No balance in pla

hello,
The scenario is when i try to post excise doc. in j1ih other adjust. tab after entering the relevent value when i click post tab the system gives messege that no balance in pla i was posting for PLA.
tell me how we can maintained the balance in {LA.
urgent.

Hello
Step -I
First you pass the payament entry by debite to PLA on Hold or respective account in your case (Normal Bank payment entry)
Transaction type F-02 with payment type BP debit to pla on hold account and credit to bank account with respective posting key.
STEP - II
Then use transaction type J1IH in that select TR6 Challan
it will ask you for document number. provide the document number generated during the STEP -1 mention above. also provide the other input details as Document year , company code, plant and excise group. it will show the gl accounts as credit to Pla on hold account (intermediary account which nullify the step 1 debit balance impact) and debit to respective PLA accounts such as PLA account , PLA Cess account. and PLA S & H Account.
IF the above process resolve your issue kindly give the marks
Thanks & regards
Mahesh

Similar Messages

Wrong Opening balance in PLA register

Hai All,
I am gettig wrong opening balance in PLA for Sec Higher Edu. cess at the time J2I6. I maintained correct opening balance in J_2IACCBAL. Also in G/L accnt i made the same. I am geeting corrct values for PLABED & PLAECS. Here its taking value of RG23SECS
Plz Help me out..
Thanks & Regards
Raghu

Hi,
The opening balance in J2I9 will be picked from G/L accounts directly.
So check for the G/L balance for the period.
Regards,
Brinda

J2iu Not Showing Previous month Balances For PLA (High Priority)

Dear Gurus
We are using Transaction J2iu for Fortnight Utlization. Now When we are
trying to utlize PLA for the second Fortnight Of month March 07, The
System is only showing the Current Month Balances ie The Balances for the
month Of March 07 , And not accounting the balances for the previous months.
Kindly Suggest .

Carry Forward the GL Balances to Next Year i.e in Apr.07 &
then Try it out again.
Sometimes, System takes into account reatime balances & not balances as on particular posting date.
Regards..
Ameya...

Upload of opening balance in PLA & RG23A/C

Hi all,
I am trying to upload opening balances of RG23A & RG23C through Table J_2IACCBAL.
But system is not allowing me to upload the same, it gives following error
No table entries found for specified key
Message no. MO429
What can be the reason?
Is there anything in addition I have to do before uploading these opening balances through this table?
Please guide me.
Thanks
Sonal

Hi,
To upload balance you have to goto SE11, give database table "J_2IACCBAL", select Display, Menu "Utilities > Table Contents > Create Entires".

J2IUN - Problem RG23a, Pla register balances

Hi gurus,
We uploaded RG23A Part II in table as 2 crores as well as 2 crores in gl for that.
In pla we uploaded around 50000,
When we gone utilisation they system showing only 84 lakhs in Rg23a and in pla it is showing more then 2 crores, which we are not uploaded any balance in pla.
What would be the reason, please explain us.
Regards
Sreenivas.P

please check once in automatic account determination that which G/L a/c been congi for RG23A & PLA
path
Logistic Genrel -> tax on good movement -> India -> account determination -> Specify G/L Accounts per Excise Transaction
there will be some G/l account, copy them and display with transaction FBL3N to see the amount.
Rgds
S

Cin-no enough balance for utilization---excixe invoice

hi gurus,
when i am updating excise registers using t.code J1I5
i am getting the following error
*Not Enough Balance for utilisation*
Message no. 8I578
Diagnosis
The balance in the Account is not enough to carry out the current transaction.
Procedure
You need to increase the balance by either taking credit or depositing into PLA.
kindly help me
how to update the registers?
thanks and regards
munichandra babu
sloution1
Are you sure you are getting this when you do J1I5? You can deposit some amount to the register you are trying to update the material into through J1IH > Additional excise.
Please check if you have set any default in the table "Utilisation determination" (SPRO >LG >India > Business transaction > Outgoing excise > utlisation determination") If you have set 100% utilisation to happen from PLA then you have to upload some balance into PLA a/c through J1IH > TR6C , else use J1IH > Additional excise for Rg23A and C.
Sloution2
If you use J1i3 tcode for creating excis einvoice then the system will go for immediate utilization of the cenvat account and if there is no enough balance ie; cenvat from purchase is less then u will end with the above error message.
So in that case we cn go for J1iin tocde for creating exciose invoice.
Then the utilization will be done at the end of the month while submitting the returns to excise authorities.
and also just check out the procedure that is followed in ur company and go accordingly.
If they wanna go for immediate utilization then check whether they have made any TR6 challan payment and do the posting in system in tocde j1ih ---tr6 challan and increase the PLA BED balance and then do J1i3.
Sloution3
Hope u r updating the RG1 register. As there is no enough balance while creating outgoing excise , do the J1IH - TR6 Challan posting or J1IH - Additional excise to take credit entries of Cenvat.
Sloution4
Check the Configuration of CIN.
IMG >> Logistic General >> Tax on Goods Movement >> India >> Business Transaction >> Utilization ....
Sloution5
The details are very clear.
what is the balance do u want to carry out.
The error clearly mentioned the avilable balance is not enought to carry out the current transaction.
Please increase the balance by either taking credit or deposting into Personal Ledger Account.
hi gurus,
while creating excise in voice using the t code j1iin
i am getting the following error
Excise modvat accounts not defined for TR6C transaction and 2 excise group
Message no. 8I402
kindly help me
munichandra babu
sloution1
hi,
go to this path : Logistic Genral==> Tax on Goods Movement ==>India ==> Account determination == > Specify GL Acounts per excise transaction..
here u have to maintain ur Excise Grp, TR6C, Company code, chat of A/C and correct GL account.
I created a excise invoice for factory sale. While updating the register
J1I5 Update the RG 1 and Part I registers
it is not simulating. Why is there any customization setting i have to do or what?
kindly help in this matter
Sloution1
Hi,
You need to set the movement types that are relevant for various registers.
spro -> Logistics general ->Tax on goods movement -> India -> Business transaction -> Incoming excise invoices ->Specify which movement types invoilves excise invoices.
Please check that.
Sloution2
First create receipt entry for Classification Key "RMA" for movement type 101 and then create for Goods Issue with Key "IDH" for movement type 601
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices > Here specify 101 and 601 for RG1 Register.
While creating excise invoice. the invoice not picking up the value aed,bed . In billing document the condition is appearing
I put H in PR00 still it is happening like that
kindly help in this matter
Sloution1
pls check the condition type defined at the step, is it the same as used in Billing doc where the excise value is coming.
SPRO > Logistics - General > Tax on Goods Movements > India > Determination of Excise Duty > Maintain Excise Defaults
Sloution2
You need to check two things if condition values are not copied to the excise invoice.
1. Go to Logistics General>Tax on Goods movements>India >Basic Settings>Determination of Excise Duty>Maintain Excise Defaults
Here you need to maintain your condition types of your BED, Ecess, SHE cess in A/R BED cond, A/R Ecess cond and A/R AT1 cond. Then try to cerate excise invoice.
2. Go to Logistics General>Tax on Goods movements>India >Basic Settings>Determination of Excise Duty>Condition-Based Excise Determination>Classify Condition Types
Here you need to assign your condition types of BED total Ecess total and SHE cess total if you are using totals condition types. Otherwise you leave it blank.
Let me know still you have peoblem in this.
Sloution3
All Excise Component and Cess Totals (JEXT,JEAT,JEST and JECT) must have Statistical Checkbox marked in V/08.For the Condition records totals, select the Key Combination: Sales Organization with value: 100%.
Can you specify what Key combination for Basic Excise Duty (JEXP) you are using? I prefer the Country/Plant/Control Code/Material combination.
It is not out of context to mention here, that whatever your Condition Type for Basic Price (PR00 - ZPRI in my case) is, it must have the 'Condition Category' as H - Basic Price in V/06. This is an extremely important setting until made this setting,all Excise Calculations will go into a tizzy.
Check out the above and let me know.
Best regards,
Sloution4
The condition type which you are using as base value should have the condition category as H.....check this out and let me know...
Cheers
Sloution5
pls also check the configuration setting done at :
SPRO > Logistics - General >Tax on Goods Movements > India > Basic Settings
Sloution6
Thats means you need to have a balance for utilisation.
To solve this you can do one of the two things.
Create some puchase orders in MM. Whenever you purchase the excise duty is credited into your Rg23A part2. This will show in your utilisation balances in J2iun.
Or else you can post some amounts into PLA accounts in J1IH transaction using JVs.
I hope your configuration on all these accounts in LG- Tax on goods - Account determination is in place. If not you may have to do that before this.
Sloution7
If you use J1i3 tcode for creating excis einvoice then the system will go for immediate utilization of the cenvat account and if there is no enough balance ie; cenvat from purchase is less then u will end with the above error message.
So in that case we cn go for J1iin tocde for creating exciose invoice.
Then the utilization will be done at the end of the month while submitting the returns to excise authorities.
and also just check out the procedure that is followed in ur company and go accordingly.
If they wanna go for immediate utilization then check whether they have made any TR6 challan payment and do the posting in system in tocde j1ih ---tr6 challan and increase the PLA BED balance and then do J1i3.
Sloution8
are you sure you are getting this when you do J1I5? You can deposit some amount to the register you are trying to update the material into through J1IH > Additional excise.
Please check if you have set any default in the table "Utilisation determination" (SPRO >LG >India > Business transaction > Outgoing excise > utlisation determination") If you have set 100% utilisation to happen from PLA then you have to upload some balance into PLA a/c through J1IH > TR6C , else use J1IH > Additional excise for Rg23A and C.
Sloution9
Hope u r updating the RG1 register. As there is no enough balance while creating outgoing excise , do the J1IH - TR6 Challan posting or J1IH - Additional excise to take credit entries of Cenvat.
Please maintain the customizing settings for automatic utilization
Excise modvat accounts not defined for TR6C transaction and 2 excise group
Message no. 8I402
Sloution1
Go to IMG Path -- Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Series Groups.
Here for the combination of your Series Group and Excise Registration, select the box Imm util This will solve your first issue
For your second issue, again select the next tab Account Determination and click on Specify Excise Accounts per Excise Transaction. There maintain as follows:-
ETT::SubTmTy::::DC Ind:::::::::::Account Name
TR6C::::::::::::CR Credit::::::PONHLD PLA on hold account
TR6C::::::::::::DR Debit:::::::PLAAT1 PLA AT1 Account
TR6C::::::::::::DR Debit:::::::PLABED PLA BED account
TR6C::::::::::::DR Debit:::::::PLAECS PLA ECS Account
TR6C::::IP::::::CR Credit::::::ONHOLD CENVAT on hold account
TR6C::::IP::::::CR Credit::::::PONHLD PLA on hold account
TR6C::::IP::::::DR Debit:::::::PLAAT1 PLA AT1 Account
TR6C::::IP::::::DR Debit:::::::PLABED PLA BED account
TR6C::::IP::::::DR Debit:::::::PLAECS PLA ECS Account
TR6C::::IP::::::DR Debit:::::::RG23BED RG 23 BED account
TR6C::::IP::::::DR Debit:::::::RG23ECS RG 23 ECS Account
Once you maintained the above, click on next level Specify G/L Accounts per Excise Transaction. Here for the combination of Excise Group, Excise Transaction Type (TR6C) and Company Code, maintain the relevant G/Ls and save.
Sloution2
Create the Excise Group and assign the Modvat a/cs.
Sloution3
go to this path : Logistic Genral==> Tax on Goods Movement ==>India ==> Account determination == > Specify GL Acounts per excise transaction..
here u have to maintain ur Excise Grp, TR6C, Company code, chat of A/C and correct GL account.
Sloution4
go to this path : Logistic Genral==> Tax on Goods Movement ==>India ==> Account determination == > Specify GL Acounts per excise transaction..
here u have to maintain ur Excise Grp, TR6C, Company code, chat of A/C and correct GL account.
STILL I AM GETTING THE SAME PROBLEM
KINDLY HELP ME
WHERE I HAVE TO MAINTAIN THE BALANCE FOR PLA A/C
t.code or path
THANKS AND REGARDS
munichandrababu

Hi Munichandra Babu,'
Goto J1IH and select TR6C and then select the accounts for which you want to post the amount. Enter the amount and Save. Before saving dont forget to post the cumulative accounts amount in PLA on Hold Account.
Best Regards
Sri

Field details of available balance in J2IUN

dear all,
In J2IUN utilization transaction the column of available balaces are from either RG23 BALANCE and PLA.
but can anybody reply how and from which tables the values are picked and calculated for the available balance field.
Regards,
Vimlesh

.

Opening Blanace for PLA Account

Dera All,
When I enter the Opening balance how do I enter the opening balance of PLA Account. Generally when the payment to PLA is made there is a discretion that the PLA is being paid against which components (like BED, Cess & HCess). But when I put the opening balance no such discretion is available if I put the opening balance through the "GL Account Opening Balance". The outcome is, it does not show in the Tax Payment wizard also. How to resolve this? Do I have to post an outgoing payment ith the back date of the previous fiscal year?
Please suggest a way out to this.
Thanks and regards,
Raj.

Make a PLA outpoing payment entry with a dummy serial number choosing a opening balance account as a cash account. It works fine and the amount gets reflected in Tax Payment Wizard . A journal entry also will be passed simultaneously when an outgoing payment done .
Thanks
Best Regards
Balaji

Question - Excise and V A T.

Hi All,
Can i Have Information on Excise Duty And VAT in Business One Scenario.Can anybody Provide me With Details.

Hi,
Please read the following document which explains answers to your questions
https://websmp205.sap-ag.de/~sapdownload/011000358700006192062006E/IndiaLocalization_2005B.pdf
Check page no. 29 which explains "Creating Opening Balances for PLA/ CENVAT"
Also have a look at the following Blog, Implementing SAP Business One for India Localization
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/junior/view/wlg/10739
Hope this will help you.
Regards,
Abhishek

J2IUN - Porblem

Hi gurus,
We uploaded RG23A Part II in table as 2 crores as well as 2 crores in gl for that.
In pla we uploaded around 50000,
When we gone utilisation they system showing only 84 lakhs in Rg23a and in pla it is showing more then 2 crores, which we are not uploaded later on any balance in pla.
What would be the reason, please explain us.
Regards
Sreenivas.P

Hi
Have you checked the GLs assigned to transaction type UTLZ???
Regards
Sanil Bhandari

CENVAT utilization by Manual Journal Entry

Hi All,
Can anybody explain me the process of cenvat utilization by passing Manual Journal Entry.
Please reply fast
Regards,
Abhishek

Please read the following document which explains answers to your questions
[https://websmp205.sap-ag.de/~sapdownload/011000358700006192062006E/IndiaLocalization_2005B.pdf]
Check page no. 29 which explains "Creating Opening Balances for PLA/ CENVAT"
Also have a look at the following Blog, Implementing SAP Business One for India Localization
[https://www.sdn.sap.com/irj/sdn/weblogs?blog=/cs/junior/view/wlg/10739]
Edited by: Sridharan T on Sep 8, 2008 11:14 AM

Monthly utilization error in J2iun

Dear SAP Guru's
Please help me I am unable to do the monthly utilization by J2iun for local excise invoice.
1) The series is maintained for no immediate utilization( check is un ticked) for immediate utilization for local excise.
2) for Export excise invoice it is working correctly as immediate utilization check is enabled.
3) For local excise utilization even though the settings are there for monthly or fortnightly utilization even then it is utilizing immediately in J1iin
Please help to resolve this.
Regards
Umesh

Just a brief description:
J2IUN for the month of March(FY-2009). following points are checked in my system.
1. PLA account Balances are posted using T.code J1IH through TR6 Challan for March Month(FY-2009).
2. PLA Balances Extracted in J2I5 and print in J2I6(FY-2009).
3. PLA Balances are updated in Table j_1ipart2 automatically when we do 1 and 2 points.
These above things has been done, but PLA account Balances (Even PLA accounts description) is not displaying in Utilization.
Note: Up to Feb Month Utilization done properly even PLA accounts also displaying so we utilized.

Error in J2IUN - Monthly Utilization

Dear Experts
I'm running monthly utilization using T code J2IUN. Here the PLA account is not populating for BED duty. but all the carry forward and account balances are available.
Kindly Guide me through this problem.
Regards
JK

Just a brief description:
J2IUN for the month of March(FY-2009). following points are checked in my system.
1. PLA account Balances are posted using T.code J1IH through TR6 Challan for March Month(FY-2009).
2. PLA Balances Extracted in J2I5 and print in J2I6(FY-2009).
3. PLA Balances are updated in Table j_1ipart2 automatically when we do 1 and 2 points.
These above things has been done, but PLA account Balances (Even PLA accounts description) is not displaying in Utilization.
Note: Up to Feb Month Utilization done properly even PLA accounts also displaying so we utilized.

Only BED is shown in Transaction J2IN

Dear Experts,
Only BED values are shown for utilisation in Transaction J2IN-Monthly utilization
               Duties:
                    Duty                Payable Amount         Amount Remaining
                     BED     160,683.62                  160,683.62
     AED     3,600.00                  3,600.00
     ECS     3,287.78                  3,287.78
     SECS     1,642.84                  1,642.84
              Utilization
                   RG23ABED     2,983,873.40                            2,983,873.40
                   RG23CBED     42,442.51                            42,442.51
                   PLABED     418,326,364.61                            418,326,364.61
Here AED ECS and SECS Values are not displayed for utilization.
Plz Help!!
Ranjit

HI,
In utilasition top screen refers the sales gl accounts means exsice payable to execise dept.
In bottom screen credits avialable from purchases rg23a part 2, credits availble from capital goods and PLA balances (pla can be update through FB50 & J1iv) for utilisation
for example, In J2IUN Select the BED playable (top screen) and go to details tab the you found the BEDRg23A balance, BED RG23C balance and PLA BED balance (In bottom screen). Enter the amount euqal to top screen any of these balaces and similary SEC and Sheces.

Plz problem in J2IUN

Dear Experts,
When we are doing Cenvat Utlization with closing period ( 31.03.2009) with J2IUN there all Cevat Come without PLA Cenvat plz explain where is the problem.
RCR

Hi
PLA Account will display at J2IUN, if the balance is available.
Kindly check the balance of PLA with help of FI consultant
regards
Prasanna

No balance in pla

Similar Messages

Maybe you are looking for