Not Sending to Hotmail in exchange 2007..Incoming mail is ok
Hi,
From our organisation mails are not going to hotmail but others are ok..Last week we are in a blacklist and once clear from blacklist still hotmail outgoing mails not working ..
Bounce back message below..
Delivery has failed to these recipients or distribution lists:
An error occurred while trying to deliver this message to the recipient's e-mail address. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message, or
provide the following diagnostic text to your system administrator.
The following organization rejected your message: [65.55.37.88].
Diagnostic information for administrators:
Generating server: irn2.bcci.bh
[65.55.37.88] #<[65.55.37.88] #5.0.0 smtp; 5.1.0 - Unknown address error 550-"SC-002 (COL0-MC2-F37) Unfortunately, messages from 88.201.33.130 weren't sent. Please contact
your Internet service provider since part of their network is on our block list. You can also refer your provider to (delivery attempts: 0)> #SMTP#
Please assist me
Regards
Shibu Hassan
Here are some suggestions. Just keep in mind that this isn't a Hotmail support forum.
http://www.rackaid.com/resources/hotmail-blacklist-removal/
http://www.mydigitallife.info/how-to-remove-server-ip-address-from-msn-hotmail-block-blacklist/
http://blog.returnpath.com/blog/tonya-mitchell/help-im-blocked-at-hotmail-what-do-i-do-now
--- Rich Matheisen MCSE&I, Exchange MVP
Similar Messages
-
User created apple id account, verified but know she is unable to log on, it says incorrect password, she tried to reset via forgot password option but it does not send reset password page to here e- mail address, how can i get this sorted? or how can i get her whole apple account deleted and created new one using same e - mail address?
The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.
-
ever since i upgraded my os to lion, my quickbooks can not send emails to my draft folder in mail. help!
Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc. -
Address book: GAL initial not visible, only by searching (Exchange 2007)
Hi all,
in the address book there is the GAL from our Exchange 2007. But I can't see any contacts when I click on the list.
Only when searching (search bar on the right side), contacts appear.
Is this the standard or what can I do to see ALL contacts from GAL initial (without searching)?
Thanks for your help.bneely: Where is this intended behavior documented? I have looked everywhere and am finding nothing noting this. The GAL is viewable through OWA and so it should also be browsable through EWS.
-
Exchange 2007 - Mac mail broken?
Since yesterday I have not been able to receive email on Mac mail connecting to hosted Exchange 2007 from GoDaddy.
I have deleted the account twice now, both times the mail synchronises up to current mail and then no new mail comes in.
When I try to send mail I get :
'Cannot send message using the server [email protected] (exchange). The exchange server 2007 connection to server ex1.secureserver.net failed '
Funny thing is the mail does actually arrive with recipient but it remains in my mac mail outbox.
Email is working fine using web/owa and fine on iPhone. This also works fine on my Windows 7 Machine using Outlook 2007 so it is no GoDaddy's issue.
Did Apple break something in an update?I have just been able to verify that this is indeed a GoDaddy issue. I have two Exchange accounts, one hosted with GoDaddy and one on a corporate Exchange server.
My GoDaddy hosted Exchange account is not working at all right now, after the issue started yesterday I deleted the account, rebooted and added it again and I now don't see ANY emails now in my Inbox or other folders on the Exchange server. I also lost all of my calendar and delegate calendar info in iCal (but it's all still on the server). OWA, iPhone, and Outlook on a virtual PC continue to work fine.
My corporate Exchange account continues to work as expected in Mail. I just had a colleague send me several test emails and meeting requests, I was able to see the message contents (not just the header like I was seeing on the other account yesterday), reply, and accept the meeting request.
I guess the fun part starts now - getting the dipsh**s at GoDaddy to figure out what they broke. -
Exchange 2013 CAS-MBX / Exchange 2007 Edge Mail flow
I am in the process of migrating from Exchange 2007 to Exchange 2013. I have installed my 2013 Cas/MBX into my environment with the existing 2007 Hub/MBX and existing 2007 Edge. Mail flow on the 2007 side is unchanged (working) but on the 2013
side I am able to receive mail but I can't send (from test mailbox). It just sits in the que on the 2013 CAS/MBX until it expires.
Any ideas? My Exchange 2007 servers are both upgraded to SP3 Rollup 13 so the versions should be fine.I redid my edge subscription (applying the xml on the 2013 hub). All works the same (mail flow on the 2007 side works fine but unable to send out for mailbox's that live on the 2013 side). One thing I noticed is that when I ran start-edgesynchronization
I get the following:
RunspaceId : xxxxxx
Result : CouldNotConnect
Type : Recipients
Name : XXXX
FailureDetails : The LDAP server is unavailable.
StartUTC : 9/15/2014 2:03:23 AM
EndUTC : 9/15/2014 2:03:23 AM
Added : 0
Deleted : 0
Updated : 0
Scanned : 0
TargetScanned : 0
RunspaceId : xxxxxx
Result : CouldNotConnect
Type : Configuration
Name : XXXX
FailureDetails : The LDAP server is unavailable.
StartUTC : 9/15/2014 2:03:23 AM
EndUTC : 9/15/2014 2:03:23 AM
Added : 0
Deleted : 0
Updated : 0
Scanned : 0
TargetScanned : 0
I am able to ping my domain controllers / edge server and I can also telnet to ports 389 & 3268. I have restarted my Active directory topology service -
Problem moving folders on exchange 2007 in mail.app
Hi,
I've got a problem i'm fairly certain is a bug. If I accidentally drag an exchange folder into another folder in Mail, there is no way to drag it back out. I can only drag it into another folder. Let me try to replicate my folder setup here:
Facebook
Personal
Company
Newsletters
eBay
Faxes
Someones Name
Server Messages
LFD Messages
If I want to drag a folder (say Newsletters) out of another folder (Company), my options are a follows:
A) I can drag it into any other unopened folder (It highlights the folders)
or
B) the following lines appear in the lineup
Facebook
Personal
Company
o---------
Newsletters
o---------
eBay
Faxes
Someones Name
Server Messages
o----------
LFD Messages
o----------
I would expect full length lines to appear, such as:
INBOX
o-------------
o-------------
Someones Name
o-------------
Server Messages
o----------
LFD Messages
o----------
o-------------
But the full-width bars do not appear and thus do not allow me to reposition folders or drag a folder out of a subfolder.
The only thing unique about my installation seems to be this:
A) The last folder in the list has a subfolder
B) I've got 16,000+ messages (the darn "server messages" folder!)
Any help would be much appreciated!
I've got a Mac Pro running 10.6.2 with Mail version 4.2 build 1077.I had the same problem with a test install of Exchange 2007.
While making yet another pass through IIS settings, I noticed that the www service was set to run in "IIS 5.0 isolation mode" (Web Sites Properties dialog --> Service tab). After removing the check from the box and restarting IIS, OWA 2007 worked as advertised. Haven't tried ActiveSync yet. -
Manage full access and send as permission in Exchange 2007
Hi,
I try to delegeate helpdesk the permission in ECM to manage Full Access and Send As permission.
I ran the PS command
Add-ADPermission -Identity "CN=Exchange Org,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local" -User "domain\ADGroupDelegation" -ExtendedRights ms-Exch-Store-Admin -InheritanceType
All
Now the helpdesk tech are can manage Full Access permission in EMC, but still not have access to manage Send As permission.
Thanks for your help !
MA
M.A.Hi,
The issue maybe related to the Active Directory Replication Latency. The Send As permission is not granted until after replication has occurred. Replication times depend on your Microsoft Exchange and network configuration. To grant the permission immediately,
stop and then restart the Microsoft Exchange Information Store service. You can restart the Microsoft Exchange Information Store service to check the result.
Here is a relate article for your reference.
How to: Send As permissions and how long it takes for them to apply
http://blogs.technet.com/b/pakaloge/archive/2009/08/21/send-as-permissions-are-not-enforced-immediately.aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Shared mailbox - send as and auditing Exchange 2007
Got 3 users A,B,C who all access a shared mailbox X.
They have a requirement to be able to answer emails sent to mailbox X BUT the return address to be X (i.e. not their own or send on behalf etc) so any subsequent relies still go to X and not the individual email addresses.
However, enother requirment is that there needs to be a way to determine which user (A, B, or C) actually sent the email from shared mailbox X.
Any way at all to do this?Hi,
Since the full access permission has been assigned to users, please give Send As permission to these 3 users (A,B,C) for this shared mailbox X. Then user A,B,C
can send as the mailbox X with the From field shown as Mailbox X. Please follow these steps to set it:
1. Make sure the Full Access permission have been configured correctly.
2. Give send as permission to UserA, UserB and UserC for shared mailbox X.
Add-ADPermission -Identity “Mailbox X” -User UserA -Extendedrights "Send As"
Add-ADPermission -Identity “Mailbox X” -User UserB -Extendedrights "Send As"
Add-ADPermission -Identity “Mailbox X” -User UserC -Extendedrights "Send As"
3. Then UserA, UserB and User C can send messages by the following steps in Outlook:
a. Click New Email > OPTIONS > From, then the From field is shown in the message.
b. Click From > Other E-mail Address, and select the Mailbox X.
Then the recipients would receive the messages which the From field is shown the Mailbox X name instead of UserA, UserB or UserC.
To track which user has send as Mailbox X to the recipients, we can enable message tracking log or
Mailbox audit logging to track it.
Regards,
Winnie Liang
TechNet Community Support -
Maximum send size who controls exchange 2007
who wins ?
the global settings > transport setting is 20mb
but I also see Send connectors with a limit of 10mb
thanksHi,
David M is right. In this situation, the limit on send connector will take precedence.
Following are the basic categories for the scope of the limits available for individual messages:
Organizational limits
Global limits
Connector limits
Active Directory site links
Routing group connectors
Server limits
User limits
The path evaluated is as follows: User Send Limit > Receive Connector > Organization Checks > Send Connector > User Receive Limit
In general, the lowest size limit on an e-mail route determines if a message can be successfully transported from sender to the recipient.
One exception to this approach is the user limits. User level limits take precedence over other message size restrictions.
Understanding Message Size Limits
https://technet.microsoft.com/en-us/library/bb124345(v=exchg.141).aspx
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/f3a93e3a-8a45-429d-a114-77d2df5894a6/exchange-2010-message-size-limit?forum=exchangesvrsecuremessaginglegacy
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
How to send emails to an exchange 2007 server?
The secure connection type is TLS and I added the the following statement.
props.put("mail.smtp.starttls.enable","true");But I got the following errors. Do I need to import the SMTP host certificate? Thanks for your help
javax.mail.MessagingException: Can't send command to SMTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorExc
eption: PKIX path building failed: sun.security.provider.certpath.SunCertPathBui
lderException: unable to find valid certification path to requested target
at com.sun.mail.smtp.SMTPTransport.sendCommand(SMTPTransport.java:1717)
at com.sun.mail.smtp.SMTPTransport.sendCommand(SMTPTransport.java:1704)
at com.sun.mail.smtp.SMTPTransport.ehlo(SMTPTransport.java:1088)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:46
8)
at javax.mail.Service.connect(Service.java:313)
at javax.mail.Service.connect(Service.java:172)
at javax.mail.Service.connect(Service.java:121)
at javax.mail.Transport.send0(Transport.java:190)
at javax.mail.Transport.send(Transport.java:120)
at EmailSender.main(EmailSender.java:106)Probably.
-
The whoosh sound is not working on out going mail. I've done everything in settings etc... Mute is not on... What the heck??? Any ideas?
Settings>General>USE SIDE SWITCH TO>Lock Rotation.
Make sure sound is not muted in Control Center (little bell)
http://i1224.photobucket.com/albums/ee374/Diavonex/ac7f6dc314aca5d618ac2f55616be 20e_zpsa92a3ebd.jpg -
Exchange 2007 OWA sends attachments Outlook connector clients cannot send attachments.
Exchange Server 2007 SP1 + Rollup ***Problem with sending email attachments from Outlook 2007***
* Inbound mail arrives in OWA and Outlook normally with and without attachments.
* OWA email to external email account with attachment goes thru successfully.
* Outlook 2007 sends to an external email address with attachments the message does not arrive at the external mailbox. The messages leave Outbox but are never delivered. The messages appear in Sent Items also.
* Outlook sends non attachment emails to external addresses successfully.
* Outlook sends email attachments to local domain accounts fine.
#1 Exchange Server on Server 2013 fully patched problem commences. Exchange Server on version less than first RTM release of Exchange 2007.
#2 Outlook profiles were changed to see if that is the problem.
#3 Upgraded Exchange to SP1 and Rollup 10(Rollup was autodownloaded by MSUpdate)
#4 Ran EXBPA nothing of any interest in the report.
--Unified Messaging not configed (Done nothing)
--SenderID (Re-enabled) I had shut all of the antispam to eliminate these.
-- Junk Store threshold not configed (No change)
Any suggestions to get Outlook clients capable of sending attachments configured.
Thx,
-ScotHi Scot,
Providing some information on Poison Queue:
The poison message queue is a special queue that's used to isolate messages that are determined to be harmful to the Exchange system after a transport server or service failure.
The messages may be genuinely harmful in their content and format.
Alternatively, they may be the results of a poorly written agent that has caused the Exchange server to fail when it processed the supposedly bad messages.
The poison message queue is typically empty. If the poison message queue contains no messages it doesn't appear in Queue Viewer or
Get-Queue results. The messages in the poison message queue are never automatically resumed or expired. Messages remain in the poison message queue until they're manually resumed or removed by an administrator.
According to the description above, I suspect Outlook 2007 changed the email's format when send email with attachment. The reason as below:
If the original email's (with attachment) content or format is harmful to the Exchange 2007 server, it will go to the Poison Queue when sending via OWA. However it didn't, sending via OWA is perfect. So I suspect it is an issue on the Outlook 2007
client side.
Please using Pipeline Tracing to verify whether there is something changed during transmission.
More details in the following article:
Using Pipeline Tracing to Diagnose Transport Agent Problems
http://technet.microsoft.com/en-us/library/bb125198(v=exchg.80).aspx
If it is convenient, I suggest doing following tests to narrow down this issue:
Note: Same content, same attachment, same format.
1. Please using Outlook 2010/2013 or others' Outlook clients for testing.
2. Please change to another format for testing. More details in the following article:
Change the message format to HTML, Rich Text, or plain text
http://office.microsoft.com/en-001/outlook-help/change-the-message-format-to-html-rich-text-or-plain-text-HP001232996.aspx
Thanks
Mavis
Mavis Huang
TechNet Community Support -
This just started out of the blue today. I get a message saying email cannot be sent.
I have done everything in the link TechMastr suggested. I can not send a hotmail message from any of my I-devices. I thought it might be just my accounts, but tried my husband's device as well. This includes things not connected to wi-fi and on 3G. Could it be hotmail? It is so frustrating.
-
Exchange 2007 not showing all mails
There are a lot of mails within folder not shown within apple mai! I connect with the Exchange 2007 setting and it just does not sync well. I tried Exchange IMAP which works, but lead to different problem like having a separate 'Sent' folder!
If I check those folders with OWA ord Outlook I'v got hundrets of mails. Even my iPhone shows all mails! But Apple Mail doesn't.
The Syncing of Exchange 2007 with Mail is broken! We are three people working with it (all software developers) and there are so many problems...
i.e. renaming folders if you have the option 'keep mails and attachments' set and several people are using the same account for archiving mails within project folders...I removed now the whole mail profile (the folder with finder). I added the account again and still I'v got folders which just show mails up to december 2009. That's **** for us.
I have no way of 'resyncing' the folder...
Maybe you are looking for
-
How to pause stage/swf with audio when a new tab is opened/ out of focus in browser
I have created a container in Flash Professional CS5 for my project's CBT. I've been able to script many of the features we require using AS3, but there are a couple of things I'm still trying to work out. I would like the swf presently playing in o
-
HT1338 How can I upgrade my Mac OS X 10.5.8? I can not perform a software update
I am trying to update my software to a OS X Mountain lion but can not.
-
How to Append an existing Excel file?
I am using the jexcel api to write to a new excel file. Each time i run my program, it creates a new Excel File by the name i give it. my code to create the excelFile is as below:- File excelFile=new File(workDir+"\\"+fileName+".xls"); WritableWorkbo
-
Audio input device missing since repairing permissions?
Help! I advised my husband to repair permissions on his macbook today so he did and now he's angry with me because one of his audio input devices is no longer showing up in system preferences. It's something called a "firebox" and he uses it to recor
-
FM or BAPI - get objects with evaluation path
Hi guys In my last course HR350 we used a function module to get all object with an evaluation path in OM.. I just dont know this FM anymore and cant find it. Which FM do i need for to get all objects for the evaluation path "L-D-E" thanks!