4S at an Apple store in North NJ. The phone was purchased at full price and was indeed unlocked. Unfortunately, the microphone crapped out after one day.
Oct 19th I get a replacement that functions perfectly unfortunately the phone was locked to AT&T. Apple tried feverishly to unlock the phone through their engineering department. The phone was listed on it's profile as "unlocked", but the phone was still locked. The consensus was it was an unforseen issue to an unforseen problem that wasn't anticipated so there was no way to resolve it at the moment. The solution was to return the phone and repurchase another.
Oct 21st I return the replacement phone with the box from the original phone. They bring me a new phone, open the box and hand me the phone. The phone was unlocked.
Oct 31st I get home from a trip and to make a long story short, I break the screen on the unlocked phone. I am unable to get a replacement for my iPhone from any Apple store in my area at this time.
Nov 2nd Apple sends me a replacement they assured me would be unlocked.
Nov 3rd I receive a locked replacement from Apple.
Without going in to too much detail; I spoke to every level of advisor, an engineer for several days following the receipt of the locked replacement and they assured me they would be able to unlock this iPhone by placing the serial number into a database which affirms the unlock every time the phone is synced.
Again, I was assured this would solve the issue of activating the unlock. However it was finally determined (on Nov 11th) that something is inherently wrong in the system. The senior advisor I spoke to yesterday said that the issue I am having has already sprung up a handful of times with similar results. His resultion was for me to go to the Apple store (he made the appointment for me and spoke to the manager of the store) and return my phone and purchase a factory unlocked iPhone 4S.

Believe what you want. Maybe it wasn't locked down from the moment of sale, but it was sold as carrier locked to AT&T.
Similarly, news has broken recently that the SIM slots in phones sold on Sprint were unlocked out of the box, but Sprint would be locking them down effective yesteday.
Any phone that came with an AT&T SIM card was not meant to be unlocked. It may have taken some time for Apple/AT&T to pur the serial numbers in the system and get them locked down, but they were never advertised or sold as unlocked. I don't know why Apple would spend so much time on this with you frankly, as unlocked phones did not officially become available to order in the U.S. until yesterday.
Perhaps, now that there is one model of iPhone in the US that for the first time, is available on multiple carriers, They are ALL unlocked on the shelves and are being fed into the database to be locked down at the time of sale. This is the way it has worked in some countries for a while (where there were multiple, supported, GSM carriers).
Either way, you're not going to find much in the way of sympathy here, since Apple did not advertise or market the unlocked iPhone in the US at the time you bought yours.
If you bought your phone on October 17th, then you have 5 more days left to return it for a refund. I sugest you do that and purchase an iPhone that is actually marketed and sold as unlocked instead.

Mysterious files being created in pages. Unable to unlock or delete them.

Mysterious files being created in pages. Unable to unlock or delete.

It turns out that you cannot update or delete a Syndication Map that is currently assigned to a Port in the Repository. You must remove the map from the Port in the Repository and then you can change and/or delete them.
1) bring up the MDM Console
2) Unload the repository
3) drill into Admin ~ Port
4) Remove or change the map associated to the port
5) Load the repository
6) Then you go into Syndicator and either Update the Map or Delete it
It had nothing to do with security.
Thank you for your help.

System unable to unlock login keychain

I had a very unfortunate problem with adware this morning and used Adwaremedic to remove it. The program prompted me to restart after removing the adware. Now when I log in to my account I have two windows -- one tells me the system was unable to unlock my login keychain and gives me three options: continue login, create new keychain, and update keychain password. The other window says 'calendaragent wants to use the login keychain'. If I hit cancel, then it pops up again with different programs that want my login keychain such as addressbooksourcesync or com.apple.icloudhelper.xpc. I'm not sure whether or not I should trust this and put in my password.
Anyone here had a similar experience?

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Hi, unable to unlock my i pod touch,

Hi, unable to unlock my i pod touch, the pod says connect to itunes, but wen connected to itunes it says unabe to connect without passcode

You need to place your iPod in recovery mode and restore it via iTunes on your computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
You could have found this solution is you would have searched the iPod Touch forum since the same question gets asked many time each day.

I am unable to unlock my computer?

I was able to unlock my MacBook Pro and then closed it and am now unable to unlock it. Help please!!!!

More details please...
What does 'unable to unlock it' mean? Do you mean
- there is no login window
- there is a login window but I can't enter anything
- there is a login window, but when I enter my pwd, it rejects it
- there is a login window, it accepts my pwd, but the computer doesn't do anything after that
As you can see, there's a few different possibilties, and the help you need will be different depending on the details.

HT201407 hi i used to have O2 pay monthly contract but it ended in September 2012, since the contract expired I keep requesting O2 to unlock my iphone4. But they keep saying we are unable to unlock because of error. This is going on for 2 years. Can apple

hi i used to have O2 pay monthly contract but it ended in September 2012, since the contract expired I keep requesting O2 to unlock my iphone4. But they keep saying we are unable to unlock because of error. This is going on for 2 years. O2 keep saying they retrying and nothing happening. I am frustrated. How to unlock my phone? Can Apple help me?

No Apple cannot and this is a User to User forum ,no Apple staff here
As the carrier that locked the iPhone ,O2 are the only organisation that can unlock the iPhone
That said they are the most co-operative of all UK carriers with unlocking
Have you actually asked what the issue is and filled in their request form
and are you still located in UK ,if not that will be the issue

Unable to install adobe reader-message :unable to unlock instance count... Please advise. Thx

unable to install adobe reader-message :unable to unlock instance count... Please advise. Thx

What is your operating system & version?
Can you try downloading the installer from http://get.adobe.com/reader/direct/ or http://get.adobe.com/reader/enterprise/ ?

HT201263 Hi. I forgot my passcode and now I am unable to unlock my ipod. I tried restoring it using itunes in recovery mode as well as dfu mode but it says unable to restore,unknown error occured (3004). Please help me out. My ipod is locked for one hour

Hi. I forgot my passcode and now I am unable to unlock my ipod. I tried restoring it using itunes in recovery mode as well as dfu mode but it says unable to restore,unknown error occured (3004). Please help me out. My ipod is locked for one hour now.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

My nokia c5-00 is Unable to Unlock phone, please h...

Similar Messages

Maybe you are looking for