Obya cross company using special ledger

Hello all,
I´m trying to configure obya, to post a cross company movemente in financila, but using a posting key = special ledger and and the system does not allow, someone can help me??
In one part of the movement I need to post in customer acc with special ledger.
Thanks,
Ana Santos

Hi, thanks for your help. The problem is that I have two situations for the same relation company A and company B.
Example 1 u2013 OBYA
Company A: Debit = 01 customer acc in comp. A / Credit = 50 profit acc u201CXu201D in comp. A
Company B: Debit = 40 cost acc u201CYu201D in comp. B / Credit = 31 in vendor acc in comp. B
When Iu2019m posting, I can start with the debit movement in customer acc (with PK 09 and special ledger) in company A; and credit vendor acc in company B (31 u2013 vendor acc), simulating I will have the automatic movements from OBYA (in bold). With this I have the problem of the special ledger solved in I only have one movement / relation to post.
But the problem is that I need another relation for example 2, and I can only make one entry in OBYA by Relation Company A - B.
Example 2 u2013 OBYA
Company A: Debit = 01 customer acc in comp. A / Credit = 50 profit acc u201CZu201D in comp. A
Company B: Debit = 40 cost acc u201CUu201D in comp. B / Credit = 31 in vendor acc in comp. B
Thanks again,
Ana Santos

Similar Messages

Cross company code Stock transfer - Special procurement Key

Hi,
Please clear my following doubts...
1. We have two company codes, Company code: A1 having a Plant: AP1, Company code B1- Pant BP1,
Finished goods sold from the plant AP1 are purchased from the plant BP1, so is there is any possibility to create a special procurement key having BP1 as the delivering plant and assign the key in AP1 materials.
2. Can i combine the two plants AP1 and BP1 for total online planning (MD01) by creating a scope of planning indicator? and run a single MRP run for both plants at a time...
Please clarify...
Thanks,
JK

JK,
I dont think Scope Planning is problem. You can create Scope of planning combining multiple plants, use transaction OM0E.
I doubt on Special procurement key option for STO across cross company codes, as the special setting needed in that case would be that Plant as to be created as Vendor / Customer. I would suggest to post this to MM forum for further response on this.
Regards,
Prasobh

Add freight cost in a cross company code scenario using a costing sheet

Dear Forum,
I will like to add freight cost to a material using a costing sheet. The freight percentage is very easy to add and works fine when the cost is added in the company code costing. My problems start when I want to add the freight in the cross-company code costing. I want to setup a cross-company code costing where the freight cost is added to the material in the buying company code and not on the selling company code. The cross-company code costing is setup using special procurement costing keys.
In below costing (CK11N) the procurement costing key is not used.
From the itemization it is shown that purchase info.record 5300067643 is read and the price of 12,97 is determined. There is added 10% in freight coming from the costing sheet.
The freight is shown in the cost component structure as well.
The special procurement type is now changed from ‘20’ to ‘AT´ on the MRP2 screen in the material master. The procurement is now pointing to an internal plant called ‘DCN’.
The costing of material 105050 is now repeated. I get the expected result from changing the procurement key, as I can now see the material is sourced from plant ‘DCN’. DCN is sourcing the material from BJ07, but that is not relevant for the example.
If I now look at the itemization again on the costing in BGA1 I now see that the price is not coming from the info.record. It is the costing in DCN that is used.
I will still like to add the freight cost in BGA1.
How do I add freight cost in BGA1 when I at the same time want to have the costing to be taken from plant DCN?
Please let me know if you need additional information on the customizing setup of the system.
Best regards,
Kim Hjorth Poulsen

Hi Srinu,
Thank You for a prompt feedback.
I have tried to follow Your advise. The special procurement costing key is customized like below.
I have updated the special procurement costing key on the costing 1 view of the material master. When costing the material it is using the special procurement key. This can be seen from the qty. structure tab in CK11N.
It is also costing cross company as intended.
The itemization looks like below.
and the cost component structure looks like below.
Unfortunately the freight is not added in the costing in BGA1.
I noticed that when the costing is made without special procurement key the costing sheet used in the costing is for material components. If the costing is made with the special procurement keys the costing sheet used is for finished and semi-finished materials. The customizing in both of the costing sheets are the same, but only when costing is without the special procurement keys the freight is added.
So unfornutely Your suggestion did not solve the problem.
Best regards,
Kim

Using Special purpose ledger for CIN

We are in the process of SAP Roll out for India. For our Company codes in Europe, we are following Calendar year as Fiscal year where as, as per Country India requirement, Fiscal year needs to be defined from April - March (V3).
We are planning to use Special purpose ledger with Fiscal year as V3 for Country India reporting. We observe that in several SAP Transaction Fiscal Year is a feild to be entered for executing the transaction.
SAP solution for Excise Duty, Service tax and Tax deduction at source are based on Fiscal year as per standard ledger or Special Purpose ledger?
Kinldy confirm, if we can use SAP CIN Transaction based on Special Purpose Ledger ?
BR - Dwijendra

Hi Dwijendra ,
It depands upon what kind of business your implementing. If it is a manufacturing then we need to have lot
of CIN functionaility from the logistics side. Excise invoice and lot of tax specific.
As such from FI side we need to have the vendor/customer TDS cycle that needs to be run and this is covered by withholding tax functionality for India specific. Which is inherited as part of ECC versions.
If your requirement of implementing is purely for reportiing in march-april then you can try the options with special ledger.
regards
pbb

Plan data in special ledger in company code curremcy

Hi,
I am posting plan data to a special ledger but it is very estrange because I post it in KP06 transaction, I enter data in EUR but when I display my Special ledger line items I appears as transaction Currency the company code currency, not EUR
Is it a customizing problem?
Thank you very much

Yes, this option is active and when I post FI documents for example, the special ledger document appear in the transaction currency.
The proble is that in KP06 when I plan in EUR the special ledger line item has in transaction currency value in USD,that is tyhe company code currency, instead of the transaction currency that I have used (EUR)
Do you understand me?

OBYA : vendor and customer clearing in cross company code transaction

Hi Gurus,
Please can any one telll me how to clear the transactions of cross company code which is in vendor and customer.
I already done a configuration in OBYA for customer - vendor.
Expected a process of clearing the cross company code transaction.
Thanks in Advance
Manish.

Hi,
If you are doing for vendor invoice,
for example:
co code 1000 and co.code2000
Use F-02 and enter following transactions
posting key 31 -vendor- company code 1000
posting key 25- expenses and enter new company code 2000.
After the entry it will display 4 line items, 2line item for 1000&2000
Regards,
Sreekanth

Effect of Activating Cross company costing in Material Ledger

Hi all,
We are live with ML from seven years and now we want to activate cross company costing. I would like to know if there will be an impact of this in the material ledger side. If anyone has comeacross this situation please share your ideas about this.
Thanks,
Santosh

thanq for reply.
IF I can update standard price in 3 views, how can i see three standard prices in different views?
I am facing another problem also here.
we have 3 company codes and 3 plants like VN01,SG01,IN01.
When I am doing standard cost estimation for IN01 with group costing variant for group valuation, I am getting error "Object was not costed", but where as If I use standard costing varaint ( PPC1), I am not getting any error, system is showing correct standard cost estimation?
Where as If I use group costing variant for other company codes, I am not getting any error.
Is there any customizing missed regarding standard cost estimation, when material ledger is activated?
regs,
ramesh

Posting using cross company code transaction must be blocked

Hello Guys,
I have a problem related to cross company code transaction.
In the OBA7 I have the document type KE that not allows posting using cross company code transactions. In the moment that I am creating a new document through the FB01, I have an error as "Consolidated companies US52 and ' ' are different
Message no. F5080. As a results, the document cannot be created by this way. This is the correct process.
But I have several documents that was used the doc type KE and the cross company code transaction was used. This is my issue. I don´t know why these documents were posted. The document come from another interface via IDOC and the IDOC not errored out.
Can anyone help on this?
Thanks
Rafael B.

Hello, I´ve checked the log and no changes since 2008.
The document was created in 2010.
This is the message: "No logs found for the selected period"
More suggestions?
Regards.
Rafael

How to use Cross Company Code document number as Reffrence.

Hi
Actually user wants to post the same debit credit line items with Editing the amounts which he has posted last month
So i suggested him to use post refference of the previous month document number.
Since that is Cross company document number. There is no source to give in T.Code FBR2. There is a fecility to give only document number of a company code not cross company code.
Assume that there are 3 company's involved in that document.
company X --- 25 line items
company Y -- 75 line items
Company Z -- 100 line items
Since he given in header data X Co code it has generated the Cross company code document number 1000X 08 ( which means 1000 is doc.number X is company code 08 is year. This is sap standard cross company code doc number format)
and individual document number is
X - 1000
Y- 2000
Y- 3000
If he post with the reffrence of X company only 25 lines will come remaining 175 line he as to post manually.
If he take Y Doc number only 75 lines will come
If he take Z Doc number only 100 lines will come
To bring all lines there is no provision to give Cross company Doc number.
Please advice how to use cross company doc number as refference.
Tks
Shivaji

Hi guru
This is answered
Thanks
shivaji

Cross-company code functionality using Idoc type FIDCCP02

Hello,
I have a problem I need to use an IDoc to create incoming invoices from a legacy system, but there are 2 functionalities that need to exist.
1.- Extended withholding taxes.
2.- Cross-company code.
I have been using the basic type FIDCCP02, because it was easy to use extended withholding taxes.
But now the functional team requested us to implement the functionality Cross-company code.
I did some test using ACC_INVOICE_RECEIPT03, where just specifying 2 different company codes at item level, SAP will create 2 different invoices one for each company code) ,
The problem here is that I need both functionality, but only use 1 Idoc type. Do you know how can I solve this problem??

Imelda ,
I am also trying to use FIDCCP02 Idoc for Cross-Company code functionality , and we are not able to do it ..
I saw this message in SDN posted by you last year but it was not answered , hence was wondering if you were at some point of time able to get any answer on this one OR did you find any solution by yourself on this issue.
I would also like to use Cross-company code functionality using FIDCCP02 , so please let me know if you have anything on this one .
Would appreciate your reply .
Thanks,
Ashutosh Chitrao

Using PO or DO as reference during STO and STO return - cross company

Hi,
May I have your valuable input of which of the following are the best practise in term of the two business process:
A - cross company stock transport order during goods receipt, and,
B - cross company stock return order during goods receipt
FYI, I am talking about two-steps procedure (i.e. movmt type 643 and 101)
Question:
For A -
During Goods rececipt will it be BEST to use a purchasing order OR the outbound delivery order as a reference?
My gut feeling is using outbound delvery document as reference, but what is the underlying reason to do this, why not PO?
For B -
During Goods rececipt will it be BEST to use a purchasing order OR the outbound delivery order as a reference?
My gut feeling is using PO document as reference, but what is the underlying reason to do this, why not delivery order?
I read the SAP help portal, it said in return process, it is best use PO because of this statement (i.e. Do not post with reference to the delivery, so that the delivery for the stock transport order is not updated), which I don't quick get it.
Hope you can shed some light.
thanks
tuff

Hi,
If your PO (sto) is of 100 quantities and the outbound delivery is created for only 80 quantities, So when you do a GR against outbound delivery you will be doing directly for 80 quantities. But if you are doing it against the PO, all the 100 quantities will show up and then you have to manually reduce the 20 quantities.
For the return process there may be a constraint as when you do a return against delivery it may not open the PO but when you do it against PO it would be updated and can be seen in the PO history and you can also see the open po quantity.
More inputs on this are welocme.
Thanks,
Atal

Consolidation entries in Special Ledger

I'm trying to create a simplified consolidation using Special Purpose Ledger, but I want to make it as error-free as possible. The idea is to have a ledger version containing only the consolidation adjustments, post the adjustments as local documents directly into this version, then run a report that aggregates the base version with the consolidation version, for consolidated financial results. So if I want to make the following consol adjustment as a local document in SPL:
DR Sales in Company Code A
CR Cost of Sales in Company Code B
my strong perference would be to post a zero-balanced document, i.e. a cross-company document. But I can't see how to post cross-company directly in SPL because the entry screen assumes only 1 company code. Can cross-company docs be done in SPL, or am I just out to lunch? The fall-back position is to post 2 unbalanced entries in the separate company codes, but that's more prone to error.
Thanks in advance for any clarification on this,
Kathryn

Sorry I never tried document splitting in Special Ledger. My understanding was it should work in the same way as GL accounting.

General Ledger Special Ledger out of balance *URGENT* Material Ledger???

We've activated Material Ledger in a company code in Jan'07.
Accounting document created because of 102 Movement type FI document looks fine but in Special Ledger document dollars against Group currency are posted to Price Difference account? This is not happening for all 102movement type documents but i couldn't establish the pattern! Any help would be highly appreciated.
Some background:
Company code and Controlling Area both got USD as main currency.
This problem is sporadic and with 102 movement type only.
Materials causing issue got Price control 'S' and Price determination '2"

Hi Raghu,
Probably I am mistaken; I was talking about SPL field movements and user exits used there. you can check that through transaction GCB2 where ledger is assigned to a company code and then u can drill down to activity and field movement assigned to the activity and can find if a user exit is used to post to a price difference account.
Let me know if I am talking about relevant stuff here. If it is with SPL then I can help u more.
Thanks,
Kumar

Go live of a new special ledger

Hi,
I need to implement a special ledger, and the company FI is already in production. The problem is that I need to start to work with the special ledger on the date 01.01.20XX, and if I pass the orders on 01.01.20XX the company is still going to enter information (adjustments) in 12.20xx -1 and I don't want to have information of the prior year in the special ledger.
I want to know if is possible to set the special ledger to be actived in a specific date.
In addition, which is the process of the go live recommended by sap to start to use a new special ledger when the company is already in production.
Thanks,
Cecilia

Walk into an Apple Store or call the online Apple Store. The sales staff will be more than happy to help you with your concerns and help you make your decision.

How to configure Funds Transfers, Cross Company Code Vendor Payments, Bill

Hi All,
Can any one help me, How to configure Funds Transfers, Cross Company Code Vendor Payments, Bill of Exchnage Payments with Automatic Payment Program?
Regards
Chandra

Hi Chandra,
This is what you need to do to configure Cross Company Code Vendor Payments.
Execute transaction code OBYA, when prompted, type in 1st coy code, say A and then 2nd coy code, say B. This would take you to the "Maintain FI Configuration: Automatic Posting - Clearing Accounts" screen.
In the first frame, where you have
Posted in : A
Cleared Against : B
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
In the second Frame
Posted in : B
Cleared Against : A
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
So, if you are using the Customer/Vendor approach, company A must be set up as both a Customer(Use Txn Code XD01) and a Vendor(USe Txn Code XK01) in Company B and vice versa.
Once you have completed this set-up, you can then use transaction F.13 and/or F13E to carry out your automatic clearing. Alternatively, whenever Payment Run is executed via transaction code F110, this would automatically clear out the payables and receivables in each company code.
However, if you intend to use the G/L approach, then the account numbers would be Inter-coy G/L account for each coy code as defined in the chart of accounts.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Obya cross company using special ledger

Similar Messages

Maybe you are looking for