Need to downgrade from FF5. Where is the version 4 installer?

Due to the incompatibility with necessary add-ons, I need to downgrade FF5 to 4 immediately. Only the link for the previous installer is for 3.6.18 here:
http://www.mozilla.com/en-US/firefox/all-older.html
Where can I get the version 4 installer?

Hi Mate, I've had the same problem with my Alpine stereo I think.
I've found a few posts about trying an old .iswp file I think it is.
I use it in my car alot so I don't think I'll be upgrading it again.
Good luck,
Leon.

Similar Messages

How to install my WVC210 Wireless-G PTZ Internet Camera so I can view it from any where in the world.

Hi guys I just bught a
WVC210 Wireless-G PTZ Internet Camera
I need to install it so that I can view it from any where in the world. I have no Idea how to do this.
I would like if some one can send me a video tutorial on how to do it.
I have a website that I am runing so I guess I can use that if I need something like Hosting and Domain things.
I want to know if it is posible that I can some how configure it so I can view the camera on one of my websites page.
For exaple: www.example.com/mycamera???
If not well I would love to here the options I have.
Thank you very much in advance!

Rogerio,
I have never seen a router like you have and I wouldn't dare advise you about changing the settings. It appears that it is a router/modem that was provided by your ISP. If this is the case, I recommend that you call your ISP and ask them for Port Forwarding assistance. You need to forward port 80 to the LAN IP address of your camera. The LAN IP address of your camera is the IP address that you use to log into the web interface. You should not need to change any settings on the camera. After you have had the ISP help you forward the port to the camera, go to ipchicken.com and you will see your WAN IP address. Write that address down and then go to a remote location and type it into your web browser. You should get the login page of the camera. Note that your WAN IP is subject to change. You can ask your ISP to provide you with a static IP address which will be an additional charge each month but your IP address will not change. Another option is to use a service such as dyndns to create a unique URL that you can use to access the camera remotely even if your WAN IP address changes. We can discuss that after you get access to the camera if you have further questions.

Just purchased a iwork software from jbhi where in the pack is the registration numberf where is the

Just purchaed iwork - family pack from JBHIFI where is the registration number

Myeh - I'm not really in any rush. I work from home as a private contractor. I tell you - it is so much more ... relaxed? ... than when I was working for my previous employer. My current employer wants the product finished by June. Thats when they have a big push of students coming in and want the new software ready for them. So, I've got a while - and it definitely wont take me that long to complete. I just figured that there must be something to the fuss about IDEs and how they simplify things. And, tonight, I found that that is a load of horseshit.
(Just so you know - there is a downside to working for yourself... you get weird requests from people like the following ...)
I had a guy once ask me to write an application for his son who is obsessed with the television show Alias. He said he wanted a program that did exactly what this Alias program did on the show in a particular episode. When asked if I was familiar with it, I said no. So what does this goofball do? He goes and buys the show on DVD and brings it to me. We watch it - he takes me to the point in the show and says "That! Right there! That's what he wants!!"
Astonished (and somewhat dumbfounded) I ask him, "You're aware of the fact that I am not going to be capable of writing an application that remotely logs into a secret NSA super-computer via satellite ...... right?" He then proceeded to tell me to make it look like it does. Just make up all sorts of stuff - just as long as it looks the same.
The worst part .... that wasn't the only request of the type that I've received. (Granted, the others were by kids - usually 14 or 15 that thought that I'd do it for 10 or so bucks.) Because I obviously have time to waste on such things ...

After downloadong Elements 11 from Staples, where is the serial number?

After downloadong Elements 11 from Staples, where is the serial number?

Have you tried going to http://www.adobe.com/go/getserial/ and entering your redemption code? You can find more details regarding the redemption code process at Serial number retrieval process FAQ | Point-of-sale activation products - http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html.

I would like to downgrade from Mavericks to an earlier version. How to do that

I would like to downgrade from Mavericks to an earlier version. How to do that?

Hi hommakusee,
If you had an issue with your Mavericks install, you may the following article helpful:
OS X Mavericks: Revert to a previous OS X version
http://support.apple.com/kb/PH14176
Regards,
- Brenden

Just completed the redemption process. Where's the download and installation files?

Just completed the redemption process. Where's the download and installation files?

Go to App Store > Purchases to check the OS X download progress. The installer is stored in Applications folder

Where is the stand alone installer ,why won't my computer upset from10.9.1 to 10.9.2

where is the stand alone installer ,why won't my computer upset from10.9.1 to 10.9.2

Go to About This Mac in the Apple menu.
Click on the Version number in the window that opens. It will change to Build number. What's the build number?
Also, what error message do you see, or any other helping description of what happens when you try to update.

Hi, I need to install Adobe Flash Player because the version I have installed in my Mac Os is old, but I can´t because I need to write my email and my password and I don´t remember my password, so what can I do?

Hi, I need to install Adobe Flash Player because the version I have installed in my Mac Os is old, but I can´t do it because I need to write my email and my password and I don´t remember my password, so what can I do? Thank you

The email and password will be the ones for your computer's security, not something for any Adobe product. You might need to consult Mac customer support if you are unable to determine the required information.

I urgently need to downgrade from Acrobat Pro DC to XI. Help?

I teach the creation of accessible PDF documents and have a new computer. I installed various applications onto it including some Adobe products.
The course currently teaches how to use Acrobat Pro XI. This will change with the release of DC but not immediately. I have a class tomorrow and need to have Acrobat XI installed. How can I downgrade ASAP?
Gerry

Hi Phil,
The licence of Acrobat DC will not work with Acrobat XI, even its not possible to downdrade the licence from Adobe Acrobat DC Pro to Adobe Acrobat XI Pro if its not a volume licence.
Option to downgrade the licence is only available for Enterprise customers i.e with volume licences, and for that you need to contact our tech support, go to Contact Customer Care page and then click the "Still need help? Contact us" button to initiate a call or chat.
Regards,
Aadesh

Need to downgrade from OS 10.5 to OS 10.2 on Old 17" Powerbook

I need to downgrade my original 17" Powerbook from OS 10.5 so that I can operate OS 9. I have the original 2 install disks, which are 10.2, but I can't start up from the disk. My CD/DVD drive is bashed in so I have to use an external CD/DVD drive, but I successfully upgraded using this system. Every time I try to start up using an install disk below 10.5 using the "c" key method (I have tried the Powerbook 10.2 install CD, a 10.4 install CD from a Mac mini, and the 10.4 install CD from my current Macbook Pro), I get a grey screen with the apple, a blue screen, and then it boots up like normal to show my 10.5 desktop. I need suggestions on how to downgrade this computer because I really need to run several OS 9 programs for my research. Any ideas would be greatly appreciated!
Thank you.

You cannot simply install a lower version over an newer version. To install an older version you need to first erase the hard drive. See the following:
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit Disk Utility and return to the installer. Proceed with the OS X installation.

N9 email from name, where is the option?

In the Mail app I'm trying to send email with a custom name and custom email address. I set up Other mail account (IMAP/SMTP). This worked fine in Nokia E55 for example (custom from name and address). In N9, I don't find any place to change the sender email address and also the name inserted into Accounts -> Other mail account -> My name doesn't seem to have any effect. The messages are sent just by the IMAP email address (no full name). Outgoing mail server username doesn't have effect on the visible from field either.
Where are the working sender options?

yes, this is a draw-back for sure.
i found a way around it.
first, it sounds like you are only able to send from the IMAP email that you set as the default.
in order to change the "from" email address, you will need to tap the "down arrow" under the subject, there you will see the "from" and you can tap and change it there.
there seems to be an issue with the signiture not working correctly, so it will not change from what your default email signiture says. so if you want to have the correct signiture, then you will need to go to the inbox of the email account and then tap the + for a new email from there.
as for changing what you want it to show...
i cannot make the email show "Jim Hoyle", but lets say your email is [email protected] and you want people to actually see [email protected], then you would do that during setup.
when setting up the account, type in [email protected] and use an incorrect password.
once it fails, then tap manual and change all the data you need to for the correct settings. now when you send an email, in the 'from' area on the recievers end, it will show [email protected]
hope that helps.

Need to Downgrade from Tiger to Panther

I'm selling my iMac and need to downgrade it from Tiger to Panther, which originally came with the system. How do I go about doing this? In the process I also need to erase everything on my hard drive. Can I perform the downgrading from the original Panther installation cds, or erase the hard drive using those cds and reinstalling Panther from there?

Hello Kelly.
You need to backup all data first and use the Panther install package that shipped with this Mac and reformat the hard drive zeroing all data. Be sure to select HFS+ (or extended) with Journaling enabled when reformatting the hard drive. Instructions for zeroing all data included with this link.
http://docs.info.apple.com/article.html?artnum=107437
After doing so, re-install Panther and all software included with the Panther install package that shipped with this Mac when new. When completed, do not proceed with the computer setup assistant and shut down the computer.
When the buyer starts up the computer for the first time, he/she will be greeted with the computer setup assistant and you should include the Panther install package that shipped with this Mac as part of the sale.

When I import files (copy from jpeg or copy as DNG from raw, where is the full size original stored?

I have the photos go here file, does LR5 put the untouched original there? Do I need my own file for originals and if so, how does LR5 know where to find the full size original? I have everything working but don't understand where my untouched originals go after import. Say I import off my card to My Pictures/Lightroom Catalog/ Photos go here ..... are my originals there? What if I erase my card now, do I only have partial size negatives basically? I don't understand why LR5 didnt put in an originals do here file that imports the full photo to a stock folder. I am so confused I am about ready to throw out LR5. I even bought your instructional DVD and it doesnt make where the original files location clear, it just repeats that LT5 does NOT import the original, just thumbnail and instructions, where is the program getting the photo when I double click to open it , or am I only seeing a lower resolution version of the photo and the full res is now gone because I formatted the card?

When you import photos, you can choose "Copy" or "Move" or "Copy as DNG", and then select a destination folder on your hard disk. This happens on the right hand side of the Import dialog box. So your original files go to this destination folder.
Alternatively, if your photos are already on your hard disk, you can import by choosing "Add" and the original photos remain in the existing location.
If you're not sure where the photos are, open Lightroom, go to the Library Module, and on the right hand side is the Metadata Panel. Set the dropdown to "Default", and it will show you where your photos are stored. Alternatively, you can right-click on any photo and select "Show In Finder"/"Show in Explorer" and Lightroom will take you to the exact folder where the photo is located.
So, bottom line, you are in total control of where the originals go, and if your forgot where you put them, or made a mistake, you can always find out where they are.
What if I erase my card now, do I only have partial size negatives basically?
If your import was successful, then the photos are now stored on your hard disk. So you have the full size original for Lightroom to work with.
it just repeats that LT5 does NOT import the original, just thumbnail and instructions
Lightroom does import the original, which means, in Lightroom jargon, that it records the location and metadata about the photo; in other words, Lightroom knows where the photo is, but Lightroom NEVER contains your photo, your photo is ALWAYS stored on the hard disk.
Because Lightroom now knows where your photo is located, it is important that you not manage your photos (move, edit, rename, delete) outside of Lightroom. Photo managements tasks now must be done in Lightroom. (There are advanced methods that let you manage your photos outside of Lightroom, but these would be NOT RECOMMENDED for beginners)

Need to downgrade from Mavericks

I am trying to downgrade my OS to whatever came with it. Mavericks has just caused me too many problems. I was told doing an internet recovery would install the os that came with it, however when I did that the only option was to reinstall Mavericks. Also this is a Macbook Pro mid 2009 and my serial is
73******7XJ if that helps.
<Personal Information Edited by Host>

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You can then purchase and download any further upgrade by purchasing it from the Online Apple Store:
Upgrading to Lion or Mountain Lion
You can purchase Lion/Mountain Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

HT1222 I am having issues with my iphone 4- it keeps locking up and giving me a black screen when i am trying to use it. i took it to the at&t store where they told me i needed to update it. I have the version 4.3.3 and i am unable to do anything else,h

I have an iphone 4g and i am having problems with it locking up at times. It will lock up and give me a blank screen. When I took it to my local AT&T store they advised me to update it. I am using the version 4.3.3 and I have tried to sync to Itunes, but have been unsuccessful. I have not been able to update it at all. When I plug in my phone to the computer, it will not sync at all. Any suggestions?

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Need to downgrade from FF5. Where is the version 4 installer?

Similar Messages

Maybe you are looking for