Number of decimals in the stock, availability tab.

Hi,
Dose anybody know if it is possible to change the number of decimals that appear in the availability tab, in the stock. It appears 3 decimals (as is defined in the data type).
any clue???
thanks for your attention
best regards.
Jorge Vigo

Hi Sorin,
thank you very much for such a clear answer.
Regarding the question of how to give the parameter value, we did input once 25,10 and ended up in an error upon "modify application" execution. We actually had to delete that entry (Full Optimize Problem) because BPC seemed to not like the comma at all in the tblDefaults table where that value is written (by the way, we did delete it through web admin as you suggested, not directly in the table, -almost- never delete directly from the table
If just a plain 25,10 is the appropriate value, do we need to delete that value from Web Admin once the application has been copied and processed? Should we rather not have any problem at all by inserting 25,10 in Web Admin?
Thank you,
Rafael

Similar Messages

Check the Stock of a particular material is available in SAP R/3 from Java

Hi all,
We have both SAPR/3 and Java Based Systems and going to integrate with XI.
For Java user is it possible to check the Stock of a particular material is available in SAP R/3 system or not.
For this requirement can we create any scenario and get the stock available info from SAPR3?
If so then which type of adapters we have to use in this case.
The Java user don't want to store any data here and there but just view the stock is available or not just from his end only.
bye
regards
konala

You can use synchronous Java Proxy-XI-RFC.
Code the RFC to get the stock of R/3 material and route the response back to proxy.

How to find out if the stock is available for the sales orders

hello gurus
We have 25 sales orders.. for which we did not have any stock.. so we produced internally and now the stock is available physically and stock is updated in SAP as well.
How can i know that for all the 25 orders ..if the stock is now available for all the orders.. we have a requirement that unless we have a stock available for each order we cant create deliveries.. againts the sales order.
I would like to know what is the best possible way to check the stock availability for all the 25 orders at one time.
Note : All 25 orders have different materials.. in them
regards
mohammed

Hi,
To check the stock availability tcode is MMBE, enter the material no, plant and storage location and then click the EXECUTE button ,u will see the stock.
For different materials , u ve to repeat the above steps.
Reward points if it helps.
Regds,
Pallavi

Material should be determined when then the stock is not available

Dear All,
One of our scenario is to do material determination. But the alternative material should be determined only when the actual material is not in stock.
Kindly suggest the solution.
Regards,
Mullairaja

As rightly said by friend Anirudh V B,
its possible through Material Determination. But not possible without ABAP coding.
With the help of ABAP with min coding you can achieve this,
like,
let the ABAPer write coding to check the stock availability of the entered material before triggering "material determination" records.
To do this availability check , then can jsut use the existing Function modules : BAPI_MATERIAL_AVAILABILITY (OR) AVAILABILITY_CHECK. if the stock found zero / nil, let the "materail determination should trigger, else process as normal .
its already available, doenst need / take much time , but ABAP involvement is needed to fulfill your requirement.
Regards,
Reazuddin MD

Automatic BOM Selection as per Stock availability

Hi...
I have a query.....How can i set an Automatic BOM selection as per stock availability
Problem is that the client is having more than 1 type of raw material which can be used, so the user needs to consume the ROH as per the stock availability, in that case he has to manualy check and amend the Production Order accordingly.
Hence, i want to set a system wherein the system would do the checking of the ROH material and then select that material and execute the production order accordinly.
Requesting your valuable inputs.
Thanks in advance,
Harris

Harris,
Please explore the possibility of defining "Alternative Item Group", in the BOM Item level details(Basic data tab).
From Application help for your referance,
Alternative item: group
Consolidation of alternative items within a BOM. Every material in the assembly can be included in the alternative item group.
Use
As soon as you enter an alternative item group, you see an additional dialog box with the following data: ranking order, strategy, usage probability.
You can maintain alternative items in the following situations:
Alternative positions with specific usage probability
These alternative items are incorporated with a specific usage probability. Enter the usage probability for each alternative item in the group, so that:
dependent requirements are determined in requirements planning
dependent requirements are changed to a reservation in the production order
Alternative positions as information
You can enter an alternative item for information purposes. This item would then, for example, only be taken into account in situations involving missing parts.
As there should be neither dependent requirements nor a reservation for this item, enter no usage probability.
Procedure
Enter the same character string to denote the alternative items of an alternative item group.
Enter the same strategy for all alternative items in the alternative item group.
Dependencies
Alternative items are valuated in the following way:
Dependent requirements determination
Requirements planning determines the dependent requirements according to the usage probabilities that have been entered.
If the usage probability is 0%, then no procurement is planned for the item. For information purposes, however, dependent requirements with 0 as quantity are created.
Withdrawal posting
You can control the withdrawal posting for the resevation in the production order in the following way:
Withdrawal according to usage probability (manual change is possible)
Withdrawal if there is 100% availability
(Check ranking order and strategy)
Example: See Strategy for alternative position
Regards,
Prasobh

Block Stock consider during MRP Run and Stock availibility check

Dear All,
I am facing the stock availibility check , Sytem consider the Defective material which is Block in same storage location ,and system not generate the Planned order .
-Blocked Material stock 100, and requirement 100 then system not generate the planned. Client need the system generate planned order 100 , Because 100 material is defective.
I have configured the system scope of availibility , Block stock check remove , but problem is not solve.
Thanks
Rajesh Tiwari

Dear ,
Can you please re-check your MRP plant parametrs in OPPQ wether you have selected blocked stock( Available Stock tab ) option by chance ?
Please de-select the same and re-run MRP.Generally MRP does not consider block stock in net requirement calcualtion .One more thing , MRP does material avilablity check as per OMJJ set up ( define availbality chek ) but does not consider the same while doing net requirement calcualtion to generate PR rather it goes down to MRP plant parametrs ( oppq or oppr )
Hope this is clear
Regards
JH
Edited by: Jiaul Haque on Sep 16, 2010 9:29 AM

Moving the stock from quality to unrestricted.

Hello Experts,
This is regarding QM issue.
in inspection lot certain lot quantity is entered in quality and it is not cleared.
the system status for that lot in QA03 is UD ICCO PRII STUP
now the question is how to clear this one.
even i checked for inconsistency,but there is no inconsistency exits.
kindly tell me how to proceed further and solve this issue.
Regards,
santosh.

Hi Santosh, Yes no problem. You can post.
You have now identified the correct lot.
Select this lot and click on execute button. Then go to stock posting tab and post the remaining quantity to unrestricted use.
Itu2019s absolutely correct to post the stock against this lot.
In fact we can say earlier selected lot was incorrect as it was not having status ending with SPRQ or SPST. I explain this to you.
For material XYZ, 5 inspection lots are created containing 20 Qyt each (say lot numbers are 1,2,3,4 and 5). When you look at MMBE, you will see that quantity 100 is lying in quality inspection which is the sum of all lots quantities.
Now one by one you go on posting stock to unrestricted and giving UD. Accidently you gave UD for lot number 3 without posting the stock. Now system will show 20 Qty in quality inspection in MMBE. Here the first task to identify the correct lot against which we did not carry out stock posting. In order to identify this correct lot number against which stock posting was not done, we execute QVM2 transaction. Here lot number 3 has status SPRQ i.e. stock posting required. If you try to post the stock against lot other than 3, system will definitely throw error because it was already posted.
Hence the output of QVM2 always gives the correct lot against which stock posting is not done.
Regards,
Anand Rao

QI stock availability & releasing

as it is configured in the system, QI stock is available stock, and won't trigger missing parts for the production order. however, is there a way in the system, that when i release an order, it would restrict me, because stock is still in QI and hasn't been UD-ed.?

Hi raf timan
In transaction OPJJ - Define Scope of Check uncheck the incl.quality inspection stock for the respective availability check entered for the mateial in the material master(02).
This setting will exclude the stocks available in quality during availability check in production order.
To restrict the production order release when there is a stock deficit of the input materials, goto transaction OPJK - Define Checking Control select the entries for respective plant, order type and business function 2 - Check availability during order release.
Go in to detail in the material availability tab in the Mat. release enter 3 -No release if parts are missing. This will restrict the release of order when stock deficit.
Regards
Soundar

Maintaining Stock Availibility : physical table or materialized view ?

Hi All,
We have typical Order processing application where I should maintain
stock availibility => Order is rejected if Stock is not available. The number of orders is 1000 perday, 22 branch, using VPD. 10 users each branch.
We are really tempted to use JUST view /materialized view to maintain stock position. (where traditionally we use a phiysical table for this, updated after insert/update/delete of transactions)
So the view will be like this :
Create View Stock AS
Select Prod.Code, Prod.beginning_balance,
( SELECT Sum (Qty) from Purchase Where ProdCode = prod.code ...) AS Purchase,
( SELECT Sum (Qty) from Order Where ProdCode = prod.code ...) AS Order,
From Products Prod
So to get the stock availability for a particular product :
Select Beginning_balance + Purchase - Order from Stock Where Code = ...
Please give comments, will this work with good performance ?
Or has anybody done like this in their application ?
Thank you for your help,
xtanto

If we're talking about a materialized view, I assume you'd do incremental fast refreshes. If we're talking about 1000 transactions a day, I wouldn't be at all concerned. Growth of the transaction table ought to have no impact on the speed with which the materialized view could be refreshed.
I can't think of any blocking issues that would arise from using a materialized view that wouldn't occur if you were updating a separate physical table. The timing might be slightly different, but Oracle's multi-version read consistency ought to work the same either way, hence you ought not ever block.
Justin

Customer Order Assigned to Tranport Order. Stock Available ?.

Hello everybody,
Our system release is 47.200.
We are looking for run a transport order assigned to a customer order.
What happens:
We have prepared the customizing and also a user exit to have the option to work with the assigned orders.
Currently we can create the suppliers assigned orders
and also we can create assigned transport orders.
The problem appears when we want to make the expedition of the assigned transport order VL10G, then the system says that we dont have stock available and that is not true because we have stock available Unrestricted Use.
4999200004 000010 Only 0 ST of material 0401010 available
4999200004 000010 An item with no delivery quantity is not permitted.
The system looks the stock available for customers not the stock
Unrestricted Use.
Is possible to make a customer order assigned to Transport Order and this looks the stock available in the status Unrestricted Use.
If we have to make a movement every time that we have stock available for the transport assigned order.
It will not be a good process, will be very manual or if we will have to create a not standard Program sure that it will make mistakes...
We are looking for this solution and sure that in a future we will need for
the same with intersociety orders.
Thanks for advance,
Regards,
Xavier Carbó

Hi,
I will explain our problem step by step:
1.- In our system we have made the configuration to be able the assigned orders:
When we make a customer order we can create an automatic purchasing order
if we change the item category of the customer order.
Also we can create a Transport Order.
2.- We use the Transport Orders to send material from the central warehouse to
the little warehouse.
3.- The Transport Order is similar as Purchasing Order, the different is that this
kind of order make a Picking / Delivery note in the central warehouse.
With this delivery note we make the reception in other warehouse.
4.- The problem that we have appears when we want to create
the Picking / Delivery note. with VL10G
At this moment the system says that we don't have stock available.
Our Assigned Transport Order is looking the Customer Stock Available
not the Unrestricted use stock that is our normal stock ATP and is where
we have always all our stock ATP .
5.- For prepare the delivery note I have to make a material movement
of stock to translate the Unrestricted Stock in Customers stock ATP.
If I have to make this movement every time it will be very manual and
we will do mistakes sure.
I want that the Assigned Transport Order checks the Availability with the
ATP Unrestricted Stock.
I don't know if we can do something to find an automatic solution for the ATP,
for us it will be very interesting because we can prepare this Transport orders
connected to the Customer Order and this will be great.
Thanks for advance,
Xavier

Stock/Availability updation terminated(MD04)

Hi all,
After posting of GR with MB31, i was refresh the Stock/Availability list. While refreshing it was terminated. And an error message displaye as " Express document update was terminated received from author SAP". But GR documet was posted.
What s the problem with my steps? Kindly explain.

Dear Gopinath,
Check for the lock entries in the T code SM12,select the relevant one and delete it.
Check in MB51 for the latest document along with the time and for movement.IF its prsent and if found
ok in MD04 also means leave it as such.
Check and revert back.
Regards
Mangalraj.S

Change Amount depending on number of decimals for a given currency

Hi All,
I have a requirement to change the amount field based on the number of decimals.
I am using 'BAPI_CURRENCY_GETDECIMALS' to get the number of decimals for the given currency.
I am having an amount field(say 3000.00), that needs to be changed.
In our case, we have to change the amount field if the decimals are less or great than 2.
Eg:
Suppose, if no.of decimals is 2, then the same amount should be returned, i.e., 3000.00.
If the number of decimals is 1, then the amount value should be multiplied by 10, that is 30000.0 should be returned. If the number of decimals is 0, then the amount value should be multiplied by 100, that is 300000 should be returned.
If the number of decimals is 3, then the amount value should be divided by 10, that is 300.000 should be returned. If the number of decimals is 4, then the amount value should be divided by 100, that is 30.0000 should be returned and so on.
Any pointers would be helpful..
Thanks & Regards
Gowthami

Hi All,
This logic works fine for multiplication. But checking conditions for decimals > 2 would involve many conditons.
I think this can be achieved by two ways.
First way is by concatenating number of zeros to 1 depending on decimals and either by dividing or multiplying the values by checking the condition.
Second way is by shifting the decimal point either left or right depending on the decimals.
Please help me in implementing the above.
Thanks & Regards
Gowthami

Check stock availability in non-PROD loc

Hello,
I have set my production st/location(PROD) in material master, When I creates the prod order it always check the stock availability in PROD location and pops up missing parts as stock is in raw materials loc.
Can we set something, so that while prod order creation, it should check stock availability in all raw material locations (but not in PROD).
added laterly----
I think it can be done via OPJJ, no sto loc inspection, but what could be the pro/cons for setting this indicator.
Please suggest.
Regards,
JPS
Edited by: Bhatti JPS on Apr 7, 2010 5:35 PM

JPS,
If you make the OPJJ setting, it will check all storage locations in that plant, including PROD. Depending on what this StLocn is used for, this is probably OK.
Some companies 'stage' their materials, which means they move stock from RM stockroom to a production floor staging area location. Then, they run their ATP. 'Missing parts' means they have to go to the RM Stockroom, get the missing stuff, and move it into the production staging area. For these companies, they want PROD checked exclusively.
Other companies (sounds like your company) don't stage their components. They run their prod order ATP checks, and any missing parts list they hand to the expeditors, who may go to the department that makes the subassembly (manufactured component), or may go to Purchasing department to expedite the RM (Purchased component).
It really depends on the business requirements.
Rgds,
DB49

ALV column with variable number of decimals to be displayed

Hi,
I've an ALV where I need to display a numeric column with a variable number of decimal row-by-row, from 0 (no decimals) to 4.
I've declared the numeric field as TYPE P DECIMALS 4.
I've tried with DECMLFIELD in ALV catalog, and this works for 1 to n decimals, but when I leave the field indicated in DECMLFIELD equal to 0, ALV shows the default number of decimals of the field (4 in that case).
Any help will be very appreciated.
Thanks.
Jordi

No, I didn't try EDIT_MASK.
How should I use it to format output to display decimals or not depending on the row?
I have 2 kinds of values, all stored in a TYPE P DECIMALS 4: Those that really are an integer (decimals should not be displayed for that ones) and the values that really have 4 decimals (which should be displayed with decimals in ALV).
Example:
13,0000 should be displayed as 13
0,4567 should be displayed as 0,4567
With EDIT_MASK could I do that?
Thank you very much.

How to identify the equipment stock availability?

Hi,
I have created equipment, with out reference to plant / organisational elements.
How can i list those equipments in stock?
Thanks in advance.
Sonai

Hello!
You can't check equipment in stock. You can check the material availability in stock. Therefore I recommend you to maintain
serial number data in serial data tab in equipment master. Here you can maintain the material number also. To know the
availability double click on the material number, this will open the material master. In material master click on environment button
on the top menu bar, select stock overview button. This will give you the desired information. If it is available in stock the set a
particuler user status in equuipment master. To set the user status you can use a function module.
If you are talking about equipment availability for maintenance then go for planning board. Please don't forget to enter the PP
work center in the location data tab in equipment master data. Revert for clarification.
- Vaibhav Mishra

Number of decimals in the stock, availability tab.

Similar Messages

Maybe you are looking for