No records for cube in production!

Hi,
we have a strange ituation where in i am finding records for a cube in dev but not in production!
i had transported right from infoobjects ( which i had added in dev for cube enhancements ) to update rules to production but still i did not find any records in production!
can u pls tell me what could be the problem? or i had missed something in transportaion?
Thanks,
Ravi

Hi,
I don't understand.... Do you expect to see the same records in your cube in your prod sys than in your deve sys just by transporting the change?
No: you have to load your cube with data in prod!
or do you think that when adding a new IObj in a cube and transport the changes then the new IObj will be populated?
No either, you'll have to reload your data.
please describe in detail your issue
hope this helps...
Olivier.

Similar Messages

How to enhace business content extractor for cube in production

Hi All,
I want to run report based on 0MATERIAL on two cubes 0PCA_C01 and ZCOPC_C08. I dont have 0MATERIAL in cube 0PCA_C01.
Both of the cubes are in production. I am trying to enhance the data source 0EC_PCA_1 (for cube 0PCA_C01) to bring in 0MATERIAL.
> Is this the right way to do it?
If it is then, do i need to write the code in funciton module after appending the 0MATERIAL fields to the
data source. does any body have the code or plz help me step by step to write the code in CMOD....which tables should i go to get the 0MATERIAL.
> Most importantly, does enhancing the datasource 0EC_PCA_1 with omaterial affect the omaterial in the datasource for my second cube (can the same infoobject be in two data sources..bcoz master data is common for all cubes)....
I want to do this right....as both the cubes are in production.....plz help me..
Plz address any issues like data loss bcoz of enhancing datasource in production or something like that
thanks in advance,
> useful inputs will be rewarded

Hi Aravind,
You need to have a foreign key relationship with the base data to material to bring material no as a transaction data. There has to be a link from where you can extract the data. FIrst you see if this link is available in any other ods in BW itself. For example, if you have the vendor details in your cube, see if you can get the material from the AP ods. this depends on your implementation.
If you do not drop the cube load, how will this value be updated to the old data. Assuming you are doing deltas, the new records coming in will have this data filled but the data that already sxisted will not have this data. So, I think you will need to drop the load.
I know the amount of data could be huge but if you have to get the data from R/3 (this is if the data/link i mentioned above is not available in BW), you have to enhance the data source. In this case, you can not avoid datasource enhancement.
You can create a Zmaterial and load it from 0material. This will not help you. By doing this, you will be creating another master data. Even if you include this master data zmaterial in your cube, since you can not map it in the update rules, it will not help you. See if you can lookup this value from some other ODS.
Hope this helps.
Thanks and Regards
Subray Hegde

Aggregates for Cubes in Production

Hi,
My client has a few cubes in the production system that they would like to improve performance in. I was planing to build aggregates for them. Is it okay to build aggregates for Cubes already in the Production System, do i have to do anything before i transport the aggregates in the Production system (such as delete all data from Production)?
Thanks

Hi Dave,
Dependant on your Prod rights, you should be able to do it directly on the PROD box.
In most cases you would start of with looking at aggregate proposals from the system. With DEV data this would most likely never apply to PROD as well, as the one is test and the other live data.
Most clients always apply directly in PROD. You don`t need to reload or delete data. Just fill the created aggregates manually before the batch runs at night for safety sake...
And don`t collapse as yet! You could always delete the aggregates...but having the collapse set on as well, compressed data can not be altered or reverted on if required after wards.
Martin

Import multiple info records for 1 material item in repository

Hi Guys,
I have got sort of a puzzle I can not solve at the moment, maybe some one can help me to solve it. The situation in our system landscape is as follows:
Systems:
SRM 5.0 (Classic implementation scenario)
ECC 6.0
SRM-MDM 2.0
PI 2005
Material master is maintained in R/3 and the materials are replicated to SRM. From SRM we replicate all materials to the catalog repository in SRM-MDM.
As the material master in R/3 is vendor independent, the materials replicated to SRM also have no vendor attached. For the first initial material replication from SRM to the catalog SRM-MDM this also means that the products in the main table of the repository, u2018catalog positionsu2019, will not have a vendor or vendor number attached (i.e. no reference to a source of supply).
To assign a source of supply in the repository to a product (record) we will use info records which are replicated from R/3 to SRM-MDM. The mapping for this in the Import Manager can only be based on the product number. As this is the only unique value available which can map a info record to a already existing (but vendor less) ptoduct item in the catalog.
As long as every item in the repository has only one unique info record, meaning one source of supply with a specific price, there is no issue in the above scenario. Based on the product-id, the info record data will be matched with the material item in the catalog.
The issue for me arises when multiple info records exists for the same material. The info records can heave different vendors and different prices. All possible vendors should be available in the catalog for the same material (at least this is the requirement ).
At this point the product-id will no longer be an unique value. Importing the info records will cause problems, as only one material record is available in the repository for the specific product-id (remember that when doing a initial replication of the material master to the catalog, no vendor data is replicated).
Does anyone had this issue before, and knows a solution? Is it for example possible during the import of the info records in the Import manager, to duplicate material records in the destination data, based on the number of info records available in the source data for the same product-id. Or is there an other solution that I am missing?
Your help would be appreciated!
Regards,
Skander

Hi Shai & Ravi,
Thanks for your answers. The MDM version which we are using is 5.5 - currently on SP6
@ Shai: you are right; the standard SRM-MDM 2.0 catalog repository has a qualified lookup table u2018priceu2019, in which itu2019s possible to store the info record data. The standard fields in this sub-table are: Purchase Org, Amount, Currency Lower B, PIR-ID, price based quantity and Price based quantity UoM.
I added some extra fields (non qualified), to accompany the remaining info record data (product no. u2013 vendor id u2013 product category) which is exported/imported, via the standard extraction program in R/3: Tcode MECCM
I tried the solution Ravi proposed. This scenario works fine when, for example you want to maintain multiple info records for one specific material record in the main table (all info records related to the same source of supply, i.e. vendor). But as I described, the info records we import for one product can have different vendors.
The source of supply (vendor) in the shopping cart of SRM is determined via the u2018supplieru2019 field in the main repository table (which is in itself a flat lookup table ). What happens now is that all related info records are added to the u2018price informationu2019 field of the specific product record in the main table. Thus info records which have different suppliers are attached to a record in the main table which will have one specific supplier in the u2018supplieru2019 field. So from my point of view this will not work.
I am still stuck with the situation that the material master import will only import one record for every distinct product, which can have multiple info records. The info records can/will have different vendors. As the supplier field in the main table determines the source of supply in the shopping cartu2026. Iu2019am seeking for a solution which will duplicate the material records in the main table, based on the amount of imported info records for that specific material record, that have distinct vendors.
Shai, if you have some useful info on how you accomplished this requirement on a previous version of SRM-MDM, it would be greatly appreciated if you can share it..
Thx.
Skander

TS1559 I bought my iphone 4s in usa apple store but when i write my serial number to support center i see warning like that. What is the problem ? Our records indicate that this product has been replaced. Please provide the serial number for your replacem

I bought my iphone 4s in usa apple store
ihave trouble with my iphone wifi that is gray and cannot connect any wifi network.
i want to support for this issue.
but when i write my serial number to support center i see warning like that. What is the problem ?
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.

Nobody here would know. Contact Apple and ask them

When we drilldown at document level it displays one record for each cube

Dear Experts .
The users want to see the report by status for the order detail report at document level it displays one record for each cube .
They want to see the single line for the order quantity , Amount, Billing quantity delivery and amount along with the Sales order number , billing document number billing date , delvert date ..et in signgle line. ( Sale order DeliveryBilling)
When we are doing on Multiprovider recording displaying from each cube.
We have tried with Constant selections and it is not giving the required results m since these want to see by status. Due to huge data performance reasons we re unable to use it .
Please provide your valuable inputs.
Thanks,
Mahesh.

Mahesh,
If you want to get detail data with respect to Sales order - delivery - Billing, on top of Multiprovider you can come up with Constant selection.
But I am not clear that why constant selection is not working properly, can I have some light on that.
Probably, you are struggling with multiple records .
I suggest you to go with end routine and map all fields to one IC and do reporting on that single IC, then your requirement will fulfill.
But here we need to take care of performance issues and process chain scheduling wile loading deltas.
If Multiprovider is not working properly , then try with Infoset(If you have more than 2 ICs it not possible).
Regards,
rvc

Loading the cube from 3 datasources and getting 3 records for each keyfield

Hi All,
I am loading an InfoCube from 3 separated datasources. These 3 datasources are UD Datasources and their unique source system is UD Connect.
Each of the datasource contains a unique key field 'Incident Number' (same as we use have in Datasources for DSO).
The problem is, when I am loading data with these 3 datasources to the cube, for each 'Incident number' there becomes 3 records.
We have reports on this Infocube and the report also displays 3 records for each incident number.
If I remove Incident Number key field from 2 of the Datasources, the data from these datasources do not reach to the Cube.
For many of you, this may be a minor problem ( or may not be a problem at all !!! ) , but as a New Joinee in SAP field, this has become a showstopper issue for me.
Please suggest.
Thanks in Advance.

Hi Pravender,
Thanks for your interest.
The scenario is, I have 3 datasources form the same source system, All the 3 datasources have different fields except 'Incident Number'. So, each and every field has only one value in the report. But due to 3 separate datasources, it creates 3 records displahying values of each datasource in a separate record.
There is no field in the query output which is having different values for the different source systems. Due to 3 records in the cube, one record will contain the value for a particular field and the other two records will show a Blank for that field.
Regards.

HT201412 my iphone using cant buy anything from itune store and they said i have trouble from the product (Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warr

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please ( this is the trouble they tell us )
can't buy anything application on appstore, i bought this iphone from my friend , and this iphone actived ( 2012-11-05)
IMEI: ****
<Edited By Host>

Instead of posting your IMEI in a public forum, contact iTunes Customer Support.
FYI, they do not want/need your IMEI number.

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.

Hi,
i have purchased iphone 4s 16GB in india yesterday and when i m checking warranty status of my phone from https://selfsolve.apple.com/agreementWarrantyDynamic.do
i got responce
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.
Please help

hi
if it is from gray market is there any harm on that please let me know
my phone is working fine and even when i connected to itunes it got registered with my id,

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us." how does this possible..???

I have a horrible time with my new Iphone-4, No SIM card found issues and while i tried to contact customer care with device serial number getting a messgae of "Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us."
What step should i take next.

Where did you get the phone?
That phone was replaced by Apple or an AASP and was not returned to Apple as it should have been, or it was stolen from Apple or somewhere in the supply chain.
You can not get support from Apple for that phone.
Return it to wherever you got it and get your money back.

How to get the sample repository data of over 6000 records for products

Hi,
I have MDM installed and ready to use with the standard 9 repositories provided by SAP. I was wondering if I can get the unarchive .a2a file with the sample data of records (I think over 6000 records) for the Products repository. I have tried to bring in the two .a2a product files that I have, but it was giving version inconsistent errors. How do and where do I get the real sample data (not the one we can create in data manager) correct version provided by SAP, so that I can get my hands on SAP data manager funtionality.
Thanks in advance,
N@v!n K

Hi Navin,
Business Content archives that are provided by SAP for MDM do not come with the sample data.
In the bsuiness content ,if you unzip the file you will see the a2a archive of the rep as provided by SAP and the import /export maps and the lookup data file.
There is no main records that SAP provide with the sap content it is basically the data modell that SAP provides so that the foundation is set for you and you can now import and work with the data.
However if you wish to use the demo repository or the training rep from Inquera then you will same some sample data already loaded in MDM rep to work upon.
Regarding the version problem
Check the MDM version of the business content rep with the MDM server you are using .They have to match to work correctly.
You can work with a lower archives of the rep(say SP04) with an Upgraded MDM server (say SP06) by using the Update Repository option in the context menu of the MDM server in Console.
But the vice versa is not possible.
Check you MDM server version by clicking on the MDM server and see its details in the right side record detail pane.
To know more on the demo and Inquera rep kinldy view the below links:
https://www.sdn.sap.com/irj/sdn/nw-demomodel#section21 (Demo Rep)
http://www.inquera.com/InqueraCatalog/CustomerLogin.asp(Demo Rep from Inquera you need to register and they will mail you)
Hope It Helped
Thanks & Regards
Simona Pinto

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information.

hi
if it is from gray market is there any harm on that please let me know
my phone is working fine and even when i connected to itunes it got registered with my id,

Downloading Pricing condition records for products from ECC to CRM

Hi All,
I have a requirement where i need to download condition records for products from ECC to CRM. The Inputs available for me are Product Id or the material number and the Sales org data.Kindly let me know the step by step procedure that i should follow to download the condition records for the products.
Note: 1. The Products are already in the CRM system.
2. I have downloaded the adapter object "DNL_CUST_CNDALL" already.
Thanks & Regards,
Shwetha.

First of check and ensure that if the records are already downloaded. To do so,
1) Log to ECC system and go to tcode V/06
2) From here select the condition type you are looking at. Dbl click on the condition type and note down the access seq.
3) Go to V/07. seelect the access seq you obtained in previous step and dbl click on "Accesses". Here you will come to know the condition table numbers. Note down the table numbers. (example: 002, 567)
Understand at this juncture that tables from 1-500 are SAP Standard tables and 501 - 999 are customer specific tables.
1) Log to CRM system and go to se16
2) Type CNCCRMPR002 or CNCCRMPR567 and Choose F4 from keyboard.
3) you should find an entry which looks like CNCCRMPRSAP002 or CNCCRMPRCUS567.
4) query the table with input parameters like Product or Sales Org. YOu should find the records.
If you fail in step 3, it means that the table itself has not come to CRM. For this do DNL_CUST_CNDALL with OPEN client (go to SCC4 and there Dbl clik on your client. There "NO CHANGES ALLOWED" should not have been selected. If it is so, consult your basis team and explain that DNL_CUST_CNDALL should be done on open client.(Repeat this even if you have already done that)
If you fail in step4, try downloading DNL_COND_A*** adapter Objects. *** stands for the ECC condition table captured from ECC (step3)
If you still are unable to find the record in the database table level, Check for the log in SLG1 tcode in CRM system. This gives you an idea of what's wrong.
Note: Even if you maintain conditions via Product master, ultimateley it gets stored in A* tables in ECC and CNCCRMPR* tables in CRM. So the above procedure holds good for whatever the case might be.
Hope this helps
Regds,
Raghu

How do know the number of records ina cube for particular restriction

Hello all,
When you do right click on cube and display data then you have option to choose the fields. Lets say I restrict show me all the records for fiscal year "2006" then wgere can I see actually how many records there are of 2006.
Thanks

Hi Raj,
By using LISTCUBE you can put a check mark for Output Number of Hits:
If you do not select all fields in the field selection for output and have activated the database aggregation, several records may be collected together into a single record. If you select the option 'No. of Hitsoutput', an additional key figure is generated in the output table that specifies how many records the current record is made up of, that is, how many database records have been made into the output record.
You can also use this option to determine how many records there are in a particular selection condition in the InfoCube. Specify a selection condition, but do not select any characteristics or key figures. In the return list, you only get the column return with the number of hits and the number of entries that are relevant for this selection condition.
Hope this helps...

CUCM 9.1 Call Recording for analogue devices

Hi,
We are designing a CUCM 9.1 solution where Active Call Recording for analogue devices feature is required.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmfeat/CUCM_BK_CEF0C471_00_cucm-features-and-services-guide_chapter_0100110.html
According the feautre list support it seems that is supported by the old ata 186 but not by the ata 187.
Then, how could we achieve this on a new deployment? Has anyone had the chance to deal with this?
Many thanks in advance. Thank you very much,
Francesc

This is a weak spot in the native Cisco solution portfolio. I'll try to give one option but hopefully others will chime in with something more clever.
The MediaSense product can record trunk-side from Cisco CUBE which allows for device-agnostic recording; however, that only works if you're not concerned about internal calls to/from the analog phones (i.e. just to/from the PSTN). Getting the last part seems to require old fashioned SPAN recording to a capture server of a third party. This can get dicey though because most of the third-party recording vendors manually decipher the SCCP packets to figure out the calling/called party information. Be sure to ask them whether SCCP- or MGCP-controlled gateways are supported.
Please remember to rate helpful responses and identify helpful or correct answers.

No records for cube in production!

Similar Messages

Maybe you are looking for