Non Deduction of TDS in Case of Open Credit Line Items in GR/IR account

Dear Experts,
I would like to request you to please give ur suggestion/advise in the below issue:-
In our earlier legacy system(oracle) we used make provision entry based upon the activity done & certified by respective non finance dept by(against which vendor invoices are not received before month closing):-
On the last day of the month:-
Handling Exp    Dr
Ware House Exp Dr
Other many Exp  Dr
Current Liab & Prov A/c Cr
As per IT dept we have to deduct TDS at the time of crediting the vendor or any other suspense a/c and deposit it by next month by 7th day . To avoid non deduction of TDS against such provisional expenses we used to reverse the same entry on the 1st of next month:-
Current Liab & Prov A/c Dr
Handling Exp     Cr
Ware House Exp Cr
Other Exp           Cr
Now in SAP we r not doing manual entries like above:-
The entries are huge and so many Exp get debited & GR/IR A/c get credited. Thus there is a very much possibility that the IT person or IT Auditor treat it(GR/IR) as suspense a/c and can give comments on his report about non deduction/deposition of TDS.
In SAP there is an option to transfer all these credit open items into an clearing a/c and reverse it in the 1st of next month. But that time entry will be a sunder:-
On the last date of the month
GR/IR Account   Dr
C/L Prov Clearing A/c  Cr    (It will be created)
On the first date of the month
C/L Prov Clearing A/c  Dr
GR/IR Account           Cr
But again C/L Prov Clearing A/c can be interpreted as a supense A/c.
We need entries like under:-
On the last date of the month let all credit open item of GR/IR as it is.
On the first date of the next month all Credit Line items document to be reversed and again reposting of same on the same day.
I,e all Exp to be credited
     All GR/IR to be debited  
(Revarsal of all open GR/IR credit line items) on 1st of next month
On same day again the original entries which are reversed to be created
All Exp to be deited
All GR/Ir to be credited.
Whether above is possible, if not then how other companies in India are handling the issue.
Regards,
Alok

Dear ,
Try t-code J1INPR and J1INUT for the same as per below explanations.
Regards,
Kalpik

Similar Messages

  • Open AUC Line Items

    Hi
    My requirement is to upload the legacy open AUC line items into the new system. For this we are writing a ABAP program. I could find all the AUC line items in the Table ANEP. But my requirement is to extract only the open AUC line items and not all.
    Can any suggest the Table in which I could find the open AUC line items ?
    Requirement is critical and thank you in advance.
    Gemini

    My requirement is not to find whether the given AUC is deactivated or not. I would like to extract the line items which are open in all the AUCs for uploading this as cut over data into the new system.
    As I have mentioned in my question I could find all the line items (settled + not settled) of AUC in ANEP table, but I want to know  if there is any Table which stores only the unsettled AUC line items.
    Thank you
    Gemini

  • How to identify open schedule line item?

    Hi,
    I have a requirement for identifying open schedule line items. I want to identify any indicator or any field in any table which will tell me that the schedule line item is complete. Can anyone tell me how can I know that?
    Ex. Sales Order 1 has 3 materials (line items) in it A, B & C.
           For A the quantity is 10 and for which 3 schedule line have been created.
           Out of the 3 schedule lines, 1 schedule line item is complete that is the delivery has been done and the rest 2 are open.
    For B and C there are 4 & 5 schedule lines created and all are open.
    How can i identify that total 12 schedule line 1 is completed and 11 are open.
    Please suggest tables, field names / indicators.
    Regards,
    Vishal

    Hi Vishal,
    You can not identify the open line items directly, rather you have to calculate the delivered quantity and copmare it with the ordered qty for each line item. The ordered qty can be idenitfy from the table VBEP and the deliverd qty can be found out by calling the function RV_SCHEDULE_CHECK_DELIVERIES.
    Follow the link for more details to calculate the delvierd qty.
    http://scn.sap.com/thread/279862
    Rgards,
    Rutvik.

  • Open vendor line item conversion

    i have to upload "AP-open vendor line item data"  through LSMW
    Tcode:  FB01
    is their any direct function module /BAPI available?
    Thanks & Regards.
    Avijit Khajanchi.

    We have LSMW   Direct Input method
    Object               0100   Financial documents
    Method               0000
    Program Name         RFBIBL00
    Program Type         D   Direct Input

  • How to find the open po line item by using EKKO &EKPO tables

    Hi Gurus,
        what i am doing is finding out the OPEN PO line item from EKPO table. I know it has to check the ELIKZ field from the EKPO table.Can you please clarify me on the same in more detail.I has to use the ELIKZ  EREKZ fields from EKPO table.

    Use the field ELIKZ in EKPO. If the field is Blank its an OPEN PO Line Item
    refer this link.
    How to open PO line item

  • How to open PO line item

    how to find  out
    OPEN PO line item
    by  using EKKO & EKPO table

    Nilesh,
    Check this post
    Open PO's
    Reward if this helps,
    Satish

  • Standard object for open ar line items charge backs

    Hello there,
    can any body tell me whether any standard object exists for open AR line Items Charge Backs.
    Regards
    Janapathi

    Hi,
    As per my knowledge, there is no standard object available for AR neither for AP.
    Thanks & Regards,
    Sandip Kamdar

  • Error when posting Open AR Line Items

    hello iam posting Open AR Line Items for contract account using message type
    CTRACDOCUMENT_CREATE using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the problem.
    Regards
    priya

    Hi Priya,
    As you are using the Idoc method, is the Partner profile correctly defined.
    Please could you elaborate your error in a bit more detail.

  • Close Open PR Line Items

    Hi ,
    There is a PR with 2 line items.
    Line Item 1 qnty is 100
    Line Item 2 qnty is 25
    A PO has been created with reference to above PR
    For Line Item 1 qnty is 50
    For Line Item 2 qnty is 15
    GRN has been done for the above PO.
    Now it has been decided that no further processing will happen. ie No Goods receipt will happen.
    Now Open PR for
    Line Item 1 is 50
    Line Item 2 is 10
    Now I would like to Close this PR for both line items so that no further PO is made from this PR.
    Regards,
    Karthik

    Hi ,
    There is a PR with 2 line items.
    Line Item 1 qnty is 100
    Line Item 2 qnty is 25
    A PO has been created with reference to above PR
    For Line Item 1 qnty is 50
    For Line Item 2 qnty is 15
    GRN has been done for the above PO.
    Now it has been decided that no further processing will happen. ie No Goods receipt will happen.
    Now Open PR for
    Line Item 1 is 50
    Line Item 2 is 10
    Now I would like to Close this PR for both line items so that no further PO is made from this PR.
    As everyone suggested, in ME52N, quantities / Dates Tab and then tick Closed .
    The above steps  have already been tried, only after which i have posted the issue.
    The closed tick is deactivated.  
    Any other solution apart from the above solution is appreciated.
    Regards,
    Karthik

  • Clearing of open line items in Exchange Vendor account

    Hi Friends,
    We have an issue related with the clearing of open items from the exchange vendor account. Details of issue are as follows,
    We have two open line items in an exchange vendor account (T-code FBL1N) pertaining to the Logistics purchase invoice and a credit memo. These documents are very old documents posted in the year 2005. When user tries to clear or net these documents using T-code FB1K( using the current period), SAP generates the clearing document, i.e. it gives only a clearing document number and sends an email to user stating that update has been terminated. When we try to view the clearing document so generated using T-code FB03, system do not finds it, i.e. it is actually not in system / tables. Also most important thing these open items continues to appear in the vendor account, i.e. they are not getting cleared.
    Some of our observations about the related exchange Purchase Order is that, this PO has document date 03/31/2004 having qty. 5659 GA. The very first GR and related invoice is also having qty 5659 GA and posting date of 03/31/2004. After this user had again created above mentioned documents that are in question i.e. invoice and credit memo. These documents were posted on 04/12/2005 for the qty of 22592 GA (Even though the PO qty is 5659 GA).
    Now we would like to know what would be the probable reason for these open items not getting cleared from the vendor account. Please note user also tried to clear these documents using F-44 T-code but no luck.
    Thanks,
    Ritesh/Ninad

    Hi
    Have you tried by changing the Base line date while cleaing the vendor account. ?
    Satish

  • Deleting The Open STO Line Items...........

    Dear Friends,
    I am having one requirement as follows.
    The program is to build in such a fashion , that if there are any open items in STO
    ie. In one STO there are 3 items having 100 , 200 , 300 quantities...
    <b>First item</b>     10 .. quantity 100..... PGI Done for 100 ( balance Nill )
    <b>Second Item</b> 20... quantity 200..... PGI Done for 100 ( Open Deliv / Shipment ) -  (100 ).. Then system has to mark for deletion for ( open deliveries and  Shipment cost , Handling unit ).........
    <b>Third item</b> 30  -
      quantity 300...( Open Deliveries 300 ) ..Then system has to mark for deletion  for ( open deliveries , and PO line item  )
    How we can approach to this solution...
    Is there anyBAPI available or LSMW for each phase we have to consider or BDC..
    Thanx and Regards,
    Amitav

    Hi Rajesh,
    I think SAP help says that the period for which you are planning to delete or archive data may have to be locked.
    Check the following links:
    For Archiving
    http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e55ec462a11d189000000e8323d3a/frameset.htm

  • TDS Provision - J1INPR - Profit Center in line item 0001 not defined

    HI SAP GURUS,
    When I am running j1inpr,  error of profit center not defined for line item 0001 is coming. Please help me to resolve the issue
    CHEERS

    Since you are on New GL, Pls use T Code FAGL3KEH to define a default profit center or use substitution rule to derive profit center based on Business Place & Section Code.
    Regards
    Sanil Bhandari

  • TDS return excluding WCT line items

    Hi Experts,
    According to my understanding TDS return in sap are taken by selecting section codes in J1INQEFILE. By using a validation it is required in my system to fill business place\section code in vendor invoice hence section code is updated in TDS wHT codes and WCT codes line items.
    Please help me to understand that what setting i have to do so that section codes should not updated in WCT WHT line items so that WCT line items can be excluded in TDS return.
    This is the case where TDS and WCT both are applicable in same invoice and WCT is also treated by WHT codes and WHT keys.
    Please help..
    Regards,
    Kuldeep Dubey

    Hello,
    Generally I suggest clients not to do the payment of open WCT items through J1INCHLN, hence it is not picked in the quarterly returns.
    The payment can be done through a G/L payment transaction like f-07.
    Regards,
    Sam

  • URGENT PL - Transfer of open items to new GL account

    Hi
    I am in middle of a crucial situation.
    My situation is like this. My current GL account is non-open item managed account. I have some thousands of line items for this account. I would like to open a open item managed account for a different purpose. I would like to transfer all these balances to the new GL account. Please note that it is not just transferring of balance. It must be transfeered each line item wise, instead of transferring a single balance. I have one more old account with the same scenerio which is a open item managed account and which should be transferred to a new account which is also a open item managed account.
    My base requirement is to transfer all the current account open items to new account open items as line items instead of total balance. Is there any way to do so.
    Please note that when we use F-04 with Transfer posting with clearing option, it will clear all the current line items in the old account and post the net balance to the new account.  This is not what I want.  In the new account, I would like to see all the line items also as open items.
    Please suggest me.  Full points will be awarded for the right suggestion.
    Thanks and Regards
    Raj

    Hello Raj,
    This is only possible with program FAGL_SWITCH_TO_OPEN_ITEM which is available from ECC6.0 EP3.
    See note 175960.
    Regards, Kyoko

  • Dispute case for a credit note

    To get approvals for a customer refund, I want to use dispute cases. To make this work, I will have to create dispute cases for open credit notes from customer line items (FBL5N). However, I get an error message 'Dispute case cannot be created without receivable'
    Do I need to define a new case type to be able to create a dispute case for a credit note?
    Cheers

    Hi Vicky,
    A dispute can not only include a credit note.
    There has to be a debit accounting document in the dispute as well.
    If a customer wanted a refund you have two options:
    1 - You can dispute the original invoice or invoices, and then raise a credit note and attach that to the dispute. The customer will then pay the invoices and take the credit note.
    2 - You can create a customer disputed object. This allows you to create a dispute without reference to an invoice. You can then attach the credit note to the dispute.

Maybe you are looking for