One axis of wave chart cannot change away from automatic formatting

Refer attached vi and picture. I can change the other two y axis to floating point, but I cannot change the "acceleration x,y,z" from automatic formating to floating point; whenever I click floating point, the highlight returns back to automatic formating.
Now why is that, some setting wrong some where?
Message Edited by sunflower2772 on 09-13-2009 08:00 AM
Solved!
Go to Solution.
Attachments:
Turret Motion Monitoring Software 110909b.vi ‏320 KB

Hello Sunflower2772,
I've opened your VI in both LabVIEW 8.6 and LabVIEW 2009, and could see the same behaviour in both versions.
After that, I tried a few things:
- I deleted all other scales except for the "acceleration x, y, z", but it was still the same.
- I duplicated the "acceleration x,y,z" scale, so now there are two scales - "acceleration x,y,z" and "acceleration x,y,z 2". I shifted all but 1 of the plots to use "acceleration x,y,z 2". The result was still the same.
It is really a strange behaviour, it looks to me like it could be a bug. Do you have the exact steps to replicate this problem?
Anyway, I managed to get a workaround. Using one of the normal scales "Heave, roll, pitch", I duplicated that scale by right-clicking on "Heave, roll, pitch" axis, and select "Duplicate Scale". This duplicated scale can be assigned to the individual plots again, and the display format will not be "fixed" to the automatic formatting option.
Please try it out and let me know how it goes.
Best regards,
Victor
Attachments:
Clipboard01.jpg ‏85 KB

Similar Messages

Cannot change charset from 'ISO-8859-1' to 'UTF-8' ?

I've programed a web application with Facelets. As I start the first page "index.html" I got the following exception:
"java.lang.IllegalStateException: Attempt to change ContentType after calling getWriter() (cannot change charset from 'ISO-8859-1' to 'UTF-8')"
The header of the "index.html" looks as follow:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
<meta http-equiv="refresh" content="0; url=./guess.jsf" />
<title>Untitled Document</title>
</head>
What's wrong? Is it a bug of weblogic?

same problem here with wl8.1
have you sold it and if yes, how?
thanks

IllegalStateException: (cannot change charset from 'ISO-8859-1' to 'null')

          My index.jsp page has the directive <%@ page contentType="text/html;charset=ISO-8859-1"
          %>.
          It uses my templating tag-library, which uses a requestDispatcher to include my
          template.
          My template doesn't have this contentType directive.
          Then I get an exception :
          java.lang.IllegalStateException: Attempt to change ContentType after calling getWriter()
          (cannot change charset from 'ISO-8859-1' to 'null')
          It actually works perfectly on WLS6.0.
          Here is the complete stacktrace which shows the path page -> tag -> include
          java.lang.IllegalStateException: Attempt to change ContentType after calling getWriter()
          (cannot change charset from 'ISO-8859-1' to 'null')
               at weblogic.servlet.internal.ServletResponseImpl.setEncoding(ServletResponseImpl.java:695)
               at weblogic.servlet.internal.ServletResponseImpl.setHeader(ServletResponseImpl.java:566)
               at weblogic.servlet.internal.ServletResponseImpl.setContentType(ServletResponseImpl.java:236)
               at weblogic.servlet.internal.ServletRequestImpl.reportJSPFailure(ServletRequestImpl.java:162)
               at weblogic.servlet.internal.ServletRequestImpl.reportJSPTranslationFailure(ServletRequestImpl.java:168)
               at weblogic.servlet.jsp.JspStub.reportTranslationFailure(JspStub.java:503)
               at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:317)
               at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:181)
               at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:149)
               at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:344)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:240)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
               at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:327)
               at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:207)
               at bv2.template.TemplateRequest.doStartTemplate(TemplateRequest.java:56)
               at bv2.template.BodyTag.doStartTag(BodyTag.java:31)
               at jsp_servlet._index._jspService(_index.java:173)
               at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:245)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
               at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2279)
               at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1923)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)


[att1.html]

Change photos from PDF format to Jpeg

how do I change photos from PDF format to Jpeg?

Welcome to Apple Support Communities.
Open the existing pdf file with Preview.
In preview, select File, Save As, and click on the Format window to change PDF to JPEG.
Then click the Save button.
Quality may suffer in the translation from one format to another.
In a quick test, changing Quality to 'Best' and Resolution to 300 dpi, the text in my sample page was crisp, but the original photo area was very pixelated.
The original image in the pdf file was also pixelated when viewed at 100%
A portion of the test image and text at shown at 100%. (Click on the image to view full size):
Message was edited by: kostby

Change time from number format(ie. 3.50 hours) to regular time format( ie.3:30)

How do you Change time from number format(ie. 3.50 hours) to regular time format( ie.3:30)

I performed the following function in order to get my report to view the information the way that I wanted to see it:
put this formula across from the caption âu20ACu0153Display Stringâu20AC within the âu20ACu0153Format Fieldâu20AC window for description.Â
whileprintingrecords;
MonthName(tonumber(Mid({CartonHistory.DateTimeStamp},5,2)),true) & Mid({CartonHistory.DateTimeStamp},7,2) & ", " & Mid({CartonHistory.DateTimeStamp},1,4)Â & " " & Mid({CartonHistory.DateTimeStamp},9,2) & ":" & Mid({CartonHistory.DateTimeStamp},11,2) & "." & Mid({CartonHistory.DateTimeStamp},13,2)
It converts dates from: 20061212102311xx to: Dec12, 2006 10:23.11.

TS4002 I want to view my emails with the reading pane at the bottom of the screen - I cannot change it from a vertical column view. Used to be 'classic view' in mobile me. Anyone know how to do it?

I want to read my emails in horizontal view - reading pane at the bottom of the monitor - on iCloud. I cannot change the view from vertical and columns? Anyone know how I can do this? It was called 'classic view' in Mobileme.

Thanks, got that.
That's OK on 'mail'.
My problem is on webmail - when I open my email on iCloud I have the columns and cannot find where to change the view.
Any further ideas?

How do i change over from automatically adding songs to manually adding

Using 2 ipods on the computer and don't want all of the other person's songs. How can i change from automatically adding songs to manually managing the songs that go on to the ipod. If i plug it in, i'm afraid that i will mess up all my current songs on there. Please help.

Here are the instructions as they are written in the IPod PDF manual:
In iTunes, select iPod nano in the source list and click the Summary tab.
2 In the Options section, select “Manually manage music and video.”
3 Click Apply.
Note: When you manage songs and video yourself, you must always eject iPod nano
from iTunes before you disconnect it.
To add a song, video, or other item to iPod nano:
1 Click Music or another Library item in the iTunes source list.
2 Drag a song or other item to the iPod nano icon in the source list
Hope this helps you.

Changing settings from automatic to manual sync

I've just started using my ipod nano and originally set it up to sync automatically with itunes. However, I've now downloaded a lot of things that are used for slide shows, etc. that I don't necessarily want loaded onto the ipod. How can I now change the setting to manual? I read the directions but was stumped from the very beginning when I was told to go to the "source list" and choose ipod nano. Did not know what the source list was and could find the words "ipod nano" no where. Any suggestions?

The source list is the long pane on the left hand side of iTunes where you see the icons for Music, Movies, playlists etc. When you connect your iPod it should appear in this pane under a heading named "Devices". Devices only appears when you have your iPod connected. When it shows, click on the iPod icon to bring up the preference tabs in the main section on the right. In the iPod Summary tab (which is the first tab) to "Manually manage music and videos" and click Apply. In this mode you just drag and drop whatever you want to the iPod from either library:
Managing content manually on iPod
iPod 101: Fill 'er Up
Note: When changing from automatic to manual, check the "manually manage music and videos" box in Summary then press the Apply button. "Don't" uncheck Sync Music in the Music tab, it will be unchecked by default when you choose the manual setting, if you uncheck it without setting the iPod to manual first you'll erase all the songs from your iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device. In that case use Safely Remove Hardware icon in the Windows system tray on your desktop or check this link: Safely Disconnect IPod

How to adjust x axis of line chart for dynamic values from universe

Dear All,
I am new to SAP Dashboard. I got one requirment that, user will pass single value to universe using prompt in Dashboard. Based on that prompt value / input parameter, universe will deliver data to plot line chart in my canvas. But, on every request i will get different count from universe. Like for request A = 30 records, request B = 56 records, request C = 2 records and so on.
Based on the count, i want to display line chart in my canvas which will auto fit the screen. (Auto adjustment of X axis e.g For A, last record on x axis should be 30, for B = 56 and for C =2). Please let me know, how can i achive this task?.
Note : i know, how to plot simple line chat with fix count.

This is based on the output you get for the selection, get in touch with the functional team and get an idea about maximum no of result set will appear on various selection options. Say example if the functional guy says around 100 then go ahead and map 100 cells for the series.
Then as arijit said you can use the ignore blank cell option to eliminate the blank rows in the selection.
Note: Eliminating blank cells will always work at the end of the rows, not in the middle of the rows.

Cannot change font from Lucinda Grande

Hi, recently when creating text using the text generator in FCP 5.1.2 i am unable to chance the font to anything. it is stuck on Lucinda Grande. All other drop menus are functional except for this one. Am i missing something obvious here? It has definitly worked fine before.. any ideas?
Thanks, Matt

Are you using FCP's Text tool? For me it has always been the most under-developed and unreliable part of the application. If you haven't already, try recreating your text files in Boris Title 3D (it's in the Boris folder in the Video Generators Folder in the Effects Tab of the Browser). It's easy to use and much more flexible - like allowing you to have different font styles and sizes in the same line, use a lot of cool effects in the Style Palette, etc.
Also, if you haven't already, do the old standby trash your preferences and repair permissions. Curious: can you change fonts in any other applications?

Cannot change password from OS X

I just tried to change my Skype password from my Mac running OS X 10.6.8. I tried in both Safari and Chrome, but once I put my old password in, I could not tab into the next field not select it with my mouse. I finally got my password changed by logging in from my iPad. That's funny, as it's usually the other way around. Some sites that work fine in a desktop OS don't work right in Mobile Safari.

Try booting from your 10.1 DVD and going to Utilities/Reset Password.
User Password Reset (3)

Cannot change font from italics when composing a message

Have tried changing fonts, changing from italics to bold, would reinstalling help? If so what is the procedure to save contacts and info? Reasonably proficient on the computer but no expert by any means. Thanks for any help.

''hughes251 [[#question-1046486|said]]''
<blockquote>
Have tried changing fonts, changing from italics to bold, would reinstalling help? If so what is the procedure to save contacts and info? Reasonably proficient on the computer but no expert by any means. Thanks for any help.
</blockquote>

On project load, CC7.2 on Windows 8 forces me to change scratch disk location away from Mac-formatted external HDD

When I open a project saved on my external hard drive it wants to change the scratch disks to My Documents Folder.
Once I accept it, it opens the project and then I am actually able to change the scratch disks back. Weird.
It's worth mentioning that my external drive is formatted for Mac and I bought a driver from Paragon allowing my PC to read and write to it. Idk if this is where Pr gets confused.
Windows 8.0
Pr CC latest update (todays date: 19 dec 13)
I hope someone is able to fix it.

Hi frbra1,
The reason why you are getting this prompt is just beacause the files that are saved on your scratch disk while working on MAC have location "/Volume/name of the HD/program or file name", but when you connect that drive to windows the location changes to "Drive Name:\" . So. it is the adressing issue of the drive that you are facing with the drives. It is alo not always necessary that the drives get same name when they are attached to the machine.
Regards,
Vinay

Cannot change settings from AAC to MP3 encoder although able to do so on another computer

I am frustrated as I am able to change my settings on ITunes 10 on my desktop computer, but when I downloaded ITunes10 on my notebook, I was not able to change the same settings from AAC to MP3 encoder although I clicked ok. It keeps reverting to AAC, and I am not able to rightclick my music file, as I can do on my desktop, to create a smaller mp3....
I also noticed that other checkmarks, i.e. checking "podcast" under general preferences under source revert back to unchecked when I get out.
What to do?
Thanks so much,
Anita

andreafromspringfield gardens wrote:
And what does "in the Enterprise" mean?
In a school / business / corporate environment. Used for a large deployement of iPads.
http://www.apple.com/support/ipad/enterprise/

Exchange 2010 user cannot change password from OWA

My users are not able to change their own email password from owa. But we can change the passwords from ECP or from the server without any issue. What could be the issue ?
Biju Rajan

Check the regional date and time is set for user OWA...Follow the below steps
On the Client Access Server (CAS), click Start > Run and type
regedit.exe and click OK.
Navigate to HKLM\SYSTEM\CurrentControlSet\Services\MSExchange OWA.
Right click the MSExchange OWA key and click New >
DWord (32-bit).
The DWORD value name is ChangeExpiredPasswordEnabled and set the value to
1.
Note: The values accepted are 1 (or any non-zero value) for "Enabled" or 0 or blank / not present for "Disabled"
After you configure this DWORD value, you must reset IIS. The recommended method to reset IIS is to use
IISReset /noforce from a command prompt.
Ref:http://blogs.technet.com/b/exchange/archive/2010/10/06/3411240.aspx
Exchange Queries

One axis of wave chart cannot change away from automatic formatting

Similar Messages

Maybe you are looking for