No specific exceptions in standard ExchangeFaultData message for any ES?

Hi,
I am trying to implement various enterprise services in ERP backend, but whenever a service return one or more exceptions, I always get an empty exception message. Eg:
<n0:ExchangeFaultData xmlns:n0="http://sap.com/xi/SRM/SE/Global" xmlns:prx="urn:sap.com:proxy:SRA:/1SAI/TAS570F727BD12E0D378A86:701:2008/06/06">
<standard>
  <faultText />
  </standard>
  </n0:ExchangeFaultData>
If I debug the method I can see that several exceptions are raised and specified in diverse structures, but for some reason these aren't converted into the standard fault message type for the ES. I suspect that I am missing some simple configuration.
Any suggestions?
Many thanks,
Emil

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

Similar Messages

  • How sent message for any manager in Nokia ????

    Hi All,
    I want sent message for any manager in Nokia , because of I facing a long suffering of Nokia .

    Everything depends on what you wish to speak to a manager about. If  you are having issues with the service provided by Nokia Care in your country, whether that is the Nokia Care contact centre or a Nokia retailer or Care Point, then the local contact centre can advise you how to deal with your issue. In some countries, the contact centres have a department specifically to help you resolve your issue; and in some countries there are separate numbers to call in order to deal with issues or complaints. If you have already been through this process and are not satisfied with the result, you can contact the head office of Nokia in your country or region.
    The link below takes you to a page where you can find lists of Nokia offices for all countries where Nokia has a presence:
    http://www.nokia.com/about-nokia/contacts/nokia-of​fices
    Be aware that "Manager" is a very loose term, Nokia is a huge multinational corporation with large numbers of staff in a variety of rôles, and therefore there are many different types of manager with responsibility for different areas of the business, so it is important that your concerns about Nokia Care are addressed to the right personnel, which is why you are best to start with the Nokia Care line for your country, they are the main point of contact for all customer queries. Be aware that a letter sent to the wrong place may take a long time to reach the right people, and therefore does not help your cause.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • Uncaught exception: Anyone seen this message? Any ideas?

    My Curve's Address book won't open -- I get this message:
    Uncaught exception:
    Application net_rim_bb_addressbook_app(143) is not responding; process terminated.
    Message Edited by lance_a_simon on 08-24-2008 06:19 PM
    Solved!
    Go to Solution.

    Usually this error is seen in a corrupted bookmark. Do you have any blank contacts?
    Try doing a batter reset poll the batter out with the device ON, leave out for about a minute, replace, and let the device reboot 1-3 min.
    See if problem returns,
    Please let me know!
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • No status messages for any components after 2012 SP1 upgrade

    Hi, after a recent upgrade to 2012 SP1 two of my sites no longer show any status messages in monitoring. All the services seem fine, I can distribute and deploy packages to clients, run queries etc.
    All other sites are now fine, the difference is the working sites are on 2008 R2 or 2012 and the trouble sites are on 2008 Storage Server SP1. So obviously close at hand to assume the Site Server OS is somehow the culprit.
    SP2 is installed on all sites for SQL Server 2008 R2, servers have been restarted.

    There we go!
    So sender.log had these:
    There is no existing connection, Win32 error = 7054
    and
    Error during connection to \\primaryserver.domain.local\SMS_SITE (7054).
    As mentioned already, I already verified the secondary site computer accounts were in the SMS_SiteToSiteConnection_XX1
    on the primary site server. But I added my main SCCM service account there as well and under Administration\Hierarchy Configuration\File Replication I changed the File Replication Account from the computer account to the service account and the status messages
    are now transfered and appearing in the Status Message Viewer.
    I don't really care why the computer account wouldn't work, I'm just going to leave it like this, the 2008 Storage Servers
    are due to be replaced or upgraded this year anyway.
    Thanks Juke and everyone else!

  • Outbound binding exception: No standard agreement found

    Hi ,
    I have 2 asynchronous FILE to IDOC scenarios. These scenario work fine most of the times but strangely some times it gives the error OUTBOUND_BINDING_NOT_FOUND (outbound binding exception: No standard agreement found for , <out_BS>, , <IN_BS>, <http://ns>, <Query_Out>)
    sxmb_moni shows that in the errored messages, the interface names in the sender and receiver side are same
    i.e. Outbound interface "Query_Out", but in the successful messages the interface name in the sender is "Query_Out" and in receiver is "FIDCC1_FIDCCP02".
    The Scenarios were working until today when i tested it again, no changes were made to it. Every other Scenario is working except these 2 interfaces housing the same logic.
    I have checked for errors in cache but none were there.
    Thanks in advance.
    Amith

    Hi Amith
    Check this link and find out where you have done mistake
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    Regards
    Dheeraj

  • Customised Error Message for ESS-MSS Applications

    Hello All,
    Currently, if there are any errors in the ESS/MSS transactions, we get the 503 error with lot of irrelevant data to the users. We have a basic html page which says, "There is a issue-Please contact XXXX".
    Is there a way to replace the standard error message with this html page ?
    PS: I am not talkign about the "Dispatcher Running" or "Application Stopped" messages, Please do not point me again to SAP Help website which doesn't answer my query. THIS IS ABOUT REPLACING THE STANDARD ERROR MESSAGES FOR ESS/MSS APPLICATIONS.
    Any help is much appreciated.
    We are on EP 7.01 SP3 (ESS 1.41)
    -Raj

    Hi Raj
    Let me clarify the difference between ESS and MSS errors and JAVA stack errors
    A "503 Service  not available" is not an ESS or MSS error - this is the thrown by the stack (possibly while navigating
    in ESS or MSS)
    The only information I have available in the case of java stack errors is to follow
    http://help.sap.com/saphelp_nw70/helpdata/en/9a/e74d426332bd30e10000000a155106/frameset.htm
    Whcih indicates how to customize stack errors  like 404 or 500
    Lastly you can also decide to hide the stack trace as per KBA 1596212
    To modify an ESS or MSS message this may require modification to front and back-end HCM application - usually
    ESS gets error information based on back-end errors example "fill in all required fields"
    Hope this helps

  • Standard form name for QM01 and QM02 ?

    Hi,
    Can someone tell me the standard form form name (print program) for transaction QM01 ?
    How do I find standard form name for any transaction ?
    Prompt replies will be awarded.
    Tushar.

    QM_NOTIF_OVERVW1

  • Solaris don't send message for domain on localmachine

    Hi,
    I have the following problem in my solaris box.
    When I try send a message for any user in domain pointed to my server messages don't arrives. But if I try send for other server/location the messages are sent and user receive that.
    Any help is appreciate.
    I will use sendmail and all default configurations are in place. If any help or information please talk me.

    I don't believe you understand.  Maybe I didn't describe the problem correctly.  If I go into my photos, select a photo then click on the icon to forward the picture... I then select "message" add a recipient, then click send.  The screen disappears as to indicate the picture was sent.  The recipient does not receive the picture.  If I then go into messages, it does not show the picture as a sent message...  It is not being sent.  It only will send a picture if I am already I'm the messaging app and either take a new picture, or select existing.  My daughter updated to 7.1 today on her 4S and does not have this problem.

  • Error message for bookings

    We regularly update events on our booking page. If someone has registered previously for an event they get an error message for any subsequent events. How can we stop this from happening?

    Hi
    Can you describe a little more in depth this scenario? When exactly is the user getting an error?
    Kind Regards
    Alex

  • How to identify the system generated program for any standrd extraction?

    Hi all,
    How to identify the standard program generated for any extraction takes place. Is there any tcode to figure out the standard abap prgms for the datasource.
    for instance:
    for the data source : 2LIS_02_SCL what is the standard extractor program used.
    Thanks
    Pooja

    Hi hemanyt,
    i cant find the table RSTRAN active.
    Thanks
    Pooja

  • What things form part of header info for any tcode

    Hello,
    I would like to know what are the things which form part of standard SAP tcodes.
    <b>one i know is its description.</b>
    whatelse is part of standard header information for any SAP standard transaction
    regards

    Surpreet,
    Humm...maybe look at what is available in SE93? That's about all I can come up with at this time of the day...
    Can I ask why you need this info?
    Cheers,
    Pat.

  • Exception message for PrdOrd and Planned order

    Hi Gurus,
    It possible based on prdord and planned ord we need to get the Exception message information. It's there any standard transaction code or any sqvi report?
    Note:
    Exception Message:
    10 - Reschedule in
    20 - cancel
    05 - Opening date in the past
    26 - Excess in individual segment
    Please find this information in MD04 (single order). i am looking for same time multple orders with exception message report.
    Thanks and regards,
    Deethya.B

    Hi
    You can use MD06 with refrence to you plant and MRP Controllers. Also you can define your own traffic lights so that based on these you get your exception messages.
    Hope this helps,
    Regards,
    Ravi

  • How to show multiple messages for a single exception

    hi
    Please consider this example application created using JDeveloper 11.1.1.3.0
    at http://www.consideringred.com/files/oracle/2010/MultipleMessagesExceptionApp-v0.01.zip
    It has a class extending DCErrorHandlerImpl configured as ErrorHandlerClass in DataBindings.cpx .
    Running the page and entering a value starting with "err" will result in an exception being thrown and multiple messages shown.
    See the screencast at http://screencast.com/t/zOmEOzP4jmQ
    To get multiple messages for a single exception the MyDCErrorHandler class is implemented like
    public class MyDCErrorHandler
      extends DCErrorHandlerImpl
      public MyDCErrorHandler()
        super(true);
      @Override
      public void reportException(DCBindingContainer pDCBindingContainer,
        Exception pException)
        if (pException instanceof JboException)
          Throwable vCause = pException.getCause();
          if (vCause instanceof MyMultiMessageException)
            reportMyMultiMessageException(pDCBindingContainer,
              (MyMultiMessageException)vCause);
            return;
        super.reportException(pDCBindingContainer, pException);
      public void reportMyMultiMessageException(DCBindingContainer pDCBindingContainer,
        MyMultiMessageException pException)
        String vMessage = pException.getMessage();
        reportException(pDCBindingContainer, new Exception(vMessage));
        List<String> vMessages = pException.getMessages();
        for (String vOneMessage : vMessages)
          reportException(pDCBindingContainer, new Exception(vOneMessage));
    }I wonder if calling reportException() multiple times is really the way to go here?
    question:
    - (q1) What would be the preferred use of the DCErrorHandlerImpl API to show multiple messages for a single exception?
    many thanks
    Jan Vervecken

    fyi
    Looks like using MultipleMessagesExceptionApp-v0.01.zip in JDeveloper 11.1.1.2.0 (11.1.1.2.36.55.36) results in a different behaviour compared to when used in JDeveloper 11.1.1.3.0 (11.1.1.3.37.56.60)
    see http://www.consideringred.com/files/oracle/img/2010/MultipleMessages-111130versus111120.png
    When using JDeveloper 11.1.1.2.0 each exception seems to result in two messages where there is only one message (as intended/expected) per exception when using JDeveloper 11.1.1.3.0 .
    (Could be somehow related to the question in forum thread "multiple callbacks to DCErrorHandlerImpl".)
    But, question (q1) remains and is still about JDeveloper 11.1.1.3.0 .
    regards
    Jan

  • Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

  • MRP Type V1 - Does it create Exception Message for "Reschedule-in"?

    Hello Experts,
    We are using MRP Type V1 (Which has the Manual Re-Order Planning + External Requirements). However we are facing and issue with the Rescheduling part. Scenario is as following:
    Material ROP is - 5000
    Open Pur Ord is - 5000 (due in 01 June'09) based on the Std Lead time of the Material
    Stok on hand is - 0
    At this point a Sales Order is entered for 1000 pcs
    After MRP Run, we expect an Exception Message for the Purchase Order to have "Reschedule-in". But, instead, system creates a PReq for 1000 pcs and the required date is NOT the Sales Order required Date but based on the Std Lead Time of the Material.
    I have set the Material Lead time - 60 Days
    I have set the Reschedule horizon - 0 Days ( I even tried with different Days but NO use)
    However, when I change the MRP Type to PD, system generates a "Reschedule-in" Exception Message for the Purchase Order.
    How can I get the "Reschedule-in" Exception Message for the Purchase Order with the MRP Type V1?
    Thanks for your help in Advance!

    Anil,
    Reorder point/External MRP performs net requirements calculation (within replenishment lead time).  If the existing firmed supply elements minus the existing requirements bring the projected stock below ROP, it will propose an order that will bring the projected stock back to reorder point.  The proposal will generally come at replenishment lead time.
    In the normal business cycle, your sales order would confirm to lead time, and you now have a confirmed sales requirement at lead time, plus a new purchase req to bring the stock back to the reorder point.  The scenario you have described is working exactly as it is designed.  Consumption based MRP will not normally try to reschedule supply elements to match requirements inside of lead time.
    Rescheduling horizon generally is counted from the end of lead time.  It won't help you here.
    I guess if you insist on having a reschedule message, you could change your lead time to 0 days.  Not a wise move in my opinion.  You then have locked yourself in your choices of types of Sales order availability checks into one that ignores lead time.  You also have to find a way to let your buyers/planners know what the 'real' lead time is when they place their orders on the vendors.
    I don't know why you are using a consumption-based planning type (reorder point).  It sounds like your business requirements are that you actually need to be using a demand-type planning method (eg, your supply elements are driven by your demand, not by a reorder point/desired stock level).  If PD works the way you want, why aren't you using it?
    Regards,
    DB49

Maybe you are looking for