No sound after using headphones to watch a netflix movie

I am looking for help to resolve my no sound issue. I can hear sound with headphones but not from computer speakers. Help????? I have tried going into itunes and using the headphones and unplugging them. I have gone to system preferences and I am getting a message that states the selected device has no output controls..... any ideas????

it's not software related the fact that it happened after ios7 is random
it's a hardware issue
read more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
read more here
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=UTF-8&oe=UTF-8

Similar Messages

Centro has no sound after using headphones

Hi, all. I used a 2.5 mm jack (radio shack adapter) so I could used my good quality headphones and listen to mp3 music. After removing this, my Centro had no volume when making calls and people on other end couldn't hear me either. The common fix for this (wiggling a pin inside the 2.5 mm female jack of the phone) did correct this. But I won't do this every time I want to listen to mp 3.
So, why did this happen? Is there a specific type of 2.5 mm jack, or is this a phone defect (ie: a pin inside the female end of the jack sticking)? Is this a common issue? Is there a permanent fix?
Post relates to: Centro (AT&T)

This issue has been reported on Treo model phones. It sounds like the microswitch in the headset jack is sticking.
What you have done is similar to the procedure supplied in the kb.palm.com article regarding the headset jack issue.
Here are the steps for trying to resolve the issue.
Plug and unplug: Try plugging and unplugging the headset to the smartphone a couple of times. The smartphone might mistakenly be under the impression that a headset is plugged into the phone, which would make it route audio to a nonexistent headset.
Clean the jack: If there is contamination or debris stuck in the audio jack, the speaker, microphone or headset may not work properly. Visually inspect the jack for debris that could block the connection. Try inserting and removing the handsfree headset a couple of times to see if it clears the debris from the device. You can blow into the jack or use gentle compressed air to clear debris. Note: Be cautious in using foreign objects to clear the jack. Like your ear canal, the headset jack is a delicate space that can be damaged if you clean it improperly.
Where's the trouble? If the steps above didn't help, you may need to contact Palm for further troubleshooting. An agent can walk you through a process to determine whether a particular component is failing, and whether the device needs repair.
I would suggest using a non-conductive electrical contact cleaner (you can find this in the electrical dept. at Home depot or hardware stores), spray it on plug of your headphones, insert and remove the plug several times to try and clean the jack.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/centro/centro/att/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Trying to use headphones to watch a show online... sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

trying to use headphones to watch a show online... sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

trying to do this on a macbook pro...please help

After using headphones for about an hour both my built-in speak and head phone stop working

After using headphones for about an hour both my built-in speak and head phone stop working, what could be wrong? I have checked system preferences and all appears ok there but still no sound

Your put your Air into sleep mode with headphones attached, I assume.
Upgrade to the latest OS to resolve that issue.
10.9.2 Apple icon upper left "software update"

HT1390 Does it use data to watch a rented movie from iTunes on IPad? Is it streaming or just downloaded?

Does it use data to watch a rented movie from iTunes on IPad? Is it streaming or just downloaded?

You must get the movie onto your iPad somehow. If you download it while on Wi-Fi you will not use cellular data. Once the movie has been downloaded you will not use cellular data or Wi-Fi.

HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
Michaelgfrommet

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Sound off after using Headphones- next Startup

After utilizing headphones and shutting down computer (w/ phones still plugged in) - the next time the E205 Satellite is started there is no sound. So is there a way to prevent this, other than obviously remembering to unplug the phones ! Machine seems to default to headphones. Thanks

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

The volume keys on my MacBook Pro stop working after using headphones.

The volume keys on my MacBook Pro recently stopped controling the volume after I've used headphones. I still have sound; I just can't make the volume increase or decrease. The mute, however, still works just fine. Because I have sound from the intenral speakers I know the computer doesn't think the headphones are still in the jack. A reboot fixes the problem, but as soon as I use headphones the problem starts up again. I want to fix this permanently.
I don't know if this helps but all the other keys (brightness, play/pause, etc) still work. I recently had to reset the PRAM because my computer refused to sleep when the lid was shut. I've checked system preferences and everything seems to be in order.
Can someone please help!?

I found this advice on another thread after encountering the same problem - I did the reboot and it worked fine and dandy!
I spoke with Applecare to fix my Macbook volume. Apparently there are pins inside the speaker/headphone jack that can get jammed. We fixed mine by doing some sort of reboot:
Turn off laptop.
Hold down the Option, Command, P, and R keys (all four at once, it's tricky!) and while holding down the four keys, turn on the computer. When you hear the second chime, release the four keys.
This re-set the sound toggle to internal speakers. Now I'm afraid to insert headphones again, but I assume this reboot will work over and over.

No sound after using Jensen iPad Dock

I used my new Jensen iPad dock with my iPhone 4S. After unplugging the iPhone it would no longer play music or allow text sounds when not connected to another device or though headphones. The volume control buttons on the side do not work properly, and the volume bar has completely disappeared from the music application. Also, when connected to a bluetooth device the options to choose music playback from the bluetooth device and iPhone speakers has changed. Instead if iPhone speakers it now says "Dock Connector". I know the iPad dock is the problem, but what is the solution?

had this a number of times to me even after using the charger it is dust or dirt in the charger plug of your phine or even in the earjack. depending on which you were using recently, use a photographes brush or i use an air ball for blowing the dust out do not blow in with your mouth the moisture corrodes things.
Essentially the dust gets pushed in there and the connectors think they are still connected, when using a dock especially if it hasnt been used for a while wipe the contact jack clean before using.

No sound after using isquint

I've had a lot of success using isquint converting movies to ipod. But I converted a VCD movie somone gave me and it worked fine. I played in quicktime with no problems after converting it to MP4. But once I transfer it to my ipod I get no sound after the first 10 seconds. Also one other problem. I have an mpg movie I converted over to mp4 in isquint but it toally distorted the orientation to a vertical format. any ideas?

it's not software related the fact that it happened after ios7 is random
it's a hardware issue
read more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
read more here
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=UTF-8&oe=UTF-8

Popping / clicking sound when using headphones

I just got a new iMac and I've noticed when using headphones I get this popping or clicking noise at cerain times. If the computer doesn't produce sound for a while, it's like the audio driver "shuts down" and the headphones go very quiet, then when the computer has to make a sound, it makes a "pop" noise before it loads the new sound (regardless of the file or program used). Then I'll leave it for a minute or so, and it "pops" and the headphones go very silent (there was a slight static noise before). I don't get this happening when running the headphones through a USB audio card. Is this normal behaviour for Mac OS?

Looks like this is a software issue (in part at least). By installing this simple script:
http://www.macupdate.com/info.php/id/29024/antipop
you can keep it from happening (more than once). The script keeps the audio system from shutting down, so you only get a pop on startup and that's it. I still don't know if this popping is normal behaviour or points to some faulty hardware.

Digital sound output only after using Headphones

i used my MacbookPro 17 2.66
with headphones to listen to music and after i removed headphones there is a red light in the headphone port and only digital sound output option in system preferences control panel
If i reinsert headphones, headphone output reappears
Where are my internal speaker option gone
i have a time machine backup
Can i just replace sound preferences
Thanks

Generally that means your headphones' plug is not exactly to dimensional stands and has jammed the internal connector in the jack to the "mute" position. The plug's tip-to-shoulder distance seems to be the variable.
I've found with my MBP that, with non-standard plugs, inserting them only until they function--not until the "stop shoulder" hits the MBP case--prevents this. I have an old and cheap set of external speakers whose plug works perfectly. A patch cable I use to connect to my desktop sound system has a non-standard plug, and I have to leave the plug slightly out of the jack to prevent the problem you see. Again, insert until you hear proper sound to the device, not by feel. I've no problems with the plugs falling out using this technique.
The "official" fix is a new logic board but most people are able to free the internal contact by inserting a plus into the jack and gently wiggling it in the horizontal plane. One person recently said he freed his with a wooden toothpick.
If you use anything other than a standard plug to manipulate the jack, be certain it's non-conductive. BTW, if you use the "Search Discussion" option in the upper right of this page and search for "red light" (use the quotes) you will see a number of threads here on the subject.

Satellite U400-11U - no sound when using headphone

Hi everybody .
i has get a Toshiba Satellite U400 (u400-11u) with Vista installed and at the first use all work nice and i have never tried the headphone, but after sometimes, when I put on the connecteur on the jack of headphone there is no sound, only when I put off the connecteur out of jack, the speaker work.
I has learn that I must update my BIOS and I doing it : no solution, there is no sound, so I have change to XP SP3 the some problem and now I'm with Windows 7 with the some problem.
So if you have any information about this problem, please give'it to me !!
I have tried all solution in FAQ, but no way !!
PS : sorry for language mistakes !!

Unfortunately I cannot offer you 100% working solution because I don't have exact the same notebook model but what I can say is that I think BIOS has nothing to with this issue.
It is very interesting that you have tested it with different operating systems and different headphones but the situation is always the same. What can be the problem?
At the end I believe this port is somehow defective. I have three different laptops here on the desk and hear internet radio almost all day. When I use my headset with all three laptops the reaction is always the same. Internal speakers will be disabled and I can hear music on my headset.
Maybe you should contact nearest authorized service provider and ask for help. Let them check the port.
One more thing: when you start notebook for the first time (factory settings) everything must works properly. If you have noticed this issue from that moment I really think there is a hardware problem.

No sound after using the ear phones

i was watching you tube video using the ear phone. when to to do something cam back no sound. with or without ear phones. i am not very technial so n idea what to do as i am in Fiji on holidays.

If there is a red light in the audio output port, insert the earphone plug a few time to see if you can trip the internal switch. If that fails, insert a cocktail stirrer or the like and jiggle inside in order to trip the switch. If that fails, go to a repair facility and have them trip the switch.
Ciao.

IPhone5 has no sound after using bluetooth speaker?!

I have an iPhone 5 16gb with iOS 8.1.1 that I used last night with my LuguLake Portable Bluetooth Speaker to listen to music. I've used this particular bluetooth speaker for about 3 months.
I turned the bluetooth speaker off, like I always do, but the sound did not return to my phone. It has not made any sound since last night before I used it with the speaker.
I tried restarting the phone twice, using it with the bluetooth speaker again (works fine), tried it with headphones (works fine), but otherwise it acts like the mute switch is on - and its not. I've even tried restoring the phone and it didn't make any noise, so I restored my backup, still no noise... What do I do?!!!!!
I have an otterbox case on my phone and do not recall dropping it recently. I never use the headphone port so it's not dirty but I cleaned it with a q-tip just for good measure. I don't know what else to try.
It seems like the phone won't disconnect from the bluetooth speaker even with bluetooth off.
Please help!

Hey fashionablewife,
Great troubleshooting! I know how frustrating it may be if an iPhone doesn’t operate as expected. But, it sounds like you have almost exhausted all of the troubleshooting steps outlined in the following resource. If so, you can follow the link at the end to contact Apple Support. Otherwise, definitely give the steps another go:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
http://support.apple.com/en-us/ts5180
Thanks,
Matt M.

No sound after using headphones to watch a netflix movie

Similar Messages

Maybe you are looking for