RFC at customer for EWA into our Solution Manager

Hi,
I have created a BACK RFC in a customer system to get EarlyWatch reports sent into our Solution Manager.There is no direct connection between the 2 systems, so I'm connecting via their SAPRouter and our SAPRouter.
In the customer system in SM59 I've set up :-
RFC SM_<SID>CLNT100_BACK where <SID> is our SolMan
Routestring i.e. Target Host.- /H/<customer_internal_SAPRouter_IP/S/sapdp99/H/VAR_external_SAPRouter_IP/S/sapdp99/H/VAR_internal_Solman_IP/S/sapgw00
Gateway Host - VAR_internal_Solman_IP
Gateway service - sapgw00
Question 1 - Does RFC and routestring look correct?
I've also modifed saprouttab on the customer side with the entry :-
P ... VAR_external_SAPRouter_IP 3299
And on our side with the entry :-
P * * 3300
Question 2 - Do both saprouttab entries look correct?
I've also asked for our external firewall to allow traffic from the customer IP to get to our SAPRouter server.
Also for the customer firewall to allow traffic to our external SAPRouter IP
Question 3 - Have I missed anything on these 2 firewalls?
Question 4 - After the traffic reaches our SAPRouter server, are any changes to our internal firewall required for it to get to our Solution Manager system?
Any help is much appreciated - at the moment when we test the RFC on the customer system we can see traffic from the customer reaching our SAPRouter server, but then get an error in dev_rfc0 :-
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2803
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=223
CPIC program connection ended (read error)
dev_rd shows :-
ERROR => NiBufIProcMsg: hdl 52 received rc=-93 (NIEROUT_INTERN) from peer [nibuf.cpp 2125]
Thanks,
Richard Shaw

Hi Anil,
Thanks a lot.
SAP provides the EWA report for all its clients production system without a Solution Manager system & not provide the sam for non productive system. That means to say that for quality & developement system SAP does not provide a EWA report without a SOLMAn. For this system you must required SOLMAN to generate the report.
Kind Regards,
Jitu

Similar Messages

How to assign a system to a solution for EWA in SAP Solution Manager 7.1 Solman 7.1

Hello Dear experts,
I am trying to create and generate an EWA Early Watch report, I am configuring a Solution Manager 7.1 since scratch and now I am in the Managed System configuration - Early Watch Alert Management.
I know that in order to get the report the system have to appear in the systems and it has to be assigned to a solution but there is not appearing..
Maybe there is some step that I missed and I have to configure but I don't know which one.
Below you can find screenshot of my issue.
I appreciate your help,
Thank You
Javier Tenorio

Hi Javier,
Please follow the below steps to create solution and assigned to systems.
First assigned the logical system properly.
Execute transaction "SOLMAN_WORKCENTER", click on the tab "Solution Manager Administration", and click on "Solutions" on the left of the screen. In the "Solutions" tab, click on the "New" button to create a new solution.
A window will show up. Enter a name for the solution and select a language and click on "Save Solution"
assigned the system to solution which you have created.
Hope this will solve your problem.
Regards,
Gurpal

EWA Configuration in Solution Manager 7.1 in SP08

Hi All,
Could any one please advice on the Changes that has been taken place for EWA configuration in Solution Manager 7.1.
Warm Regards,
Sudhakar G

Hi
In addition to above also check below wiki link
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
and below as well
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
I assume you have done post setup etc
Regards
Prakhar

How to create Rfc for EP system in Solution manager

Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving "   NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhiraj

Hello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                          1
- COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY                 TAGGED
- WBO_REL_REQ_STRATEGY                 MANUAL
For quality and production Java system (target systems):
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                         1
- COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE                       CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ

After installing Appl. Server, there are no EWA Data in Solution Manager

Hello,
my satelite system send the ewa to the solution manager. After installing a second appl. server for the satelite system, there are no data show in the ewa on the solution manager.
In the logfile from the sdccn on the satelite system, you could see that the data was send.
Transfer of session data completed to destination...
On the satelite system i can see, that the ewa contain some data. But in the solution manager the ewa is empty...
Any suggestions ??
Regards
Ronald
Edited by: Ronald Negendank on Mar 23, 2010 11:50 AM

Hello Amber,
sorry for late. I delete the service definiton on both side (solman and satelite system). I rescheduled the tasks and the data was send successfully.
This is a part of the LOG from send the session data
25.03.2010     16:42:09     Transfer of session data completed to destination XXXXX
25.03.2010     16:42:09      > transfer completed
25.03.2010     16:42:09      > transfer for server XXXX completed
25.03.2010     16:42:09     > transferring 000031 functions, 0000144878 bytes, RFC block size = 0000320000 for server
25.03.2010     16:42:09      > transfer for server XXXXX started
25.03.2010     16:42:09      > transfer for server XXXXX completed
25.03.2010     16:42:07     > transferring 000197 functions, 0001771754 bytes, RFC block size = 0000320000 for server
25.03.2010     16:42:07      > transfer for server XXXXX started
25.03.2010     16:42:06      > transfer data to mapped session ID 0000008719 200 destination XXXXXXXXX
25.03.2010     16:42:06     Transfer of session data started to destination XXXXXXX
But the EWA in the solution manager is still empty...
Regards
Ronald
Edited by: Ronald Negendank on Mar 26, 2010 11:51 AM

An advanced solution for sending email from Solution Manager (or CRM)

Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy

Hi all,
did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
<a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
I´ve got some problems:
I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
I´ve got some errors:
In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
- method string_to_soli does not exist. There is a method xstring_to_solix.
When I change to method xstring_to_solix
- "L_STRING" is not type-compatibly to "IP_XSTRING".
In method ZSM_ATTACH_PHIO_DOCU:
- field DOCUMENT is unknown
Regadrs
Andy

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

Generate Remote Connection for our Solution Manager 7.1

Hi,
In order to complete installation of SAP Solution Manager 7.1, we need to send a message to SAP Support through SOLMAN but we still don't have a RFC connected to the SAP backbone.
Anyone get a process easy-to-understand and to set up, we're in France and it's very urgent.
Currently we've set up correctly installation of back-end and front-end, we can logon to solution manager and it's all.
If you have ever done an installation of Solution Manager with Remote Connection, please join me.
Best regards,
William

Hello,
Did you download and follow the Installation Guide?
http://solman_srv:8000
Is NOT a Fully Qualified Domain Name (FDQN)
A Fully qualified name would have the format
Host.Company.Domain
i.e. http://service.sap.com is fully qualified, while http://service is not.
This is the first problem you are having, but I suspect you have more, as at this point in the installation SAP* should already been disabled and your Admin user accounts setup. This would have been durng the post installation steps, which are performed prior to Solman_setup.
Yes, you need to defined parameter icm/host_name_full to equate with the FQDN of solman-srv.
Second thing is that client 000 and client 001 are reference clients provided by SAP. You don't want to be changing these clients. You want to be copying these reference clients to your clients and then configuring those clients, not your reference clients, as this will cause a problem when you need to create new clients.
Did you follow the installation guide carefully? I would recommend you review, because it covers off these things, so you shouldn't be running into these errors at this point in the configuration phase, if you followed the Installation guide (especially the POST Installation steps)
Regards,
Paul

Accessing Component Information for systems connected to Solution Manager

We currently aggregate system component information for our ABAP systems through the following manual (and tedious) process:
Log into each ABAP system
Menu: System -> Status
Click Component Information button (magnifying glass icon)
Retrieve the information: Component, Release, Level, Support Package Name, Description.
Recently, we were drilling through Solution Manager Root Cause analysis -> Change reporting and noticed that this information is available for each system. In the ABAP-Software data store. This led us to consider if this information is contained within the Solution Manager BW cubes.
However when we looked at the SMD Change Analysis (thinking this would map to what we saw in the Change Analysis reporting), we didn't see this information.
So, the question is, does anyone have any thoughts were the Component information for systems is stored in Solution Manager? Ideally, we would like to tap into this source for our own custom report as opposed to retrieving it manually from each system as I described.
Thanks,
Jeff Henke

Hi Jeff,
the information about software components (and this is I think what you are looking for) is stored in the LMDB of Solution Manager. Each satellite system sends its component info into SLD (either in an external system or in Solution Manger itself). From there it is redirected to LMDB.
Try transaction LMDB in Solution Manager. There you have (depending on your SP-Stack) access to several reports to evaluate your landscape.
Best regards, Alexander

Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??

Hi All,
I am customizing my technical monitoring templates and would like to know :
1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
Need your guidance.
Regards,
Manish K

Hi Javier,
Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
Kind regards,
Roland

Report for Change documents in Solution Manager.

Dear Masters,
In Solution manager, we are monitoring the inbound support messages through the Transaction code CRM_DNO_MONITOR.
Here i can veiw the status of support message as of now, but i am not able to see the changes done throughout the process.
Is there any report where i can find the data for changes done on the support messages for the given period?
I can find the change documents where by entering into the support message in Menu bar under Extras > Change documents.
But my requirement is i required this report for the some number of support messages for the given period.
Your help will be much more appreciated.
Thanks,
Panneer

hi
is this te one are you looking for
[http://help.sap.com/saphelp_smehp1/helpdata/en/43/2f40b6853e0d23e10000000a1553f7/frameset.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/43/2f40b6853e0d23e10000000a1553f7/frameset.htm]
jansi

End User Role for Service Desk in Solution Manager

Hey,
I am launching the Service Desk functionality for my End Users. One thing that i want to know of is the role that I should assign my user in Solution Manager to access his message. E.g.
I have a user 'A' who creates a message from any system in my landscape:Test, QA, Dev or Production. Now this message reaches in Solution Manager and is assigned to a certain Support Team according to the rules I defined. Now the personnel of Support Team needs some feedback from the end user who created the message. For that the user 'A' has to log into Solution Manager, access his message and enter the details which the Support Team requested.
I want to know that what Role should i give to this user 'A' so that he is able to access ONLY the messages that he created i.e. "Reported by" field showing user 'A'; and is able to view and edit them.
If I give him the role SAP_SUPPDESK_CREATE and SAP_SUPPDESK_DISPLAY, he is just able to see the messages, all of them, but is not authorized to edit any. Please help me out in this matter as i need a solution asap.
Regards,
Bilal Nazir

Hi Nazir,
Create a role and add this t-code manually.
CRM_DNO_MONITOR - Transaction Monitor
This is will definitely solve your problem.
Feel free to revert back.
Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason

How to create Document Structure for existing project in Solution Manager

Hi gurus
We have all the project document saved using Solution manager . we have ended with Phase1.
We are starting Phase2 and they are asking me to creat different folder as Phase to in existing project and store all the Documents
Can any one please tell me how to create New folder and store the documents in Existing project
Point will given for helpfull Answer
Thanks
Bhaskar

Hi Bhaskar,
Assuming you have full authorisations, the procedure is simple.
Please go SOLAR_PROJECT_ADMIN transaction.
From the menu please select Project -> Copy
In the ensuing screen, key in your desired project name, scroll through the other checkboxes to see if you are happy with the default choices; if not, take corrective actions.
In the last set of radi buttons "Desired behaviour at later version comparison", the default choice (2nd entry there - Adjust target project to the original of the source project) is fine.
From your scenario, since you do not have a Template -> Implementation Project functionality and instead are copying from one Implementation to the other, this radio button is of little consequence.
Execute the process.
In the window that comes up, please choose Local Object, assuming that you do not want to capture the whole contents into a 'Transport'. This is more required if you are aiming to copy the project from one SolMan instance to another.
It would give an information message "Generating in batch job (Name ......)
In a few minutes, you'd receive an intimation of the Project being copied.
That's pretty much about it. Have a check on the newly created project in SOLAR01.
Please let me know if you have any doubts.
Best regards,
Srini

Grey EWA report in solution manager

I have migrated the server to another system with different SID, and then upgraded the system to solution Manager 4.0, with sp11,
Oss Note 762696 has been followed, but I still have grey EWA report.
any insight or suggestion ?
thank you,
Vedi

Hi Ruediger,
I already open SAP message, but I see their feedback not for a week now.
Btw, according to that note(917558), I also have to put ST-SER in satellite system,
which I never have to put there in the past.
Could you confirm,
here is my satellite system support package lists:
SAP_ABA     700     0011     SAPKA70011     Cross-Application Component
SAP_BASIS     700     0011     SAPKB70011     SAP Basis Component
PI_BASIS     2005_1_700     0011     SAPKIPYJ7B     PI_BASIS 2005_1_700
ST-PI     2005_1_700     0003     SAPKITLQI3     SAP Solution Tools Plug-In
SAP_BW     700     0012     SAPKW70012     SAP NetWeaver BI 7.0
LCAPPS     2005_700     0004     SAPKIBHD04     LCAPPS 2005_700 : Add-On Installation
SAP_AP     700     0008     SAPKNA7008     SAP Application Platform 7.00
EA-IPPE     400     0007     SAPKGPID07     SAP iPPE (EA-IPPE) 400
SCM_BASIS     500     0008     SAPK-50008INSCMBASIS     SCM Basis 5.0
SCM     500     0008     SAPKY50008     Supply Chain Management 5.0
QIE     200     0004     SAPK-20004INQIE     Quality Inspection Engine 2.00
BI_CONT     702     0001     SAPKIBIHP1     Business Intelligence Content
CPRXRPM     400     0007     SAPK-40007INCPRXRPM     SAP xRPM/cProjects/cFolders 4.00 (ABAP)
ST-A/PI     01I_SCM500     0000     -     Application Servicetools for SCM 500
regards,
vedi

Creation of Ibase for satellite systems in Solution Manager 4.0 SP13

Hello!
Can enybody help?
We are trying to creat Ibase for Satellite systems in solution landscape in SolMan system, using the automatic generation(TA SOLUTION_MANAGER) for specific solution.
After successfully generation we have only one iBase for one solman system only, but there are some systems in solution.
Does anyone know how to generate iBase for all systems in solution?

Hi,
There will be only one iBase for a solution.
Goto tcode IB52 and check. You will find all the systems assigned to your solution appear there.
regards,
Ram

RFC at customer for EWA into our Solution Manager

Similar Messages

Maybe you are looking for