New client added

Hi all,
ECC system ABC300 was already there and the TS and BS are already there. But now after patch upgrade in ECC, we have ABC400 now. I have to point the XI system to ABC400 now. The earlier TS and BS will not work definitely. Could you please tell me how to go about this now? Plz correct me in SLD...
1. Select the already existing TS for ABC system and add new client 400.
2.Create new BS and assign this new TS to this new BS...
I am little confused here as I have to create new BS. I want to have the same property of the old BS to the new BS. Will it be poss to copy the old BS and change the new BS name? then I can point to the new  client??
thanks
kanan

1. You cannot rename a Business System.But you can change it in the SLD to point to the new client. If this is production, it means a lot of work to re-do interfaces if you want to create a new business system etc and hence I would just prefer changing the SLD and then refreshing the Client in the Integration Directory.
2. You will have to re-do everything and I am not a big fan of rework of something that can be avoided as simple as refresh of SLD. And that is one reason why I recommend not to use Client number in Business Systems.
Regards
Bhavesh

Similar Messages

  • New bookmarks added don't appear anymore when Firefox is restarted

    Hello everybody,
    I have a Mac OS X Lion server which runs an OpenDirectory as master.
    About 50 clients connect to this server, also with Mac OS X Lion installed on each client.
    Each User has his Homedir on the server, and Firefox is installed on each client.
    The problem is : if a client adds a bookmark in Firefox, when Firefox is restarted, the new bookmark is not there anymore.
    Firefox can retreive its bookmarks when the client logs in with a local user on the client.
    So, I thought it was a problem with rights on Homedir, but they are the same on the local user as on the Opendirectory user.
    So I looked farther in fireFox sqlite databases, and I saw this after installing Sqlite Manager Firefox extension :
    I opened Firefox and Sqlite Manager and saw that :
    when a bookmark is added, moz_bookmarks table from places.sqlite database receives a new record ; but when Firefox is stopped, either modification are not committed, or table reverts in its preceeding state, because, when Firefox is restarted, the new bookmark is not there.
    So, I retried to add a new bookmark, and from Sqlite Manager, i forced changes committing through 'commit;' command ; and yet, when I stopped and restarted Firefox, The new bookmark was here !

    Hi cor-el,
    I already tried your two links from Mozilla support without success ;
    I also to tried to delete places.sqlite and even entire profile : in these cases, curiously, it is possible to add a new bookmark, restart Firefox and retrieve the new bookmark, but only once !
    If we try yet to add another bookmark, it is not here when Firefox is restarted.
    Here is a copy of 'ls -l' in profile during the process of adding a new bookmark. (excuse me for editing format, but I guess you already know what file to look at)
    '''After adding a new bookmark :'''
    -rw-r--r--@ 1 test2 staff 425984 3 mai 15:28 addons.sqlite
    -rw-r--r--@ 1 test2 staff 21182 3 mai 15:30 blocklist.xml
    drwx------@ 6 test2 staff 264 4 mai 09:17 bookmarkbackups
    -rw-------@ 1 test2 staff 98304 4 mai 09:32 cert8.db
    -rw-r--r--@ 1 test2 staff 98304 3 mai 15:22 chromeappsstore.sqlite
    -rw-------@ 1 test2 staff 201 2 mai 11:51 compatibility.ini
    -rw-r--r--@ 1 test2 staff 229376 30 avr 15:29 content-prefs.sqlite
    -rw-r--r--@ 1 test2 staff 524288 4 mai 09:33 cookies.sqlite
    -rw-r--r--@ 1 test2 staff 65536 30 avr 15:30 downloads.sqlite
    drwxr-xr-x@ 4 test2 staff 264 2 mai 11:36 extensions
    -rw-r--r--@ 1 test2 staff 335 2 mai 11:47 extensions.ini
    -rw-r--r--@ 1 test2 staff 425984 3 mai 15:28 extensions.sqlite
    -rw-r--r--@ 1 test2 staff 163840 4 mai 09:33 formhistory.sqlite
    -rw-------@ 1 test2 staff 32768 4 mai 09:32 key3.db
    -rw-r--r--@ 1 test2 staff 452 2 mai 11:22 localstore-safe.rdf
    -rw-r--r--@ 1 test2 staff 2391 4 mai 09:32 localstore.rdf
    -rw-r--r--@ 1 test2 staff 3225 30 avr 15:38 mimeTypes.rdf
    drwx------@ 2 test2 staff 264 30 avr 15:29 minidumps
    -rw-r--r--@ 1 test2 staff 65536 3 mai 15:37 permissions.sqlite
    -rw-r--r--@ 1 test2 staff 10485760 4 mai 09:33 places.sqlite
    -rw-r--r--@ 1 test2 staff 623256 4 mai 09:33 places.sqlite-journal
    -rw-------@ 1 test2 staff 6271 2 mai 14:09 pluginreg.dat
    -rw-------@ 1 test2 staff 4652 4 mai 09:33 prefs.js
    -rw-r--r--@ 1 test2 staff 12063 30 avr 16:33 search.json
    -rw-r--r--@ 1 test2 staff 65536 30 avr 16:33 search.sqlite
    -rw-------@ 1 test2 staff 32768 30 avr 15:29 secmod.db
    -rw-------@ 1 test2 staff 757 4 mai 09:33 sessionstore.bak
    -rw-------@ 1 test2 staff 9829 4 mai 09:33 sessionstore.js
    -rw-r--r--@ 1 test2 staff 294912 2 mai 16:36 signons.sqlite
    -rw-r--r--@ 1 test2 staff 154 4 mai 09:33 urlclassifierkey3.txt
    drwxr-xr-x@ 5 test2 staff 264 30 avr 16:41 weave
    -rw-r--r--@ 1 test2 staff 98304 3 mai 15:57 webappsstore.sqlite
    '''After stopping FireFox :'''
    -rw-r--r--@ 1 test2 staff 425984 3 mai 15:28 addons.sqlite
    -rw-r--r--@ 1 test2 staff 21182 3 mai 15:30 blocklist.xml
    drwx------@ 6 test2 staff 264 4 mai 09:17 bookmarkbackups
    -rw-------@ 1 test2 staff 98304 4 mai 09:34 cert8.db
    -rw-r--r--@ 1 test2 staff 98304 3 mai 15:22 chromeappsstore.sqlite
    -rw-------@ 1 test2 staff 201 2 mai 11:51 compatibility.ini
    -rw-r--r--@ 1 test2 staff 229376 30 avr 15:29 content-prefs.sqlite
    -rw-r--r--@ 1 test2 staff 524288 4 mai 09:33 cookies.sqlite
    -rw-r--r--@ 1 test2 staff 65536 30 avr 15:30 downloads.sqlite
    drwxr-xr-x@ 4 test2 staff 264 2 mai 11:36 extensions
    -rw-r--r--@ 1 test2 staff 335 2 mai 11:47 extensions.ini
    -rw-r--r--@ 1 test2 staff 425984 3 mai 15:28 extensions.sqlite
    -rw-r--r--@ 1 test2 staff 163840 4 mai 09:33 formhistory.sqlite
    -rw-------@ 1 test2 staff 32768 4 mai 09:34 key3.db
    -rw-r--r--@ 1 test2 staff 452 2 mai 11:22 localstore-safe.rdf
    -rw-r--r--@ 1 test2 staff 2217 4 mai 09:34 localstore.rdf
    -rw-r--r--@ 1 test2 staff 3225 30 avr 15:38 mimeTypes.rdf
    drwx------@ 2 test2 staff 264 30 avr 15:29 minidumps
    -rw-r--r--@ 1 test2 staff 65536 3 mai 15:37 permissions.sqlite
    -rw-r--r--@ 1 test2 staff 10485760 4 mai 09:33 places.sqlite
    -rw-------@ 1 test2 staff 6271 2 mai 14:09 pluginreg.dat
    -rw-------@ 1 test2 staff 4652 4 mai 09:34 prefs.js
    -rw-r--r--@ 1 test2 staff 12063 30 avr 16:33 search.json
    -rw-r--r--@ 1 test2 staff 65536 30 avr 16:33 search.sqlite
    -rw-------@ 1 test2 staff 32768 30 avr 15:29 secmod.db
    -rw-------@ 1 test2 staff 757 4 mai 09:33 sessionstore.bak
    -rw-------@ 1 test2 staff 2222 4 mai 09:34 sessionstore.js
    -rw-r--r--@ 1 test2 staff 294912 2 mai 16:36 signons.sqlite
    -rw-r--r--@ 1 test2 staff 154 4 mai 09:33 urlclassifierkey3.txt
    drwxr-xr-x@ 5 test2 staff 264 30 avr 16:41 weave
    -rw-r--r--@ 1 test2 staff 98304 3 mai 15:57 webappsstore.sqlite
    '''After starting Firefox again (new bookmark added above is not here anymore) :'''
    -rw-r--r--@ 1 test2 staff 425984 3 mai 15:28 addons.sqlite
    -rw-r--r--@ 1 test2 staff 21182 3 mai 15:30 blocklist.xml
    drwx------@ 6 test2 staff 264 4 mai 09:17 bookmarkbackups
    -rw-------@ 1 test2 staff 98304 4 mai 09:34 cert8.db
    -rw-r--r--@ 1 test2 staff 98304 3 mai 15:22 chromeappsstore.sqlite
    -rw-------@ 1 test2 staff 201 2 mai 11:51 compatibility.ini
    -rw-r--r--@ 1 test2 staff 229376 30 avr 15:29 content-prefs.sqlite
    -rw-r--r--@ 1 test2 staff 524288 4 mai 09:33 cookies.sqlite
    -rw-r--r--@ 1 test2 staff 65536 30 avr 15:30 downloads.sqlite
    drwxr-xr-x@ 4 test2 staff 264 2 mai 11:36 extensions
    -rw-r--r--@ 1 test2 staff 335 2 mai 11:47 extensions.ini
    -rw-r--r--@ 1 test2 staff 425984 3 mai 15:28 extensions.sqlite
    -rw-r--r--@ 1 test2 staff 163840 4 mai 09:33 formhistory.sqlite
    -rw-------@ 1 test2 staff 32768 4 mai 09:34 key3.db
    -rw-r--r--@ 1 test2 staff 452 2 mai 11:22 localstore-safe.rdf
    -rw-r--r--@ 1 test2 staff 2217 4 mai 09:34 localstore.rdf
    -rw-r--r--@ 1 test2 staff 3225 30 avr 15:38 mimeTypes.rdf
    drwx------@ 2 test2 staff 264 30 avr 15:29 minidumps
    -rw-r--r--@ 1 test2 staff 65536 3 mai 15:37 permissions.sqlite
    -rw-r--r--@ 1 test2 staff 10485760 4 mai 09:33 places.sqlite
    -rw-------@ 1 test2 staff 6271 2 mai 14:09 pluginreg.dat
    -rw-------@ 1 test2 staff 4652 4 mai 09:34 prefs.js
    -rw-r--r--@ 1 test2 staff 12063 30 avr 16:33 search.json
    -rw-r--r--@ 1 test2 staff 65536 30 avr 16:33 search.sqlite
    -rw-------@ 1 test2 staff 32768 30 avr 15:29 secmod.db
    -rw-------@ 1 test2 staff 2222 4 mai 09:34 sessionstore.bak
    -rw-------@ 1 test2 staff 2999 4 mai 09:34 sessionstore.js
    -rw-r--r--@ 1 test2 staff 294912 2 mai 16:36 signons.sqlite
    -rw-r--r--@ 1 test2 staff 154 4 mai 09:34 urlclassifierkey3.txt
    drwxr-xr-x@ 5 test2 staff 264 30 avr 16:41 weave
    -rw-r--r--@ 1 test2 staff 98304 3 mai 15:57 webappsstore.sqlite

  • Problem:Can not logon the new client after SCC4

    Hi There,
    I am doing client copy. in SCC4 i've added a new client 100, and then i try to logon to client 100 using SAP*/PASS and execute SCCL, but system always reports errors:"name or password is incorrect (repeat logon)".
    can anyone tell me what should the possible problem.
    Any responses will be awarded,
    Regards,
    Samson

    HI Samson
    try this
    Set the profile parameter login/no_automatic_user_sapstar to 0.
    Restart the application server.
    Log on to the new client with kernel user SAP* and password PASS.
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/unable-to-login-with-sap-user-1423523?cv=expanded
    hope this will help you
    cheers
    dEE

  • New Client Creation in IDES ECC6

    Hi,
    I have created a new client (900)  using SCC4 and I have added the parameter login/no_automatic_user_sapstar with value 0 before creating a new client.
    Then I've checked the table T000 (client 900 is availabe) and usr02 (client 900 is not available).
    I have restarted the system, No entries in usr02.
    I want to know whether it is possible to create a new client in IDES ?
    With Thanks & Regards
    Bhushan

    Hi,
    Go to T-code SCC4, then go to change mode and press new entry. Now enter a (unused) client number along with a short description and other details.
    After that please save the screen.
    Check your parameter login/no_automatic_user_sapstar (value should be set to 0).
    For details please refer SAP Note 68048 - Deactivating the automatic SAP* user.
    After this you need to restart your SAP instance so that the change of Parameter comes into effect.
    Now login to the system on Newly created client with SAP* user and PASS as the password.
    Perform a local client copy using SCCL t-code.
    For details please refer:
    http://help.sap.com/saphelp_erp2004/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
    I hope that this helps you!
    Please update the thread status !
    Regards,
    Prem

  • I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk.  It deleted all new data added since Dec (notes,contacts,texts,pics, info in apps) and reverted back to all my old data.  How can I retrieve all the lost data??

    I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk.  It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new).  How can I retrieve all the lost data?? Please help!!

    SkyDaughter29 wrote:
    My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes.  I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need.  It appears Apple does not sync the texts between the iphone and my MacBook Pro.
    Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
    http://www.ecamm.com/mac/phoneview/
    http://www.wideanglesoftware.com/touchcopy/index.php
    Best of luck.

  • Error while creating new client

    Hi,
      recently i installed sap 4.7 in my system .
    to create new client i copy the standard one and i assigned password .
    While i am trying to login in to new client i am getting error "password is not right even though it is passsword given while creating new one.
    can any explian me how to resolve this
    regards
    babu

    Hi. welcome.
    dont worry. cool.
    some times due to eror uploads in data base theese type of error happens. put a mail to basis people of your company. they will solve ur issue/
    thanks
    karthik

  • HT5022 I'm trying to add a "new client" to my wireless network using Airport Utility, but I can't find that option in the new version.  I've downloaded all available updates of the OS and the utility..  Help!

    I'm trying to add my HP wireless printer as a "new client" to my wireless network using Airport Utility, but I can't find that option in the new version.  I've downloaded all available updates of the OS and the utility..  Help!

    Why would you need to ADD a new Client. Unless the APE sytem is completely different then any other Wireless router the printer should get an IP address from the router. That is IF the printer is setup to get an IP from the LAN DHCP server.
    Now you may want to make that IP it does get a Staticly assign IP address so it never changes, which will screw up printing if it does change. But i don't know if you can do that with APE routers.

  • SAP* and DDIC passwords for new clients in Sol Man 4.0

    Hello all,
    I just recently finished a Solution Manager 4.0 on Windows 2003 server box. Then, I performed some of the post installation steps until I had to create a new client. So, I went to scc4 and created a new client. When trying to get access to this new client through SAP*, the default password did not work and the entries were not created in the table usr02. Also, I tried to insert the missing entries into the usr02 table, but had no success after all.
    I hope some of you can help on this, because I am stucked on it.
    Regards,
    Luis Alberto Zeró

    Hi guys ..
    i thing you can check in Document Installation guide Solution manager  on Page <b>108</b>
    If you install a new ABAP or ABAP+Java system, in most cases you do not need to perform the client copy for
    the ABAP stack. SAPinst creates three ABAP clients during the installation, client 000, client 001, and client 066.
    You can use client 001 for production.
    The following procedure describes how to perform a client copy manually. We recommend that you
    use client 001 as source client.
    <b>Caution</b>
    If you want to use a client other than the default of 001 as your production client, you have to reconnect
    the Java part to the production client as described in <b>SAP Note 937323</b>.
    <b>Procedure</b>
    1. Maintain the new client with transaction SCC4.
    2. Activate kernel user SAP*:
       a) Set the profile parameter  
          Login/no_automatic_user_sapstar to 0.
       b) Restart the application server.
    3. Log on to the new client with kernel user SAP* and password PASS.
    4. Copy the client with transaction SCCL and profile SAP_CUST.
    5. Check the log files with transaction SCC3.
    6. Deactivate kernel user SAP*:
       a) Reset login/no_automatic_user_sapstar to 1.
    <b>Caution</b>
       You create SAP system user SAP* on the new client   
       before resetting
    <b>login/no_automatic_user_sapstar.</b>
       b) Restart the application server.
    rgds
    echo

  • Logical system for new client

    Hello experts,
    I want to copy all users and assigned roles from Quality to the production system.
    But as a safety measure I want to copy the existing users and role assignment from production system too one of the test system.
    For this I created a new client in test system. My question is:
    1) Do I've to create a logical system for this new client?
    2) Is there any other step that I need to take beside creating RFC connection?
    Thanks in advance

    Hi,
    >
    > 1) Do I've to create a logical system for this new client?
    Yes.
    > 2) Is there any other step that I need to take beside creating RFC connection?
    >
    I think this is sufficient. Check this [link|http://help.sap.com/saphelp_sm40/helpdata/EN/4e/2d5dfaedbf11d3b7f60000e8160175/content.htm]
    Thanks
    Sunny

  • Ho to change the old Logical System in the new Client?

    Hi All,
    after a Client copy, I've to change the old Logical System in all the relevant SAP tables in the new client.
    In the Co tables too, such as CSKS.
    Could anyone tell me hoq to do it?
    Thanks
    G.Rossi

    Hi,
    So the only solution would be to rename the SID of one portal.-> Yes,Rename the SID of on portal
    Can this be done ? -> Yes,It can be done
    How is it done ? -> Use Export/Import method.Export the database of one SID. Import the same with different SID.
    Thanks and Regards,

  • New MovieClips added to existing SWC library not available in Flash Builder

    To be as brief as possible with this...
    I have 2 swc libraries in my Flash Builder Project. One is in a "Common" project and the other one is in a MobilePlayer project. Obviously the "common" project contains UI assets that apply across the board, while the MobilePlayer version contains assets specific to that version of the application.
    Both swc files are in the respective libraries for each project we are referencing. Up until yesterday I could add new MovieClips to the "common.swc" and they would be available across the board instantly.
    Sometime yesterday I could not get new MCs added to my "common.swc" to show up in the intellisense, or become avaialble whatsoever.
    For troubleshooting I am creating a Square, turning it into a MC symbol, exported for AS with a classname of "Fubar"
    whenever I try and create a new instance of :Fubar() to anything anywhere in my applicatioin I get the Call to possibly undefined method Fubar error message. It does not show up in intellisense menus and it is NON EXISTENT.
    HOWEVER — Named movieclips within my .swc library I have already been using such as "CompanyLogo()" etc etc are STILL fully available and can be referenced from anywhere in my application. I can add a new CompanyLogo()  anywhere I want with no problem.
    As ANOTHER test, I REMOVED the movieclips CompanyLogo (and others) from my Library and re-saved the SWC.
    All of a sudden Flash Buider generates a compiler error (undefined method) for each missing referenced MC in the swc file (obviously, because they are no longer there).
    However, those named MCs still show up in intellisense menus etc etc.
    Basically what I can determine is that Flash Builder is not updating and picking up any changes to this SWC library whenever anything is added or removed from it. At some point it became "locked" in memory (for lack of a better term) and it refuses to recognize that the file has been changed.
    When I extract the catalog.xml from the SWC and read through it, I can find nodes for every single NEW mc I've created yet I cannot get them to show up in Flash Builder. I refresh, close and restart Flash Builder and have done everything I can possibly think of to get my updates to register and they refuse.
    On the other hand my "mobile.swc" updates just fine as I make changes to it. If I add a new MC to it, it is instantly available. If I take away a MC it FB instantly recognizes that it is gone.
    Am I doing something wrong here or am I correct in my assumption that for some reason FB refuses to update the contents of my "common.swc" library into memory?
    Any insight would be appreciated as I cannot find a single relevant answer in 3 hours of Google searching.

    OK,
    Now I see what is really going on. I am trying to reference MCs from my "common.swc" lib which is in a different project, and the reason they are showing up and available is because I used them in MXML files within the "common" project that are called upon and loaded before the mobile specific login screen MXML is loaded.
    I just did a quick test to see if the new button I created would be available within the "common" project and it is there, and shows up with intellisense etc etc as expected.
    When I add an instance of my new button to a MXML file being loaded before the mobile specific stuff I can then drop it into my mobile specific screens and it shows up.
    I either need to figure out how to reference MCs within a swc inside of a different project directly, or just declare them when the application first loads.

  • How to create new client in XI

    Hi all,
      Can any one guide me how to create new client in XI.

    Hi
    To set up a new client, follow these steps
    1) Create a client going in to the path
    <b>Tools->Administration ->Administration -> Client administration -> Client maintenance</b>
    or can also use TCODE <b>scc4</b>
    2)Login into the client with
    User: <b>DDIC</b> or <b>SAP*</b>
    Password
    For default password go thru this link
    http://help.sap.com/saphelp_nw04/helpdata/en/52/67179f439b11d1896f0000e8322d00/content.htm
    Regards
    Arpit Seth

  • OC4J does not allow new client connections

    I have a java application which connects to OC4J which manages Session Beans. We have recently upgraded to OC4J 10g (9.0.4.0.0) and the following error occurs while stress testing the system:
    1)After 5 users have logged on, any new client application which tries to get a server connection hangs and no more users can connect until one of the client applications that is running is closed down. Is there a configuration setting we are missing to be able to up this number? I have 80 users.
    2)Then the application server throws the following exception. Does anyone have any insights, suggestions, recommendations?
    04/08/16 15:08:24 RMICallHandler IO error: java.net.SocketException: Broken pipe
    04/08/16 15:08:24 java.net.SocketException: Broken pipe
    04/08/16 15:08:24 at java.net.SocketOutputStream.socketWrite0(Native Method)
    04/08/16 15:08:24 at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
    04/08/16 15:08:24 at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
    04/08/16 15:08:24 at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:66)
    04/08/16 15:08:24 at java.io.BufferedOutputStream.write(BufferedOutputStream.java:110)
    04/08/16 15:08:24 at java.io.ObjectOutputStream$BlockDataOutputStream.drain(ObjectOutputStream.java
    :1639)
    04/08/16 15:08:24 at java.io.ObjectOutputStream$BlockDataOutputStream.setBlockDataMode(ObjectOutput
    Stream.java:1548)
    04/08/16 15:08:24 at java.io.ObjectOutputStream.reset(ObjectOutputStream.java:426)
    04/08/16 15:08:24 at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:187)
    04/08/16 15:08:24 at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
    04/08/16 15:08:24 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableReso
    urcePooledExecutor.java:192)
    04/08/16 15:08:24 at java.lang.Thread.run(Thread.java:534)
    04/08/16 15:08:24 RMICallHandler IO error: java.net.SocketException: Broken pipe
    04/08/16 15:08:24 java.net.SocketException: Broken pipe
    04/08/16 15:08:24 at java.net.SocketOutputStream.socketWrite0(Native Method)
    04/08/16 15:08:24 at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
    04/08/16 15:08:24 at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
    04/08/16 15:08:24 at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:66)
    04/08/16 15:08:24 at java.io.BufferedOutputStream.write(BufferedOutputStream.java:110)
    04/08/16 15:08:24 at java.io.ObjectOutputStream$BlockDataOutputStream.drain(ObjectOutputStream.java
    :1639)
    04/08/16 15:08:24 at java.io.ObjectOutputStream$BlockDataOutputStream.setBlockDataMode(ObjectOutput
    Stream.java:1548)
    04/08/16 15:08:24 at java.io.ObjectOutputStream.reset(ObjectOutputStream.java:426)
    04/08/16 15:08:24 at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:187)
    04/08/16 15:08:24 at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:48)
    04/08/16 15:08:24 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableReso
    urcePooledExecutor.java:192)
    04/08/16 15:08:24 at java.lang.Thread.run(Thread.java:534)

    Bernadine,
    Did you ever get this resolved?
    It may help us tremendously if you would share your solution with us.
    More details of our problem in the thread:
    SocketException: Broken pipe
    Thanks,
    Avi.

  • ABAP proxy client call PI with new client 120 in old business system

    Hi all
    We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
    CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
    My question is If we go to the SLD and
    |-> Click on Business System
    |-> Add new client 120
    Will it work or we need to do some extra configuration for communication channel.
    Also please let me know how to configure Integration Directory for sender agreement, Receiver Agreement and the communication channel.
    Thanks in Advance.

    Hi Naina ,
    We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
    CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
    My question is If we go to the SLD and
    |-> Click on Business System
    |-> Add new client 120
    > hope the technical entry of CRM is already in SLD . So you just need to make a business system entry . point the business sytem to the technical system entry with the right client here 120 .
    Will it work or we need to do some extra configuration for communication channel.
    > since sender is client proxy you don't need to do anything in case of receiver proxy you will be needing reciver communication channel of XI adapter type .
    for proxy based communication your application system(other than PI/XI) should be able to make a proxy call to XI or receive a call from XI .for this purpose you need to make some settings at R/3( or CRM level)
    For this check blog  : /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Abap proxies ( Client and Server proxies)
    Other steps i.e Interface determination/receiver determination are as usual .
    Regards ,

  • Creating new client (via SCC4) doesn't create defualt users (SAP*,DDIC,...)

    I've created a new client (100) via <b>SCC4</b>. After this, I've tried to login at this client with <b>SAP*</b> user and password <b>PASS</b> (i've also tested with the password that i've changed at installation). The message that the system displays is "<u><b>Name or password is incorrect</b></u>". I've been querying the SAP table <b>USR01</b> and the user is not created for this client (only for clients <b>000</b>, <b>001</b> and <b>066</b>). What can I do to login at the system with client <b>100</b>?

    Hi Raphael,
    Thanks for choosing the SRM forum for this question.  But Netweaver or Web Application Platform would be more appropriate for this question.  You can also look for SAP Notes in the BC-CTS-CCO area.  See if Note 41839 helps.
    Kind Regards, Suresh.

Maybe you are looking for