Numerous problems with my 1 week old Zen MicroPh

Just bought a ZMP direct from the Creative website and its already malfunctioning.
Wont charge properly and is getting extremely hot when charging (is it normal for it to get hot when charging?).</LI>
Headphone jack gone already, right earphone crackling and static.</LI>
When docked in the PC it freezes when i un-dock it.</LI>
Have managed to charge it up until it registered full, next time i went to it, battery was empty.</LI>
Have e-mailed Creative 2 days ago and had no response. Is it normal that it takes them a while to answer? Somebody please let me know.

Hi Catherina,
Firstly, many thanks for your speedy reply.
I am in England. I did get an automated response but it said I should most probably here within a day. If it takes a little longer, that's fine, i just wanted to see on average how long people get a response. As you can imagine, im very dissapointed that im having problems with my unit so early after recieving it, especially after raving about it for the first couple of days when it was working ok.
I shall wait for the support teams e-mail over the next couple of days and hope it will be resolved with me recieving a brand new unit to componsate me for my troubles. I really don't expect to have the same one repaired when i've had so many immediate problems with it.
Thank you for your assitance.

Similar Messages

Numerous Problems with Laptop T530i

I am having lots of problems with my two month old laptop T530i thinkpad . First of all the download for any thing is very slow. I did a speed test and my download only runs .24 to .35 and up load is around .96-.98. For example i tried to download a background for a destop from microsoft site. It is only suppose to take a few seconds to download.However, it took 27 minutes. This should not be. NOw a friend brought his 6 year old or more Lenovo over T60 pro cessor 1.8 1g of ram
The speed test on his laptop was from 10.5 to 15. Only took a few seconds to download desktop background. He connected his through my router. WHY IS THIS?
My nephew who is a tech at an insurance company upgraded the wifi card. drivers. Still no download speed
Video playing music from you tube stops and starts
sometimes internet explorer connection webpage can't be displayed have to hit refresh
takes awhile to load up pictures to show up on facebook etc
also images are blurry at beginning on ancestry.com site and familysearch.org. then clear up seems to take longer than my 8 year old tower pc.
HELP! Any suggestions. Who do I contact about this problem? Not a happy camper

Has it always been like this since you got it? What antivirus are you running (shouldn't mess with it but you never know) Do you have any backround programs running that could be slowing down your bandwith (like bit torrent or other file sharing programs)
It's possible you have a virus or spyware threat - I would download malwarebytes from malwarebytes.org and run a full scan and see if it finds anything.
Double check the WIFI / LAN drivers (depending on the connection you are using) and make sure you download the most recent version (From the lenovo.com website)
After the virus scan and double checking the drivers, I would reboot in safe mode with networking and re run the test or try to download the same file again, It is works in safe mode fine then you have a program or service running upon startup that is dragging you down. You can download ccleaner from ccleaner.com and once installed launch the program and goto tools, startup - it will show you everything that is loading on startup and will give you the option to disable everything loading, it's trial and error but may get you on your way to figuring out what may be causing it.
Hope this helps!

Numerous Problems with New TV@nywhere Master

Greetings all. A few days ago, I purchased a TV@nywhere Master card. I own two MSI mainboards and an MSI video card that I think are great, but so far this product has been nothing but junk. I am having numerous problems with it that I have not been able to resolve:
1. The remote control just plain doesn't work.
2. I am unable to adjust the TV volume within the MSIPVR tuner software. Turning it up and down or muting it does nothing. However, whenever I exit the program, it mutes the line-in jack on my sound card and doesn't unmute it when I run the program again! I have to run the Creative Surround Mixer and unmute the jack before I get any TV audio.
3. Originally when I booted up, the radio tuner kicked in with a fuzzy feed, even though the software was not running. I had to run the software and exit it to make this stop. I believe this has resolved itself.
4. The MSIPVR software seems very unstable.
I have tried updating all the software from the official MSI drivers page and I also tried the unofficial releases of both the drivers and the MSIPVR 3.0 beta from this forum. The 3.0 beta build seems even more unstable (though it is a beta so this is understandable), but none of my other problems have been resolved either. I've perused the forums looking for ideas, but haven't found anything that's worked. I've also tried all these steps on two different systems that I have with the same results.
I'm really shocked that MSI would release such a low-quality product as most of their other things are quite well made. I am looking to see if anyone has suggestions I can try to resolve this. I am interested in keeping this card if these can be fixed, but if not, I'll be returning this unit and picking up something from ATI instead. There's absolutely no reason for a card to be runnign this poorly and be in a shipping state.
Below are my system specifications should they be of any help:
AthlonXP 2800+ FSB333
MSI K7N2 Delta-L nForce 2
1024MB PQI PC3700 LL
Sound Blaster Audigy
ATI RADEON 9600XT
Promise FastTrak TX2000
2x40GB Western Digital 8MB (In RAID 0 Stripe)
Windows XP Professional Service Pack 2
All Latest Drivers/Updates for Windows and All Hardware

Quote from: TunerFAQ on 17-February-05, 10:17:47
One more note (great stuff Stu:))... with regards to the remote... try to give it a slight extra push into the socket :D.
As stupid as it sounds, it happens :p... at least with me it did. I kept on trying to get the remote to work in the beginning, only to find out in the end that I hadn't played it ALL the way into the input socket. After the click, it worked.
I hope you can get the sound stuff working though. That's definitely a pain :(. I'm personally having issues with the original card and new software now... but yeah, I shall wait on your feedback first:).
OK, I've finally had some time to try out the various other suggestions that have been made and unfortunately, have met with no success. I tried changing my audio to CD In on my Audigy which still has the same sound problems. I also checked out the connection with the remote and it is in all the way. Still no go on that one. My power supply ratings are:
+5V: 35A Maximum/0A Minimum
+12V: 24A Maximum/0.8A Minimum
+3.3V: 28A Maximum/0A Minimum
-5V: 0.5A Maximum/0A Minimum
-12V: 1.0A Maximum/0A Minimum
+5V SB: 2.0A Maximum/0A Minimum
At this point, I'm pretty much at my wits end. If anyone has other ideas, I can entertain them, but tomorrow if I don't have this up, I'll be taking it back. This card is demonstrating itself as just poorly designed and built. Thanks for your help all!

I have numerous problems with ISO7 such as:

I have numerous problems with ISO 7 such as:
When there is a new update I have to download it three times 1 for the computer, 1 for iphone and 1 for ipad this uses up all my GBs;
Syncing now does not update my ipad nor my iphone apps;
My apps now stay in the update folder until I open them all;
I am sure there are more issues but have not found them yet due to the above being my main issues. I do not know why Apple had to change it as this system is really making me rethink my product and am thinking of going to android.
Hopefully someone can help me.
Ciao
Diane

Diane ..
Updates can be downloaded directly on iOS devices. No need to use iTunes on your computer.
Tap Settings > General > Software Update
There have been no changes regarding downoading updates.

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Plug your iPad into your computer, open iTunes, and click Restore. This will reset your iPad to factory settings, so make sure everything important is stored safely. Once the restore is complete, do NOT restore from your backup.
If you still have problems, take the iPad to the Apple Store or another AASP (Apple Authorised Service Provider). If you're still within warranty, any service will be of no cost. Check your serial number here or find your receipt.
Hope I've helped!
PS: This is a peer-to-peer forum. Apple generally doesn't pay attention here.

Numerous problems with X1 platform and error message RDK-03032

Daily I have problem with the X1 system where the TV signal goes out and I get a message that says " Call 1-800-XFINITY and reference RDK-03032." This problem is randum and can occur at any time of day, resulting in outages for many hours, or usually the remainder of the day. If I call Comcast customer service, usually the wait is usually about 20 minutes before someone comes on and goes through another process of sending signals to my box, at which time they say they need to send a technician out. I then get a call from the technician who says he doesn't need to come out because the problem is with XFINITY's network, and that they are working on it. If I call back into customer service, I need to first make sure I have about an hour for the process because the customer support person has to go through the same diagnostic test of sending signals to confirm the system is down, before they will refer the problem back to a technician in the field. Usually during this diagnostic process, the technician puts me on hold for another 30 minutes, at which time the phone is hung up, at which time I have to start the process all over again. RDK-03032 problem continues to occur with no resolution and no one seems to be able to tell me what the problem is, or how to fix it, and no one in customer support knows how to fix this problem. I have no idea how to get this problem resolved. Does anyone have any idea?

awsomely sad / they put this item on the market and i would recomemmend you contact the fcc for a form to fill out a complaint asap as i will be doing as soon as i receive the letter in the mail , they say it is a latency problem . late is late but no show at all for hours on end is the new future. what is that suppossed to keep us victoms happy untill they can figure out what to do to cover theyre mistakes , now they are trying to replace the incoming signal which has left me with no services 10 times in 14 days , i watched a tech install a new cable from pole to house with 2 supervisors standing rigth there , when the 12th visit by a tech i explained my story and the tech said let me look out side 1 hour later after my services were cut off again the tech came to my door and told me the cable from my house to the pole was terrible and rotten and needed to be replaced again , i knew he was lying but it was after 7 pm and i had enough , i saw them a week or so before , as did the 2 supervisors , cut a brand new peice of the roll in his truck replace it with new ends , a totally new peice , so i guess the cable they are using only has a 2 week life expectancy or the tech was lying , which i beleive the tech wanted to get paid for the call , so he probably did but once again my xi service is not right still , when they get to far in they start lying because they are probably getting screwed for have to service this x1 numerous times , when i sit here and listen to the supervisors and techs tell me that the system is the problem and they are trying every 3 months to figure what the last program upgrade has screwed up for them and laugh jokingly it doesent give you to much faith in theyre ability to resolve any issues with this system face it we have no recoarse . over 200 hrs on the phone . i must have talked to every employee in the company even tom karinshank yhe ceo was contacted and after his rep sat there and picked appart evry thing i said got rude and now wont return my calls or emails they pass it to the next person , ????????????????????????????????????

Multiple Problems with 5.5 month old MacBook

Okay. I've had my MacBook since March 3rd of this year. I have a few problems with it. It's the 2GHz model with a "SuperDrive", 1GB of RAM and a 160GB HDD I added myself. I added it in May, well after my problems had begun.
My first problem is that the keyboard squeaks. This started about a week after I bought it. The spacebar and "Enter" keys begin to squeak after about 20 minutes or so of use.
The second problem is that the palm rest has been showing some discoloration, but not very noticeable.
Now for the real hardware problems.
First up, this problem is very random, sometimes the system will not boot right away. I mean, I'll press the power button and the screen will flicker. The little sleep/power light will come on and then nothing will happen for about 20 or 30 seconds. After that, the screen will light up and the sound will play and everything will work fine. Sometimes I will press the power button and nothing will happen. I have tried everything suggested in the help topics at this site and nothing has helped.
The second problem is that, occasionally, my iPods will act as if they are connecting to nothing. It only happened with my 80GB iPod. But tonight it happened with my 2G 4GB iPod mini. Both using different cables. This started tonight after experiencing the problem I mentioned above. The last time I had an iPod act like it was connected to nothing was right before the motherboard in that particular computer died.
So those two problems right there make me believe I have a faulty motherboard.
My third problem is with the "SuperDrive". Lately it has been having problems reading discs. Randomly, I will insert a disc and it will spin it.. then spit it back out. Again, randomly, it will sometimes take 3 or 4 tries before it will finally read the disc. I can try that same disc again a few days later and I will read it no problem. This happens with professionally pressed (store bought) discs and burned discs as well. Which leads me to the next issue with the optical drive. It can write CDs fine. But DVDs are another story. Any brand of disc from any manufacturer has the same result. This happens in Windows and OS X with a variety of software, including OS X's built-in software. I cannot burn a disc successfully over 2x. If I try to burn a disc over 2x, even at 4x, it fails. What happens is that, when the burn starts, it will spin the disc at 2x while burning for about the first 10% or so. Then it will spin up to full speed. If the disc is a video, after that point (which usually translates into about 15 minutes in with a 2 hour video), the movie will skip and stutter randomly on every DVD player I try to play the disc on. If it is data, more often than not, the disc will not successfully pass the verification process. If it does pass, only the "SuperDrive" will be able to read it and nothing else will. And usually when it does pass, if I am present for the entire verification process, I can hear the disc being spun up and down at varying speeds so it can read it.
The last time I had that happen was with a bad drive that failed at around the 6 month mark. My first DVD writer, so I didn't know then that it was the sign of a dead/dying/bad device.
The final problem has to do with the hinge on the screen. I'm sure anyone reading this is aware of how the MacBook opens. Well, on the rounded plastic on the hinge, that goes directly into the path of the exhaust fan when the screen is open.... the plastic is starting to slightly bubble and come part. It has also slightly changed color.
Now I really don't know what to do. I don't have a credit card, so if I call Apple Care I will have to argue with them to listen to my problems because they are not software related and, based on what I've read, they require a CC number to proceed with any help.
And the closest Apple Store is a 75 mile round trip away, so it is not reasonable to drive there. I also cannot drive there and leave the system there because I have no other computer until the middle of next week.
So, any advice would be great. Thanks.

I'm definitely going to call.
However, its definitely not the hard drive causing the issues. The problems began before the drive upgrade and continued afterwards.
Besides, the discoloring plastic, iPods acting as if they're connected to nothing, and the DVD burner not being able to burn discs have nothing to do with the installed hard drive.
Neither would the random booting issues. If the hard drive was causing an issue, the system simply wouldn't boot.
I built many PCs before buying my Mac and had a couple of Windows laptops as well. I know enough about hardware to know that the problems I'm having now are completely unrelated to the drive upgrade.
I also live in California and I'm very aware of the consumer protection laws here as I had to research them and bring them up against HP when the motherboard in my HP system died. So I'm the last person they will be able to push around

Can anyone help me with a 3 week old Infinity Conn...

Hi
Let me get it out there, I'm bored of BT, I'm bored of BT India and I'm bored of customer services moving you round to someone else and lying to you about what they said. You find someone who says they want to help, then you call them back and they deny even talking to you for example. BT India all seem good guys, but they just say the same thing. I had one bloke last night tell me that the picture on the new Infinity purchase page of BT.com was a HH2 and if that if I couldn't see it, I was looking at the wrong thing. I left BT in 2007, when I'd had enough of poor service, slow speed and being forced to use a Netgear G at my own cost - but I digress
I had Infinity installed 3 weeks ago. The Engineer was great. He installed new cable from the pole, rejigged my wiring internally, tested it all, stayed for ages and made sure ALL of my equipment connected, yes Desktop, 3 lappies, XBox even making sure Sky was showing 'connected' - top bloke. When he left, he had his laptop and my laptop, both top end machines with N cards were showing 38MB's speed, the Ipad which gets a bad press because they don't utilise the N connection was getting 20MB and all my other machines got 18-20MB on G cards - which I was told was because of G (I still don't know this to be true - but seemed reasonable) - I even had a demo of 4 machines actively streaming iplayer to give me the WOW factor
So, here we are today. I've given 6 hours to BT India over 4 days. We've tested everything twice, changed and swapped wifi adapters, moved the HH2 around the house, connected by wire, not by wire, changed through ALL the channels, TWICE, amended the box settings, run speedster and speedtest.net and all we've proved is that the most I get is 20MB on wire, BUT this only then transfers to 10MB at best on any device. This is on a isolated device, tried at different times of the day etc etc.
The best quote I've had from BT India, was - 20MB, that's not bad is it. Well it's not bad, but I'm paying for 40MB and I'd like to give WIFI a bash if that's ok with you mate
I get connected to a lady in the 'disconnections' team Monday because BT India was unable to help me further. She looked at her system and concluded that the tick was in the wrong box her end. She apparently unticked it, reticked somewhere else, told me to give it 24 hours and any problems give her a call on her direct line.
I waited - no change - in fact BT Speedster last night told me that my profile had now gone down to 19MB max - so I called her today where I got a stroppy colleague, who insisted she couldn't help, no-one would have told me that, didn't know what was going on and she was happy to disconnect me, but I'd have to pay about £200. Did I want to do that - if not, I need to phone technical
So, now you've read my boring post - What the heck do I do
You can't complain to anyone because no-one takes responsibility. You can't get a new Hub because the ones they sell here now http://bit.ly/cOKodz are in fact HH2's honest Guv, despite the lights being horizontal instead of vertical and a different shape and size. How do BT get away with this?
I'm stuck with a service that delivers the same 02 did to me on 'worse cables' but for £15.00 a month more and wifi loss that can't be solved and a hub that can't be faulted because BT are scripted to say all is well

SeanD - message sent - any chance of a follow up
Getting Worse
. Best Effort Test: -provides background information.
Download Speed
13083 Kbps
0 Kbps
24198 Kbps
Max Achievable Speed
> Download speedachieved during the test was - 13083 Kbps
For your connection, the acceptable range of speedsis 12000-24198 Kbps .
Additional Information:
IP Profile for your line is -24198 Kbps
2. Upstream Test: -provides background information.
Upload Speed
1607 Kbps
0 Kbps
2000 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 1607 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 2000 Kbps
We were unable to identify any performance problem with your service at this time.

Numerous Problems With My Phone. Am I the only one?

I got the Droid Charge in June 2012 so it's been about 7 months that I've owned this phone. The phone was fine at first but in the past few months, I've experienced the following:
Phone shuts off at random times (when the battery is not dead)
Phone randomly restarts itself
Phone dies but when I plug it into the charger it says 100% and doesn't actually charge
Phone says it's charging but either charges really slow or maintains the percentage it had when I first plugged it in
More recently, (as in today and the past 2 weeks) I've had these problems:
Phone will charge when it feels like it
Phone will be on charger for hours but will only increase battery life by a few percent
Phone will allow me to use data but I can't make/receive calls or respond to texts (4G doesn't disappear but there's a solid grey triangle at the top)
I still am unable to use anything but data, the only difference now is that my phone says no service (which is impossible)
There are a few phones on my line that are working properly with NO issues so I know that this has to be phone related.
I really need my phone to work again!

Been having problems with mine for a while also. I found changing the USB cable with my changer helped with the recharging issue. But i am fed up with this phone acting like this. Quick browse around others are having issues too.
I am going to wipe it clean and see how things go. My fear, the issue is going to be the OS. My wife's phone is also having issue.

Problem with Premiere Pro and Old School X3100

Hi everyone,
Got a problem here and really looking for help . I know the intel 965 or X3100 chipset/GPU (in a Dell inspiron 1720 running Win 7 64 bit) is way old school, but as we're waiting for a couple of i7/i5 laptop upgrades, this is what I have to resort to for some minor mobile SD editing (nothing extreme but 15-30s short commercials). With the current Intel driver (8.15.10.1930), the preview monitors (source and sequence) do not work. They're simply a blank frame (even after I render the sequence). It seems to be the Intel drivers whooping my butt as there is no problems with the standard W7 WDDM 1.1 display driver, except the computer isn't stable with freezes on wake (and no OpenGL support in PS... which isn't a big deal). I've also tried Vista 64 drivers in compatibility mode with no luck.
The rest of the CS4 suite works great. It is not the trial version and I've tried PP 4.0, 4.01, 4.1, 4.2, 4.2.1 (suggested by another post), and reinstallation. I've also tried changing settings in the Intel drivers and... even modded 965 drivers.
I know the X3100 is quite common (maybe not among PP users...) so any experience you might have would be awesome. Maybe an older Intel driver? If you can help me, I'll name my laptop after you! ...unless you realize that could actually be an insult Thanks!

This hardware sub-forum is a good place to read about what will run CS5
While HD editing (which I won't do) will require a RAID for data, what I am going to build for SD editing with CS5 and Win7 64bit is listed near the top of my notes page http://www.pacifier.com/~jtsmith/ADOBE.HTM
If you are adept with tools... build your own and save $$

Battery problem in my 1 week old macbook?

Hi,
I have a new macbook with Leopard. I have noticed that if it runs out of battery, it just shuts off. There is also a message on a gray box saying my machine needs to be restarted and then it shuts off. My old macbook doesn't do that. It put the macbook to sleep instead of shutting it off.
Is it a problem with the battery? Or are the new macbooks like that?
Thanks,
Mike

You need more RAM for the number of concurrent processes you are running. At least 8 GBs if you plan to use Mountain Lion. You can see if that's the case:
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs.

Overdrive transfer problems with new ipad and old ipod

installed overdrive for ipad on pc (win 7) and ipad2 app. downloaded book from library site and it allows 3 transfers to devices.
hit "transfer" and get error message that overdrive is not able to connect to my device(s) yet itunes shows my device and syncs my other items.
tried the manually manage idea in the help threads. i use firefox. i have installed all of the many itunes/ipad/ipod updates, tried reinstalls, reboots and new attitude...but not getting anywhere.
help needed -thanks

Quote
Originally posted by Wonkanoby
1 the board will not accept nor load a drive with old chipsets drivers on it
do a clean install or over install
2 you have to set fsb to 166 with the xp 2500 in the bios
3 if your using an old psu i dout its going to be good enough
I am having a simular problem with system hanging up and getting blue screen from time to time.Running msi K7N2 Delta- L board with corsair value select VS1GBKIT400 PC3200 1024MB 2x64Mx64 2x184 DIMM,Leaktek winfast A250 ti4600 video card,antec 350w ps,xp home loaded on 30 gig wd 7200 drive and clean install.Not looking to overclock just want stable setup as about all I do is play with PSP7 and run driving games.Think I do not have bios settings correct as I am still a beginner.Any help or thoughts appriciated.
Thanks Bruce

My 2 week old Zen Sleek just froze

Hello all,
I was just raving to somebody how great my Sleek was. A few minutes ago I unplugged it from the computer and it says "Docked" & "Please Wait". It also has the "plug" sign where the battery is supposed to be. I tried to turn it off, but all it did was light the screen up which worries me since it won't go off now. None of the buttons work & the computer doesn't recognize it. This can't be right since it's only 2 weeks old. I already put 200 songs on it. Is it broken? Any help is appreciated... This is really frustrating.
Thanks.

Wonderwall says:
A few minutes ago I unplugged it from the computer and it says "Docked" & "Please Wait". It also has the "plug" sign where the battery is supposed to be. I tried to turn it off, but all it did was light the screen up which worries me since it won't go off now.
Did you safely remove it from the computer? or, was the acti've dock on when you disconnected it's These might cause hangs.
Try resetting it. I haven't seen/touched a real Zen sleek (it is not available in my region yet), so I can't tell you where the reset button is - refer to the manuel.
This can't be right since it's only 2 weeks old. I already put 200 songs on it. Is it broken?
No, your player is not broken. Just reset it and it will be fine. It's no uncommon for HDD-based player to just hang like that. However, it should not be too often, perhaps once in a blue moon.

Numerous problems with the Adobe AIR runtime for Android

I created a app on the platform Adobe AIR for Android, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of Adobe Air runtime.
For example these phones users: LGE LG-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of Air, their phones are compatible with it.
Tell me how do I solve the problem?
In addition, I have a few questions:
1. Decides whether the problem of export application with embedded AIR runtime?
2. I build my apps with the help of ADT. How in this case to make embeding AIR runtime?
3. Is it possible to prompt the user to download and install older versions of AIR? Where to find its?
I hope to help, because the problem is global.

Hi Astraport,
I think you should embed the air runtime in your application,
Some time ago I've written a step by step guide, have a look at this post:
http://forums.adobe.com/message/3961579#3961579
I hope it helps

Multiple problems with iPhone 3GS ( 2yrs old)

The first problem involves my wifi connection. About half the time, my iPhone will just randomly disconnect from my wifi network which is usually about 10 feet away. If it is connected, I only receive 1 or 2 bars on on the screen while my MacBook Pro and other devices all have full strength (as would be expected when only 10 feet away). This makes using wifi on my iPhone incredibly slow. I have tried reseting network settings and all that, but with no success. Any suggestions?
Second, for about a month or two, my iPhone has been having serious problems connecting properly with iTunes wirelessly. I get a wide variety of error messages that include things about how I should connect my iPhone and restore it (tried that, didn't help), something about how it can't properly read the device, etc. While trying to connect to the iPhone, it sometimes causes iTunes to lockup and if I try to use wifi sync from my iPhone, it never finds my MacBook Pro. I also seem to be having problems getting the iPhone to backup to iCloud properly even when it is connected to wifi, plugged in to a power source, and locked (as it tells me to do on the iPhone) or if I try to force a manual backup. It just sits there telling me "Backing up...," but that bar never moves and it never gives an estimate of time remaining. I wouldn't be surprised if these issues were also related to the wifi issue above. Any suggestions for these problems?
I am afraid to ask, but is my iPhone on the way out? Thanks to all that help.

Regarding the wi-fi connection problem, if no change after resetting network settings on the iPhone and/or after restoring the iPhone with iTunes as a new iPhone or not from the iPhone's backup, the iPhone has a hardware problem with the wireless card or something else.

Numerous problems with my 1 week old Zen MicroPh

Similar Messages

Maybe you are looking for