Noise adjustments not seen in develop mode, but in library mode

Hi all -
After trying my new copy of LR3, I'm noticing some discrepencies in the library, develop and exported modes. For example, the develop view doesn't show the noise reduction applied to the whole image, but the library mode does - to a degree. The exported image in Photoshop looks somewhere between the library mode and the develp preview. Any reason why? I'd like to get a consistent view which represents the actual changes.

Thank you. However, is there a reason why the libray view shows the applied noise reducton on the whole image preview bu develop does not? While
I do use the 100% box, I'd also like to see how the entire image will look once the noise is applied. Also, for whatever reason the NR looks different in Photoshop somehwere between the library full preview and the develop full preview.
I feel that these sorts of things are far more important than Facebook and Flicker features.

Similar Messages

Bangla font is not seen appropriately in firefox, but bangla font is seen in safari

In my computer Bangla font is not seen appropriately in firefox, but bangla font is seen in safari. It is also noted that bangla font is available in my computer.

I get a 500 error and the source code (right-click "View source code") show an incomplete HTML code.
I've tried Firefox and wget (a command line tool to retrieve web pages and files). Both lead to 500 server error.
For some reason, Chrome doesn't shows any error, but it seems that there's some configuration in your web server or in Wordpress.

Noise reduction not showing in develop module

I have noticed today that when I am reducing the noise in the develop module, the changes are not being represented on the image I am working with, except in the top left hand corner... too small for me to see clearly. But when I switch to Library module, the changes have indeed taken place. Has anyone experienced this? I need a fix because it's a bad guessing game adjusting my slider without seeing results until I switch modules. Haven't had this problem before. A lot of my work is turning out tooooo smooth!! I appreciate any help I can get with this.

Without question noise reduction and sharpening should only be adjusted at 100% view magnification. Hopefully the OP understands why now.
I tried viewing both 21Mp and 6Mp RAW images at 'Fit' magnification in the Develop module on my office system:
Vista Home Premium SP2 64bit
Lightroom 3.4.1
1280 x 1024 Monitor (Calibrated with i1 Display 2)
The 'Fit' size image on my 1,280 x1024 display with side panels up is 650 x 430. I increased the side panels for a 400 x 266 picture size, and tried it with side panels off for a 1,000 x 666 picture size – Noise reduction and sharpening is clearly applied in the Develop module for all of three view magnification sizes!
I would be interested for others to try this and report what they are seeing. I used a High ISO 128,000 RAW image so I could easily see the affect of noise reduction and sharpening controls at the 'Fit' magnification. If you don't see any change, try moving the Sharpening Amount and Luminance controls to 100 and then down to 0.
Note to the OP – Regardless of what you are seeing at 'Fit' view size, only adjust Sharpening and Noise Reduction at 100%. I'm just suggesting that you may in fact have a problem with your system. What Camera and file type are you using, LR version, operating system, and monitor(s)?

Not really a development question but I need some help

I install Internet explorer 11 on my pc running windows 7x64 Ultimate, however once installed any site I go to that asks for a user name and password, when I click on the textbox I get NO cursor, if I press tab on my keyboard nothing happens, if I attempt
to highlight text on a page it does not select anything, does anyone know how to fix this issue, if I use enterprise mode all of the above issues do not happen but god its a headache to try to figure that enterprise mode out, I am only 17 and this is just a
home pc that I use for homework and gaming and I would like to have the html5 ability but when I cannot use internet explorer 11 for the above reasons then I am stuck down grading to Internet explorer 10... Please Help?

The IE user forum is at answers.microsoft.com. If you get directed here, the direction is wrong.
Web developers expect customers's browsers to be in working condition and there is no malware hijacking their web sites. It is like TV show producers expecting viewers to have a working TV.
Visual C++ MVP

AirPort Express not seen by wifi devices, but router wired devices OK

Hi,
I purchased an AirPort Express yesterday, upgraded the firmware to 7.6.1, connected to my Netgear DG834G router as a wireless client ("Join an existing network"), plugged into stereo and iTunes on my MacPro had no problems using AirPlay.
Today I tried using the AirPort Utility on my iPad and my wife's MacBook (as well as iTunes), but neither of them can see the AX via WiFi. But my MacPro is wired into the router and can see it OK. Likewise if I connect the MacBook to the router it can see the AX fine.
On a more technical note the wired devices can ping the AX, but WiFi devices can't. I find that pretty strange as they're all on the same subnet.
I've tried several resets and reconfigs (even from the MacBook), but once the AX is set to talk to the router then the WiFi devices can't see it. And throughout all this the (wired) MacPro can use AirPlay with no problems.
Has anyone got any ideas on what's going on, I'm a bit stumped! Thanks in advance.
Cheers,
Jay

Problem solved. For some stupid reason I had switched on a setting on the Netgear called "Wireless Isolation", and you can probably guess what that does...
So it's all working now!

Airport extreme not seen by one macbook but not another

I just updated my firmware for my Airport extreme (version 7.4.1) and my macbook pro can see it just fine however my girlfriends macbook can't see it at all. We pick up all the same wi-fi connections except hers doesn't see my airport extreme connection anymore. Prior to the firmware update she could see it just fine but now it doesn't register for her at all. Any help would be appreciated.

use her computer and delete the original wireless set and re-establish the current set.

External hard drive not seen in disk utility but can be seen in system profiler

HI
i have a 500gb western digital my passport, its been working fine, since i have used it on a windows machine, i can no longer get it to be recognised in finder. The light is flashing on the side and i can see it under USB in sytem profiler. I cant see it in disk utility. i cant format as it has photos etc loaded
cheers

An update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce

WD Passport not mounted and not seen in Disk Utility, but something seen in Terminal

Hi,
I have a WD 1TB Passport external hard drive. THe light comes on and the disc spins, but I can't see the hard drive in disk utilitiy or anywhere else. I know that it connects. I saw a post about using terminal to mount using code, but it never found the drive. I opened Console and removed and then plugged in teh drive again and what it says is the following:
kernel:USBMSC identifier (non-unique): 0F06CB9C0F06CCCA 0x1058 0x0 0x1015, 3
I have no idea what this means. Please help me try to find my external drive again.
Thank you.

If you have another non WD enclosuer, swap into that one and see if it is now detected in Disk Utility.
Contact WD technical support for assistance.
Ciao.

CanoScan 9000F not seen by PSE 10 but is by PSE 8

PSE 8 has been installed on my I-Mac 27 OS 10.6.8 and working fine.
I upgraded to PSE 10. Both 8 and 10 are on the computer.
I intalled the CanoScan 9000F. It shows up under System / Print/Fax
Acrobat pro sees it with "create pdf from scanner".
PSE 8 sees it with Import
PSE 10 doesn't see the scanner under Import.
Suggestions?

In PSE 9 and 10 you must install the Adobe TWAIN driver to scan. Go to Applications>Adobe Photoshop Elements 10>Support Files>Optional Plug-Ins>ImportModules, and move TWAIN.plugin from there into Applications>Adobe Photoshop Elements 10>Support Files>Plug-Ins>Import Modules.

The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library C:Program Files/x86/itunes.dll.

I'd download the latest ITunes and I started it and it has this error message:
"The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library C:Program Files/x86/itunes.dll"
I reinstalled ITunes several times and it got the same message. Please help.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
I've not seen this message before, but it has the same pattern as those discussed in the first and third boxes, suggesting that you've got an outdated .dll file that needs replacing. You should find iTunes.dll in the iTunes folder in Program Files or Program Files (x86). Delete it and then repair iTunes from the control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Develop Mode 2nd Monitor not showing edit adjustments

I am using Lightroom 4.1 RC2 on a Windows 7 64 bit system with dual monitors. When I am in the develop mode and make edit adjustments on any setting the 2nd monitor does not update. If I move to another image then come back the image is updated but it does not work in real time. I have never had this problem before and it worked fine in Lightroom V4.0

It's a bug in LR4.1 RC2.
The workaround seems to be to increase the size of the Standard Preview setting (File Handling tab of the Catalog Settings)....go up at least one setting (e.g. if it's currently 1024 change it to 1440 or 1680). No need to recreate your previews, just increasing the setting seems to work in most cases.
You might also, without realising it, be suffering a fairly dramatic memory leak which is also stopped by changing the settings.
For a longer answer, see here:
http://www.lightroomforums.net/showthread.php?15591-Interesting-Problem-with-LR4-1-RC2

Develop Mode Auto Adjustments

Hello,
When I am loading RAW files in to LR, in the Develop mode they start off as a pretty flat image (as I shot them) but then LR slowly adjusts each photos as it loads which looks like it is bumping the saturation and contrast then lowering the exposure.
What are these auto adjustments and how can I turn them off? I would rather edit my images as shot in camera, not after LR makes its own adjustments without my help.

Ryan.Polei wrote:
This doesn't happen in Bridge
The difference: Lightroom is a raw editor, Bridge is not.
So, Bridge shows you what the camera did (if unedited raw file) instead of what it would look like with Lightroom edits. And Lightroom edits have to start somewhere, and that somewhere CAN'T be the same as the jpeg, or the same as another raw editing software (they use different settings, different software, different starting point..).
Don't get me wrong: I think Adobe should have better support for displaying embedded preview / sidecar jpegs (which is what Bridge does), and have an option to detect in camera profile setting and select a "nearest fit" Lightroom profile, but none of that will change the basic "deal" - different software, different settings, different starting point...
Note: this may seem odd to you now, but it's how all proprietary raw editors work, i.e. all those except the camera manufacturer's own (or those using the camera manufacturer's raw-rendering toolkit under the hood, instead of it's own), which emulates in-camera settings pretty-much exactly - no others can interpret a custom picture style, granted some may try to start with a somewhat closer look.
To review: all proprietary raw software does the same thing: interpret raw data according to invented algorithms and settings. That's what Lightroom software does, and that's what Capture NX2 does (and that's what your camera firmware does to come up with the jpegs), but they are different software, with different algorithms, which use different settings.
So your choices are:
* shoot jpeg
* use the camera manufacturer's software to process, or
* wean yourself from custom camera styles and learn to setup Lightroom processing instead.
PS - I recommend the later. Actually, you can use a plugin to somewhat translate camera settings to Lightroom settings, but I don't recommend doing it, because it tends to prolong your dependency on camera settings, rather than wean.
My advice? - Learn to use Lightroom (and get it set up optimally for your druthers) for post-production, and forget about camera settings whilst shooting (except for exposure and focusing etc., of course). Then, delete all the custom profiles you created in your camera, for therapeutic purposes .
Rob

Partner functions for a specific customer not seen in XD03 but appears in XD02

Hello SAP Gurus,
I have a situation where a partner functions for a specific customer not seen in XD03 but appears in XD02, In XD03 only one partner function (Ship to) appears but in XD02 (Sold to, Ship to, Bill to and payer appears), from the customer master I can see that account group for this customer has been changes to Sold to (Z001) from Ship to (Z002).
I checked in settings for OB20 transaction for display customer centrally, it is in Display mode as required and not suprresed would like your inputs as to why this is happening and what can be done to fix this.
Thanks and Regards
Mohammed Roshan

Hi ROshan,
Open customer master in XD02 sales view and save it then check in XD03 it should display the partner functions.
As you said the account group has been changed I think the records needs to be saved again.

Lightroom 4 Bug: can only see photos in Library mode, not develop mode

This may be related to other imported catalog bugs, but does not seem to be quite the same. In Lightroom 4, with an upgraded Lightroom 3 catalog:
1. Select a photo in Library mode.
2. Click on Develop to go to Develop mode
Screen shows "No photo selected". I cannot edit photos in Develop mode.
I can see and edit photos that are found in smart collections, but not photos that are simply in my collections from 2012, 2011, etc. folders

This happened to me, too, after importing a couple older LR3 catalogs (upgrading/consolidating). I could see the photo in Library module but when I pressed "D" (single photo selected) I was getting the "no photo selected" error message--for every photo I tried. I wasn't able to open any photos at all in the develop module. (These were photos that were fine before installing LR4 and upgrading.) Photos were from imported LR3 and LR4 Beta catalogs.
I restarted and everything seems ok--for now!
So if you come across this thread with this same issue, restart and see if that helps. (Before restarting LR I optimized as suggested above, which did nothing for the "no photo selected" issue. And this isn't related to the parent folder issue, I left my photos in the same place and didn't have more than 3k photos in any of the parent folders. I read in other threads that people had the issue again after importing other catalogs. I'm about to do that so I'll report back.

I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in li

I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in light room to print, even though I have the chosen file up in the developing mode, it will instead print the most recent file that I added to lightroom. If found a way to work around these problems, (check make this the copy in the soft proofing, and copy my settings and delete and reload the old files) but it's a slight hassle and it didn't use to do this. Not sure why it changed. Could I have accidentally changed a setting?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Noise adjustments not seen in develop mode, but in library mode

Similar Messages

Maybe you are looking for