Nokia 3710 No international network access

Hello,
I have a Nokia 3710 that has Quad Band, GSM, UMTS.
I am travelling at the moment in Eastern Europe and my network coverage is not working. What are the settings I have to modify for my phone to pick up a coverage. I have tried manually searching and found networks but every time I select one it gives me the message no network coverage.
It is weird as I had the 6131 phone while travelling in the US and Canada and that phone had no problem picking up a network in those countries. I still have the same operator as I did while travelling in the US so I doubt is an operator probelm. My operator is Orange.

Connecting to other networks is controlled by the SIM, not the phone. Note that the phone can 'see' the other networks. So I suspect it was an issue with Orange, e.g. no partners in those countries, SIM not authorized for roaming in those countries, etc.

Similar Messages

WRV200 - Problems with VPN Client and Internal network access

I have a WRV200 router and want to access the internal (Private Network) connected on the inside. I have successfully conected to the router with the Linksys VPN Client, but it does not appear to allow access to the internal network.
How do I enable NAT Transversal or Passthru? I have already selected all of the PPTP, L2TP and IPSEC Pass Through.
Has anyone gotten this to work?

I have actually gotten this to work. Issues surround this include the ability to get to the VPN if the main DNS is down (it does not fail over to the next DNS in the list).
If you unselect all of the boxes in the firewall General configuration, you can connect, but if you need to have all of this unchecked, what's the sense of having it?
Anyway, you can use the DoS Prevention, this is not interfering.
HTH.

Nokia 3710 fold won't access Telstra messagebank v...

Nokia 3710 fold won't recognise Telstra 101 Voicemail - thinks it's an invalid number and thus attempts an emergency call - however #101# works by having voicemail call you back - not sure if this costs extra though. Telstra know nothing of this problem. Never happened with any other phones I have owned. Any help - same experience??

Thanks - you're a legend - I got mine from overseas too - now it's perfect.

Vpn client can access internet but cannot access internal network

I am using PIX 501 to setup a VPN. At first the VPN client cannot access the internet once they logged in via the Cisco system vpn client, so i enable split tunneling. Now the VPN client can access the internet but they can't access the internal network.Due to the limited characters can be posted here, only necessary IOS coding is posted on the next message. Who knows how to solve this problem? Pls Help.....

enable password ********** encrypted
passwd ********** encrypted
hostname Firewall
domain-name aqswdefrgt.com.sg
access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list nat permit tcp any host 65.165.123.142 eq smtp
access-list nat permit tcp any host 65.165.123.142 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq smtp
access-list nat permit tcp any host 65.165.123.143 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq www
access-list nat permit tcp any host 65.165.123.152 eq smtp
access-list nat permit tcp any host 65.165.123.152 eq pop3
access-list nat permit tcp any host 65.165.123.152 eq www
access-list nat permit tcp any host 65.165.123.143 eq https
access-list nat permit icmp any any
ip address outside 65.165.123.4 255.255.255.240
ip address inside 192.168.1.2 255.255.255.0
ip verify reverse-path interface outside
ip local pool clientpool 192.168.50.1-192.168.50.50
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 65.165.123.142 smtp 192.168.1.56 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.142 pop3 192.168.1.56 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 smtp 192.168.1.55 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 pop3 192.168.1.55 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 www 192.168.1.55 www netmask 255.255.255
.255 0 0
static (inside,outside) tcp 65.165.123.152 smtp 192.168.1.76 smtp netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 pop3 192.168.1.76 pop3 netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 www 192.168.1.76 www netmask 255.255.25
5.255 0 0
static (inside,outside) tcp 65.165.123.143 https 192.168.1.55 https netmask 255.255
.255.255 0 0
access-group nat in interface outside
route outside 0.0.0.0 0.0.0.0 65.165.123.1 1
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server plexus protocol radius
aaa-server plexus (inside) host 192.168.1.55 ******** timeout 5
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map client authentication plexus
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup vpn3000 address-pool clientpool
vpngroup vpn3000 dns-server 192.168.1.55
vpngroup vpn3000 wins-server 192.168.1.55
vpngroup vpn3000 default-domain aqswdefrgt.com.sg
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80

Cisco ASA 5505 L2TP VPN cannot access internal network

Hi,
I'm trying to configure Cisco L2TP VPN to my office. After successful connection I cannot access to internal network.
Can you jhelp me to find out the issue?
I have Cisco ASA:
inside network - 192.168.1.0
VPN network - 192.168.168.0
I have router 192.168.1.2 and I cannot ping or get access to this router.
Here is my config:
ASA Version 8.4(3)
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 198.X.X.A 255.255.255.248
ftp mode passive
same-security-traffic permit intra-interface
object network net-all
subnet 0.0.0.0 0.0.0.0
object network vpn_local
subnet 192.168.168.0 255.255.255.0
object network inside_nw
subnet 192.168.1.0 255.255.255.0
access-list outside_access_in extended permit icmp any any echo-reply
access-list outside_access_in extended deny ip any any log
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool sales_addresses 192.168.168.1-192.168.168.254
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source dynamic net-all interface
nat (inside,outside) source static inside_nw inside_nw destination static vpn_local vpn_local
nat (outside,inside) source static vpn_local vpn_local destination static inside_nw inside_nw route-lookup
object network vpn_local
nat (outside,outside) dynamic interface
object network inside_nw
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 198.X.X.B 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set my-transform-set-ikev1 mode transport
crypto dynamic-map dyno 10 set ikev1 transform-set my-transform-set-ikev1
crypto map vpn 20 ipsec-isakmp dynamic dyno
crypto map vpn interface outside
crypto isakmp nat-traversal 3600
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 30
console timeout 0
management-access inside
dhcpd address 192.168.1.5-192.168.1.132 inside
dhcpd dns 75.75.75.75 76.76.76.76 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy sales_policy internal
group-policy sales_policy attributes
dns-server value 75.75.75.75 76.76.76.76
vpn-tunnel-protocol l2tp-ipsec
username ----------
username ----------
tunnel-group DefaultRAGroup general-attributes
address-pool sales_addresses
default-group-policy sales_policy
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13
: end
Thanks for your help.

You have to test it with "real" traffic to 192.168.1.2 and if you use ping, you have to add icmp-inspection:
policy-map global_policy
class inspection_default
inspect icmp
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Can't access internal network from VPN using PIX 506E

Hello,
I seem to be having an issue with my PIX configuration. I can ping the VPN client from the the internal network, but can cannot access any resources from the vpn client. My running configuration is as follows:
Building configuration...
: Saved
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password N/JZnmeC2l5j3YTN encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname SwantonFw2
domain-name *****.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list outside_access_in permit icmp any any
access-list allow_ping permit icmp any any echo-reply
access-list allow_ping permit icmp any any unreachable
access-list allow_ping permit icmp any any time-exceeded
access-list INSIDE-IN permit tcp interface inside interface outside
access-list INSIDE-IN permit udp any any eq domain
access-list INSIDE-IN permit tcp any any eq www
access-list INSIDE-IN permit tcp any any eq ftp
access-list INSIDE-IN permit icmp any any echo
access-list INSIDE-IN permit tcp any any eq https
access-list inside_outbound_nat0_acl permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
access-list swanton_splitTunnelAcl permit ip any any
access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
no pager
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.150 255.255.255.0
ip address inside 192.168.0.35 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool VPN_Pool 192.168.240.1-192.168.240.254
pdm location 0.0.0.0 255.255.255.0 outside
pdm location 192.168.1.26 255.255.255.255 outside
pdm location 192.168.240.0 255.255.255.0 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 192.168.0.0 255.255.255.0 0 0
access-group outside_access_in in interface outside
access-group INSIDE-IN in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map client authentication LOCAL
crypto map outside_map interface outside
isakmp enable outside
isakmp identity address
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup swanton address-pool VPN_Pool
vpngroup swanton dns-server 192.168.1.1
vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton idle-time 1800
vpngroup swanton password ********
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.0.36-192.168.0.254 inside
dhcpd dns 8.8.8.8 8.8.4.4
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
username scott password hwDnqhIenLiwIr9B encrypted privilege 15
username norm password ET3skotcnISwb3MV encrypted privilege 2
username tarmbrecht password Zre8euXN6HxXaSdE encrypted privilege 2
username jlillevik password 9JMTvNZm3dLhQM/W encrypted privilege 2
username ruralogic password 49ikl05C8VE6k1jG encrypted privilege 15
username bzeiter password 1XjpdpkwnSENzfQ0 encrypted privilege 2
username mwalla password l5frk9obrNMGOiOD encrypted privilege 2
username heavyfab1 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab3 password 6.yy0ys7BifWsa9k encrypted privilege 2
username heavyfab2 password 6.yy0ys7BifWsa9k encrypted privilege 2
username djet password wj13fSF4BPQzUzB8 encrypted privilege 2
username cmorgan password y/NeUfNKehh/Vzj6 encrypted privilege 2
username cmayfield password Pe/felGx7VQ3I7ls encrypted privilege 2
username jeffg password zQEQceRITRrO4wJa encrypted privilege 2
terminal width 80
Cryptochecksum:9005f35a85fa5fe31dab579bbb1428c8
: end
[OK]
Any help will be greatly appreciated

Bj,
Are you trying to access network resources behind the inside interface?
ip address inside 192.168.0.35 255.255.255.0
If so, please make the following changes:
1- access-list SWANTON_VPN_SPLIT permit ip 192.168.0.0 255.255.255.0 192.168.240.0 255.255.255.0
2- no vpngroup swanton split-tunnel swanton_splitTunnelAcl
vpngroup swanton split-tunnel SWANTON_VPN_SPLIT
3- no access-list outside_cryptomap_dyn_20 permit ip any 192.168.240.0 255.255.255.0
4- isakmp nat-traversal 30
Let me know how it goes.
Portu.
Please rate any helpful posts

Unable to access internal networks over Remote acces VPN

Hi,
I have set up a Remote access VPN from Home to Cisco ASA 5512-X.
I am able to connect successfully and even getting a valid IP address from VPN pool 172.21.3.1-. However I am unable to access any of the internal resources.
Internal Network: 172.20.0.0 255.255.0.0
Please if someone can help identifying the issue.
Below is the running config:-
Result of the command: "sh run"
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name M8fl.com
enable password Aoz9GlxLLvkWrTUy encrypted
passwd Gc1jA6zbgOsj63RW encrypted
names
ip local pool vpnclients 172.21.3.1-172.21.3.20 mask 255.255.0.0
ip local pool test 172.21.3.21-172.21.3.40 mask 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 172.20.254.250 255.255.0.0
interface GigabitEthernet0/2
description vodafone 100mb internet 195.11.180.40_29
speed 100
duplex full
nameif outside1
security-level 1
ip address 195.11.180.42 255.255.255.248
interface GigabitEthernet0/3
description Voice
nameif Voice
security-level 80
ip address 192.168.2.1 255.255.255.252
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
boot system disk0:/asa911-smp-k8.bin
ftp mode passive
clock timezone GMT 0
dns domain-lookup inside
dns domain-lookup outside1
dns domain-lookup management
dns server-group DefaultDNS
name-server 10.0.0.4
name-server 172.20.0.100
domain-name M8fl.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network VLAN1
subnet 172.20.0.0 255.255.0.0
object network NETWORK_OBJ_172.20.3.0_27
subnet 172.21.3.0 255.255.255.224
object network Voice_Net
subnet 172.21.20.0 255.255.255.0
object network PBX_Internal
host 192.168.2.2
description PBX Internal
object network Voice_External
host 195.11.180.43
description For PBX
object network Raith_Remote_Network
subnet 192.168.20.0 255.255.255.0
description Raith Remote Network
object network NETWORK_OBJ_172.21.3.0_27
subnet 172.21.3.0 255.255.255.224
object network NETWORK_OBJ_172.21.3.0_26
subnet 172.21.3.0 255.255.255.192
object-group network azure-networks
network-object 10.0.0.0 255.0.0.0
object-group network onprem-networks
network-object 172.20.0.0 255.255.0.0
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service test_PPTP
service-object ip
service-object tcp destination eq pptp
access-list azure-vpn-acl extended permit ip object-group onprem-networks object-group azure-networks
access-list outside_access_in extended permit ip object-group azure-networks object-group onprem-networks
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit ip any any
access-list inside_access_in extended permit ip any any log disable
access-list inside_access_in_1 extended permit ip object-group onprem-networks object-group azure-networks
access-list inside_access_in_1 extended permit ip any object Voice_Net log debugging
access-list inside_access_in_1 extended permit ip any any
access-list outside_access_in_1 extended permit ip object-group azure-networks object-group onprem-networks
access-list outside_access_in_1 extended permit icmp any any
access-list outside_access_in_1 extended permit ip any any inactive
access-list Voice_access_in extended permit ip any any log debugging
access-list outside_cryptomap extended permit ip object-group onprem-networks object Raith_Remote_Network
pager lines 24
logging enable
logging buffer-size 40000
logging buffered notifications
logging asdm debugging
mtu outside 1500
mtu inside 1500
mtu outside1 1500
mtu Voice 1500
mtu management 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-66114.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside1) source static onprem-networks onprem-networks destination static azure-networks azure-networks
nat (inside,outside1) source dynamic VLAN1 interface
nat (inside,Voice) source static VLAN1 VLAN1 destination static Voice_Net Voice_Net no-proxy-arp route-lookup
nat (Voice,outside1) source static PBX_Internal Voice_External
nat (inside,outside) source static onprem-networks onprem-networks destination static Raith_Remote_Network Raith_Remote_Network no-proxy-arp route-lookup
nat (inside,outside1) source static any any destination static NETWORK_OBJ_172.21.3.0_27 NETWORK_OBJ_172.21.3.0_27 no-proxy-arp route-lookup
nat (inside,outside1) source static any any destination static NETWORK_OBJ_172.21.3.0_26 NETWORK_OBJ_172.21.3.0_26 no-proxy-arp route-lookup
access-group outside_access_in in interface outside
access-group inside_access_in_1 in interface inside
access-group outside_access_in_1 in interface outside1
access-group Voice_access_in in interface Voice
route outside1 0.0.0.0 0.0.0.0 195.11.180.41 10
route inside 172.21.20.0 255.255.255.0 172.20.20.253 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable 444
http 192.168.1.0 255.255.255.0 management
http 172.20.0.0 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
sysopt connection tcpmss 1350
sysopt noproxyarp outside
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set azure-ipsec-proposal-set esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA mode transport
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association lifetime seconds 3600
crypto ipsec security-association lifetime kilobytes 102400000
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-3DES-SHA
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime seconds 28800
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set security-association lifetime kilobytes 4608000
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment terminal
subject-name CN=ASA
crl configure
crypto ca trustpool policy
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 28800
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 enable outside1
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 28800
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 172.20.0.0 255.255.0.0 inside
telnet timeout 5
ssh 172.20.0.0 255.255.0.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd address 172.20.2.1-172.20.2.254 inside
dhcpd dns 10.0.0.4 172.20.0.100 interface inside
dhcpd enable inside
dhcpd dns 172.21.20.254 interface Voice
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
tftp-server inside 172.20.2.34 /tftp
webvpn
enable outside1
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3
anyconnect enable
tunnel-group-list enable
internal-password enable
group-policy DefaultRAGroup_2 internal
group-policy DefaultRAGroup_2 attributes
dns-server value 10.0.0.4 172.20.0.100
vpn-tunnel-protocol l2tp-ipsec
default-domain value
group-policy DefaultRAGroup_3 internal
group-policy DefaultRAGroup_3 attributes
dns-server value 10.0.0.4 172.20.0.100
vpn-tunnel-protocol ikev1 l2tp-ipsec
default-domain value
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
dns-server value 10.0.0.4 172.20.0.100
vpn-tunnel-protocol l2tp-ipsec
default-domain value
group-policy DefaultRAGroup_1 internal
group-policy DefaultRAGroup_1 attributes
dns-server value 10.0.0.4 172.20.0.100
vpn-tunnel-protocol l2tp-ipsec
default-domain value
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client ssl-clientless
group-policy RA_VPN internal
group-policy RA_VPN attributes
dns-server value 8.8.8.8 4.2.2.2
vpn-tunnel-protocol ikev1
default-domain value
group-policy "GroupPolicy_Anyconnect _profile" internal
group-policy "GroupPolicy_Anyconnect _profile" attributes
wins-server none
dns-server value 8.8.8.8
vpn-tunnel-protocol ssl-client ssl-clientless
default-domain none
webvpn
file-browsing enable
group-policy GroupPolicy_89.241.208.14 internal
group-policy GroupPolicy_89.241.208.14 attributes
vpn-tunnel-protocol ikev1
username test2 password encrypted privilege 15
username test1 password nt-encrypted privilege 0
username test1 attributes
vpn-group-policy DefaultRAGroup_2
username test password encrypted privilege 15
username test attributes
vpn-group-policy DefaultRAGroup_1
username EdwardM password encrypted privilege 15
username vpntest password encrypted privilege 0
username vpntest attributes
vpn-group-policy RA_VPN
username vpntest3 password nt-encrypted privilege 15
username vpntest3 attributes
service-type remote-access
username rhunton password encrypted privilege 15
username rhunton attributes
service-type admin
username e.melaugh password encrypted privilege 15
username netx password encrypted privilege 15
username netx attributes
service-type remote-access
username colin password encrypted privilege 15
username colin attributes
service-type remote-access
tunnel-group DefaultL2LGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup general-attributes
address-pool vpnclients
default-group-policy DefaultRAGroup_3
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
isakmp keepalive disable
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
authentication ms-chap-v2
tunnel-group "Anyconnect _profile" type remote-access
tunnel-group "Anyconnect _profile" general-attributes
address-pool vpnclients
default-group-policy "GroupPolicy_Anyconnect _profile"
tunnel-group "Anyconnect _profile" webvpn-attributes
group-alias "Anyconnect _profile" enable
tunnel-group 137.117.215.177 type ipsec-l2l
tunnel-group 137.117.215.177 ipsec-attributes
ikev1 pre-shared-key *****
peer-id-validate nocheck
isakmp keepalive disable
tunnel-group 89.241.208.14 type ipsec-l2l
tunnel-group 89.241.208.14 general-attributes
default-group-policy GroupPolicy_89.241.208.14
tunnel-group 89.241.208.14 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect pptp
policy-map type inspect ipsec-pass-thru Fairhurst
description to allow vpn to fairhurst network
parameters
esp
ah
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f4185106b309478da7804dc22d2c1a85
: end

Hi,
You seem to have this nat (inside,outside1) source dynamic VLAN1 interface at line 2 which is causing the identity Nat/ Nat exempt to fail.
It is always good to use the packet tracer feature on the ASA to see what exactly is happening.
Try this
nat (inside,outside1) 1 source static VLAN1 VLAN1 destination static NETWORK_OBJ_172.21.3.0_27 NETWORK_OBJ_172.21.3.0_27 no-pr route-lo
Let me know how it goes for you.
Regards,
Nitish Emmanuel

PIX 501 config - access to internal network not working from remote VPN users - everything on the inside is OK

One other thing - I had a problem with the key pairing so I rebuilt the rsa 1024 and the unit started working. Unfortunately I reloaded without the config in place and now I cannot get it to work again. Any help will be greatly apprecaited although I did review a dozen other posts of people having similar problems and for some reason there is never any conclusion as to the solution and I am not sure why.
Some other info from the client end:
I just ran the stats on the client and packets are being encrypted BUT none are decrypted.
Also Tunnel received 0 and sent 115119
Encryption is 168-bit 3-DES
Authentication is HMAC-SHA1
also even though the allow LAN is selected in the Cisco VPN client it states the local LAN is disabled in the client stats
also Transparent tunneling is selcted but in the stats it states it is inactive
I am connecting with the Cisco VPN Client Ver 5.0.07.0440
This config works. It is on the internal net 192.168..40.x and all users obtain dhcp and surf the web. It has required ports opened.The problem is that you can connect remotely via the VPN and you receive an IP address from the remote-vpn pool but you cannot see any machines on the internal network. The pix is at 40.2 and you cannot ping the pix and the pix from the remote PC connecting via the VPN and youcannot ping the remote PC from the PIX console when the remote is connected and receives the first IP address in the VPN pool of 192.168.40.25
I need to see the internal network and map network drives. I have another friend that is running the same config and it works but his computer is on a linksys wireless and has an IP of 192.168.1.x and the IP he receives from the VPN pool is 192.168.1.25 so I do not know if the same network is allowing this config to work even if there is an error in the config. In my present case I obtain the ip of 192.168.40.25 from the VPN pool and my connecting pc on 192.168.1.x I really am not sure how the VPN virtual adapter works. I am assuming it routes all traffic from your connecting PC to and from the virtual adapater but I really do not know for sure.
Other people have had similar issues with accessing the internal network from the VPN. One solution was the split-tunnel, another was the natting and another had to do with the encrption where there and an issue with the encrypt and ecrypt which was stopping the communicaton via the VPN.
I still cannot seem to find the issue with this config and any help will be greatly appreciated.
This is the config
interface ethernet0 100full
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password somepassword
hostname hostname
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
object-group network internal_trusted_net
network-object 192.168.40.0 255.255.255.0
object-group icmp-type icmp_outside
icmp-object echo-reply
icmp-object unreachable
icmp-object time-exceeded
icmp-object source-quench
access-list OutToIn permit icmp any xxx.xxx.xxx.0 255.255.255.248 object-group icmp_outside
access-list no_nat_inside permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list split_tunnel permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list OutToIn permit ip any any
access-list outbound permit ip any any
(NOTE: I had many more entries in the access list but removed them. Even with the above two allowing everything it does not work)
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside xxx.xxx.xxx.xxx 255.255.255.248
ip address inside 192.168.40.2 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpn_client_pool 192.168.40.25-192.168.40.30
pdm history enable
arp timeout 14400
global (outside) 1 interface
I had this statement missing from the previous posted config but even with the nat (inside) 0 access-list no_nat_inside it still does not work.
nat (inside) 0 access-list no_nat_inside
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group acl_outside_in in interface outside
access-group outbound in interface inside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.40.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community $XXXXXX$
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set 3des_strong esp-3des esp-sha-hmac
crypto dynamic-map clientmap 50 set transform-set 3des_strong
crypto map vpn 50 ipsec-isakmp dynamic clientmap
crypto map vpn client configuration address initiate
crypto map vpn client configuration address respond
crypto map vpn client authentication LOCAL
crypto map vpn interface outside
isakmp enable outside
isakmp identity address
isakmp client configuration address-pool local vpn_client_pool outside
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup remote-vpn split-tunnel split_tunnel
vpngroup remote-vpn idle-time 10800
vpngroup remote-vpn password ANOTHER PASSWORD
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.40.0 255.255.255.0 inside
ssh timeout 30
console timeout 60
dhcpd address 192.168.40.100-192.168.40.131 inside
dhcpd dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
username AUSER password PASSWORD privilege 15
terminal width 80
****************** End of config
I have been searching docs and other people's postings trying to obtain the info to make this work. It appears pretty much boiler plate but I believe my problem is in the natting. I am using a range in the internal network for the VPN pool and I have tried switching this to other networks but this has not helped. Unfortunately I have been unable to get the PDM to work and I believe this is a PC config thing and I did not want to waste the time on it. I read a post where a person using the PDM interface with the same problem (not being able to access the internal network) was able to go to a section in the VPN wizard and set the Address Exeption Translation. They said they originally set the VPN subnet when they did not have to. Many of the other blogs I read also stated that if the natting is not proper for the VPN pool- that it will not work but I am confused by the examples. They show as I do the complete range for an access-list called no_nat_inside but I believe it should only have the VPN pool IP range and not the entire network since the others do require natting - not sure if my thought process is correct here. Any help will be greatly apprecaited. Also this morning I just tried a boiler plate example from CISCO and it also did not do what I need for it to do. And I also connect a PC to obtain an IP to see if I can see it - no good. The PC can ping the PIX and viceversa but no one can ping the remote PC that connects via the CISCO Remote VPN client even though it receive an address from the vpnpool. Also include LAN is checked off on the client. This was mentioned in anther post.
Thank you once again.

Hi,
PIX501 is a very very old Cisco firewall that has not been sold for a long time to my understanding. It also doesnt support even close to new software levels.
If you wanted to replace the PIX501 the corresponding model nowadays would be ASA5505 which is the smallest Cisco ASA firewall with 8 switch port module. There is already a new ASA5500-X Series (while ASA5505 is of the original ASA 5500 Series) but they have not yet introduced a replacing model for this model nor have they stopped selling this unit. I have a couple of them at home. Though naturally they are more expensive than your usual consumer firewalls.
But if you wanted to replace your PIX firewall then I would probably suggest ASA5505. Naturally you could get some other models too but the cost naturally rises even more. I am not sure at what price these are sold as used.
I used some PIX501 firewalls at the start of my career but have not used them in ages since ASA5505 is pretty much the firewall model we use when we need a firewall/vpn device for a smaller network/branch site.
Here is a PDF of the original ASA5500 Series.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80285492.pdf
Here is a PDF of the new ASA5500-X Series
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/at_a_glance_c45-701635.pdf
I am afraid that its very hard for me atleast to troubleshoot this especially since I have not seen any outputs yet. Also the very old CLI and lack of GUI (?) make it harder to see what the problem is.
Could you provide the requested outputs?
From the PIX after connection test
show crypto ipsec sa
Screen captures of the VPN Client routing and statistics sections.
- Jouni

Provide the access to 3rd party in internal network? Needs some Design suggestions?

Hi Folks,
I have to provide the access to 3rd party in the internal network to repair their server...
How can we provide them the access? Needs some input as design perspective and working solution?
Thanks,
Regards,
MS

Well I would argue that if you distrust the remote user so much that you should seriously reconsider letting them work on equipment on your network at all.. Actually in that case, "watching" them during a remote desktop sharing session is actually a more secure solution as you can validate the actions they are taken are limited to those necessary to perform the tasks at hand. When I have had to work on systems in environments that were required to be secure to meet regulatory requirements, I was required to provide a step-by-step list of activities before hand and my performance of only those activities and verification of the expected outcome was done by staff of the client I was supporting.
If you want a purely network-based solution then put a temporary access list on the server's default gateway for the period during which the remote maintenance is ongoing allowing it to communicate only to/from the remote access VPN gateway.
A more sustainable setup would be to host the server in a DMZ on a private VLAN with an access list (or default setting) on the DMZ interface of the firewall that prohibits the server from initiating communication to the inside network.

Nokia 7370, No Network Access?

Hi, Wondering if anyone could help please? Just won a Nokia 7370 of Club Nokia a few week ago and it was working fine up to a few days ago. I am on O2 but all of a sudden i have no network access. My sim card is not at fault as it works in my old 5140i and I rang O2 but they said they couldn't have locked my phone. When I search for newtworks I pick up others except my home network but I am still not able to access these. Anyone have any ideas please? Is there a fault with the 7370? Thanks

hmmm... o2 locked a phone on me once, because they misread an email I sent - they thought it said I hadn't received it, when I actually said I had to go to the delivery office and collect it myself...
Anyway, try another o2 sim card in there and see if you can get on.
I'm jealous that you won it by the way - I've been entering those competitions and signing up to trial new handsets ever since they started doing it lol, never won yet
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Cannot access internal network after Tiger upgrade

I've just upgraded an eMac (1.25GHz, 768MB) from 10.3.9 to 10.4.6. Although I can get online, access Mail and all applications, I cannot access the internal network at all.
I've updated to 10.4.9, but still no luck. I've restarted, logged in as a different user, logged out and in again, removed the 'com.apple.networkconfig.plist' file from the 'Library/Preferences' folder, but still doesn't work.
I can see all the aliases to the other machines on the network in the sidebar, but clicking on them brings up a message "The alias xxxx could not be opened, because the original alias could not be found.".
Other machines can see this on on the network. File Sharing is turned on.
Any thoughts, I'm tearing my hair out a bit!
Powerbook G4 Mac OS X (10.4.8)

no good, is an afpmounter error, i solved it with an
Archive and Install
http://docs.info.apple.com/article.html?artnum=107120-en
maybe someone have a solution..
i think is an error during the update (i had the same from panther to tiger)
with A&I and half-hour, your machine work perfectly.

Cisco ASA 5505 Routing between internal networks

Hi,
I am new to Cisco ASA and have been configuring my new firewall but one thing have been bothering. I cannot get internal networks and routing between them to work as I would like to. Goal is to set four networks and control access with ACL:s between those.
1. Outside
2. DMZ
3. ServerNet1
4. Inside
ASA version is 9.1 and i have been reading on two different ways on handling IP routing with this. NAT Exempt and not configuring NAT at all and letting normal IP routing to handle internal networks. No matter how I configure, with or without NAT I cannot get access from inside network to DMZ or from ServerNet1 to DMZ. Strange thing is that I can access services from DMZ to Inside and ServerNet1 if access list allows it. For instance DNS server is on Inside network and DMZ works great using it.
Here is the running conf:
interface Ethernet0/0
switchport access vlan 20
interface Ethernet0/1
switchport access vlan 20
interface Ethernet0/2
switchport access vlan 19
interface Ethernet0/3
switchport access vlan 10
switchport trunk allowed vlan 10,19-20
switchport trunk native vlan 1
interface Ethernet0/4
switchport access vlan 10
interface Ethernet0/5
switchport access vlan 10
switchport trunk allowed vlan 10-11,19-20
switchport trunk native vlan 1
switchport mode trunk
interface Ethernet0/6
switchport access vlan 10
switchport trunk allowed vlan 10-11,19-20
switchport trunk native vlan 1
switchport mode trunk
interface Ethernet0/7
switchport access vlan 10
interface Vlan10
nameif inside
security-level 90
ip address 192.168.2.1 255.255.255.0
interface Vlan11
nameif ServerNet1
security-level 100
ip address 192.168.4.1 255.255.255.0
interface Vlan19
nameif DMZ
security-level 10
ip address 192.168.3.1 255.255.255.0
interface Vlan20
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
clock timezone EEST 2
clock summer-time EEDT recurring last Sun Mar 3:00 last Sun Oct 4:00
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-192.168.2.0
subnet 192.168.2.0 255.255.255.0
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network DNS
host 192.168.2.10
description DNS Liikenne
object network Srv2
host 192.168.2.10
description DC, DNS, DNCP
object network obj-192.168.4.0
subnet 192.168.4.0 255.255.255.0
object network ServerNet1
subnet 192.168.4.0 255.255.255.0
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network RFC1918
object-group network InternalNetworks
network-object 192.168.2.0 255.255.255.0
network-object 192.168.3.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object tcp destination eq domain
service-object udp destination eq domain
service-object udp destination eq nameserver
service-object udp destination eq ntp
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
port-object eq ftp
port-object eq ftp-data
object-group service rdp tcp-udp
description Microsoft RDP
port-object eq 3389
object-group service DM_INLINE_TCP_2 tcp
port-object eq ftp
port-object eq ftp-data
port-object eq www
port-object eq https
object-group service DM_INLINE_SERVICE_2
service-object tcp destination eq domain
service-object udp destination eq domain
object-group network DM_INLINE_NETWORK_1
network-object object obj-192.168.2.0
network-object object obj-192.168.4.0
access-list dmz_access_in extended permit ip object obj-192.168.3.0 object obj_any
access-list dmz_access_in extended deny ip any object-group InternalNetworks
access-list DMZ_access_in extended permit object-group TCPUDP object obj-192.168.3.0 object DNS eq domain
access-list DMZ_access_in extended permit object-group TCPUDP object obj-192.168.3.0 object-group DM_INLINE_NETWORK_1 object-group rdp
access-list DMZ_access_in extended deny ip any object-group InternalNetworks
access-list DMZ_access_in extended permit tcp object obj-192.168.3.0 object obj_any object-group DM_INLINE_TCP_2
access-list inside_access_in extended permit ip object obj-192.168.2.0 object-group InternalNetworks
access-list inside_access_in extended permit object-group TCPUDP object obj-192.168.2.0 object obj_any object-group rdp
access-list inside_access_in extended permit tcp object obj-192.168.2.0 object obj_any object-group DM_INLINE_TCP_1
access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_1 object Srv2 object obj_any
access-list inside_access_in extended permit object-group TCPUDP object obj-192.168.2.0 object obj-192.168.3.0 object-group rdp
access-list ServerNet1_access_in extended permit object-group DM_INLINE_SERVICE_2 any object DNS
access-list ServerNet1_access_in extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu ServerNet1 1500
mtu inside 1500
mtu DMZ 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-711-52.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,DMZ) source static obj-192.168.2.0 obj-192.168.2.0 destination static obj-192.168.2.0 obj-192.168.2.0 no-proxy-arp
object network obj_any
nat (inside,outside) dynamic interface
nat (DMZ,outside) after-auto source dynamic obj_any interface destination static obj_any obj_any
nat (ServerNet1,outside) after-auto source dynamic obj-192.168.4.0 interface
access-group ServerNet1_access_in in interface ServerNet1
access-group inside_access_in in interface inside
access-group DMZ_access_in in interface DMZ
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.2.0 255.255.255.0 inside
http 192.168.4.0 255.255.255.0 ServerNet1
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 192.168.4.0 255.255.255.0 ServerNet1
ssh 192.168.2.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous

Hi Jouni,
Yep, Finnish would be good also =)
In front of ASA is DSL modem, on the trunk ports is Hyper-V host that uses the trunk ports so that every VM has their VLAN ID defined in the VM level. Everything is working good on that end. Also there is WLAN Access Pois on one of the ASA ports, on the WLAN AP there is the management portal address on DMZ that i have been testing agains (192.168.3.4)
If i configure Dynamic PAT from inside to the DMZ then the traffic starts to work from inside to all hosts on DMZ but thats not the right way to do it so no shortcuts =)
Here is the conf now, still doesnt work:
interface Ethernet0/0
switchport access vlan 20
interface Ethernet0/1
switchport access vlan 20
interface Ethernet0/2
switchport access vlan 19
interface Ethernet0/3
switchport access vlan 10
switchport trunk allowed vlan 10,19-20
switchport trunk native vlan 1
interface Ethernet0/4
switchport access vlan 10
interface Ethernet0/5
switchport access vlan 10
switchport trunk allowed vlan 10-11,19-20
switchport trunk native vlan 1
switchport mode trunk
interface Ethernet0/6
switchport access vlan 10
switchport trunk allowed vlan 10-11,19-20
switchport trunk native vlan 1
switchport mode trunk
interface Ethernet0/7
switchport access vlan 10
interface Vlan10
nameif inside
security-level 90
ip address 192.168.2.1 255.255.255.0
interface Vlan11
nameif ServerNet1
security-level 100
ip address 192.168.4.1 255.255.255.0
interface Vlan19
nameif DMZ
security-level 10
ip address 192.168.3.1 255.255.255.0
interface Vlan20
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
clock timezone EEST 2
clock summer-time EEDT recurring last Sun Mar 3:00 last Sun Oct 4:00
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-192.168.2.0
subnet 192.168.2.0 255.255.255.0
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network DNS
host 192.168.2.10
description DNS Liikenne
object network Srv2
host 192.168.2.10
description DC, DNS, DNCP
object network obj-192.168.4.0
subnet 192.168.4.0 255.255.255.0
object network ServerNet1
subnet 192.168.4.0 255.255.255.0
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network RFC1918
object-group network InternalNetworks
network-object 192.168.2.0 255.255.255.0
network-object 192.168.3.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object tcp destination eq domain
service-object udp destination eq domain
service-object udp destination eq nameserver
service-object udp destination eq ntp
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
port-object eq ftp
port-object eq ftp-data
object-group service rdp tcp-udp
description Microsoft RDP
port-object eq 3389
object-group service DM_INLINE_TCP_2 tcp
port-object eq ftp
port-object eq ftp-data
port-object eq www
port-object eq https
object-group service DM_INLINE_SERVICE_2
service-object tcp destination eq domain
service-object udp destination eq domain
object-group network DM_INLINE_NETWORK_1
network-object object obj-192.168.2.0
network-object object obj-192.168.4.0
object-group network DEFAULT-PAT-SOURCE
description Default PAT source networks
network-object 192.168.2.0 255.255.255.0
network-object 192.168.3.0 255.255.255.0
network-object 192.168.4.0 255.255.255.0
access-list dmz_access_in extended permit ip object obj-192.168.3.0 object obj_any
access-list dmz_access_in extended deny ip any object-group InternalNetworks
access-list DMZ_access_in extended permit object-group TCPUDP object obj-192.168.3.0 object DNS eq domain
access-list DMZ_access_in extended permit object-group TCPUDP object obj-192.168.3.0 object-group DM_INLINE_NETWORK_1 object-group rdp
access-list DMZ_access_in extended deny ip any object-group InternalNetworks
access-list DMZ_access_in extended permit tcp object obj-192.168.3.0 object obj_any object-group DM_INLINE_TCP_2
access-list inside_access_in extended permit ip object obj-192.168.2.0 object-group InternalNetworks
access-list inside_access_in extended permit object-group TCPUDP object obj-192.168.2.0 object obj_any object-group rdp
access-list inside_access_in extended permit tcp object obj-192.168.2.0 object obj_any object-group DM_INLINE_TCP_1
access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_1 object Srv2 object obj_any
access-list inside_access_in extended permit object-group TCPUDP object obj-192.168.2.0 object obj-192.168.3.0 object-group rdp
access-list ServerNet1_access_in extended permit object-group DM_INLINE_SERVICE_2 any object DNS
access-list ServerNet1_access_in extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu ServerNet1 1500
mtu inside 1500
mtu DMZ 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-711-52.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (any,outside) after-auto source dynamic DEFAULT-PAT-SOURCE interface
access-group ServerNet1_access_in in interface ServerNet1
access-group inside_access_in in interface inside
access-group DMZ_access_in in interface DMZ
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.2.0 255.255.255.0 inside
http 192.168.4.0 255.255.255.0 ServerNet1
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 192.168.4.0 255.255.255.0 ServerNet1
ssh 192.168.2.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous

Is it possible that network access permission control in acs 5.1

Hello
We have ACS5.1, WLC 7.0 and using 802.1x to authentication users.
Anybody know how I can configure network access restriction with using internal user group information.
For example, under the same SSID(like that "test") , same VLAN ID.
But two different user group has a different network access permission.
One group has full permission and the other has a limit network access permission.
Is it possible?

The equivalent of a NAR would be ACS 5.1 returning an authorization profile after authentication. Just configure your authorization policy to return one profile for one group of user and the other profile for the others.
Now to restrict access to the network, I think you're best with an ACL ? So link ACLs to your profiles.
Nicolas

Using DNS Services on an internal network and still using an outside DNS

I have just started using Mac OSX Server for the first time and I am trying to set up an internal DNS server so I can set up an LDAP Directory master and replica. However, I am running into some problems in setting up the DNS server on our network.
This is where it gets a little confusing to me here and i have to explain some things. We have a shared web hosting ISP, which means that our mail services and web hosting services are not hosted on site. To access our mail services using a FQDN I would point Outlook to mail.xxx-xxx.net. However, I want to use that domain, xxx-xxx.net, as our internal network as well because it is the name of our company.
I can get all of the DNS names to propogate to their assigned IP's on the internal network and can ping everything using fully qualified domain names, but whenever I go to use services such as mail., it cannot find the server which is hosting that service because it is obviously not on our internal network. This makes sense that I cannot ping it, but how do I set up the alias mail.xxx-xxx.net to point to the ip address of the mail servers hosted by our ISP instead of something hosted on our internal network?
Sorry I can't clarify better, I'll try some cliff's instead;
1) Trying to set up internal dns server so I can use LDAP Directory Master and Replica Services.
2) The domain, xxx-xxx.net is currently being used for web hosting and mail services not hosted at our site.
3) Want to use the domain xxx-xxx.net as our internal domain because it is the name of our company, and eventually we will be hosting our own content.
4) Can set up internal DNS server and get all IP's to propagate just fine, but services such as mail.xxx-xxx.net cannot be used because they are not hosted on the internal network.
5) How do I set up DNS to point certain services to point to an external DNS servers, or to the IP address of the server itself so I don't have to use the ip address i.e. mail.216.256.33.24?

Ok I got it
Here's my walkthrough for all the other tormented souls, that might find this thread and require help:
Introduction:
Internet-card: ra0 192.168.16.64
Internet-gateway, nameserver 192.168.16.1
local-network-card eth1 192.168.15.1
[1] modprobe capabilty
-> /etc/rc.conf
[2] pacman -S
* dhcpd (DHCP daemon)
* bind (Berkeley Domain Name Server)
[3] vi /etc/dhcpd.conf
ddns-update-style ad-hoc;
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
default-lease-time 600;
max-lease-time 7200;
subnet 192.168.15.0 netmask 255.255.255.0
# --- default gateway
option routers 192.168.15.1;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.15.255;
option domain-name-servers 192.168.15.1;
range 192.168.15.2 192.168.15.254;
default-lease-time 21600;
max-lease-time 43200;
[4] vi /etc/named.conf
acl micro
192.168.15.0/24;
options {
directory "/var/named";
pid-file "/var/run/named/named.pid";
auth-nxdomain yes;
datasize default;
allow-query{ micro; };
allow-recursion { micro; };
[5]
/etc/rc.d/dhcpd start
/etc/rc.d/named start
-> rc.conf
[6] iptables
vi /etc/sysctl.conf
net.ipv4.ip_forward = 1
iptables -t nat -A POSTROUTING -o ra0 -j SNAT --to 192.168.16.64
iptables -A INPUT -j DROP -m state --state NEW,INVALID -i ippp0
iptables -A FORWARD -j DROP -m state --state NEW,INVALID -i ippp0
make it a script that is run in /etc/rc.local

VPN NO LONGER PROVIDES NETWORK ACCESS using SNOW LEOPARD (WORKED OK BEFORE)

I was using the Apple VPN tool to access my business network (via Leopard Server) without problem when using Leopard.
After upgrading both the server and laptops to Snow Leopard, I can successfully make a VPN connection to the server, but cannot access any of the devices on the network (printer, other computers, or NAS where my iTunes library resides).
Any suggestions would be appreciated.

Hi,
i had exactly the same issue, once i installed 10.6 the VPN would still connect, but alas i could not connect to the server internally or any other internal network devices. I solved it by disabling encryption on the VPN settings, it had 18 bit enabled by default, looks like 10.6 activates the encryption setting by default. So my advice is to ensure that if you do not have encryption enabled then make sure is is set to none in the VPN settings. Hoe this helps, like i said worked for me, but may not for you, give it a go and see what happens.
Cheers,
Gerry

Nokia 3710 No international network access

Similar Messages

Maybe you are looking for