No NON-Universal binary program will run

So after loading itunes 7.0.2 for my new shuffle, my non universal binary programs will run. not sure where to put this questions. When you go to run the program it will bounce once in the dock and won't open. Universal binary programs work fine.
Steps I have taken
1. reloaded a program so see if it would work
2. repaired disk
3. repaired permissions
4. created separate user and ran program under that user
5. Reset the PRAM
6. tried something called update pre-bindings, but this wouldn't work.
does anyone have any ideas

Archive and install installs a new System Folder next to your old System Folder, with your old User settings. For more details, please look at this KBase article: http://docs.info.apple.com/article.html?artnum=301270
Afterwards, you should reinstall third party applications. In the installation dialogs, you can choose which languages you want to install.

Similar Messages

Will non-universal-binary Logic+plugins run on an Intel Mac?

Hi,
this may sound like a dumb question, but I haven't found a straightforward answer on this question yet: will my Logic 7.1 (not Universal Binary) install on an Intel-Mac?? Our local Mac store expected that Rosatta will take care of everything, and that only performance will suffer a bit.
That would mean that all non-universal-binary plugins would run, too??!!
Just curious...
Thanks!
Regards,
Jaap
eMac Mac OS X (10.3.9) Logic Express

Hi Jaap,
In a word, nope!
It seems you're more informed than your local dealer, :o)
Rosetta will not handle the plug-ins & third party (AU) need the (U B) upgrades. You need the 7.2 (U. Binary) to run logic on the new Intel machines.
Best regards,
Jorge

HT202157 When watching shows the program will run for 30 sec. go off then turn back on after another 30 seconds. Why?

When watching programs will run for 30 seconds and then stop and come back on. Why?

"as evidently the fan draws air from the keyboard in order to stay cool."
This is a common misconception. Yes, ambient heat radiates from it, as it does from any part of your machine. But the keyboard was not designed, in any capacity, for heat dissipation and covering it will not raise internal temperatures to any noticeable degree.
Within 14 days of purchase Apple will give you a brand new model.
If you wish, you can download this software and post the temperature output from the machine upon wake. You can take a screenshot of the temperature readings:
iStat Menus, a Mac app by Bjango

MS Office 2011 won't open ager my Mavericks install. I've reinstalled Office, but none of the programs will open. Ideas? Thanks!

Any help available? MS Office 2011 won't open after my Mavericks install. I've reinstalled Office, but none of the programs will open. Ideas? Thanks!

All updated to the current version?

Universal Binary programs for processing RAW images

Hi,
Are there any universal binary programs for processing RAW files (from my Nikon D200)?

I currently use a D-70 and have had no problems importing and manipulating NEF files with iPhoto 6.0.1. I would assume that the D-200 uses the same file structure as the D-70, doesn't it?
intel iMac 20"; 1.67 GHz PB G4; Dual 2.3 GHz PowerPC G5 Mac OS X (10.4.5)

Program will run on one 8.1 computer, but not a better 8.1 tablet.

I have 2 computers I'm trying to run a program on, but it only works on the lesser of the two! The program just shows a 3d image that the user can rotate to view and clicking other options it will play different video files. The program was written by an
outside company and I do not have funds to have them help me.
Computer 1: Dell all-in-one computer. Touchscreen, Core i5, Windows 8.1, 8gb RAM.
Computer 2: Dell 18" XPS tablet, Core i7, Windows 8.1, 8gb RAM.
The program is a Winrar, when extracted it runs perfectly fine on computer 1, it can be closed and reopened normally. Computer 2 will allow the program to be extracted, it will run ONCE. After you close the program and try to re-run the program it will only
show a white screen. The touch screen works to control settings in the program (such as volume and exit button) but it only displays a white screen. If the program is deleted and re-extracted (created a new version), it will work the 1st time it's ran. I've
updated to the newest windows updates, silverlight, drivers, EVERYTHING I can possible think of. Still will not let the program be ran more than once.
Does anyone have any idea what could cause this to happen?

From the description you provided regarding the white screen of the second computer, it sounds as though the application is experiencing a component issue. This would allow the application to launch, but certain content does not render as expected. Here
are some things I would suggest to try:
Ensure that the directory in which the files are stored is identical on both computers and that directory has the same permissions on the two systems. If WinRAR extracts the application files to another directory, even a temporary one, this is the directory
on which the permissions should be verified.
EXE files that open with WinRAR are typically self-extracting archives, meaning the animated application you are describing is actually held within an archive. This file could be extracted with WinRAR and run from a separate directory.
You could try compatibility mode and/or run as administrator. In either case, if the application is held in a self-extracting WinRAR archive, you will need to extract the files and enable compatibility mode on the application EXE, not the self-extracting
EXE.
From the description you provided of what the application is and does, it sounds as though it might require components from underlying frameworks or technologies. I would ensure that the same version of Java, Flash, .NET, etc. is present on the second computer
that appears to work on the first.
Brandon
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

No programs will run even finder after an update even in safe mode

I tried installing the newest update in my macbook pro and after my comp ran out of battery no programs including finder will run even in safe mode. I get and error message that says finder quit unexpectedly over and over again.
any help would be awesome
thanks
kurt

[[Firefox 18 crashes on startup due to malware - how to fix]]

TS1702 was not having any problem running apps Now now none of the apps will run

Was not having any problems running any apps on my ipad3 and now none of the apps will launch all apps were with obtained through apple app store the only thing different was on Sun I connected my pad to my pc for the first time to transfer some music to day was the first time I tried to run any apps since then.and that's whei encounter the problem

Download another app - any free app is fine. See if that helps.

What slideshow with music maker program will run on Mac Powerbook G4?

What slideshow with music maker program will install and run on my Mac Powerbook G4 1.5.8 1.33 GHz OSX laptop? Or are there any out there, I know my system is old but it's all I got for now.

There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089
All above suggestions will work on a PPC Mac running Leopard.

Not all programs will run on this model?

I am not actually a Macbook Pro owner, or even the owner of a Mac at all, but I am looking to buy one. I recently heard that not all Universal and even some native applications that don't come pre-installed when the computer is purchased cannot be run on the Macbook Pro. My questions are as follows:
A) Is this true?
B) Any estimates on when this problem will be remedied?
C)If the problem is not fixed before I purchase the computer, is it possible to upgrade it later?
Please forgive my computer stupidity, if my questions seem stupid, it is because I am new to Macs and to computers as a whole...
Macbook Pro Mac OS X (10.4.6)
Macbook Pro Mac OS X (10.4.6)
Macbook Pro Mac OS X (10.4.6)

Everything that comes on the computer runs fine - and very very fast.
i) Other Universal apps should be fine - that's the reason they are universal - to run on intel macs.
ii) Pre intel apps (called Power PC apps) run through a "translation" layer called Rosetta. Sometimes this slows them down a bit, but most apps will run pretty well.
MS Office runs in Rosetta. No problems - maybe a bit slow if you had a previous G5. Adobe CS2 runs in Rosetta - mostly trouble free.
In Power PC macs you could still run "Classic (OS 9) apps - This is no longer possible, but these are mostly really old - OSX came out in 2001.
If you have something specfic you want to use, people here can advise - Or you can list what you use on a PC. Apps bundled on the machine and universal apps are fine.
A few small matters are outstanding - e.g. wmv playback, but there are ways of playing wmvs using Rosetta and solutions are imminent.
Best of luck.

Non-universal binary drivers--risky?

I have a Lexmark x75 PrinTrio printer/scanner and since it was the handiest scanner I had when I needed to scan something on my Intel iMac, I downloaded the driver and installed it. Due to the absence of Print Center, the printer part (which I don't need anyway) didn't complete its configuration, but the scanner is working fine.
Depending on which page you visit on the Lexmark site, the driver either is or isn't Tiger compatible and it's PPC native, not a Universal Binary. There's nothing more up to date to run this scanner with, and nothing bad happened when I made the scan... is it safe to use such an old driver that isn't Intel native? If not, how should I best get rid of it (the Installer doesn't have an uninstall option and it didn't produce a log that I could find)?
Thanks,
Bill

As long as it's working properly, I wouldn't worry about it. I can't see any problems with running a scanner driver in Rosetta; it shouldn't affect anything else.

I'm running Windows 7 and occasionally, Firefox will become completely unresponsive and grey out, then none of my programs will open at all, including the Start menu, forcing me to use a hard restart and shut down. Any help would be appreciated.

I'm not able to close and restart Firefox at all, since the computer becomes completely unresponsive, save for mouse input. Task Manager is also of no use.

Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

Program will run with errors, but not at all in a .jar file

First off, here is my program right now:
import java.io.*;
import java.util.*;
import javax.swing.JOptionPane;
public class prune
    public static void main(String args[])
        String steamid="",time="";
        BufferedReader infile = null;
        BufferedWriter outfile = null;
        FileReader fr = null;
        FileWriter wr = null;
        StringTokenizer strtk = null;
        String line = null;
     JOptionPane.showMessageDialog
      (null, "Vault.ini Pruner v2");
     String filepath = JOptionPane.showInputDialog("Enter the filepath to your vault.ini file.");
     String strdeletenumber = JOptionPane.showInputDialog("Enter the number that vault entries under will be deleted");
     int deletenumber = Integer.parseInt(strdeletenumber);
        try
            infile = new BufferedReader(new FileReader(filepath));
            outfile = new BufferedWriter(new FileWriter(filepath));
        catch(IOException ioe)
            JOptionPane.showMessageDialog
      (null, "Can't open vault.ini:" + ioe);
        try
            while((line=infile.readLine())!=null)
                strtk = new StringTokenizer(line);
                steamid = strtk.nextToken();
                time = strtk.nextToken();
                if(Integer.parseInt(time)>=deletenumber)
                    outfile.write(steamid);
                    outfile.write(" ");
                    outfile.write(time);
                    outfile.newLine();
        catch(IOException ioe)
            JOptionPane.showMessageDialog
      (null, "Error:" + ioe);
        try
            outfile.close();
            infile.close();
        catch(IOException ioe)
           JOptionPane.showMessageDialog
      (null, "Error:" + ioe);
            System.exit(0);
}The program is supposed to open a vault.ini file and delete entries with a number lower than specified.
Vault files are set up like this:
STEAMID:X:XXXX 100000
Right now if I run the program through command prompt it erases both the vault.ini and new vault.ini. I am also trying to put it in an executable jar file and when I do that I get a "Failed to load main class manifest attribute" error. Any ideas on what is causing this?

I don't know what is happening. I put your exact code into a small build environment and used a build file for ant that I have and it works just fine. Manifest files are a total pain which is why I use a tool to generate it. I know that the last line has to be blank and that no line can be over a certain length.
You've now spent several days avoiding ant and I got it running with ant in about 3 minutes. I'm really missing something.
For reference, the build file is below should you change your mind. Put your prune.java in a new directory named "src" and save this file below as build.xml in the parent directory of "src". Run the program with java -jar lib/prune.jar
<project name="jartest" default="main" basedir=".">

    <property name="src.dir" location="src" />
    <property name="dest.classes.dir" location="classes" />
    <property name="dest.lib.dir" location="lib" />

    <property name="dest.lib.name" value="prune.jar" />
    <property name="main.class" value="prune" />

    <property name="compile.debug" value="true" />
    <property name="compile.optimize" value="false" />
    <property name="compile.deprecation" value="true" />
    <property name="compile.source" value="1.4"/>
    <property name="compile.target" value="1.4"/>

    <target name="main" depends="compile,jar" />
    <target name="compile">
        <mkdir dir="${dest.classes.dir}"/>
        <mkdir dir="${dest.lib.dir}"/>
        <javac srcdir="${src.dir}"
                     destdir="${dest.classes.dir}"
                     debug="${compile.debug}"
                     deprecation="${compile.deprecation}"
                     optimize="${compile.optimize}"
                     source="${compile.source}"
                     target="${compile.target}" >
        </javac>
    </target>

    <target name="clean">
        <delete dir="${dest.classes.dir}"/>
        <delete dir="${dest.lib.dir}"/>
    </target>

    <target name="jar" depends="compile">
        <jar destfile="${dest.lib.dir}/${dest.lib.name}"
                basedir="${dest.classes.dir}">
            <manifest>
                <attribute name="Built-By" value="${user.name}"/>
                <attribute name="Main-Class" value="${main.class}" />
            </manifest>
        </jar>
    </target>
</project>

None of my Programs will open!

When I open CC on my computer, it shows all the apps I have. When I try to open them the message "Adobe Application Manager, required to stat your trial, is missing or damaged. Please download a new copy of Adobe Application Manager from http://www.adobe.com/go/applicationmanager. So I do just that, but then when I try to open up the programs, the same message shows up. I am running on Windows 8. Please help!

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

In Photoshop CS 6 (64 & 32), I get the error "cannot complete command because the extension could not be loaded". I can click to pass this, but none of my extensions will run. If I click on "browse in Bridge" I get "Could not complete the command Browse

Further info is that I have a current update of the JavaScript as of now, my Adobe software is all updated, as is my Windows 7 software. Everything was running fine until yesterday, and the only changes to my system were the Tuesday Windows updates. Can anyone help me resolve this problem?

I unstalled Photoshop. Then I installed on another drive. External. It did the same thing!!!! No mini-bridge, or any extentions loading. I don't know what is wrong.
I read something somewhere about a Panels file in photoshop. So I'm looking there.

No NON-Universal binary program will run

Similar Messages

Maybe you are looking for