OC4J Startup looks fine, but can't access any samples via "localhost:8888"

I'm working with Reports Builder Report Builder 10.1.2.0.2. I've built a JSP report and a parameter form to go with it... they both work beautifully within Reports Builder.
Now I'm trying to run it via the Standalone OC4J on my machine...
I run C:\oracle\DevSuiteHome_1\j2ee\DevSuite\startinst.bat and it looks like everything is fine...
05/10/04 12:06:32 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
I open up IE and key in "http://localhost:8888/" hit enter and receive a "The page cannot be displayed" message.
I've tried "
http://localhost:8888/examples/servlets/index.html"
and
http://localhost:8888/default-web-app/servlet/HelloWorldExample
and still the same "The page cannot be displayed"
I first suspected it might be a WinXP SP2 Firewall issue, I found a posting that said to ensure that Port 8888 is open, I added that to the firewall configuration, but I'm still not seeing OC4J "serve" any of the pages.
Any suggestions on what I'm doing wrong here??
thanks

Hmmm... perhaps this is my problem... I can not find either the <oracle_home>\opmn\bin or the <oracle_home>\dcm\bin folders on my machine... is this a "bad" thing?
The portlist.ini file is listed below...
C:\oracle\DevSuiteHome_1\install>type portlist.ini
Oracle Developer Suite HTTP port = 8889
Oracle Developer Suite JMS port = 9240
Oracle Developer Suite RMI port = 23910
Oracle HTTP Server Diagnostic port = 7200
Reports Services bridge port = 14011
Reports Services discoveryService port = 14021
Is this saying that it's expecting me to use 8889 instead of 8888?? Would have sworn I did a "default" installation.
Apparently the answer is "yes"... when I open a browser and enter http://localhost:8889/j2ee/examples/jsp/index.html the page is successfully displayed!!
But http://localhost:8889/j2ee/servlet/index.html continues to give me a page cannot be found.
Thanks for getting me this far...

Similar Messages

Can connect to WLAN, but can't access any web site...

I have a Nokia E61 that I have configured to access my wirless home network (Linksys). I use personal WPA security, and my SSID is hidden. I loaded the proper settings into an access point setting and when I go to Web, the phone shows that it connects to my Linksys router, but the web page never loads. I eventually get a time out error. If I connect to the same website using GPRS, it loads without any problem.
Any ideas?

Thanks for the reply!
I have looked at my RV082's firewall setup, but don't see anything out of the ordinary. I even disabled the firewall, but it didn't seem to make any difference. What did you have in mind that I should check?
I get the following error on the E61 when I try to access an Internet website: "Web: Connection Time Out". It takes about a minute or two for the E61 to generate that error.
Regarding the RV082's ability to assign devices to the right subnet, I have three other PCs on my network (2x Windows XP, 1x Windows 98SE), and they have always connected the first time and every time with no issue. How would I check which subnet the RV082 is assigning to the phone? On a PC, I usually do an "ipconfig /all" at the command line and see what's assigned. Is there an equivalent command for the E61 that I could enter while I'm connected?
If I remove the RV082 and plug my WAP54G directly into my cable modem, then my E61 can access the Internet. So it's definitely an incompatiblity with the settings in the RV082 and the E61. But before I/we blame the RV082, I have more or less the same problem at my employer's office: I can connect to the office network, but can't access any sites outside the company network. The only difference is the E61's error message: at work I get a "no gateway response" error within a few seconds. It's a company with around 200 employees at that site, and we're certainly not using an RV082 in the office. I have not tried to call Linksys support yet because in fairness to them, they won't know jack s*** about the E61 and how to configure/check the settings.
Is there something about the DNS settings in the E61 that I'm setting incorrectly? I have them set to Automatic in both IPv4 and IPv6 settings, which is how my PCs are setup at home and what my IT guy at work tells me should be OK.
Thanks in advance for any more advice!
BTW, I'm no big fan of Linkys either, but I've had zero problems with my Linksys products. Also, when I have had to contact Linksys for help with a setup, they have always eventually come through and solved the problem. I've tried contacting Nokia and can't even get a live person that can do anything (the E61 isn't supported by Nokia USA, and the UK phone number they gave me was just a recording). If anything, I'm ready to hurl my E61 through the window right now as I've spent way too many hours trying to get this thing to work.
hk

Firefox opens up, but, this morning, I can't access any links via Firefox. I can via Explorer. I prefer Firefox. Help!

Firefox opens up, but, this morning, I can't access any links via Firefox. I can via Explorer.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Firefox starts but can't access any website.same issue is experienced with Chrome, not Explorer

Hello, I have an issue with surfing with Firefox. The browser starts but can't access any website. The same issue is experienced with Google Chrome. On the other hand, Internet Explorer works smoothly. Thanks

Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}

Everything looks fine, but can't browse internet (BEFW11S4)

My BEFW11S4 v4 won't connect to internet anymore.
Firmware is updated (v4 1.52.03).
Tried to turn off/on both modem and router.
I did a hard reset by pressing the reset button on the back of the router.
The only setting I changed after the reset was Internet Setup. Set connection to PPPOe, entered my username and password, saved.
In Status>Router page, Login status goes 'connected' after a few seconds. Internet IP Address changes from 0.0.0.0 to 200.132.....
In Status>Local Network>DHC Client Table I can see my machine is there. I can connect to the router either by Ethernet or wireless.
But I cannot visit any website. The browser always says 'server not found'.
If I plug may Macbook directly to the modem and configure a PPPOe connection (using same ID/password), then I it works fine.
Any tips would be appreciated. Could this be a hardware problem and I'd better replace my router? It's about 8 years old now...
Solved!
Go to Solution.

Thanks for your reply.
I changed MTU from 'disabled' to 'enabled' then set its size to 1400. Nothing changed.
Then I tried to ping the IP address (I'm on a Mac, the procedure is different but I believe the result is the same) and that was the result (IP address partially replaced by 'XXX' in this message).:
MacBookProi7:~ durval$ ping 200.232.XXX.247
PING 200.232.XXX.247 (200.232.XXX.247): 56 data bytes
64 bytes from 200.232.XXX.247: icmp_seq=0 ttl=150 time=6235.153 ms
64 bytes from 200.232.XXX.247: icmp_seq=1 ttl=150 time=0.944 ms
64 bytes from 200.232.XXX.247: icmp_seq=2 ttl=150 time=0.771 ms
64 bytes from 200.232.XXX.247: icmp_seq=46 ttl=150 time=0.867 ms
^C
--- 200.232.XXX.247 ping statistics ---
47 packets transmitted, 47 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.722/133.468/6235.153/899.644 ms
I understand this is the expected answer: no packet loss.
I did not try disabling Proxy Settings on Internet Explorer, because I do not use IE (all settings were done with Firefox 7 Mac).
Then I borrowed another router from a friend – a Linksys WRT54GS – and it worked fine!
Is there any other settings I should try?

Laptop is connected to router but can't access any...

Hi Everyone
A BT engineer came yesterday to set up BT Infinity broadband in my laptop and everything worked fine until this morning.
When I switched on my laptop and my router, the icon on the bottom right hand corner of my laptop screen indicates that I'm connected to my router but when I try to open up Internet Explorer to access any website, it says that the page can't be displayed. I've tried switching both my laptop and router on and off to no avail. I'm on Windows 7 and have an HP Pavilion g6 laptop. My router is connected wirelessly to my laptop. I can surf the net with my iPad with no problems at all which suggests that the problem is with my laptop but I have no idea what the problem is and how to fix it! Has anyone come across this problem before? Any help would be greatly appreciated. Thanks.
Rosie

It could be that your computer has IPv6 selected. Try disconnecting it as follows:
Select Start
In the search field type.ncpa.cpl and press enter.
In the new window right click on your wireless network connection and select properties
In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP address and DNS server address automatically.
Once done try and connect to Internet.
Also make sure that your Wireless Network card has up to date drivers. Check on the Laptop or Network card manufatures website rather than using Windows which can be out of date.

Skype works, but can't load any websites via Chrome,Firefox and Safari

I am on Lion and I have been facing this issue since a week now.
I have 2 laptops connecting to the same wifi router. The other laptop is running Windows and browsers are able to load websites without any problem on that. But on my mac, I can run Skype, but browsers dont load any websites. Even I cant operate the Mail application, it opens but doesnt download any emails.
Since Skype is working I am sure the internet and my wifi are fine. I am guessing there is some issue with DNS. Am I correct ?
Although I dont know what to check to confirm whats wrong and how to rectify this problem. Has anyone faced and solved similar issue before?

mail would fail if the mail client is trying to resolve the mail server ie:   mail.yourdomain.com
if you want to test dns you can
open a terminal>
     nslookup www.apple.com
and to test dns via google public dns
     nslookup www.apple.com 8.8.8.8

Internet connected but can't access any websites

Hi everyone,
I have wireless and my computer was working totally fine this morning. I didn't download any updates or anything and when I came home this afternoon it said that my computer was connected to the internet but when I try to open any webpages in Safari is just says that it is trying to load the page but never actually does. MSN messenger will not work either. Does anyone have any idea how I can fix this?? I know it is not the internet because our PC on the same network is working fine. Thanks in advance!
P.S. Not completely sure of my OS, still kinda new to Macs.

journey778, Welcome to the discussion area!
Your system information states OS 10.0.x. If you are using that version of OS X you do not have an Intel based iMac. I would suggest that you upgrade to OS 10.2 at least.
If you do have an Intel based iMac, you may want to try renewing the DHCP lease. Open System Preferences->Ethernet->Advanced... and click on the "Renew DHCP Lease".

My imac 2011 snow leopard boots up to desktop but can't access ANY function just the beach ball spinning forever

My iMac boots up to the desktop. I let it warm up but as soon as I select ANY function the beachball appears and I have no function or access to ANYTHING- just this spinning ball. It has been shutdown for about 6 weeks. I have reset the PRAM and it seems to be getting very hot. It has been trying to load in safe mode now for about 30 minutes. Does that sound right?

Soundzalive wrote:
... Sounds like a new hard drive?
Yes. Read this to determine if it applies: iMac 1TB Seagate Hard Drive Replacement Program
Whether your data can be retrieved or not is unknown. To determine the answer would require a non-trivial expense and there is no guarantee it would be successful.
Schedule a visit to the Genius Bar using the link in the above document, even if it indicates your iMac is not eligible for the replacement. Only Apple can make a final determination.

I updated the photography plan to full creative cloud suite but can't access any of the full creative cloud apps

I had a prepaid photography plan for a couple of months and then decided to upgrade to the full creative cloud suite because I needed more apps. However, I just updated today and I still don't see all of the apps. I changed my card from one I had used previously to a different one, so I'm not sure if that has anything to do with it not working yet.

I see some of the apps
This is my current view of the Creative Cloud program.
For some reason Premiere CS6 was available but I cannot find the app anywhere on my computer after downloading. It says it is functioning in creative cloud but I cannot find it. So I tried to uninstall it, but it's not working. Audition CS6 was able to download from the Creative Cloud without any issues but shouldn't it be CC not CS6? Also I need After Effects as well but I can't find that. The InDesign CS6 was a physical disc copy I had from before with a license.

I've tried everything but can't access iTunes store from my ipad. Apple ID is fine and logged in to iTunes on pc. Still no luck. Anyone any other alternatives? Thx.

I've tried everything but can't access iTunes store from my ipad. Apple ID is fine and logged in to iTunes on pc. Still no luck. Anyone any other alternatives? Thx.

You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Range Expander Looks Fine - but cant connect to Internet.

I connect to the range extender & things look fine, but I can't get onto the Internet.

What's the model number of the Range Extender as well as the model number of the Router? The Linksys Wireless Range Extender and wireless router or access point’s wireless settings should match in order for them to work properly. You must first identify the following wireless settings of your router:
• Wireless Network Name (SSID)
• Wireless Channel
• Wireless Security Mode (WPA/WPA2 Personal or WEP)
• Network Key or Passphrase
Here is the link for setting up the Range Extender:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=aeb3109289c04de7800546f43771bfe0_3760.xml&pid=80&r...

Backups on the disk, but can't access via Time Machine

Time Machine runs without announcing any errors. Browsing the Time Machine drive in Finder, I can see that TM is actually making the backups. But when I enter Time Machine, I can't access any of the backups.
This began under Snow Leopard, but not immediately upon installation. The more immediate change was when I added a new drive to serve as the Time Machine drive. From looking at the disk in Finder, it looks like the backups are all there, back to the date I plugged in the new drive (Sept 7).
Can anyone tell me why this happened? I recognize I could reformat the drive and start over to see if things start working again, but is there any way to kickstart things and preserve the existing backups?

Pondini wrote:
chicagopjp wrote:
But when I enter Time Machine, I can't access any of the backups.
What, exactly, do you see? Do you see a Finder window, labelled +Today (Now)+ ? Is there a "cascade" of Finder windows behind it, but just dark shadows, and you can't click on them? Do you see the background full of stars, and are they moving?
Yes to all of the above; exactly.
There are some things that can cause problems with the "Star Wars" display itself.
One is, it doesn't have separate preferences, so it uses the Finder's instead. If you're using Pathfinder or another Finder substitute, turn the Finder back on.
I just use Finder.
If the Finder's preference file is corrupt, it can cause problems. Delete the file
*<your home folder>/Library/Preferences/com.apple.Finder.plist* and try again.
Done --- no change.
Try the things in item #E4 of the Time Machine - Troubleshooting *User Tip.*
Done -- no change.
I do appreciate your help. Any other suggestions?

I lost an xcel doc. Tried to find the Library folder in Users not there when use Finder. But when trying to upload a photo, iphoto found the library folder I can see my doc in Office 2011 Autorecov, but can't access it! How do I get User to show Library

I lost an xcel doc a couple of days ago. Tried to find the Library folder in Users but not there when I use Finder (even when I do shift-command-G). But when trying to upload a photo in iphoto I found the library folder in Users. I can see my doc in Office 2011 Autorecovery, but can't access it! How do I get User to show Library then I can get to my long lost document?

The auto recovery dat should be in the Microsoft User Data folder in your documents folder, not in the Library. However, I Haven't had to look recently.

Since I have installed iOS 6.1.3 on my iPhone 5 I have sometimes problems to start a phone call. Everything looks fine, but no ring tone... A workaround is to stop phone app in the multitasking bar. But this is more than inconvenient ;-) Any solution?

In this cases everything looks fine, but no ring tone is there and after sometimes the phone informs me that no connection can be estabilished (its a German phone, therefore I am not sure about the message in English systems). A workaround is to stop the telephone app in the multitasking bar (double click on home button, hold the app symbol pressed for some seconds, close app). Next several call work after this.
I am not sure if an incomming call would work in this mode...
Faces anybody the same problems or has solution for it?

Basic troubleshooting
Restart
Reset
Restore with backup
restore as new if required

OC4J Startup looks fine, but can't access any samples via "localhost:8888"

Similar Messages

Maybe you are looking for