My printer hp lazer jet p1102w doesnt resume print through airprint when paper not available

hi
i have printer hp lazer jet p1102w. i upgraded to the latest firmware.
when paper not available in the printer and i reload it , it doesnt resume print through airprint in my ipad.
specially when i want to print on both side. i cannot resume printing. what should i do?
This question was solved.
View Solution.

Hi,
Once you have loaded the paper into the input tray, open and close the top cover of the printer. that will resume the print job and complete it.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Hp laset jet p1102w - wi fi print form iPad

I'm trying to connect the iPad 2 with the printer but I do not have wifi at home. The iPad is online via its mobile key. Is it possible to print form there anyway? Or via bluetooth ? Thank you very much

Hi @Davide75,
Thank you for responding and updating me.
If the Wireless Direct is not turned on, is the wireless radio turned on? To turn on the wireless, press the wireless button on the front panel. You will know that the wireless is on because the light will start to blink. Once the wireless is turned on, please try Printing a Configuration Page. The configuration page will let you know whether the Wireless Direct is turned on and what the name of the network the printer is broadcasting.
If the above doesn’t help please include a screen shot of the configuration page. I’ve included the How to take a screenshot post which will walk you through the process. In addition, do you have access to a computer as we may need it to get the printer set up? If yes, what is the operating system of the computer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I just connected to apple express and now my printer (hp office jet j5780) doesn't print.

I just connected to Apple Express network and now my printer no longer prints. Do I need a different driver.

If you changed routers your printer is still looking for your old one. Here is how to get it back:
1. On the front of the printer: Setup > Network > Restore Network Defaults.
2. From the same Network menu run the Wireless Setup Wizard.
3. Now, on your computer add the printer. I'd help more but cannot unless I know what operating system you are using.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can i connect IMac21.5 to HP Lazer Jet printer 4000?

i just purchased a IMac21.5 and want to install my HP Lazer Jet Printer 4000 which works great.
Where can i purchase the adapter cable?
What software or tip necessary to install.
Any help will be greatly appreciated.

Hi,
Based on the following link, get it to run on your new machine may cost more than buying a new printer (hardware) and you won't be able to find the software which works.
Laserjet 4000 series
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My Laser Jet P1102W is not printing

Hi,
My Laser Jet P1102W is not printing. I shut my computer off and then back on. Made sure that the cable of the printer is secure to the back of my computer, but it still does not print. Any other suggestions?

Try the steps in this document. If that does not resolve the issue the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Laserjet P1102w - Right side margin cut off when printing in Internet Explorer 9! URGENT PROBLEM*

Hi,
I have just purchased a new printer (HP Laserjet P1102W), and when I print a web page in Internet Explorer 9, the footer (I set to the URL) does not print at all and the header will print though the right hand edge of my entire web page is cut off (including my top right header - Pages ? of ?).
I always use Print Preview first, and in the print preview it looks perfect. I always tick the box to enable shrink to fit too. Why will it look perfect in 'Print Preview' but yet when it prints, it cuts off the right hand side edge of the page and doesnt print the footer?? I have tried adjusting margins, etc... all to no avail.
I would like to check whether others have this same problem?
I spoke to HP (UK Printer Support) and they said it is Internet Explorer 9's problem. I have left a message on the Microsodt Web forum which you can see here. http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista/internet-exploer-9-not-printing-header...
I am hoping they may release a patch / hotfix - but this has to be affecting many other users of this printer too? The more of us that complain, the quicker it will get sorted.
Any others with the same problem?
Thanks.

I spoke with Microsoft technical support via phone today. Between us - we seemed to have found the problem.
It's to do with the DPI (the font size) settings in Windows!?
I have mine set to 188% on my Windows Vista mahcine and 200% on my Windows 7 laptop.
From my Printing tests in Internet Explorer 9...
at 100 % DPI – it prints perfectly
at 150% DPI – it prints perfectly
at 200% DPI – the right side of the margin is cut off, and no footer is printed – despite it looking perfect in the Print Preview.
I am using http://uk.msn.com/ as my test print outs.
This indicates when the DPI is changed above 150%, IE9 doesn't print properly – though other browsers like Safari or Firefox do print correctly. This surely has to indicate a bug in either the Windows operating system or Internet Explorer 9?
Microsoft are going to run their own tests and phone me back tomorrow...hopefully with a solution!
Hope this helps any others with the same problem at the moment!
Would be great if HP could provide a soloution asap - surely a tweak to the Printer dirvers will fix the problem?

HP Office jet 6700 ,trying to print and it will say Printer Ready, Empty Print File !

I have a HP Office Jet 6700. I'm trying to print a document , it will say prining Untitled . The printer queue will open up and say printer is ready, empty print file,Idle.
It automatically goes into paused printer. When I try to click on the document itself in the print queue and resume print it gives the same message again.
The Power on the actual printer is flashing slowly as well.
I hae restarted my computer and shut down the printer completey multiple times and it still has not worked. I just printed something on this last night so I'm not sure what the probelm is.
This question was solved.
View Solution.

Hello there! Welcome to the forums @Chinadoll702
I read your post about the printing issues you've been experiencing on your Mac running 10.6 and your Officejet 6700. I have a few ideas in mind to get started and let me know the results and we will take it from there.
Update the Firmware on the printer: Getting the Latest Firmware and Product Updates
Power reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Make a few copies afterwards and tell me if the copies pause, cancel, do not work, etc.
Try printing from Text Edit on your Mac as well, and get back to me with the results.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How can I grant users the ability to pause/resume printing without a "print operators group" password.

Greetings,
We are running 10.8.5 on 30 machines in an active directory environment (graphics lab). The clients are experiencing a persistant error when pausing or resuming print jobs. Each time something is paused, it requires an administrator password to resume the job. Administrators are not always present so designers are locked out of all of the printers until we come in (or remote in) to authenticate.
I spoke with Apple today and they said they would not support active directory accounts and that the account must be edited by the department that created the account because the restrictions come from the Active Directory account preferences.
On the other hand, I ALSO read that I can edit this in the CUPS interface or modify it with the terminal command below, locally.
dseditgroup -o edit -u admin_name -p -a user_name -t user _lpadmin
"dseditgroup" adds the user_name to a group (in this case, _lpadmin).
And admin_name is the name of your administrator's account.
a) Must this be modified on the Active directory account or CAN I modify this on the local machine via CUPS or terminal?
b) If so, how would I grant users the ability to resume printing without an admin password?
c) If not, exactly what must be modified in the active Directory account to allow pause/resume without an admin password.
I have seen a terminal command that adds users to the print operatiors group (Ipadmin) and I have seen some info on editing the CUPS interface, If i must edit the CUPS interface to allow this, can anyone point to detailed instructions on how to make this change.
I also saw info on editing the CUPS interface but the suggestion lacked details as to how and how to return to default if it does not work.
I also saw a post with these suggestions below but without detail as to how one would carry this out.
/etc/cups/cupsd.conf
# All administration operations require an administrator to authenticate...
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
*#Require user @SYSTEM*
*Require valid-user*
Order deny,allow
</Limit>
# All printer operations require a printer operator to authenticate...
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
AuthType Default
*#Require user @AUTHKEY(system.print.operator) @admin @lpadmin*
*Require valid-user*
Order deny,allow
</Limit>
/etc/authorization
+The system.print.operator key is new to Snow Leopard and seems to control resuming and pausing a printer queue among other things.+
<key>system.print.admin</key>
<dict>
<key>allow-root</key>
<true/>
<key>class</key>
<string>user</string>
<key>group</key>
<string>staff</string>
<key>shared</key>
<true/>
</dict>
<key>system.print.operator</key>
<dict>
<key>allow-root</key>
<true/>
<key>class</key>
<string>user</string>
<key>group</key>
<string>staff</string>
<key>shared</key>
<true/>
</dict>
I have read all posts on this subject and I still am not clear on how to proceed, please assist.
Thanks in advance,
V

Hello again. For AD environments you can run the following command on each workstation:
sudo dseditgroup -o edit -n /Local/Default -u localadmin -p -a "Domain Users" -t group _lpadmin
This command assumes you are typing this interactively on the machine. Obviously change localadmin to the Mac's local admin's name. When running you will be prompted for password twice. Once to elevate permissions (sudo) and once to validate you are localadmin.
If you are using Apple Remote Desktop (or JAMF or other management suite), you can push this command out while embedding the localadmin's password.
sudo dseditgroup -o edit -n /Local/Default -u localadmin -P yourpass -a "Domain Users" -t group _lpadmin
Please note, if your password uses special characters (/-\) this may fail over ARD.
In Mavericks, AD groups are cached once they are referenced. If you are dealing with a lot mobile users (laptops) you might want to replace Domain Users with everyone
R-
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

HP LaserJet Professional P1102w won't print Web Services Information Sheet

Hi there.
I've spent the last frustrating three hours trying to get the Web Services Information sheet to print on this printer. I need this sheet in order to register for ePrint.
I connect fine wirelessly on my computer to the printer. I have updated the firmware. Twice, to be sure.
I have gone to HP Web Services and clicked Enable
The message I then get is:
"A Web Services information sheet will be printed. Review the sheet for important information."
However, nothing prints.
I have tried this process with the computer connected wirelessly through my network. I have tried it with the computer connected to the printer via USB. I have printed other things on the computer this way.
I have tried rebooting the network and the printer and then reconnecting
I have tried these steps:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/eprint-printer-code-...
(I changed the preferred DNS from 10.0.1.11 and the alternate DNS from 8.8.4.4. to the values suggested)
Afterwards, there was no change. My printer continued to print in every way possible. However, it will not print the Web Services Information Sheet.
I'm very keen on getting my hands on this email so that I can register for ePrint. Can anybody help me? I would be hugely grateful.

Sorry to hear you were unable to setup the wireless again on the p1102w.
I have provided some steps in resetting up the p1102w on wireless network if you decide
to do it again in the future.
Reset the printer back to factory settings.
(turn printer off then hold down the x and the wireless button while turning on the printer until the lights start blinking then release the buttons.
Disconnect the usb cable from the printer.
Disconnect the routers power cable for 10 seconds and then reconnect it again.
Uninstall the p1102w from the computer.
(open cd and select uninstall or go to uninstall a program from the control panel.)
Run the cd again or download depending what operating system you are running.
Connect the usb cable when prompted to setup the wireless again.
Enter passwords for the network when prompted.
Disconnect the usb cable when prompted.
Should be able to print out the test page now.
Then you should be able to get the web services information sheet to print but will need to print out a self test on the printer to get the new ip address for the printer.
If further issues you can contact HP technical support at 1-800-474-6836.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server.

Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server. Please help.

Installing an HP network printer

HP LaserJet P1102w will only print wirelessly if I turn the printer off and on again

I have 2 Laserjet P1102w that work fine printing through USB. However, I was hoping this printer could become the standard wireless printer for individual users in the office. I have setup 2 different printers wirelessly with their own static, reserved IP addresses and they are connected to our wireless access point (WPA). We have all laptops that are connected to the network via the same access point as well as through hard wired ethernet. In all cases, they are on the same subnet.
Once I connect any laptop to one of these printers wirelessly through either the "smart install" client or the latest regular installation exe off of HP's site, it will print fine initially. However, whenever I undock the laptop or even just wait a few hours, the connection will be lost and I cannot print. The queue just says "Error - Printing" when I print sometihng. No errors in the logs. The connection will come back if I turn off the printer and turn it back on. This is very annoying and will probably not be acceptable to the users.
So I wanted to do more testing and connected both printers to my laptop wirelessly and made sure they could print successfully. I opened 2 command windows and ran a ping -t on each IP address to see at what point the connection dies. The ping will reply until I undock and go from hard wired / wireless to just wireless.. then it will say "Destination unreachable" and I can't even access the web interface. Even if I redock to hard wired / wireless, I still can't print unless I restart the printer.
This happens on 2 different laptops with 2 different p1102w printers. Any clue as to what's going on here and how I can fix it?
Edit:
If I have both wireless and nic enabled, once I undock the laptop, the ping -t changes from replying to the ip of the printer, to replying to the address of the wireless adapter with "Destination host unreachable".
For example:
IP of printer: 192.168.2.95
IP of wireless adapter on laptop: 192.168.2.25
ping 192.168.5.95
Reply from 192.168.2.95
Reply from 192.168.2.95
*undock"
Reply from 192.168.2.25 Destination Host Unreachable
Reply from 192.168.2.25 Destination Host Unreachable
This does not happen if I disabled the nic and run only off the wireless card. So the workarounds are to either turn the printer off and back on if I undock every time, or disabled the nic.
At this point, I just want to understand why it is like this?

Mowaffaq, you may want to determine whether you are making those changes in the master printing preferences (versus the adjusting the session printing preferences from within your application).
Click "Start", click "Printers and Faxes" (or "Devices and Printers"), right-click your printer, and select "Printing Preferences". On the "Paper/Quality" tab, you should be able to specify A4 as your default paper for all future print jobs.
Hope that helps.

Help setting up a Laserjet P1102w for wireless printing on a Mac

I'm trying to setup a Laserjet P1102w on my Mac for wireless printing, but it's not working. It will print fine using USB, but all the documentation for wireless setup is for Windows, not Mac. if I connect the printer via USB to my Mac, how will it get an IP address from my wireless network? Any help appreciated.

Hi Staxofjoy,
Based on the information you provided, and comparing to another post regarding this issue (link below) - It sounds like you are running 10.7 (Lion).
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Laserjet-P1102w-driver-for-Macbook-OS-X-Li...
Please go to the linked thread above, and look for the post by mikel1004 - he outlined the steps for connecting Adhoc to the printer very clearly.
Summary of what you will need to to:
1. Reset Printer to Defaults
2. Connect to printer via Adhoc from your Mac (This will disconnect you from your home wireless network)
3. Access HTML Config, and configure the printer's wireless settings manually from there.
4. Reconnect the Mac to the Home Network
5. Add the printer to the print queue.
Hope this helps
I am an HP Employee
Click the KUDOS Star to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"

Hp laser jet m4345 mfp its printing blank page

I got a hp laser jet 4345 mfp its printing blank pages

Hi ballard,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer name is showing the Universal Printing PLC6 driver and not the Laserjet M1536.
I will be happy to help you.
During the install it pulled the Universal driver instead of the Laserjet driver.
Did you download and install the drivers?
Here is the URL for the drivers if you haven't already installed them.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers. Select the operating system and click next.
Click on Driver - Product Installation Software and download the drivers.
Delete the PCL driver and install the download.
We can see if we can update the driver through the device manager if the full software was already installed from the download to get the right driver installed.
How do I get into Windows Device Manager?
Click on View and select show hidden devices.
Look for the printer entry and right click and select update the driver.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected?
Please let me know the results if you are still having issues.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LJ P1102 - can't resume printing after paper adding

Hello, looks like I need help. I have a laser printer HP LJ P1102, it connected to my PC by USB. Printing is OK but some days ago I shared this printer to local network. User from another computer is trying to print to this shared printer - all is OK. But when the paper tray is empty - user can't resume printing job even if paper already added! In this case we need to power off printer and printing all the documents again. Only my PC can resume printing job in case of paper adding. How can I fix it? Thank you.

Hello, looks like I need help. I have a laser printer HP LJ P1102, it connected to my PC by USB. Printing is OK but some days ago I shared this printer to local network. User from another computer is trying to print to this shared printer - all is OK. But when the paper tray is empty - user can't resume printing job even if paper already added! In this case we need to power off printer and printing all the documents again. Only my PC can resume printing job in case of paper adding. How can I fix it? Thank you.

HP office jet 6600 wi fi printing

hi have a 6600 office jet and it wont recognise ip address to finish set up. if i want to print i have to take my router name off settings and put the officjet in. The printer says its connected and all correct name and its in my priners file but cant print wirelesly. Have checked with bt and my rounter is working ive gone through all troubleshooting but cant get my head round this. hope someone can help

Hi helenhunt,
I would like to help you with this.
I have located a document I believe will be helpful. Although the title is 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print, the solutions will help resolve the symptoms you are experiencing.
Solution 1 in this document suggests using the HP Print and Scan Doctor. This is a great place to start because
the Print and Scan Doctor diagnoses and helps resolve common printing, scanning, and connectivity problems, including:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
Please let me know if this resolves the issue, or if you require additional assistance, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My printer hp lazer jet p1102w doesnt resume print through airprint when paper not available

Similar Messages

Maybe you are looking for