Operation Mode in OWB
If we are executing OWB mappings in SQL*Plus in stand alone mode we will give
-Operating_mode=1 for SET based
-Operating_mode=0 for ROW based and so . . .
Is there any documentation or proof for such a mode setting option. If so kindly give me the where abouts.
Regards,
Gandhi
Hi
It s nothing but the NORMAL operation Mode or NIGHT operation mode
So you can define the relative operation moade and accordingly can set the time to execute the job as per the settings.
You can enter any name for the operation mode, but ensure that it is meaningful and that it makes the task of the operation mode clear.
<b>Reward points for useful Answers</b>
Regards
Anji
Similar Messages
-
Generating code in OWB mapping for valid operating modes
Hi all,
When i generate the map in OWB it will generate a code in default operating mode. But it's written in OWB documents that During code generation, Warehouse Builder generates code for the specified default operating mode as well as the unselected modes.
Can i find the generating code for the unselected modes? If possible then how can i find? Plzz help.
Regards,
SumantaHi Sumanta.
If my understanding is right than you are looking for a error handling feature in OWB. Well in such case you need to look at the concept of Shadow Tables in OWB. TO know more about the fucnctionality of shadow tables please follow this link.
Using Data Rules
It has most of the information. If you still hav any clarifications, you can post it here.
I dont know much about operating modes.
Hope this is what you were looking for! -
How to change the 'Default operating mode' of a mapping on the repository and not from the client
Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
AlessandroUrgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around? -
Information About Default Operating Mode
Hello,
Someone can help me and give me a good documentation that explain what do the SETBASED mode, ROWBASED, ROWBASED (target only), with schemas it will be exellent.
I know a little the differences between but i will to learn that in detail.
I ask that because we have to make programs that are the most optimize (time of execution) and the Operating Mode is very important.When a mapping runs in a set-based mode, the rows are processed as a single dataset, with a single SQL statement that is either completed successfully for all the rows or fails if there is a problem with even one row. This is generally the fastest way of processing data.
When a mapping runs in a row-based mode, the data can be extracted from the source one at a time, processed and inserted in the target. If there is a problem with some rows, this is logged and the processing continues.
Needless to say, the set based operating mode is faster in all cases, while the row based operating mode gives more control to the user, both in terms of logging row-by-row processing information as well as in terms of control over the management of incorrect data.
The default operating mode is the set based, fail over to row based mode in which Warehouse builder will attempt to use the better-performing set-based operating mode, but will fall back to the more granular row-based mode if data errors are encountered. This mode allows the user to get the speed of set based processing but when an unexpected error occurs it allows you to revert to row based mode.
The operating modes Row Based (Target Only) and Set Based Fail over to Row based (Target Only) are a compromise between the set based and the row based modes. The âtarget onlyâ modes will use a cursor to rapidly extract all the data from the source, but will then use a row-based mode to insert data into the target, where errors are more likely to occur. These modes should be used if there is a need to use the fast, set based mode to extract and transform the data as well as a need to extensively monitor the data errors.
I am currently writing a paper on OWB performance, and if you are interested, drop me an e-mail ([email protected]) and I will send you a draft version of it.
Regards:
Igor -
Urg:"At operation mode" in background job scheduling
Hi Folks,
I am doing background job for a program. Pls tell me the usage of "At operation mode" in detail.....If any coding is required pls also let me the way to do....Hi
It s nothing but the NORMAL operation Mode or NIGHT operation mode
So you can define the relative operation moade and accordingly can set the time to execute the job as per the settings.
You can enter any name for the operation mode, but ensure that it is meaningful and that it makes the task of the operation mode clear.
<b>Reward points for useful Answers</b>
Regards
Anji -
Logs for 'Operating mode' change in mirroring
Logs for 'Operating mode' change in mirroring
Hi Everyone,
Is there any log,that shows when the Operating mode of a database involved in mirroring(SQL SERVER 2008 R2) has been changed from asynchronous to synchrous(or vise versa).
Regards,
Aspet
A.GTry looking into trace log files
DECLARE @filename VARCHAR(100), @filenum int
SELECT @filename = CAST(value AS VARCHAR(100))
FROM fn_trace_getinfo(DEFAULT)
WHERE property = 2
AND traceid = 1
AND value IS NOT NULL
SELECT @filename
SELECT @filename = substring(@filename, 0, charindex('_', @filename)+1) + convert(varchar, (convert(int, substring(left(@filename, len(@filename)-4), charindex('_', @filename)+1, len(@filename)))-4)) + '.trc'
SELECT @filename
SELECT gt.EventClass,
te.Name AS EventName,
gt.TEXTData,
gt.NTUserName,
gt.NTDomainName,
gt.HostName,
gt.ApplicationName,
gt.LoginName,
gt.SPID,
gt.StartTime,
gt.EndTime,
gt.ObjectName,
gt.DatabaseName,
gt.FileName
FROM [fn_trace_gettable](@fileName, DEFAULT) gt
JOIN sys.trace_events te ON gt.EventClass = te.trace_event_id
WHERE EventClass = 116
AND TEXTData LIKE '%Alter
database%'
ORDER BY StartTime;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Blog:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance -
Unable to change the operating mode in informatica admin tool.
hi
i have installed Informatica 8.6.0
my repository service is running . and i have also created the integration service but its not running, the reason as i fount out in various blogs is that my repository is iin exclusive mode .
so , i tried to change it to normal mode . but the problem is as i select normal in the drop-down list in general properties operating mode option and click ok , nothing's happening a and the page error is coming as shown below:
Can't move focus to the control because it is invisible ,not enabled or of a type that does not accept the focus
Is this an error of internet explorer ??? i am using IE 7.or are there any options that i need to enable???
what should i do in this case???
plz help !!!!
Edited by: Nikhil.S on Jun 8, 2011 3:37 AM
Edited by: Nikhil.S on Jun 8, 2011 3:41 AMI got the same error and after I tested with firefox and everything.. I found out the issue (in my case):
- Under Database properties, The value for "ConnectString" property contains a space at the end.
-Example "host.oracle.com "
- Solution: I remove the space at the end , save it, and Now I can modify the operatingmode to Exclusive
Edited by: hcamacho on Jun 24, 2011 1:53 PM -
Manual Switch over the operation modes
Hi,
What's is purpose of RZ03(Manual Switch Over the Operations Modes)? Where extactly useful?
Regards
Basis AdminHi,
Operation Modes are the best way to change the amount of processes in the system, Administrators usually prefer more dialog processes during the day to deal with the users requests and more batch processes during the night to deal with all the system jobs, reports, archiving, etc.. The manual switch is used to change the Operation mode instantly to deal with a special demand, like heavy reporting, special month end jobs, testing, etc...
Hope this help!
Juan
Please reward with points if helpful -
Can't switch operation mode after backup offline
Hello:
Every sunday system stop at 9:30 a.m to backup offline at 16:00p.m
System start at 23:00 p.m.
Operation mode
Day : 7:00 a.m 22:00 p.m
Night 22:00 p.m 7:00 a.m
This monday dont switch operation mode night to day and disp+work get
busy .
Nobody could access the system until it is manually reset.
Can anybody help us?
Regards.You have following options.
1 .try to adjust the operation mode as example given below.
Add an additional operation mode Except for the duration of backup .
Example:
7:00 a.m. - 7:00 p.m. DAY (normal operation mode)
7:00 p.m. - 7:00 a.m. NIGHT (normal operation mode)
3:00 a.m. - 4:00 a.m. EXCEPT (Backup operation mode)
4:00 a.m. - 7:00 a.m. NIGHT (exception operation mode)
2.See if you get and error message in sm21 after offline backup.
3.delete the operation mode and create new .
4.try to change the timings of day and night operation mode.
what is your OS and DB and Rel?
hope it helps.
Amit -
Profile consistency check when operation mode change
If the number of work processes in the profiles is changed, the system can no longer switch operation modes until after a restart of the instance. It's therefore necessary to adjust the configuration of the operation modes after a change to the profiles.
In above paragraph, I don't understand why the system can not switch mode if the number of wp in profile is changed? Does system will compare wp number in profile with currently running wp number before the operation mode switch? Please advise.
Thanks.
JamesYes, I can understand it, when the number of work processes is changed, we need redefine the operation mode.
But I am confused this sentence "If the number of work processes in the profiles is changed, the system can no longer switch operation modes until after a restart of the instance. "
After the number of work processes in profile is changed, I think it will not impact instance immediately until restart the instance. According to this sentence, it seems when I change the parameter in profile, it impacts the instance immediately and the system can not switch operation mode right now if we don't restart the instance. Is it reasonable? And I think the operation mode still need redefine even if we restart the instance, since scenario in Ralph's description. Is my thought right?
Thanks so much.
James -
Unvisible tables in the operating mode (MAC)
hi everyone
a customer did install the contribute cs4 for macintosh.
i know contribute only for windows.
is it possible that he doesn't see the tables in the
operating mode?
i can't overtake his screen to see it.
thankscan you rephrase the question?
are they trying edit a page that has html tables in it, but
they don't see
the table cells in ccontribute?
url address to the page they are trying to edit?
is the html syntax in the page correct?
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
NCipher server not in operational mode : Cisco NAC
One of the NAC server got rebooted and then while restart i am getting an error nCipher server not in operational mode. Please change the settings on back of the card. Also error-sshd-server not running.
Please let me know how to make the ncipher in operational mode and change the mode of NAC in FIPS mode.
It is very urgent. Please let me know the solution.
Regards,
TarunavaThe Cisco NAC is 3315 and software version is 4.1.2.
Below are the error logs.
[root@PLHO_CAS_01 ~]# cd /perfigo/common/bin/
[root@PLHO_CAS_01 bin]# ./test_fips.sh info
Installed FIPS card is nCipher
Info-FIPS file exists
NFastApp_Connect failed: ServerNotRunning
Error-card is not in operational mode
Error-httpd worker is in Non FIPS mode
Error-sshd not up
System not in FIPS mode
[root@PLHO_CAS_01 bin]#
[root@PLHO_CAS_01 ~]# /etc/init.d/sshd start
Starting sshd:WARNING: initlog is deprecated and will be removed in a future rel
ease
key_load_private_pem: RSA_blinding_on failed
Could not load host key: /root/.perfigo/sec/tomcat.key
Disabling protocol version 2. Could not load host key
sshd: no hostkeys available -- exiting.
[FAILED]
[root@PLHO_CAS_01 ~]# /etc/init.d/httpd start
Starting httpd: Syntax error on line 167 of /etc/httpd/conf/httpd.conf:
DocumentRoot must be a directory
[FAILED] -
What are Operation Modes?
I would just like to have deeper meaning with regards to Operation Modes. What are operation modes? Does this basically means that we can allocate additional resources (in terms of work process) to a specific operation? For instance, we need additional background work processes at night, we could simply switch the operation mode that is defined to add several background work processes for night? Is that it?
Are there any subtraction or addition of work processes? For instance, from only existing 5 background processes, we can make it to 10 background processes by activating or switching the operation mode?
Or is it simply reallocation of work processes to give way to the more priority in-need work processes? If it is simply reallocation? From what work process are we reallocating from? Does it signify that we can allocate several dialog work proceses and make it background processes? From 10 dialog process and 3 background process, we'll allocate 5 from dialog process to make the background process into 8?
Or is it simply reallocation of the current setting of the work processes? For instance, you have a total of 10 background processes defined in the profile parameter, then you set 2 bacground processes for day and 8 work processes for night. Is that it?
Which is the correct notion? Kindly clarify. Thanks.Hi,
Operations modes just change the role (from DIA to BTC for exemple) of some work processes.
It is not possible to change the total number of work processes.
If necessary, It is possible to switch manually operation modes with RZ03.
On our systems we have 3 operation modes : Day, Night and Exceptional.
Day and Night are switched automatically with the time.
Exceptional mode is switched on manually very rarely when there is an "exceptional" need...
One trick to know : you need at least one UPD our UP2 process on a DI to be able to change the number of these processes vi operation modes.
Regards,
Olivier -
Wrt300n "Operating Mode" missing
Hi i have a wrt300n v2 (firmware 2.00.17) being a bit of a pig
i seams to think that it is ppoe modem all the time, i have an adsl modem hooked in there but wont find an route to this
if there adsl modem is pluged in to the wan port (with nat switched on and on a diffrent subnet)and setup that way it works (with port farding prblems and other things up)
my help page said the should be a "Operating Mode" drop down in the
setup ---> advanced routing
page but no for me theres not any one got any ideas
davidkI found my answer as to why it doesn't work. SSD and HDD write and read memory differently. Even booting the OS was different for Windows 7 hence the OS errors.
-
Hi Everyone,
Good day!
We have WS-SUP720-3BXL and WS-F6700-DFC3CXL installed on 7609-S router and based on this link http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/107258-C6K-PFC-DFC-CFC.html the Resultant mode should be PFC3BXL. However, as shown below, the PFC operating mode becomes PFC3B.
Router#sh platform hardware pfc mod
PFC operating mode : PFC3B
Following are the modules installed in our router.
Router#sh mod
Mod Ports Card Type Model Serial No.
4 8 CEF720 8 port 10GE with DFC WS-X6708-10GE XXXXXXXXX
5 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL XXXXXXXXX
6 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL XXXXXXXXX
Mod MAC addresses Hw Fw Sw Status
4 001f.6ca4.2588 to 001f.6ca4.258f 2.1 12.2(18r)S1 12.2(33)SRE9 Ok
5 001f.6c77.8448 to 001f.6c77.844b 5.9 8.5(3) 12.2(33)SRE9 Ok
6 001a.a22d.b200 to 001a.a22d.b203 5.10 8.5(3) 12.2(33)SRE9 Ok
Mod Sub-Module Model Serial Hw Status
4 Distributed Forwarding Card WS-F6700-DFC3CXL XXXXXXXXX 1.0 Ok
5 Policy Feature Card 3 WS-F6K-PFC3BXL XXXXXXXXX 1.11 Ok
5 MSFC3 Daughterboard WS-SUP720 XXXXXXXXX 4.0 Ok
6 Policy Feature Card 3 WS-F6K-PFC3BXL XXXXXXXXX 1.11 Ok
6 MSFC3 Daughterboard WS-SUP720 XXXXXXXXX 4.1 Ok
Mod Online Diag Status
4 Pass
5 Pass
6 Pass
The problem now is that I am seeing the messages below and the maximum value that I can enter for mls cef maximum-routes is 239K only instead of 1M.
%MLSCEF-SP-4-FIB_EXCEPTION_THRESHOLD: Hardware CEF entry usage is at 95% capacity for IPv4 unicast protocol.
Based on this link, http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/117712-problemsolution-cat6500-00.html WS-SUP720-3BXL and WS-F6700-DFC3CXL has a Default IPv4 TCAM Space of 512K but I'm only getting the following.
Router#sh mls cef max
FIB TCAM maximum routes :
=======================
Current :-
IPv4 + MPLS - 192k (default)
IPv6 + IP Multicast - 32k (default)
Please advise what seems the problem.
ThanksWas the WS-X6708-10GE inserted some time after the router was last reloaded? Cisco's PFC/DFC FAQ states that mixing different types of PFCs and DFCs affects OIR (online insertion and removal) - i.e. the router needs to be reloaded with the line-card installed in order for that PFC/DFC combination to work as expected (or even to work at all) - and although I couldn't find PFC3BXL+DFC3CXL as an explicit example of such situation, a reload might be worth a shot if the downtime is not too much trouble...
Maybe you are looking for
-
Dear Experts, We are using business role concept.Only business roles are assigned and not technical roles. Requirement is To assign business role from GRC Prod system to ECC DEV and ECC QA also apart from ECC Prod. To do so we have a logical group SA
-
Please Help::How to display a Map with LIsts as Keys and Values using JSTL
Hi, I need some assistance on how to display a Map in JSP using struts or core JSTL. I have a HashMap which has a List of keys and each key maps to a value of an ArrayList.i.e I have an ArrayList of taxCodes and each taxCode maps to a value of taxDet
-
MAX: how to create a Calculated Channel based on two physical channels?
Good morning, I need to configure some tasks in MAX with Virtual Channels that are calculations based on physical channels. I saw this article : http://digital.ni.com/public.nsf/allkb/1BFCE6FAD5B3944986256D67006DF7EC but cannot see the equivalent in
-
One job with two steps - how to create one single spool?
Hello experts, I have created two queries in SQVI. One is based on the table BSIK, the other on on BSAK. The report layout is the same in both queries. Now I schedule one job in SM36/SM37 with two steps corresponding to my queries. I want my second s
-
We're having screen redraw issues when panning and zooming pages. Getting screen anomolies and jittery display performance. It only happens when using InDesign, no other apps exhibit similar issues. PC specs are: WinXP Prop SP2 Dell Optiplex GX620, 2