New 8.2 install won't start on new Sol 10

I just installed SJAS 8.2 Platform on my shiny new Sol 10 install. The whole point of my shiny new Sol 10 install is to install SJAS.
Anyway, I ran install, defaulted the install directory to /opt/SUNWappserver.
I added /opt/SUNWappserver/bin to my PATH.
Fired off asadmin start-doman domain1
And I got:
Starting Domain domain1, please wait.
Log redirected to /var/appserver/domains/domain1/logs/server.log.
/var/appserver/domains is not a directory
CLI156 Could not start the domain domain1.
Thinking "Yeah, OK, logs go to /var, no problem", I created that directory.
Then I tried again and got:
Starting Domain domain1, please wait.
Log redirected to /var/appserver/domains/domain1/logs/server.log.
/var/appserver/domains/domain1 does not correspond to a valid domain directory.
CLI156 Could not start the domain domain1.
It then occured to me that in fact the system has the install directory confused.
However, I looked at config/asenv.conf, and it looks fine. It points to the stock Sol 10 JDK at /usr/j2se, it sets /top/SUNWappserver as the AS_INSTALL directory, and /opt/SUNWappserver is prominent in all of the other entries as well.
So, I'm mildly flumoxed as to why it is insisting on /var/appserver.
Any hints?

Well, your shiny new Solaris 10 came with an 8.x appserver installed as the part of OS and that appserver is installed into /usr/appserver. Asadmin command belonging to that installation is linked in /usr/sbin. You did not mention how exactly you added /opt/SUNWappserver/bin to your PATH, but if you appended instead of prepended you will end up calling bundled appserver's asadmin command (and that somehow did happen).
Since bundled appserver has not been configured to have default domain yet, you got the error message you did.
Solution: prepend /opt/SUNWappserver/bin to the path, run "which asadmin" to verify that you are calling the right one and you should be set!

Similar Messages

Creative Suite 6 install won't start OS x 10.7.4

Installing from disk. Clicking on install icon gives no result, install won't start. No error messages...nothing.

I have the same problem. What did you do to fix it. How do I get the installer to stop hanging in the background?

Fresh install won't start - says it's already running even after reboot

I've installed Firefox for the first time on this Windows 2008 machine.
The installer quit complaining that Firefox was already in use. I've rebooted twice, and attempted to delete the parent.lock file, and it still won't open.
I can't delete the parent.lock file as it's in use, even after a reboot.
Anyone got any ideas how I fix this?

edit
I missed the post above. Partly no doubt the annoying lag on forum listings updates.
Is the entry in the ''profiles.ini'' file sane and does it point at a location that has suitable read and write permissions. I am of course assuming if you rename ''profiles.ini'' in its current location that Firefox does recreate it.
* http://kb.mozillazine.org/Profiles.ini_file
Presumably after you delete or rename the profile folder Firefox does manage to recreate and populate the profile.
If this is not happening do a clean reinstall of Firefox again, deleting all the Firefox program folders and files prior to the install.
*[[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox]]_5-reinstall-firefox

EMac won't start; 'bong,' pause, 'click,' and dead

My eMac (Tiger installed) won't start up. It makes the intial 'bong' sound and after a few seconds, there is a click and nothing else happens. The screen remains black, no question mark, nothing. It acted up previously in that, when the space bar was pressed to wake from sleep, it would shut down. It always started up after that, though, until the final time it shut down and we went on vacation for a couple of weeks. When we returned, it would no longer start.
One of my biggest objectives is retrieving certain files on the eMac. I have an old blueberry iMac and an external hard drive, the original eMac disks, the Tiger disks and Tech Tool Deluxe. Any suggestions?

USB 2.0 eMacs had a known hardware fault that is, today, essential fatal due to the expiration of an Apple program to fix it at no cost. The cost of repair without the program is equal to the value of a half-dozen used eMacs assuming a tech can find the parts. So we should decide up front if your eMac is among the affected models.
First use this article to locate your serial number and model variant:
http://support.apple.com/kb/HT2395
then use the serial number to find your eMac variant in the chart in that article. The hardware fault ONLY affects those with the variant name "eMac (USB 2.0)"
If yours is a "USB 2.0" please see if the serial number falls in these ranges:
G8412xxxxxx- G8520xxxxxx
YM412xxxxxx - YM520xxxxxx
VM440xxxxxx - VM516xxxxxx
If it does, consider Roam's advice to pull the HD and not worry about breaking something. The rest of the computer may have some resellable parts but the logic board cannot be economically repaired today.

Had a new hard drive installed last month. now iphoto won't start up, popup says "you can't open the application iphoto because it may be damaged or incomplete. can this be repaired without going to the repair shop?

had a new hard drive installed last month. now iphoto won't start up, popup says "you can't open the application iphoto because it may be damaged or incomplete". can this be repaired without going to the repair shop?

What installed iPhoto there in the first place? Was it the same version of iPhoto that came with the Mac? Was iLife added at a later time from a Mac Box Set? You can selectively install iPhoto, and then apply the appropriate iLife update without taking it to the shop, after removing the application, or recover it from your backup.

I installed Final Cut Express in new I-Mac OSX Lion 10.7.2 and it won´t start

I just installed Final Cut Express 4 on a new IMac with OS X 10.7.1 and can´t get it sto launch.

It's an accomplishment that you were even able to install it on Lion (normally it won't even install on Lion).
But as you have already found out, it won't start, and even if it does it is not likely to run properly. Apple discontinued FCE and do not support it on Lion. You should get Final Cut Pro X instead.

G4 MDD won't start up after new memory and DVD drive Install

After watching an online video demonstration on how to add RAM and install a new DVD drive in a G4, I decided it was something I could do myself. It all seemed to go well, but after I put it back together and plugged it back in, the light comes on when I press on the power button, but the computer won't start up.
I'm running 10.4.? and I just installed an extra 512 MB RAM and a Samsung DVD+R in the lower drive slot. I also looked at some other posts/threads and decided to reset the PMU button. -No change after that.
I'm trying to get this computer in working order to pass onto my mom when I visit her next week.
Any suggestions?

I have had some of the same problems that you have experienced. I have a dual 1.25 g PowerMac w/ 2 g of ram, the Superdrive, and 4 separate drives. My main boot drive was a 160 GB WD Caviar. I also had a 160 Maxtor and (2) 120 GB WD caviares (the 120s were raided for video. The 160 WD started giving me some problems so I decided to replace it with a 500 GB WD Caviar Blue. I installed it in the machine and initialized it. I left the jumper on the drive in the cable select position. I tried to backup using Carbon Cloner and kept getting and error on one file. I re-initialed the drive to make sure it was wiped clean. I then started to back up the old drive file by file. I kept getting messages saying the drive was full. THat wasn't true as there wasn't anything on it. After several attempts to move files, I decided to put the machine back together without the new drive.
Now the real fun begins. I had trouble with the machine booting. I zapped the PRAM and did everything I could think of to get it to boot. It wouldn't so I figured it was something I did. I let the machine sit for a day or two to give me some time to calm down. I read some articles in this support section as well as some articles on several sites I could find. The machine would not only not boot but it would not even beep. I opened the machine up and tried to clean out some of the dust in it. hen I removed the battery and let it sit for a few hours. Then I held the PMMU button on the motherboard in for a long 5 seconds. I put the battery back and waited an hour or so. I tried to start the machine and got nothing. It doesn't beep but the monitor lights up as it thinks the machine is on. I've all but given up on the machine.
Now I know this is long but I have another problem. I took out the 160 GB WD boot drive and used one of the external devices called an Ultradock v4 to connect the drive to my G4 Powerbook. I used Carbon Copy Cloner to back my 160 WD boot Drive to an external 750 gb Maxtor drive that is partitioned into 3 drives. I backed up the 160 WD Boot drive to it. I didn't pay attention to how much space was used on one of the partitions. I then backed up the Maxtor to the 500 gb WD Caviar Blue. The original WD 160 gb drive took up about 197 gb on the Maxtor which in turn took about the same space on the new WD 500 gb Caviar blue. I am at a loss as to why more space is taken up by backing up from a 160 gb drive to a roughly 225 gb partition when it was less than 160 used originally.
Any ideas?

'09 MacBook Pro won't start up after installing new hard drive and restoring from an external hard drive.

I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
Please help =[

You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
Doubling the memory does not make your computer run twice as fast.

NB505-N500 Won't Start After Installing New RAM

I just watched a YouTube video showing how to replace RAM in a Toshiba netbook, but now my computer won't start even after I put back in the original RAM. On the parts label, it shows D3. I bought Crucial CT25664BC1067 2GB 204-PIN PC3-8500 SODIMM DDR3 Memory Module. Can someone provide some guida...
Thank you.
Solved!
Go to Solution.

You may want to contact Crucial.
There's a lot of talk of incompatibility in the one-star reviews on Amazon, which are about 14% of the reviews.
- Peter

After reboot firefox won't start. runs in task manager, but won't pop up. reset, safe mode and uninstall/re-install won't help. ok if no reboot.

win7 Pro. has been running firefox ok. but lately with 25 and now 26, the firefox won't start. I can see firefox is running in task manager. but it just won't pop up.
if I download it again and install it, it will run, but every time I reboot the system, it just won't run again.
try: reset, safe mode, uninstall & reinstall, new/clean profile, none of those work.

There may be a corrupted file on Firefox.<br>
Please attempt to perform a clean reinstall. <sup>[https://support.mozilla.org/en-US/kb/forum-response-clean-reinstall (More Details)]</sup> This is different than a regular uninstall.
If a clean reinstall does not fix the issue, please try starting your operating system in safe mode.<br>
To do so, please do the following:
#Ensure that your computer is shut down completely
#Press the power button
#Tap the <code>F8</code> key repeatedly before the Windows logo and startup screen is displayed
#Select Safe Mode With Networking for the advanced startup options list
Please report back with the results of both solutions.

Adobe Media Encoder CC won't start if flash player plugin is installed

Few days ago I installed windows 8.1 pro on a brand new PC and I was having problem starting AME, clicking on icon simply doesn't sort any effect, the software didn't open. I tried starting it as administrator, deleting \AppData\Roaming\Adobe\Adobe Media Encoder\, reinstalling any CC program and even using AdobeCreativeCloudCleanerTool didn't solve the problem.
At the same time, I was having problem with flash player and firefox; it was just crashing at start, for example at the beginning of a youtube video. Even reinstalling the plugin or firefox itself won't resolve the issue. I resolved by disabling protected mode on flash and after that, the plugin works perfectly in firefox.
Going back to the AME problem, after a few tries, I managed to resolve it by doing this:
- uninstall Premiere pro and relative AME
- uninstall Creative Cloud app
- uninstall flash player plugin
- run AdobeCreativeCloudCleanerTool and clearing ALL the stuff
- install CC app
- install PP and relative AME
- NOT INSTALLING flash player plugin for firefox
Only by doing this, AME starts without any problem. Even after a couple of reboots, it starts nicely.
After that, I tried to reinstall flash player plugin for firefox. Just after install, with firefox still closed, i disabled the protected mode to avoid any crashes. And by this point, AME won't start anymore. By just installing the flash player plugin (without even let it crash once) AME doesn't start. The only thing that worked was to uninstall everything again, use the cleaner tool, reinstall CC and leaving firefox without the flash plugin. At this point AME starts without any problem. I tried again to reinstall flash plugin and voilà, again AME simply can't start.
What should i do to fix this? It sounds so stupid that i have to choose between flash plugin or AME, why they can't live togheter on my system? Maybe i just have to wait for an update (for firefox or flash) and see if it changes anything?
Here are some specs of my system, if it helps:
winows 8.1 pro x64 updated
16gb ram
Intel i7 3820
GeForce GTX 670
latest version of flash, CC and firefox
no plugins installed for any CC software
flash on internet explorer works well

I finally find out how to fix this.
With flash plugin installed and protected mode disabled, I also disabled hardware acceleration in flash plugin options. So I re-enabled protected mode and the plugin worked fine.
After that, I uninstalled everything from adobe, used cleaner tool and than reinstalled all the stuff. Now AME works fine.
Hope this fix will help someone.

I have a used iMac, HD wiped, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements won't start saying "could not complete because of missing or invalid personalization info." previous owner's name still there preventing initialing?

I have a used iMac, HD wiped clean, OS 10.6.8 freshly installed w/Rosetta, Photoshop Elements was installed but won't start saying "could not complete because of missing or invalid personalization info." is previous owner's name somehow still there preventing initialing? How do I remove and install my own? I don't understand as HD was completely wiped with no OS when I got it.

I think Adobe allows their software to be installed on 2 computers only. However, if say you buy another computer and wish to install PSE on the new computer ( effectively a 3rd computer as far as Adobe is concerned ) PSE needs to be properly uninstalled ie not simply by uninstalling using the operating system's uninstall process. It needs to be uninstalled using the Adobe uninstall process that is contained within the software.
You should then be given a prompt as to whether you will be reinstalling on the same computer or if you wish to remove altogether. If the latter, then all traces are removed and the software can be (re) installed on the new computer.
If, unknown to yourself, the software had been installed on 2 computers and although you or the previous may have wiped the hard drive clean, as far as Adobe is concerned the software is still ' registered / assigned ' to 2 computers.
If the previous owner bought a new computer and installed their PSE on it, wiped the hard drive clean without properly uninstalling/removing PSE thentherein probably lies the prblem.
As Allan Jones said, it 's probably worth your while to purchase your own copy.
Hope this helps.

Recently installed Creative Suite 6 and am using Acrobat Pro. Suddenly it crashes and now it won't start. I installed the current update but still not. This happened before, in 2012, and was finally fixed. what do I do? Duncan

Hi all,
My recently installed (Windows 8.1) Acrobat Pro (part of CS6) suddenly stopped working - now it won't start.
This happened on Windows 7 in 2012 and was eventually fixed.
Any advice on what I should do? [I can't find where to post a question to the adobe help people]
- Duncan

Well, the computer stopped starting up at all. It could never find the operating system. I tried safe mode and virtually every other non-standard start-up option. I then did target disk mode with another MBP and got the message: "The disk you inserted was not readable by this computer." I then tried using disk utility and it couldn't retrieve retrieve the data using restore (writing to an external drive). I suspect that this means the hard drive would need to be replaced. In your expert opinions, is this necessarily true? Could this still be just a software problem, or perhaps some other piece of hardware?
Part of the reason I ask is that this laptop is now nearly five years old. It's needed a new battery for two years. If it's a virtual certainty that the hard drive is toast, I don't want to pay $150 for someone to take it out and try to recover any remaining data from it, only to reveal that the data is indeed irretrievable (since the computer itself is probably only worth $300-400 at this point). The nearest Genius Bar is also more than 2 hours away. Am I going about this the right way by using disk utility, given that the hard drive won't mount to the desktop of the other computer? If the hard drive can't be reat in target disk mode, does that confirm that it is the hard drive?
Thanks
Oh also, it does still make the startup noise, even though I can't run the AHT since I can't get it to start up in safemode. I thought this mean that it passing various hardware tests. Does this not apply to the hard drive?
Message was edited by: Euain_ *add-on*

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

ODBC server & agent won't start - J2EE install

Hi all,
I have installed the developer edition of CFMX7. I have
tomcat running on my windows2000 server, so I downloaded the
windows installer and chose the J2EE-war option. It runs just fine.
I also installed the ODBC server, because I want to connect
to MS Access databases with my developer edition. For that, I tried
this:
http://www.bpurcell.org/blog/index.cfm?mode=entry&entry=860.
First problem was that after tomcat automatically deployed the war
file, the folder 'SequeLink Setup' did not exist in the web-inf\db
folder. So I renamed the war to zip, and checked - the file
is present in the war. So I manually extracted the zip to a
new directory. I ran the cfm script with the reference to this new
directory, and the ODBC services were installed - hurray!
But now the services do not want to start. I first got the
error that the file was not found. It referenced to a slserver52
folder, which had only two directories called 'logging' and
'tracing', but no bin files whatsoever. There is however a
slserver54 folder, which contains all kind of stuff. So I started
regedit and changed all the references to 52 in 54, and rebooted
the server. Still no luck: now I get a 1067 error on the server and
an unknown error on the agent.
Any ideas??

That is just what I did, but that didn't help. The installer
creates services that point to the slserver52 folder, but that
should be slserver54. When I change the directory in the registry,
the services won't start. The ODBC Agent sais:
"Could not start the ColdFusion MX ODBC Agent service on
Local Computer. The service did not return an error. This could be
an internal Windows error or an internal service error. If the
problem persists, please contact your system administrator."
The ODBC Service returns the exact same error.

New 8.2 install won't start on new Sol 10

Similar Messages

Maybe you are looking for