Only 1 Instance show up on Maintenance Optimizer Transaction

Dear all,
I got another issue relate to Maintenance Optimizer transaction under dswc, I have 2 satellite systems under 1 logical component.
On the first step of MO transaction , I select Product Version SAP ECC 6.0, there is only 1 system appear, in fact in my logical component there are 2 systems ( in SP Stack screen both systems appear normally)
Anyone know the cause, or there is any further set to be done ? Thanks...
Edited by: sketcher on Jun 3, 2009 3:02 PM
Edited by: sketcher on Jun 3, 2009 5:21 PM

Hi Sketcher,
In MOpz, you are selecting the product version ECC 6.0
check once if both those remote systems are difined as ECC 6.0 in SMSY or any other product version ? Second system might be defined of type ERP
and, are you able to see all the systems as 'green' in SMSY -> Solution landscape -> select that particular solution and see if the systems assigned are green or not. Also, by selecting the particular system in the same screen, once check include/exclude button and check consistency then.
and, Are you able to see EWA service sessions for both of those systems in that particular solution view ?
Try to go through these Notes
Note 1020789 - Maintenance Optimizer: Allow all systems to be selected
and if the problem is related to the product version, then you should change the product version to the type of ERP instead of ECC 6, I forgot the exact note number for this, but you can try the below one for this
Note 1022072 - Maintenance Optimizer: "No Data Available" message

Similar Messages

  • Maintenance optimizer transaction dont see product version for a solution

    Hi,
    I am having a very difficult time in understanding the concept of solution manager product system,instance,solution. Now, in Technical Administration >> Solutions >> I click on a solution, in the solution the product column is missing. Then it appears after some configuration.
    Now, when I create a maintenance optimizer transaction, I select the solution but I don't see the see product version, nothing appears.
    Please guide

    Hi Shashank,
    If I am getting you correctly then you are not getting product version in drop down in a new MOPZ transaction ?
    Use below steps:
    Run Transaction Solman_Workcenter.
    Select the Solution Manager Administration tab.
    Click Solutions.
    Either.
    Create a new Solution to add the logical component, or add it to an existing solution.
    If a new solution...
    Click on New.
    Give the solution a name.
    Set the Solution Data settings.
    Now the Solution exists.
    Select an existing solution that you want the System to be placed (can be the new one).
    Add the Logical Component to the Solution.
    If the system is other than Type Production then...
    Go to change edit mode.
    Right click on the SID, and select “Put in Solution” the cell the SID is in will turn green.
    Save.
    Regards,
    Divyanshu

  • Solman 7.0 - Question regarding "New Maintenance Optimizer Transaction"

    Hi All,
    Since I'm quite new on Solman transactions, while monitoring my queue, I found 4 tickets that says "New Maintenance Optimizer Transaction".
    This is what's inside:
    "Internal Note             SOLMAN_ADMIN 08.04.2014 08:41:25
    The status was set to the value 'Selection'"
    Can someone help me on where to find information regarding this, or if this is something I should take a look at?
    Thanks!

    Hi Bua,
    Somebody has created an new maintenance transaction from MOPZ of solman, which is used for generated XML for applying support packs and EHPs.
    Selection mean, that the user was selecting the components but has now done anything or updated the status
    Divyanshu

  • Error when trying use the Maintenance Optimizer Transaction

    I have finally gotten through a major headache setting up a SM box, but now when I try to use the maintenance Optimizer, i get the following messages and it won't go any further.
    Information Procedure 8000000051 Saved
    Warning Status was reset by system
    Warning There is already a transaction for the systems of this product version
       It stays on the screen to select the logical component and just keeps saving the procedure.  I have tried deactivating the old procedures but nothing is working.
    Any Ideals.

    There was a configuration error, fixed it

  • Urgent: Newly configured system doesn't show up in Maintenance Optimizer

    Dear Experts,
    please, I need a quick aid on the following issue:
    I have just installed a brand new Java system with usage type Development Infrastructure.
    As the system urgently requires installing the latest SPS available, I defined it in our Solution
    Manager 7.1 SP10. I have installed the diagnostics agent, then I assigned it to the system,
    I made the entire managed system configuration and everything is fine! Just when I started
    the MOPZ, in order to calculate the stack, I found out, that the system isn't displayed anywhere!!
    In the first step of the managed system configuration, I have created a new logical component
    Z_NWDI. Reviewing transaction SMSY, I saw that this logical component is not assigned to the
    solution, so I assume that this might be the problem. But I didn't find a way how to make this
    logical component a part of our solution! I have checked all the setup in LMDB, and it all seems
    to be perfect, I compared things for which I wasn't sure, with another Java system, which is
    shown in MOPZ.
    Many thanks for your help!

    Hi Symon,
    Great.
    check the whether SLD is having proper details.
    how you link the system using solution manager SLD or any other SLD. if you use other SLD also please update teh CR content.
    After the successful updation in SLD,
    https://help.sap.com/saphelp_sm71_sp05/helpdata/en/f6/a41e0402664451b9c4640ff4513527/cont
    transaction SE38 and run the report RLMDB_SYNC_TECHNICAL_SYSTEM
    .( it will delete the old data and re-synchronize from the SLD )
    and select the below option and execute it. so it will delete and re-create the latest details.
    once issue is solved. please close this thread.
    Rg,
    Karthik

  • Problem with Maintenance Optimizer...

    Hello gurus,
    I had a problem which I didn´t reached a solution...
    When I create a new maintenance optimizer transaction and choose, on first step "Plan Maintenance", a type of Product Version I don´t have all systems which I configure on this Product Version on SMSY (System Landscape Directory).
    For instance: I configure in SMSY the Product version (group) SAP ECC 6.0 which contains three systems DEV ; QAS ; PRD.
    When I open/create a new maintenance optimizer transaction and choose the SAP ECC 6.0 I only see one system, the DEV system, within his, and I want to see all three systems which I configure in SMSY!
    Help me please...! TKS
    Best regards,
    Joao Dimas

    Hi Vijay,
    When I press in that URL - http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000679533& - does not appear anything about maintenance optimizer guide... it show me a notify "This folder needs to be reviewed" and I can´t see anything like you describe... I´m newest in SAP and still I have difficulties on search sometimes some things...
    The link above, have you sure that's correct?
    What´s the exactly name of document that you refer??
    Thanks in advance,
    Best regards,
    Joao Dimas

  • Solution manager maintenance optimizer

    Hi all,
    I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pull the information from SLD perfectly fine, and it lists all installed software components via SMSY>SYSTEMS perfectly. I have assigned logical components etc. I can create a new maintenance optimizer transaction, select the proper system with assigned components, but when it lists the files to be downloaded automatically I expect to see alot more files available for download than it lists for me. I assume I am missing something, but not sure where to look.
    Would anyone be able to possibly point me in the right direction on what I might be missing?
    Regards,
    Chris

    Hi Markus,
    The system is SAP EHP1 for SAP Netweaver 7.0. It has the following components installed and specified in logical components:
    Adobe Document services
    Application server Java
    EP Core
    Enterprise Portal
    Along with the kernel files I also get the following files available for download via maintenance optimizer (6 in total)
    FORUMS06_0-10005892.SCA SP06 for FORUMS 7.01
    BP_PROJ_PORT_DESIGNCOLL
    BPPPMDC17_0-10003174.SCA BP PROJ., PORT. & DCOL. 4.0 SP17
    BP ERP05 PROJ SELF-SERV
    BPERP5PSS17_0-10003284.SCA BP ERP05 PROJ SELF-SERV 1.0 Support Package 17
    BP ERP05 MAINTENANCE TECH
    BPERP5MTC07_0-10004455.SCA SP07 for BP ERP05 MAINTENANCE TECH 1.2
    BP ERP SITE TECHNICIAN
    BPIS7TST07_0-10004458.SCA SP07 for BP ERP SITE TECHNICIAN 1.20
    BP ERP ICM ANALYST
    BPIS7ICMAL06_0-10006119.SCA SP06 for BP ERP ICM ANALYST 1.41
    When I look at installed system components via SMSY it correctly shows everything installed which includes:
    ADOBE DOCUMENT SERVICES 7.01 0006 SP006 ADOBE DOCUMENT SERVICES 7.00
    BI BASE SERVICES 7.01 0006 SP006 BI BASE SERVICES 7.01
    BI INFORM. BROADCASTING 7.01 0006 SP006 BI INFORM. BROADCASTING 7.00
    BI META MODEL REPOSITORY 7.01 0006 SP006 BI META MODEL REPOSITORY 7.01
    BI REPORTING AND PLANNING 7.01 0006 SP006 BI REPORTING AND PLANNING 7.01
    BI UNIVERSAL DATA INTEGRATION 7.01 0006 SP006 BI UNIVERSAL DATA INTEGRATION BI UDI 7.01
    BI WEB APPLICATIONS 7.01 0006 SP006 BI WEB APPLICATIONS 7.00
    BI WEBDYNPRO ALV 7.01 0006 SP006 BI WEBDYNPRO ALV 7.01
    BP ERP FIN MDM 1.40 0006 SP006 BP for Financial MDM 1.40
    BP ERP HR EIC 1.40 0006 SP006 BP für HR Employee Interaction Center 1.40
    BP ERP ICM ANALYST 1.41 0004 SP004 BP for ICM-Analyst 1.41
    BP ERP RECRUITER 1.40 0006 SP006 BP for Recruiter 1.40
    BP ERP RECRUITING ADMIN 1.40 0006 SP006 BP for E-Recruiting Administrator 1.40
    BP ERP SITE TECHNICIAN 1.20 0006 SP006 BP for Site Technician (Telecommunications) 1.20
    BP ERP UT XSS 1.40 0006 SP006 BP ERP UT Definition für Self Service BP 1.40
    BP ERP05 BUS UNIT ANALYST 20 1.0 0017 SP017 BP for Business Unit Analyst (mySAP ERP) 1.0
    BP ERP05 COMMON PARTS 1.41 0006 SP006 BP ERP05 COMMON PARTS 1.41
    BP ERP05 ESS 1.41 0006 SP006 BP for Employee Self-Service 1.41
    BP ERP05 HR ADMINISTRATOR 1.41 0006 SP006 BP for HR Administrator (mySAP ERP) 1.41
    BP ERP05 MAINTENANCE TECH 1.2 0006 SP006 BP for Maintenance Technician 1.2
    BP ERP05 MSS 1.41 0006 SP006 BP for Manager Self-Service 1.41
    BP ERP05 PROJ SELF-SERV 1.0 0016 SP016 BP for Project Self-Service (mySAP ERP) 1.0
    BP ERP05 SELF-SERV ADMIN 1.0 0017 SP017 BP for Self-Service Administrator (my SAP ERP) 1.0
    BP ERP05 TALENT DEV 1.01 0010 SP010 BP for Talent Development Specialist 1.01
    BP_PROJ_PORT_DESIGNCOLL 4.0 0015 SP015 BP for Project Portfolio Management and Design Collaboration 4.0
    CAF EU 7.01 0006 SP006 SAP Net Weaver End User 7.01
    DI BUILD TOOL 7.01 0000  SAP BUILD TOOL 7.01
    DI CHANGE MANAGEMENT SERVER 7.01 0006 SP006 CHANGE MANAGEMENT SERVER and SXMAN 7.00 701
    DI COMPONENT BUILD SERVER 7.01 0006 SP006 COMPONENT BUILD SERVER 7.01
    DI DESIGN TIME REPOSITORY 7.01 0006 SP006 DESIGN TIME REPOSITORY 7.01
    FORUMS 7.01 0005 SP005 FORUMS 7.01
    J2EE ENGINE BASE TABLES 7.01 0006 SP006 BASETABLES
    J2EE ENGINE CORE TOOLS 7.01 0006 SP006 CORE TOOLS J2EE ENGINE
    JAVA LOG VIEWER 7.01 0006 SP006 SAP JAVA LOG VIEWER 7.01
    JAVA SP MANAGER 7.01 0006 SP006 JAVA SP MANAGER 7.00
    KMC BASE COMPONENTS 7.01 0006 SP006 KMC BASE COMPONENTS 7.01
    KMC COLLABORATION 7.01 0006 SP006 KMC COLLABORATION 7.01
    KMC CONTENT MANAGEMENT 7.01 0006 SP006 KMC CONTENT MANAGEMENT 7.01
    KMC UI LAYER 7.01 0006 SP006 KMC UI LAYER 7.01
    KMC WEB PAGE COMPOSER 7.01 0006 SP006 KMC WEB PAGE COMPOSER 7.01
    LIFECYCLE MGMT PORTAL 7.01 0006 SP006 LIFECYCLE MGMT PORTAL 7.01
    LIFECYCLE MGMT TOOLS 7.01 0006 SP006 LIFECYCLE MGMT TOOLS 7.01
    MI ADMINISTRATION 7.01 0006 SP006 MI ADMINISTRATION 7.01
    MI DRIVERS 7.01 0006 SP006 MI DRIVERS 7.00
    MI WD LAPTOP 7.01 0006 SP006 Net Weaver Mobile Infrastructure Web Dynpro LAPTOP 7.00
    PDK PORTAL SERVICES 7.01 0006 SP006 PDK PORTAL SERVICES 7.00
    PORTAL CORE SERVICES 7.01 0006 SP006 EPBC 7.01
    PORTAL FRAMEWORK 7.01 0006 SP006 EPBC2 7.01
    PORTAL PLATFORM 7.01 0006 SP006 EP - Portal Server PORTAL 7.01
    PORTAL WEB DYNPRO 7.01 0006 SP006 PORTAL WEB DYNPRO 7.01
    RTC 7.01 0006 SP006 RTC 7.00
    RTC-STREAM 7.01 0006 SP006 RTC-STREAM 7.00
    SAP CAF 7.01 0006 SP006 SAP CAF 7.01
    SAP CAF-KM 7.01 0006 SP006 SAP CAF-KM 7.01
    SAP CAF-UM 7.01 0006 SP006 SAP CAF-UM 7.01
    SAP CPS BASIC (SCHEDULER) 7.01 0004 SP004 Job scheduling capabilities of SAP NetWeaver 7.01
    SAP ESS 603 0006 SP006 SAP ESS 603
    SAP INTERNET KNOWLEDGE SERVLET 7.01 0006 SP006 SAP Internet Knowledge Servlet 7.00 (SAP J2EE IKS)
    SAP J2EE ENGINE 7.01 0006 SP006 SAP J2EE Engine 7.01
    SAP J2EE ENGINE CORE 7.01 0006 SP006 SAP J2EE ENGINE CORE 7.01
    SAP JAVA TECHNOLOGY S OFFLINE 7.01 0006 SP006 SAP JAVA TECHNOLOGY S OFFLINE SAP TECH S OFFLINE 7.01
    SAP JAVA TECHNOLOGY SERVICES 7.01 0006 SP006 SAP JAVA TECHNOLOGY SERVICES (Schicht 3 Dummy) SAP JAVA TECH SERVICES 
    SAP MI CLIENT 7.01 0006 SP006 SAP Mobile Infrastructure Client 7.0
    SAP MSS 600 0017 SP017 SAP MSS 600 (Manager Self Services)
    SAP PCUI_GP 603 0006 SP006 SAP PCUI_GP 603
    SAP SOFTW. DELIV. MANAGER 7.01 0000  SAP JAVA SL 7.01
    SOFTWARE LIFECYCLE MANAGEMENT 7.01 0006 SP006 SOFTWARE LIFECYCLE MANAGER 7.01
    UME ADMINISTRATION 7.01 0006 SP006 UME ADMINISTRATION 7.01
    UWL COLL PROCESS ENGINE 7.01 0006 SP006 UWL COLL PROCESS ENGINE 7.01
    VISUAL COMPOSER BASE 7.01 0006 SP006 VISUAL COMPOSER BASE 7.00
    VISUAL COMPOSER BI KITS 7.01 0006 SP006 VISUAL COMPOSER BI KITS 7.00
    VISUAL COMPOSER FLEX 7.01 0006 SP006 VISUAL COMPOSER FLEX 7.00
    VISUAL COMPOSER FRAMEWORK 7.01 0006 SP006 VISUAL COMPOSER FRAMEWORK 7.00
    VISUAL COMPOSER GP KITS 7.01 0006 SP006 VISUAL COMPOSER GP KITS 7.00
    VISUAL COMPOSER XX KITS 7.01 0006 SP006 VISUAL COMPOSER XX KITS 7.00
    WEB DYNPRO EXTENSIONS 7.01 0006 SP006 WEB DYNPRO EXTENSIONS 7.01
    I expect to see more than the 6 previously mentioned files available for download, also the option for EHP2 which I know is available, or am I wrong in expecting this.

  • Error in maintenance optimizer generating Stack File XML

    Hi all,
    In step 3 "Download Files" of maintenance optimizer transaction to implement the EHP5 of ERP, In the tab "Log" I see the following error.
    *Collecting XML adjustment input data done with error or warning.
    Message no.AGS_MOPZ_PLAN_MSG144*
    The stack XML file is very very important to the ehpi installer, then I need to know which implications have the error below...
    I create 3 Maintenance Optimizer transactions, and in all of them, the error appears.
    Thanks  a lot.

    Hello,
    Please check if the SPAM level of the Solution Manager is the latest.
    If this does not help, please check the details about the error message in transaction SLG1 (this transaction is the full application log). There should be extra text / error message explaining the situation, you only have to look for the error around the time when you got the 'Collecting XML adjustment input data done with error or warning' message.
    Best regards,
    Miguel Ariñ

  • Maintenance optimizer downloads error

    Hi,
    While I am doing the downloads for EHPI Upgrade but after choosing target, it gives me this error.
    Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
    Requested Attribute Change Package 'EA-IPPE===400' not deliverable.
    Message no.BORMMSGDELTACALC164
    Please help
    Thanks

    Hello,
    I see that the ACP 'EA-FINSERV617' is released for customers.
    I cannot find any issue with the settings for this package.
    Perhaps there is an issue in the marketplace. The package might have been moved, or the file has been renamed. In this case, the only way would be to create a new Maintenance Optimizer transaction.
    Best regards,
    Miguel Ariño

  • Deleting existing maintenance items in maintenance optimizer

    Hi all,
    is it possible, to delete existing maintenance items in maintenance optimizer?
    Kind regards
    Andreas

    It is possible to delete the maintenance optimizer transaction using the steps below:
    SE38
    -> Run report "CRM_ORDER_DELETE"
    -> Enter the maintenance transaction number(ID) of the transaction in "Business Transaction Number" and "SLMO" for "Business Transaction Type"
    -> Execute
    If the client role is set to 'Production', you would need to temporarily set it to 'Customizing' in order to delete the MOPZ transaction via the report above.
    In general, it is possible to follow the note 1329247 and use the archiving object CRM_SERORD with transaction type SLMO to
    archive maintenance optimizer transactions. Please note that only maintenance optimizer transactions with status "Completed" or "Withdrawn" can be archived. The transactions can be displayed using transaction code "/tmwflow/maintenance".
    It is possible to archive EWA services via the report RDARCH_ARCHIVE_DATA_SOLMAN as described in note 546685.

  • How to delete the redundant sessions in Maintenance Optimizer?

    Hi experts,
    As it said in title, how to delete the expired sessions as the screenshot below in Maintenance Optimizer and keep SAP Solution Manager clean?
    Thank you in advance.
    Best Regards,
    Pany

    Hello,
    Check here Deleting existing maintenance optimizer transactions
    Please  refer to the note 845433 , with the report CRM_ORDER_DELETE  and transaction type SLMO,you can delete those maintenance optimizer, hope this help to you
    BR,
    K.

  • Maintenance Optimizer - Selection of Main Instances

    Hello.  I have configured a Landscape Component in transaction SMSY.  There is a tab called "Selection of Main Instances".  
    It seems that tab drives what I see when I run the maintenance optimizer.  The checkboxes selected there determine what components that I see when creating a new maintenance transaction.  
    Is there a way to populate those check boxes from the satellite system.  It seems like there is a gap here.  Manually configuring that can lead to errors - the exact thing Sol Man is supposed to prevent.  
    Note the "software components tab" is automatically populated from the satellite, but it does not affect the maintenance optimizer.

    Hello,
    Make sure that following things are OK :
    - Solution Manager should be patched to the latest release
    - The ERP 6.0 system must have the product version SAP ERP 6.0. Make sure that it is not accidentally maintained as SAP ECC 6.0.
    Also have a look at these OSS-notes:
    SAP Note 1122966 Maintenance Optimizer: Notes for Enhancement Packages
    SAP Note 1287216 Maintenance Optimizer: pre-select technical usages
    SAP Note 1139602 Several enhancement package releases on one system
    SAP Note 1134872 Maintenance Optimizer: FAQ for Stack Delta Files
    SAP Note 1233954 Maintenance Optimizer: No XML Generated in EPS Inbox
    SAP Note 1172948 SAP Solution Manager - Basic functions
    Wim

  • Maintenance Optimizer List displays many unfinished transactions

    Hello,
    In our solution manager, many unfinished maintenance transaction are displayed:
    <i>8000000080 New Maintenance Optimizer procedure 3: Medium New 15.10.2007 05:30:05 DDIC
    8000000071 New Maintenance Optimizer procedure 3: Medium New 24.09.2007 07:52:45 DDIC
    8000000070 New Maintenance Optimizer procedure 3: Medium New 12.09.2007 22:13:56 DDIC</i>
    These are not relevant and were created while training. How can I get rid of them??
    Any help appreciated.
    regards, Shantanu

    Hello,
    We still cannot get rid of this one. Any experts on these please??
    regards, Shantanu

  • Upgrade button missing in maintenance optimizer of Solution manager

    Hi,
    We are going to perform upgrade R/3 4.7*110 Non uniocde to ERP 6.0 EHP non unicode.
    We used SAP EHP 1 for SAP Solution Manager 7.0 and support packake for SAP EHP 1 for SAP Solution Manager 7.0 is 24.
    Applied following OSS notes  pertaining to MOPZ  :
    0001450757
    0001461849
    0001485385
    0001548530
    0001590226
    COnfigured using tx code SMSY - Product System is SAP ERP and product version is SAP ERP 2004.
    Created logical components and assigned to <SID> of R/3 4.7 Development system.
    Then created solution and configured solution landscape  . Logical component was assigned to solution landscape.
    Then clicked on "Create new Optimizer transaction"
    Then select product version : ERP 2004
    Then select Product system  and selected <SID>.
    But  only "maintenance" button was displayed.
    However "Upgrade with enhancement package" button is not showing.
    Please help us the solution.
    Thanks
    ap

    A Prasad Rao wrote:
    Hi Sunny
    > For R/3 4.7*110 product name is ERP and product version is ERP 2004
    >
    >  I want upgrade button or upgrade with Enhancement package button should appear
    >
    > It seems we need to apply some OSS notes but coul not find anything becasue SP stack  for solman installed was 24.
    >
    > Please help
    > Thanks and Regards
    > APR
    As I said earlier, you need to register it as ERP 6.0 only to get Enhancement Package installation button. There is no other option for it. If you want to confirm then check How to install EHP4 guide on http://service.sap.com/erp-ehp.
    Thanks
    Sunny

  • Configuring Maintenance Optimizer issue

    Hi All,
    This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
    I followed the IMG guide step by step.
    But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
    Instead I get a message:
    <b>Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
    Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
    Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).</b>
    Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
    Please do let me know what would be the issue.
    I have followed the note 990534 and doen with the BC sets.
    But I am not sure where am I making a mistake.
    One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
    I have completed the solution landscape, logical component, etc.
    Please help...
    Regards,
    Sapfan

    Hi JP,
    My current SP levels are:
    SAP_BASIS - 0011
    SAP_ABAP - 0011
    PI_BASIS 2005_11 - 0011
    ST-PI 2005_11 - 0003
    SAP_BW - 0011
    SAP_AP - 0007
    BBPCRM 5 - 0007
    CPRXRPM - 0007
    ST400 - 0010
    ST-ICO - 0008
    ST-SER - 0007
    The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid  SAPRouter once all the SM config is done.
    I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
    I changed back the UME source to client 001, but still same.
    Moreover the maintenance optimizer is not showing the satellite system.
    I am really stuck.
    Please let me know if you require more information.
    I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
    I started this only after applying SP10.
    Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
    WIll the system not reflect is the java ebngine is down???
    Regards,
    P.K

Maybe you are looking for