Need 50-pin connector pin assignment list for valuemotion NuDrive 4SX-411

Hi,
I need a copy of the 50-pin connector pin assignment list for the valuemotion NuDrive 4SX-411.   I have the 321942B-01 User Guide document, but it does not contain the pin assignement list.   I can't find the information on NI's website.
David Geminden

You can find the pin assignment in the user manual of the PCI-7314/7324 ValueMotion controller. On page 38 in this document there is the 50 pin assignement of these boards, that is compatible to your NuDrive. Please note that this is the pin assignment from the controller's point of view.
I hope this helps,
Jochen Klier
National Instruments

Similar Messages

  • List of BO executable that need to be put in exception list for the block s

    Hi,
    I am trying to configure the BO server to send automated emails from the server on failure of any report or program.
    I know the BO side configuration details and done it successfully using SMTP  email facility with BO.
    But my McAfee administrator is facing problem with configuring McAfee to allow email to be send from BO server.
    She need the list of BO executable that need to be put in exception list for the block sending email.
    I also tested my BO configuration by stopping McAfee antivirus services and its working fine.
    Thanks
    Ninad

    The easiest way to do this is going to be to go to the Central Configuration Manager (CCM).  For each "server" listed, go to the properties and look at the Command - this will show you the name of the executable for that server.  Each of these needs to be in the exception list.
    -Dell

  • Generation of assigner list for Admin Role

    Hello!
    How I can dynamicaly generate the list of assigners ( the users, who could assign the role to other users) ?
    I can do it manualy, one by one, but i want create a rule where the list calculates automaticaly.
    And it is impossible to insert Rule into AdminRole object. Could you help me to solve the problem?

    Hi,
    Use FBL3N to go for open line items and give the Baseline date. u can find the all the open item which u can prepare for the payment.
    Regards
    Divya

  • How to create a dynamic entry list for an input field in VC(ce 7.1)

    Hello all,
    I have an Input field, i need to create a Dynamic Entry List for it in VC(ce 7.1).
    How can this be done.
    Thanks in Advance.
    Thanks and Regards,
    Santhosh Guptha N

    Hi Santhosh,
    You can define Dynamic entry list for Drop down list and combo box but not for input field.
    [Refer this|http://help.sap.com/saphelp_nwce10/helpdata/en/2a/28249060dd4dbc872f6266f4557364/frameset.htm] for defining entry list.
    Let me know if it helped.
    Regards,
    Dharmi

  • Dependency List for ESS SP11 using Maintanance optimizer ?

    I need to somehow get a dependency list for ESS sp11 patch. I was told that this can be done on the Solman 4 system using Maintanance optimizer. I can see how to impliment the service pack but not how to generate a list of dependencies that I can present to the customer. Any help would be greatly appreciated.
    Edited by: VASQUEZ J. David on Feb 12, 2008 8:28 PM

    Hi VASQUEZ,
    You can see the dependencies ESS in the service market place only,you can see the import conditions for that particular package.Solman's maintanence optimizer is used to approve the download of that stack.Here you can not see the dependencies using solman.I think if you want to install patches for java they are cumilative,you can directly go from your current patch level to the recent one present in the market place.
    Reward points if helpfull.
    Regards,
    Vamshi.

  • Display list for Vendor search in SC tcode in SRM 7

    Hi all,
    We are on SRM 7.1 ECS.
    THe vendor search help display list in SRM 7 in the SHOP in 1 STEP tcode displays number of columns like VENDOR ID,name,street,city etc...IN SRM 5,there were only limited number of clumns(around 6) displayed like vendor ID,name,Porg,DUNS etc.
    I know in SRM 7,we can right click and always chnage the USER settings for each individual session/user.BUt if I need to craete a default display list for the vendor serach in the SC transaction,is that possible?
    Also if I modify the web dynpro application to limit the no of culmns,then changes will be displayed in all the trasnction sin which the vendor search help might be used.
    Users in our org have problemw when scrollingtop to bottom in the result list which is displayed for the vednor seaqrch due to the new web dynpro UI in SRM 7 and hence the query.
    Any suggestions will be highly appreciated.
    Thanks in advance for your time.

    Hi Scot
    the below is for goa . try for BP too.. Why you require TREX search . std search dont enough. since
    TREX helps only if you want to enable  full text search for long texts and attachments in contracts.You need to instal  the trex server and configure the settings:-
    1.create RFC destination of type TCP/IP server using TCODE SM59
    2.MAINTAIN ENTRY IN back end systems settings
    3. Activate full text search y executing the program BBP_TREX_INDEX_ADMIN .
    bUSINESS oBJECT : - bus2000113
    subtype usiness object :- cc for GOA or blank for operational contracts
    Action for SRM TREX index :- select the appropriate value from search help . for example , you would specify A for the initial index generation.
    bundle size for indexing : enter "10." bundle size affects performance. The size indicates the number of docuemnts that will be updated in one pass.if there are a large number of documents, then the size may be reduced to improve performance

  • Need the SCSI-II 100-pin connector for the PXI-6624

    Hi. I need to build a custom cable for the NI PXI-6624 and I would like to know where can I get the 100-pin connectors. Thank you.
    Daniel
    Chile

    You should be able to find the connectors here:
    Subminiature and Microminiature D Connectors .050 Series Cable Connectors (SCSI)AMP (749111-8)
    The parts are made by Tyco Electronics P/N: 749111-8
    Otis
    Training and Certification
    Product Support Engineer
    National Instruments

  • MOVED: 3-pin connector for fan

    This topic has been moved to Overclockers and Modding Corner.
    3-pin connector for fan

    Generally, the 3 pin connector on VGA cards is smaller than the CPU fan connector on a motherboard. You would need a converter or you may aslo need to mod the connector on the Zalman.
    You could check to see if the actual contacts between the two are the same, in some cases I have been able to use a dental pik to remove the contact pins from the female connector of the original fan's connector and install it into the larger size connector but it's been so long since I have done it. In some cases I have been able to find the little metal contacts at an electronics store and crimp them on myself.
    Since this is not an MSI product and this is an MSI forum, I have moved this topic from the VGA forum to here.
    Good luck.

  • I have a 7th generation nano, and am interested in the Nike   Ipod sport kit.  However, it looks like the kit only works with older nanos with the 30 pin connector.  What kit or what accessory do I need to utilize the Nike   ipod sport kit fuctionality?

    I have a 7th generation nano, and am interested in the Nike + Ipod sport kit.  However, it looks like the kit has a 30 pin connector on the receiver and the 7th gen nano is a lightning connector.  Not sure if the kit will work.  What kit or what accessories do I need to utilize the Nike + ipod sport kit fuctionality in the 7th gen nano?  Do I just need a separate sensor and/or a heart rate monitor? Or is there a kit available for 7th gen nanos?

    Hey SeanW89,
    Thanks for the question. The iPod nano 7th generation has bluetooth functionality that can connect to the Nike+ sensor. You do not need to purchase the USB kit, but rather just the sensor itself:
    Nike + iPod Sensor - Apple Store (U.S.)
    http://store.apple.com/us/product/MA368LL/E/nike-ipod-sensor
    iPod nano (7th generation): Frequently used features
    http://support.apple.com/kb/HT5470
    Connect to Bluetooth accessories
    You can connect your iPod nano to compatible Bluetooth headsets and other accessories, including some hands-free systems in newer cars. You can also connect to a Nike+ sensor or a Bluetooth heart-rate monitor. iPod nano supports A2DP for audio streaming and AVRCP for controlling playback on Bluetooth devices.
    Note: FM radio will not play through a Bluetooth accessory.
    Thanks,
    Matt M.

  • TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

    I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

    I have the same problem.
    Two similar discussions:
    https://discussions.apple.com/message/23081658#23081658
    https://discussions.apple.com/message/23281391#23281391
    I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
    If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
    Please let us know what feedback you got from asking Apple support.

  • I need to replace the 30 pin connector on an ipod mobile speaker. Any suggestions where I might obtain one

    I need to replace the 30 pin connector on an ipod mobile speaker. Any suggestions where I might obtain one?

    How about contacting the manufacturer of the speaker?

  • Diagram showing the connector pin assignments for a TBX-68 terminal block

    Could someone provide me with a diagram showing the connector pin assignments for a TBX-68 terminal block? The terminal block is connected to a PCI-6204E board.
    Thank you for your time
    Andrew Lockyer

    Since pins 1 through 68 are clearly marked on the terminals, I'm guessing that what you really want is the pin out of your DAQ board. That information should be in the manual that came with the board. I could find no reference to a 6204 board on NI's site so I can't point you to an electronic version that you can download. Double check the model number of your board. Once you locate the manual and the pin out of the 68 pin connector on your board, then everything else is simple. Assuming you have a 68 pin ribbon cable connected between the board and the terminal block, then pin 1 on the board is pin 1 on the terminal block, etc.

  • 100-pin Connector Required when Building Custom Cable for PCI-6031E

    Four 100-pin connectors are required to make custom cables to connect the PCI-6031E. Where can I get this connector?

    Hi Tom,
    Thanks for your reply.  The ringing (noise if you like, but it is definetly being coupled to the output signal from the source) is occuring during both the logic low and logic high periods of the output.  I agree, this is still within the TTL noise margins, but is staying within the margins the only important thing? - e.g. what happens multiple devices are clocked using the same output pulse - the pulse shape is degraded slightly due to cabling and input capacitance etc, and now, because of the additional ringing, the logic thresholds are being crossed when they shouldn't be.  If you consider that the source signal is 5Vpp and the induced ringing is 0.4Vpp then the rejection ratio would be 20*log10(0.4/5) = -22dB, not very good.  The situation is not as bad when one of the internal timebases is used as the source but this particular application requires an external one.  So, I'm looking for ways to reduce the ringing if you're aware of any.  One possibility might be to reduce the cable length - I'm using the 2m cable so maybe you could try the 1m cable for me and see if things improve.
    Jeff

  • Pin connector for front headphone ja

    The front headphone jack cable connection on my Dell 4600 is incompatible with my new Xtreme Gamer soundcard's male pin connection. Can anyone tell me where to find the correct female pin connector, and how do I know which leads go to which pin slots?Thanks?

    more or less to adapt the here is the crude way to do it. DO AT YOUR OWN RISK. . Check to see if you have some slack from /8-/4" of an in in cable is going bye bye.2. Cut all the wires or the cable with all the colored ones in them about /2-" up the line.3. Strip exposed ends as to allow splicing on the Blue, Green, Yellow, Orange, Red, Black, and brown cables only.4. on the plug side twist together these wire colors [The should always be back to back]:?Blue and Green??Yellow and Orange5. Splice the wires together from plug piece to wires goint to front:??[Blue+Green {Step 4}] to just the Blue Wire?The Purple and Navy Blue that went into the hole next to plugged are not used trim all off plug.
    [Yellow +Orange{Step 4}] to just the Yellow wire.
    Brown to Brown?Black to Black?Red to Red6. Check your work: Wires not connected that lead to front of computer should be: Grey, Orange, Purple, and Navy.7. Use electrical tape to cover exposed splices area on each splice. Make sure tight at least 2 rotations.8. Use electrical tape to wrap all wires together and tightly.9. Plug the newly rewired plug into your SB Card.0. DONE.

  • RS482, Pin connectors and onboard...

    Ok, so I need to replace my power supply with one thats more powerfull in order to run my Nvidia 7600GT properly. 
    Does the RS482 use a 20 or 24 pin connector? Also, when i plug my 7600GT into the board, the onboard GFX will disable automatically, right? 
    Thx for the help!
    EDIT- If it helps, this is the power supply a plan to buy:
    http://www.newegg.com/Product/Product.asp?Item=N82E16817153007

    Quote from: ag3nt0r4ng3 on 17-June-06, 01:45:00
    Yes, you will need a 20-24 pin connector in order to use that PSU.
    And yes, your GFX will default to the 7600GT.
    BTW, what PSU do you have now? I frankenstiened a CompUSA 250W to my SFF, and I have a Mobile 3700 Newark, 1GIG ram, same board, 7800GT, 250G hddrive, 16x DVD burner, XFi.
    I have a 300W stock PSU that came with my case right now. I dont trust it, so i ordered this PSU instead (Different from the one listed above)
    http://www.newegg.com/Product/Product.asp?Item=N82E16817153028
    It has a 20+4 connector, so i should be good.
    Thx for the help!

Maybe you are looking for